標準號 |
中文名稱 |
英文名稱 |
| DIN IEC 60098-1989 |
圓盤唱片和重放設備 |
Analogue audio disk records and reproducing equipment; identical with IEC 60098:1987 |
| DIN IEC 60107-3-2000 |
電視廣播接收機的推薦測量方法.第3部分:副載波系統多聲道電視接收機的電測量 |
Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems (IEC 60107-3:1988 + A1:1999) |
| DIN IEC 60107-4-2000 |
電視廣播接收機的推薦測量方法.第4部分:雙載波調頻裝置多聲道電視接收機的電測量 |
Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system (IEC 60107-4:1988 + A1:1999) |
| DIN IEC 60107-6-1991 |
電視廣播接收機的推薦測量方法.第6部分:不同廣播信號標準條件下的測量 |
Recommended methods of measurement on receivers for television broadcast transmissions; part 6: measurement under conditions different from broadcast signal standards; identical with IEC 60107-6:1989; german version HD 567.6 S1:1990 |
| DIN IEC 60115-2-1-1987 |
電子設備用固定電阻器.第2部分:空白詳細規范.第1節:低功率非線繞固定電阻器正級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed low-power non-wirewound resistors; assessment level E; identical with IEC 60115-2-1, edition 1982 |
| DIN IEC 60115-2-1987 |
電子設備用固定電阻器.第2部分:分規范.第1節:低功率非線繞固定電阻器 |
Fixed resistors for use in electronic equipment; sectional specification: fixed low-power non-wirewound resistors; identical with IEC 60115-2, edition 1982 |
| DIN IEC 60115-2-2-1993 |
電子設備用固定電阻器.第2部分第2節:空白詳細規范.低負載非線繞固定電阻器.F級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed low-power non-wirewound resistors; assessment level F; identical with IEC 60115-2-2:1992 |
| DIN IEC 60115-4-1-1987 |
電子設備用固定電阻器.第4部分:空白詳細規范.第1節:功率型固定電阻器正級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed power resistors; assessment level E; identical with IEC 60115-4-1, edition 1983 |
| DIN IEC 60115-4-1987 |
電子設備用固定電阻器.第4部分:分規范.第1節:功率型固定電阻器 |
Fixed resistors for use in electronic equipment; sectional specification: fixed power resistors; identical with IEC 60115-4, edition 1982 |
| DIN IEC 60115-4-2-1993 |
電子設備用固定電阻器.第4部分:空白詳細規范.離負載固定電阻器.F級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed power resistors; assessment level F; identical with IEC 60115-4-2:1992 |
| DIN IEC 60115-5-1-1987 |
電子設備用固定電阻器.第5部分:空白詳細規范.第1節:精密固定電阻器 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed precision resistors; assessment level E; identical with IEC 60115-5-1, edition 1983 |
| DIN IEC 60115-5-1987 |
電子設備用固定電阻器.第5部分:空白詳細規范.第1節:精密固定電阻器正級評定 |
Fixed resistors for use in electronic equipment; sectional specification: fixed precision resistors; identical with IEC 60115-5, edition 1982 |
| DIN IEC 60115-5-2-1993 |
電子設備用固定電阻器.第5部分:空白詳細規范:精密固定電阻器.F級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed precision resistors; assessment level F; identical with IEC 60115-5-2:1992 |
| DIN IEC 60115-6-1-1986 |
電子設備用固定電阻器.第6部分:空白詳細規范.第1節:所有電阻器都是等阻值和等功耗可單獨測量的固定電阻器網絡.E級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation; assessment level E; identical with IEC 60115-6-1, edition 1983 |
| DIN IEC 60115-6-1986 |
電子設備用固定電阻器.第6部分:分規范:各電阻器可單獨測量的固定電阻器網絡 |
Fixed resistors for use in electronic equipment; sectional specification: fixed resistor networks with individually measurable resistors; identical with IEC 60115-6, edition 1983 |
| DIN IEC 60115-6-2-1986 |
電子設備用固定電阻器.第6部分:空白詳細規范.第2節:可單獨測量的不同電阻值或不同額定功耗的固定電阻器網絡.E級評定 |
Fixed resistors for use in electronic equipment; blank detail specification: fixed resistor networks with individually measurable resistors, of either different resistance values or different rated dissipations; assessment level E; identical with IEC 6011 |
