標準號 |
中文名稱 |
英文名稱 |
| DIN 58397-2-1983 |
精密機械光學儀器潤滑脂的檢驗.攤鋪特性 |
(Testing of lubricating greases for precision engineering and optical instruments; spreading) |
| DIN 58400-1984 |
精密機械漸開線圓柱齒輪基準齒形 |
(Basic rack for involute teeth of cylindrical gears for fine mechanics) |
| DIN 58405 Bb.1-1972 |
精密加工用正齒輪傳動裝置.計算表格 |
(Spur gear drives for fine mechanics; calculating sheet) |
| DIN 58405-1-1972 |
精密加工用正齒輪傳動裝置.適用范圍.概念.測定參數.分類 |
(Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification) |
| DIN 58405-2-1972 |
精密加工用正齒輪傳動裝置.傳動機構配合的選擇.公差.偏差 |
(Spur Gear Drives for Fine Mechanics; Gear Fit Selection, Tolerances, Allowances) |
| DIN 58405-3-1972 |
精密加工用正齒輪傳動裝置.圖樣上的數據.計算示例 |
(Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation) |
| DIN 58405-4-1972 |
精密加工用正齒輪傳動裝置.圖表 |
(Spur Gear Drives for Fine Mechanics; Tables) |
| DIN 58411-1987 |
精密加工裝置正齒輪用滾刀.模數0.1至1mm |
(Hobs for cylindrical fine pitch gears with modul 0,1 up to 1 mm) |
| DIN 58412-1987 |
精密機械齒輪刀具的基準齒形.根據德國工業標準ＤＩＮ５８４００和ＤＩＮ８６７的漸開線嚙合 |
(Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867) |
| DIN 58413-1987 |
精密加工裝置滾刀的公差 |
(Tolerances for gear hobs for fine mechanics) |
| DIN 58420-1981 |
檢驗精密機械上圓柱齒輪用的標準齒輪.齒輪毛坯及嚙合 |
(Master gears for checking of spur gears for fine mechanics; gear blanks and gearing) |
| DIN 58425-1-1980 |
精密機械的齒輪擺線嚙合.概要.符號.名稱 |
(Gears with round flanks for fine mechanics; survey, symbols, terms) |
| DIN 58425-2-1980 |
精密機械的齒輪擺線嚙合.齒形 |
(Gears with round flanks for fine mechanics; gear profile) |
| DIN 58425-3-1980 |
精密機械的齒輪擺線嚙合.輪和傳動裝置的計算與設計 |
(Gears with round flanks for fine mechanics; calculation and design of wheel and pignon) |
| DIN 58425-4-1980 |
精密機械的齒輪擺線嚙合.齒輪和傳動的公差和允許偏差 |
(Gears with round flanks for fine mechanics; tolerances and permissible devations for wheel and pignon) |
| DIN 58425-5-1980 |
精密機械的齒輪擺線嚙合.齒輪刀具的齒廓 |
(Gears with round flanks for fine mechanics; gear tool profile) |
| DIN 58425-6-1980 |
精密機械的齒輪擺線嚙合.圖樣說明 |
(Gears with round flanks for fine mechanics; indication on drawings) |
| DIN 58425-7-1980 |
精密機械的齒輪擺線嚙合.圖表 |
(Gears with round flanks for fine mechanics; tables, diagrams) |
| DIN 58450-1972 |
半圓頭帶槽沉頭螺釘.刻度螺釘 |
(Slotted flat mushroom head screw; scale-screw) |
| DIN 58460-1978 |
精密機械用螺柱 |
(Studs for fine mechanics) |
| DIN 58461-1978 |
精密機械用帶頸柱螺柱 |
(Studs with rim for fine mechanics) |
| DIN 58462-1978 |
精密機械用帶槽螺柱 |
(Studs with groove for fine mechanics) |
| DIN 58463-1978 |
精密機械用帶頸和槽的螺柱 |
(Studs with rim and groove for fine mechanics) |
| DIN 58464-1978 |
精密機械用有頭螺柱 |
(Studs with head for fine mechanics) |
| DIN 58466-1978 |
精密機械零件的標準尺寸表 |
(Table of standard dimensions for parts used in fine mechanics) |
| DIN 58467-1977 |
精密機械用帶肩襯套 |
(Bushes for fine mechanics with plain shoulder) |