| DIN IEC 60115-7-1-1989 |
電子設備用固定電阻器.第7部分:空白詳細規范.第1節:非全部電阻器均可單獨測量的固定電阻器網絡.E級評定 |
Fixed resistors for use in electronic equipment; blank detail specification; fixed resistor networks in which not all resistors are individually measurable; assessment level E; identical with IEC 60115-7-1:1984 |
| DIN IEC 60115-7-1989 |
電子設備用固定電阻器.第7部分:分規范.第1節:非全部電阻器均可單獨測量的固定電阻器網絡 |
Fixed resistor for use in electronic equipment; sectional specification; fixed resistor networks in which not all resistors are individually measurable; identical IEC 115-7:1984 |
| DIN IEC 60118-1-1985 |
助聽器.第1部分:感應拾音線圈輸入的助聽器 |
Hearing aids; hearing aids with induction pick-up coil input; identical with IEC 118-1, edition 1983 |
| DIN IEC 60118-11-1989 |
助聽器.第11部分:助聽器及有關設備上的符號和其它標記 |
Hearing aids; symbols and other markings on hearing aids and related equipment; identical with IEC 60118-11:1983 |
| DIN IEC 60118-3-1989 |
助聽器.第3部分:不完全戴在聽者身上的助聽設備 |
Hearing aids; hearing aid equipment not entirely worn on the listener; identical with IEC 60118-3:1983 |
| DIN IEC 60118-5-1992 |
助聽器.塞入式耳機的塞頭 |
Hearing aids; part 5: nipples for insert earphones (IEC 60118-5:1983); german version HD 450.5 S1:1985 |
| DIN IEC 60118-9-1987 |
助聽器.第9部分:骨振子輸出助聽器特性測量方法 |
Hearing aids; methods of measurement of characteristics of hearing aids with bone vibrator output; identical with IEC 60118-9, edition 1985 |
| DIN IEC 60120-1987 |
絕緣子串件的球與窩連接尺寸 |
Dimensions of ball and socket couplings of string insulator units; identical with IEC 60120, edition 1984 |
| DIN IEC 60122-2-1-1992 |
頻率穩定和選擇用石英振蕩器.第2部分:頻率穩定和選擇用石英振蕩器的使用導則.第1節:微處理機脈沖源用石英振蕩器 |
Quartz crystal units for frequency control and selection; part 2: guide to use of quartz crystal units for frequency control and selection; Section one: quartz crystal units for microprocessor clock supply; identical with IEC 60122-2-1:1991 |
| DIN IEC 60122-2-1993 |
穩率穩定和選擇用石英諧振器.第2部分:頻率穩定和選擇用石英諧振器的使用導則 |
Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983 |
| DIN IEC 60122-3-1993 |
頻率穩定和選擇用石英諧振器.第3部分:標準外形和引線連接 |
Quartz crystal units for frequency control and selection; part 3: standard outlines and lead connections; identical with IEC 60122-3:1977 (status as of 1991) |
| DIN IEC 60136-3-1980 |
電機電刷和刷握的尺寸.第3部分:碳刷用戶IEC技術調查表 |
Dimensions of brushes and brush-holders for electrical machinery; part 3: IEC technical questionnaire for users of carbon brushes |
| DIN IEC 60151-14-1980 |
電子管電性能的測量.第14部分:雷達和示波器陰極射線管的測量方法 |
Measurement of the electrical properties of electronic tubes; part 14: methods of measurement of radar and oscilloscope cathode-ray tubes |
| DIN IEC 60154-3-1985 |
波導法蘭盤.第3部分:扁矩形波導法蘭盤的有關規范 |
Flanges for waveguides; relevant specifications for flanges for flat rectangular waveguides; identical with IEC 60154-3, edition 1982 |
| DIN IEC 60167-1993 |
電氣絕緣材料的檢驗方法.固體絕緣材料的絕緣電阻 |
Methods of test for insulating materials for electrical purposes; insulation resistance of solid materials (IEC 60167:1964); German version HD 568 S1:1990 |
| DIN IEC 60169-7-1997 |
射頻連接器.第7部分:外導體內徑為9.5mm(0.374in),卡口鎖定,特性阻抗為50Ω的射頻同軸連接器(C型) |
Radio-frequency connectors - Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with bayonet lock; characteristic impedance 50 ohms (type C) (IEC 60169-7:1975 + A1:1993); German version HD 134.7 S2:1995 |