| DIN 58469-1978 |
精密機械用帶螺紋柱螺栓 |
(Studs with thread for fine mechanics) |
| DIN 58470-1978 |
精密機械用帶六角頭和螺紋的柱螺栓 |
(Studs with hexagon and thread for fine mechanics) |
| DIN 58471-1978 |
精密機械用帶六角頭螺紋和槽的柱螺栓 |
(Studs with hexagon, thread and groove for fine mechanics) |
| DIN 58472-1978 |
精密機械用帶頭和螺紋的柱螺栓 |
(Studs with head and thread for fine mechanics) |
| DIN 58500-1974 |
繪圖儀器名稱.概念 |
(Nomenclature of drawing instruments) |
| DIN 58502-1990 |
繪圖儀器.要求.檢驗 |
(Drawing instruments; requirements, testing) |
| DIN 58506-1994 |
精密繪圖儀的分線規 |
(Dividers for precision drawing instruments (P)) |
| DIN 58508-1994 |
精密繪圖儀的彈簧弓式插腳分規 |
(Spring-bow divider for precision drawing instruments (P)) |
| DIN 58509-1994 |
精密繪圖儀的圓心固定圓規 |
(Fixed centre spring bow with interchangeable points for precision drawing instruments (P)) |
| DIN 58510-1994 |
精密繪圖儀的鉛筆插頭 |
(Pencil points for precision drawing instruments (P)) |
| DIN 58511-1994 |
精密繪圖儀的鋼筆插頭 |
(Pen points for precision drawing instruments (P)) |
| DIN 58512-1994 |
精密繪圖儀的分規插頭 |
(Divider points for precision drawing instruments (P)) |
| DIN 58513-1994 |
精密繪圖儀的延長桿 |
(Lengthening bar for precision drawing instruments (P)) |
| DIN 58515-1994 |
繪圖儀器的畫針 |
(Needles for drawing instruments) |
| DIN 58516-1990 |
繪圖儀器用定針 |
(Pivot needles for fixed center spring bow) |
| DIN 58518-1994 |
精密繪圖儀的鴨嘴筆 |
(Swivel nib pens for precision drawing instruments (P)) |
| DIN 58519-1994 |
精密繪圖儀的瑞典型鴨嘴筆 |
(Border pens for precision drawing instruments (P)) |
| DIN 58520-1-1994 |
繪圖儀器用的螺釘.T型螺栓 |
(Screws for drawing instruments; part 1: T-bolts) |
| DIN 58520-2-1996 |
繪圖儀用螺釘.第2部分:半沉頭螺釘 |
(Bolts for drawing instruments - Part 2: Deep flat countersunk bolt) |
| DIN 58521-1994 |
繪圖儀器用滾花螺母 |
(Knurled nuts for drawing instruments) |
| DIN 58522-1995 |
繪圖儀用石墨碳素筆 |
(Leads for drawing instruments) |
| DIN 58530-1995 |
繪圖儀器用調整螺釘 |
(Adjusting screws for drawing instruments) |
| DIN 58531-1995 |
繪圖儀器用夾頭螺桿 |
(Clamping screws for drawing instruments) |
| DIN 58532-1995 |
繪圖儀.大圓規用接長鑲配腳 |
(Drawing instruments - Lengthening bar for big bow combination with interchangeable parts) |
| DIN 58537-1972 |
繪圖儀器.比例規 |
(Drawing instruments; proportional divider) |
| DIN 58538-1982 |
繪圖儀器大分度規及可拆裝大分度規 |
(Drawing instruments; big bow pencil and big bow combination with interchangeable parts) |
| DIN 58540-1996 |
學生用繪圖儀的插入式圓規 |
(Compass with interchangeable points for standard drawing instruments) |
| DIN 58541-1996 |
學生用繪圖儀的分規 |
(Dividers for school drawing standard drawing instruments) |
| DIN 58542-1996 |
學生用繪圖儀的可逆分度規 |
(Reversible spring bow for standard drawing instruments) |
| DIN 58543-1987 |
學生用繪圖儀的分度規 |
(Spring bow divider for school drawing instruments) |
| DIN 58544-1996 |
學生用繪圖儀的定心彈簧圓規 |
(Drop bow for standard drawing instruments) |
| DIN 58545-1996 |
標準繪圖儀上鉛筆芯或針用插接件 |
(Pencil points or divider points for standard drawing instruments (S)) |
| DIN 58546-1996 |
學生繪圖儀的鴨嘴筆插腳 |
(Pen points for standard drawing instruments) |
| DIN 58548-1996 |
學生繪圖儀的延長桿 |
(Lengthening bar for standard drawing instruments) |
| DIN 58551-1975 |
學生繪圖儀的中傳動裝置 |
(Spring bow centre-wheel for drawing instruments) |
| DIN 58552-1975 |
繪圖儀螺紋套 |
(Threaded bushings for drawing instruments) |
| DIN 58553-1996 |
繪圖儀用尖針 |
(Needle holders for drawing instruments) |
| DIN 58556-1987 |
繪圖儀的快速調整圓規和部件和快速調整圓規 |
(Quick setting bow pencil and quick setting bow combination with interchangeable parts) |
| DIN 58600-2002 |
呼吸保護器.德國消防隊用高壓壓縮空氣呼吸器的自動呼吸機與呼吸連接的插塞連接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
| DIN 58600-2003 |
呼吸保護器.德國消防隊用自調需氧量氧氣調節閥與獨立開路壓縮空氣呼吸器面罩之間的插塞連接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
| DIN 58639-1998 |
自救用呼吸防護器.自救用帶面罩和氧氣的隔離裝置.要求,檢驗,標識 |
(Respiratory protective devices for self-rescue - Self-contained closed-circuit compressed oxygen breathing apparatus incorporating a hood - Requirements, testing, marking) |
| DIN 58647-7-1997 |
自救式呼吸防護器.第7部分:自救式過濾設備.要求,試驗,標志 |
(Respiratory protective devices for self-rescue - Part 7: Filtering devices for self-rescue; requirements, testing, marking) |
| DIN 58648-2-1997 |
呼吸防護器.帶呼吸保護服的壓縮空氣軟管器具.第2部分:安全技術要求.檢驗.標記 |
(Respiratory protective devices - Compressed air line breathing apparatus incorporating a suit - Part 2: Requirements, testing, marking) |
| DIN 58651-2-1997 |
呼吸保護器.用壓縮氧氣的再生呼吸裝置.第2部分:適度工作用短時壓縮氧氣防護器.要求.檢驗.標記 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus, compressed oxygen type - Part 2: Short duration-compressed oxygen type for moderate work rates; requirements, testing, marking) |
| DIN 58652-1-1997 |
呼吸保護器.用壓縮氧氣的再生呼吸裝置.第1部分:適度工作用短時化學氧氣(KO2)防護器.要求,檢驗,標記 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 1: Short duration-chemical oxygen (KO) generating type for moderate work rates; requirements, testing, marking) |
| DIN 58652-2-1997 |
呼吸保護器.用壓縮氧氣的再生呼吸裝置.第2部分:工作和救生用化學氧氣(KO2)防護器.要求,檢驗,標記 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 2: Chemical oxygen (KO) generating type for work and rescue; requirements, testing, marking) |
| DIN 58652-3-1997 |
呼吸保護器.用壓縮氧氣的再生呼吸裝置.第2部分:適度工作用短時化學氧氣(HaC10.3)防護器.要求,檢驗,標記 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 3: Short duration, chemical oxygen (NaClO) generating type for moderate work rates; requirements, testing, marking) |
| DIN 58652-4-1997 |
呼吸保護器.用壓縮氧氣的再生呼吸裝置.第2部分:工作和救生用化學氧氣(HaC10.3)防護器.要求,檢驗,標記 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 4: Chemical oxygen (NaClO) generating type for work and rescue; requirements, testing, marking) |