| DIN IEC 60212-1995 |
固體電氣絕緣材料試驗前和試驗中所用標準條件 |
Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:1971); German version HD 437 S1:1984 |
| DIN IEC 60216-2-1996 |
電絕緣材料耐熱性能的測定導則.第2部分:試驗準則選定 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Part 2: Choice of test criteria (IEC 60216-2:1990); German version HD 611.2 S1:1992 |
| DIN IEC 60235-1-1978 |
微波管電性能的測量.第1部分:術語 |
Measurement of the Electrical Properties of Microwave Tubes; Part 1: Terminologie |
| DIN IEC 60235-2-1988 |
微波管電性能的測量.第2部分:一般測量 |
Measurement of the electrical properties of microwave tubes; general measurements; identical with IEC 60235-2:1972 (status as of 1976) |
| DIN IEC 60235-3-1978 |
微波管電性能的測量.第3部分:盤封管 |
Measurement of the Electrical Properties of Microwave Tubes; Part 3: Disk Seal Tubes |
| DIN IEC 60235-4-1981 |
微波管電性能的測量.第4部分:磁控管 |
Measurement of the electrical properties of microwave tubes; part 4: magnetrons |
| DIN IEC 60235-6-1978 |
微波管電性能的測量.第6部分:大功率速調管 |
Measurement of the Electrical Properties of Microwave Tubes; Part 6: High Power Clystrons |
| DIN IEC 60244-10-1988 |
無線電發射機的測量方法.第10部分:采用插入測試信號的電視發射機和差轉機的測量方法 |
Methods of measurement for radio transmitters; methods of measurement for television transmitters and transposers employing insertion test signals; identical with IEC 60244-10, edition 1986 |
| DIN IEC 60244-11-1990 |
無線電發射機的測量方法.第11部分:無線電差轉機的測量方法 |
Methods of measurement for radio transmitters; transposers for FM sound broadcasting; identical with IEC 60244-11:1989 |
| DIN IEC 60244-12-1-1992 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.規定特性 |
Methods of measurement for radio transmitters; guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; characteristics to be specified; identical with IEC 60244-12-1:1989 |
| DIN IEC 60244-12-2-1992 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.說明卡 |
Methods of measurement for radio transmitters; guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; specification sheets; identical with IEC 60244-12-2:1989 |
| DIN IEC 60244-2-1982 |
無線電發射機的測量方法.第2部分:帶寬.帶外功率和非主振功率 |
Methods of measurement for radio transmitters; part 2: bandwidth, out-of-band power and power of non-essential oscillations |
| DIN IEC 60244-3-1982 |
無線電發射機的測量方法.第3部分:有用調制和無用調制 |
Methods of measurement for radio transmitters; part 3: wanted and unwanted modulation |
| DIN IEC 60244-4-1983 |
無線電發射機的測量方法.第4部分:無線電話和播音發射機的幅/頻特性及非線性失真 |
Methods of measurement for radio transmitters; part 4: amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting |
| DIN IEC 60244-6-1981 |
無線電發射機的測量方法.第6部分:頻率130KHz-1GHz的機箱輻射 |
Methods of measurement for radio transmitters; part 6: cabinet radiation at frequencies between 130 kHz and 1 GHz |
| DIN IEC 60244-7-1985 |
無線電發射機的測量方法.第7部分:頻率1GHz以上的機箱輻射 |
Methods of measurement for radio transmitters; part 7: cabinet radiation at frequencies above 1 GHz |
| DIN IEC 60247-1996 |
絕緣液體的相對介電常數,介質耗散因數和直流電阻率的測量 |
Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids (IEC 60247:1978) |
| DIN IEC 60248-1987 |
核電子儀表用原盤的尺寸 |
Dimensions of planchets used in nuclear electronic instruments; identical with IEC 60248, edition 1984 |
| DIN IEC 60249-3-1-1986 |
印制電路用基材.第3部分:印制電路用的特殊材料.第1號規范:制造多層印制板中用作粘結片材料的預浸材料 |