| DIN 58653-1960 |
氣象儀器.最小溫度計 |
(Meteorological devices - Minimum thermometer) |
| DIN 58654-1960 |
氣象儀器.最大溫度計 |
(Meteorological devices - Maximum thermometer) |
| DIN 58655-1960 |
氣象儀器.20至310mm的地表溫度計 |
(Meteorological devices - Ground thermometer 20 up to 310 mm) |
| DIN 58660-1966 |
氣象儀器.干濕球溫度計用370型溫度計 |
(Meteorological instruments - Thermometer 370 for psychrometer) |
| DIN 58661-1966 |
氣象儀器.干濕球溫度計用280型溫度計 |
(Meteorological instruments - Thermometer 280 for psychrometer) |
| DIN 58664-1968 |
氣象儀器.地下溫度計 |
(Meteorological instruments - Earth thermometers) |
| DIN 58681-1 Bb.1-1981 |
首飾標簽.標簽數據組示例 |
(Label for jewellery; example for label-datas) |
| DIN 58681-1-1981 |
首飾的標簽.成套首飾的標簽 |
(Label for jewellery; label for jewellery of multiple production) |
| DIN 58682-1989 |
手飾的鍍金.概念.標記 |
(Gold coatings for jewellery; definition, marking) |
| DIN 58700-1-1978 |
ISO配合.精密儀器的公差范圍選擇.公差范圍.公稱尺寸 |
(ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations) |
| DIN 58700-2-1978 |
ISO配合.精密儀器的公差范圍選擇.推薦配合 |
(ISO-fits; selection of tolerance zones for fine-mechanics, recommended fits) |
| DIN 58721-1984 |
光學加工.光學機床和光學設備.分類 |
(Production in optical engineering; optical machines and production devices; classification) |
| DIN 58722-1-2000 |
光學加工.光學加工的定義.第1部分:工藝 |
(Production in optical engineering - Definitions related to production in optical engineering - Part 1: Processes) |
| DIN 58722-2-2001 |
光學加工.與光學加工有關的術語.第2部分:設備 |
(Production in optical engineering - Terms relating to production in optical engineering - Part 2: Equipment) |
| DIN 58723-1985 |
光學加工.金剛石磨具 |
(Production in optic of engineering; diamond impregnated tools for facetts) |
| DIN 58724-2000 |
光學加工.球徑計.球徑計環 |
(Production in optical engineering - Spherometer - Ring for spherometer) |
| DIN 58725-1987 |
光學加工.具有附加配合部分的螺紋連接 |
(Production in optical engineering; screwed connection with fitting part) |
| DIN 58726-1977 |
光學加工.無附加配合部分的螺紋連接 |
(Production in optical engineering; screwed connections without fitting part) |
| DIN 58727-1-1973 |
光學機床用的不帶硬質金屬套的球形銷 |
(Surfacing pins for optics processing machines, without ball point cemented metal carbide) |
| DIN 58727-2-1986 |
光學加工.光學機床用帶球形的硬質合金尖的球形銷 |
(Produktion in optical engineering: surfacing pins with spherical cemented metal carbide point) |
| DIN 58727-3-1986 |
光學加工.光學機床用帶圓柱形的硬質合金尖的球形銷 |
(Production in optical engineering; surfacing pins with cylindrical cemented carbide point) |
| DIN 58729-1977 |
光學加工.球形推力軸承 |
(Production in optical engineering; ball seats) |
| DIN 58735-1998 |
光學加工.儲料盤 |
(Production in optical engineering - Magazin-disks) |
| DIN 58736-1-1997 |
光學加工.定心罩.第1部分:帶連接螺紋 |
(Production in optical engineering - Centering bells - Part 1: With fitting thread) |
| DIN 58736-2-2001 |
光學加工.定心罩.第2部分:內部連接用柱形配件尺寸30mm和46mm的定心罩 |
(Production in optical engineering - Centering bells - Teil 2: With cylindrical fitting dimension 30 mm and 46 mm for inner connection) |
| DIN 58736-3-2001 |
光學加工.定心罩.第3部分:外連接用的12mm和25mm的帶園柱形配件尺寸 |
(Production in optical engineering - Centering bells - Part 3: With cylindrical fitting dimension 12 mm and 25 mm for outer connection) |
| DIN 58737-1-1997 |
光學加工.定心主軸.第1部分:帶連接螺紋的定心主軸.不適于新結構 |
(Production in optical engineering - Spindles - Part 1: Spindles with fitting thread; inactive for new design) |
| DIN 58737-2-2001 |
光學加工.定心主軸.第2部分:帶園柱形夾的定心主軸 |
(Production in optical engineering - Spindles - Part 2: Spindles with clamping cylinder) |
| DIN 58739-1-2002 |
光學加工.光學用夾具.第1部分:真空夾頭 |
(Production in optical engineering - Workpiece receptions for optics - Part 1: Vacuum chucks) |
| DIN 58739-2-2002 |
光學加工.光學用夾具.第2部分:帶隔膜的夾頭 |
(Production in optical engineering - Workpiece receptions for optics - Part 2: Chucks with membranes) |
| DIN 58739-3-2002 |
光學加工.光學用夾具.第3部分:單鏡頭用夾頭 |
(Production in optical engineering - Workpiece receptions for optics - Part 3: Collets for single lenses) |
| DIN 58739-4-2002 |
光學加工.光學用夾具.第4部分:支承體的夾頭 |
(Production in optical engineering - Workpiece receptions for optics - Part 4: Collets for spot blocks) |
| DIN 58739-5-2004 |
光學加工.光學用工件夾具.第5部分:眼鏡片生產用塊材夾頭 |
|
| DIN 58740-1-1997 |
光學加工.砂輪軸.第1部分:帶錐度的砂輪軸 |
(Production in optical engineering - Machine tool spindles - Part 1: Machine tool spindles with steep taper) |
| DIN 58740-2-2004 |
光學加工.機床軸.第2部分:帶夾緊缸的機床軸 |
(Production in optical engineering - Machine tool spindles - Part 2: Machine tool spindles with clamping cylinder) |
| DIN 58740-2-2004 |
光學加工.機床軸.第2部分:帶夾緊缸的機床軸 |
|
| DIN 58740-3-2004 |
光學加工.機床軸.第3部分:中空錐柄連接 |
|
| DIN 58741 Bb.1-2002 |
光學加工.鑲金剛石的碗形砂輪.概述 |
(Production in optical engineering - Diamond impregnated cup wheels - Survey) |
| DIN 58741-1-1996 |
光學加工.鑲金剛石的碗形砂輪.第1部分:帶園錐體 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 1: with steep cone) |
| DIN 58741-2-1995 |
光學加工.鑲金剛石的碗形砂輪.第2部分:帶12mm的連接圓柱 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder 12 mm) |
| DIN 58741-2-2004 |
光學加工.鑲金剛石的杯形砂輪.第2部分:帶安裝缸砂輪 |
|
| DIN 58741-3-1995 |
光學加工.鑲金剛石的碗形砂輪.第3部分:帶25mm的連接圓柱 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 3: With mounting cylinder 25 mm) |
| DIN 58741-4-2004 |
光學加工.鑲金剛石的杯形砂輪.第4部分:組合工具 |
|
| DIN 58741-5-2004 |
光學加工.鑲金剛石的杯形砂輪.第5部分:電鍍的 |
|
| DIN 58742-1998 |
光學加工.鑲金剛石的定心砂輪和成型砂輪 |
(Production in optical engineering - Diamond impregnated centering discs and discs with special profiles) |
| DIN 58743-1976 |
光學加工.鑲金剛石的切割鋸片 |
(Production in optical engineering; diamond impregnated discs) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com