Base materials for printed circuits; special materials; specification no. 1: prepreg for use as bonding sheet material in the fabrication of multilayer printed boards; identical with IEC 60249-3-1, edition 1981 |
| DIN IEC 60249-3-3-1994 |
印制電路用基材.第3部分:印制電路用的特殊材料.第3號規范:制造印制電路板用耐用聚合覆蓋材料(釬焊覆蓋) |
Base materials for printed circuits; part 3: special materials; specification No. 3: permanent polymer coating materials (solder-resist) for use in the fabrication of printed boards; identical with IEC 60249-3-3:1991 |
| DIN IEC 60255-22-1-1991 |
繼電器.第22部分:測試?yán)^電器和保護設備的電干擾試驗.第1節:1MHz短脈沖群干擾試驗 |
Electrical relays; electrical disturbance tests for measuring relays and protection equipment; 1 MHz burst disturbance tests; identical with IEC 60255-22-1:1988 |
| DIN IEC 60261-1991 |
加壓波導管及其組件的密封試驗 |
Sealing test for pressurized waveguide; tubing and assemblies; identical with IEC 60261:1989; german version HD 138 S2:1990 |
| DIN IEC 60263-1999 |
繪制頻率特性曲線和極座標圖用的標度和尺寸比例 |
Sclaes and sizes for plotting frequency characteristics and polar diagrams (IEC 60263:1982) |
| DIN IEC 60268-1-1988 |
音響系統設備.第1部分:總則 |
Sound system equipment; general; identical with IEC 60268-1:1985 (status as of 1988) |
| DIN IEC 60268-10-1994 |
音響系統設備.第10部分:峰值節日電平計 |
Sound system equipment - Part 10: Peak programme level meters (IEC 60268-10:1991); German version HD 483.10 S1 |
| DIN IEC 60268-11-1995 |
音響系統設備.第11部分:音響系統部件互連用圓形連接器的應用 |
Sound system equipment - Part 11: Application of connectors for the interconnection of sound system components (IEC 60268-11:1987 + A1:1989 + A2:1991); German version HD 483.11 S3:1993 |
| DIN IEC 60268-17-1992 |
電聲系統設備.標準音量指示器 |
Sound system equipment; standard volume indicators; identical with IEC 60268-17:1990 |
| DIN IEC 60268-2-1994 |
音響系統設備.第2部分:一般術語和計算方法的解釋 |
Sound system equipment - Part 2: Explanation of general terms and calculation methods (IEC 60268-2:1987 + A1:1991); German version HD 483.2 S2:1993 |
| DIN IEC 60273-1993 |
1000V以上額定電壓系統用戶內戶外支柱絕緣子的特性 |
Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V (IEC 60273:1990); German version HD 578 S1:1992 |
| DIN IEC 60294-1986 |
具有兩個軸向引出端的圓柱形件尺寸的測量 |
Measurement of the dimensions of a cylindrical component having two axial terminations; identical with IEC 60294, edition 1969 |
| DIN IEC 60297-3-1994 |
482.6mm(19.in)系列機械結構件的尺寸.第3部分:分機架及相關插件 |
Dimensions of mechanical structures of the 482,6 mm (19in) series - Part 3: Subracks and associated plug-in units (IEC 60297-3:1984 + A1:1992); German version HD 493.3 S2:1993 |
| DIN IEC 60300-3-1-1994 |
可靠性管理.應用指南.可靠性分析技術 |
Dependability management; application guide; analysis techniques for dependability; identical with IEC 60300-3-1:1991 |
| DIN IEC 60300-3-10-2004 |
可信性管理.第3-10部分:應用指南.可維修性 |
|
| DIN IEC 60300-3-11-2002 |
可靠性管理.第3-11部分:應用指南.可靠性中心維護 |
Dependability management - Part 3-11: Application guide; Reliability centred maintenance (IEC 60300-3-11:1999) |
| DIN IEC 60300-3-3-1999 |
可靠性管理.第3部分:應用指南.第3節:壽命周期成本觀察 |
Dependability management - Part 3: Application guide - Section 3: Life cycle costing (IEC 60300-3-3:1996) |
| DIN IEC 60300-3-4-1999 |
可靠性管理.第3部分:應用指南.第4節:可靠性要求規定的指南 |
Dependability management - Part 3: Application guide; section 4: Guide to the specification of dependability requirements (IEC 60300-3-4:1996) |
| DIN IEC 60301-1985 |
電容器和電阻器引出線端的優選直徑 |
Preferred diameters of wire terminations of capacitors and resistors; identical with IEC 60301, edition 1971 |
| DIN IEC 60304-1987 |
低頻電纜和電線用絕緣的標準顏色 |
Standard colours for insulation for low-frequency cables and wires; identical with IEC 60304, edition 1982 |
| DIN IEC 60313-2002 |
核實驗儀器用同軸連接器 |
Coaxial connectors used in nuclear laboratory instrumentation (IEC 60313:2002) |
| DIN IEC 60315-1-1991 |
各種發射類別的無線電接收機的測量方法.第1部分:測量(包括聲頻測量)的一般條件和方法 |
Methods of measurement on radio receivers for various classes of emission; part 1: general considerations and methods of measurement; including audiofrequency measurements (identical with IEC 60315-1 1988); german version HD 560.1 S1:1990 |
| DIN IEC 60315-6-1999 |
各種發射類別的無線電接收機的測量方法.第6部分:全波信息接收機 |
Methods of measurement on radio receivers for various classes of emission - Part 6: General purpose communication receivers (IEC 60315-6:1991 + Corr.:1997) |
| DIN IEC 60317-0-1-1994 |
特種繞組線交貨技術條件.第0部分:一般要求.第1節:漆包圓銅線 |
Specifications for particular types of winding wires; part 0: general requirements; section 1: enamelled round copper wire (IEC 317-0-1:1990 + A1:1992); German version HD 555.0.1 S2:1993 |
| DIN IEC 60317-0-2-1994 |
特種繞組線交貨技術條件.第0部分:一般要求.第2節:漆包矩形銅線 |
Specifications for particular types of winding wires; part 0: general requirements; section 2: enamelled rectangular copper wire (IEC 317-0-2:1990 + A1:1992); German version HD 555.0.2 S2:1993 |
| DIN IEC 60317-0-4-1994 |
特種繞組線交貨技術條件.第0部分:一般要求.第4節:玻璃纖維繞組裸銅線或漆包扁銅線 |
Specifications for particular types of winding wires; part 0: general requirements; section 4: glass-fibre wound bare or enamelled rectangular copper wire (IEC 317-0-4:1990 + A1:1992); German version HD 555.0.4 S2:1993 |
| DIN IEC 60319-2003 |
電子器件可靠性數據的表示和規范 |
Presentation and specification of reliability data for electronic components (IEC 60319:1999) |
| DIN IEC 60326-10-1993 |
印制電路板.第10部分:帶貫穿連接的雙面有走線圖的剛性彎曲印制電路板的要求 |
Printed boards; part 10: specification for flex-rigid double-sided printed boards with through connections; identical with IEC 60326-10:1991 |
| DIN IEC 60326-11-1993 |
印制電路板.第11部分:帶貫穿連接的剛性彎曲多層印制電路板的要求 |
Printed boards; part 11: specification for flex-rigid multilayer printed boards with through connections; identical with IEC 60326-11:1991 |
| DIN IEC 60326-2-1992 |
印制板.第2部分:檢驗方法 |
Printed boards; part 2: test methods; identical with IEC 60326-2:1990 |
| DIN IEC 60326-2/A1-1993 |
印制電路板.第2部分:檢驗方法 |
Printed boards; part 2: test methods; identical with IEC 60326-2 A1:1992 |
| DIN IEC 60326-3-1993 |
印制電路板.第3部分:印制電路板的設計和使用 |
Printed boards; part 3: design and use of printed boards; identical with IEC 60326-3:1991 |
| DIN IEC 60326-4-1993 |
印制電路板.第4部分:單面或雙面無金屬孔帶印制圖的印制電路板的要求 |
Printed boards; part 4: specification for single and double sided rigid printed boards with plain holes; identical with IEC 60326-4:1980 (status as of 1989) |
| DIN IEC 60326-5-1993 |
印制電路板.第5部分:單面或雙面有金屬機孔帶印制圖的剛性印制電路板的要求 |
Printed boards; part 5: specification for single and double sided printed boards with plated-through holes; identical with IEC 60326-5:1980 (status as of 1989) |
| DIN IEC 60326-7-1985 |
印制板.第7部分:無貫穿連接的單面或雙面撓性印制板的要求 |
Printed boards; part 7: specification for single and double sided flexible printed boards without through connections |
| DIN IEC 60326-7/A1-1994 |
印制板.第7部分:對無連續連接帶走線圖 |
Printed boards; part 7: specification for single and double sided flexible printed boards without through connections (IEC 60326-7 A1:1989) |
| DIN IEC 60326-8-1985 |
印制板.第8部分:有貫穿連接的單面或雙面撓性印制板的要求 |
Printed boards; specification for single and double sided flexible printed boards with through connections; identical with IEC 60326-8, edition 1981 |
| DIN IEC 60326-8/A1-1994 |
印制板.對無連續連接單面或雙面帶走線圖柔性印制板的要求 |
Printed boards; part 8: specification for single and double sided flexible printed boards with through connections (IEC 60326-8 A1:1989) |
| DIN IEC 60326-9-1993 |
印制電路板.第9部分:帶貫穿連接的柔性多層印制電路板的要求 |
Printed boards; part 9: specification for flexible multilayer printed boards with through connections; identical with IEC 60326-9:1991 |
| DIN IEC 60333-1995 |
核儀表.半導體帶電粒子探測器試驗程序 |
Nuclear instrumentation - Semiconductor charged-particle detectors - Test procedures (IEC 60333:1993) |
| DIN IEC 60345-1996 |
絕緣材料在高溫下電阻和電阻率的試驗方法 |
Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971); German version HD 438 S1:1984 |
| DIN IEC 60351-1-1981 |
陰極射線示波器性能的表示法.第1部分:總則 |
Expression of the properties of cathode-ray oscilloscopes; part 1: general |
| DIN IEC 60351-2-1981 |
陰極射線示波器性能的表示法.第2部分:存儲示波器 |
Expression of the properties of cathode-ray oscilloscopes |
| DIN IEC 60368-2-1-1993 |
壓電濾波器.第2部分:壓電濾波器使用指南.第1節:石英晶體濾波器 |
Piezoelectric filters; part 2: guide to the use of piezoelectric filters; section 1: quartz crystal filters; identical with IEC 60368-2-1:1988 |
| DIN IEC 60370-1994 |
絕緣漆耐熱性試驗規程.電氣強度法 |
Test procedure for thermal endurance of insulating varnishes - Electric strength method (IEC 60370:1971); German version HD 570 S1:1990 |
| DIN IEC 60373-1992 |
骨傳振動器測量用機械耦合器 |
Mechanical coupler for measurements on bone vibrators (IEC 60373:1990); german version HD 590 S1:1991 |
| DIN IEC 60381-1-1985 |
過程控制系統用模擬信號.第1部分:直流電流信號 |
Analogue signals for process control systems; direct current signals; identical with IEC 60381-1, edition 1982 |
| DIN IEC 60381-2-1980 |
過程控制系統用模擬信號.第2部分:直流電壓信號 |
Analogue signals for process control systems; part 2: direct voltage signals |
| DIN IEC 60384-10-1-1993 |
電子設備用固定電容器.第10部分:空白分規范:表面安裝的多層瓷片固定電容器.E級質量評定 |
Fixed capacitors for use in electronic equipment; part 10: blank detail specification: fixed multilayer ceramic chip capacitors; assessment level E; identical with IEC 60384-10-1:1989 |
| DIN IEC 60384-10-1993 |
電子設備用固定電容器.第10部分:空白分規范:表面安裝的多層瓷片固定電容器 |
Fixed capacitors for use in electronic equipment; part 10: sectional specification: fixed multilayer ceramic chip capacitors; identical with IEC 60384-10:1989 |
| DIN IEC 60384-11-1-1991 |
電子設備用固定電容器.第11部分:分規范:固定聚乙烯-對苯二酸酯薄膜介質金屬箔直流電容器.第1節:空白詳細規范:固定聚乙烯-對苯二酸酯薄膜介質金屬箔直流電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 11: blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors; assessment level E; identical with IEC 60384-11-1:1988 |
| DIN IEC 60384-11-1991 |
電子設備用固定電容器.第11部分:分規范:固定聚乙烯-對苯二酸酯薄膜介質金屬箔直流電容器 |
Fixed capacitors for use in electronic equipment; part 11: sectional specification: fixed polyethelene-terephtalate film dieletric metal foil d.c. capacitors; identical with IEC 60384-11:19988 |
| DIN IEC 60384-12-1-1991 |
電子設備用固定電容器.第12部分:分規范:固定聚碳酸酯薄膜介質金屬箔直流電容器.第1節:空白詳細規范:金屬箔式聚碳酸酯薄膜介質直流固定電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 12: blank detail specification: fixed polycarbonate film dielectric metal foil d.c. capacitors; assessment level E; identical with IEC 60384-12-1:1988 |
| DIN IEC 60384-12-1991 |
電子設備用固定電容器.第12部分:分規范:固定聚碳酸酯薄膜介質金屬箔直流電容器 |
Fixed capacitors for use in electronic equipment; part 12: sectional specification: fixed polycarbonate film dielectric metal foil d.c. capacitors; identical with IEC 60384-12:1988 |
| DIN IEC 60384-13-1-1992 |
電子儀器用固定電容器.第13部分:空白詳細規范:固定聚丙烯薄膜絕緣金屬箔直流電容器 評定等級E |
Fixed capacitors for use in electronic equipment; part 13: blank detail specification: fixed polypropylene film dieletric metal foil d.c. capacitors; assessment level E; identical with IEC 60384-13-1:1991 |
| DIN IEC 60384-13-1992 |
電子儀器用固定電容器.第7部分:分規范:固定聚丙烯薄膜絕緣金屬箔直流電容器 |
Fixed capacitors for use in electronic equipment; part 13: sectional specification: fixed polypropylene film dieletric metal foil d.c. capacitors; identical with IEC 60384-13:1991 |
| DIN IEC 60384-15-1-1991 |
電子設備用固定電容器.第15部分:分規范:固體或非固體電解質固定鉭電容器.第1節:空白詳細規范:非固體電解質和箔電極的固定鉭電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 15: blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode; assessment level E; identical with IEC 60384-15-1:1984 |
| DIN IEC 60384-15-1991 |
電子設備用固定電容器.第15部分:分規范:固體或非固體電解質固定鉭電容器 |
Fixed capacitors for use in electronic equipment; part 15: sectional specification: fixed tantalum capacitors with non-solid and solid electrolyte; identical with IEC 60384-15:1982 (status as of 1987) |
| DIN IEC 60384-15-2-1991 |
電子設備用固定電容器.第15部分:分規范:固體或非固體電解質固定鉭電容器.第2節:空白詳細規范:非固體電解質和多孔陽極的固定鉭電容器.E級評定.等同于IEC 60384-15-2:1984 |
Fixed capacitors for use in electrical equipment; part 15: blanc detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode; assessement level E; identical with IEC 60384-15-2:1984 |
| DIN IEC 60384-15-3-1991 |
電子設備用固定電容器.第15部分:分規范:固體或非固體電解質固定鉭電容器.第3節:空白詳細規范:固體電解質和多孔陽極固定鉭電容器.E級評定.等同于IEC 60384-15-3:1984 |
Fixed capacitors for use in electronic equipment; part 15: blanc detail specification: fixed tantalum capacitors with solid electrolyte and porous anode; assessment level E; identical with IEC 60384-15-3:1984 |
| DIN IEC 60384-16-1-1991 |
電子設備用固定電容器.第16部分:分規范:金屬化聚丙烯薄膜介質直流固定電容器.第1節:空白詳細規范:固定或金屬化聚丙烯薄膜介質直流電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 16: blank detail specification: fixed metallized polypropylene film dielectric direct current capacitors; assessment level E; identical with IEC 60384-16-1:1982 (status as of 1987) |
| DIN IEC 60384-16-1991 |
電子設備用固定電容器.第16部分: 分規范:金屬化聚丙烯薄膜介質直流固定電容器.等同于60384-16:1982(與1987年情況一樣) |
Fixed capacitors for use in electronic equipment; part 16: sectional specification: fixed metallized polypropylene film dielectric direct current capacitors; identical with IEC 60384-16:1982 (status as of 1987) |
| DIN IEC 60384-17-1-1991 |
電子設備用固定電容器.第17部分:分規范:固定金屬化聚丙烯薄膜介質交流和脈沖電容器.第1節:空白詳細規范:固定金屬化聚丙烯薄膜介質交流和脈沖電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 17: blank detail specification: fixed metallized polypropylene film dielectric a.c. and pulse capacitors; assessment level E; identical with IEC 60384-17-1:1987 |
| DIN IEC 60384-17-1991 |
電子設備用固定電容器.第17部分:分規范:固定金屬化聚丙烯薄膜介質交流和脈沖電容器 |
Fixed capacitors for use in electronic equipment; part 17: sectional specification: fixed metallized polypropylene film dielectric a.c. and pulse capacitors; identical with IEC 60384-17:1987 |
| DIN IEC 60384-18-1-1994 |
電子設備用固定電容器.第18部分:空白詳細規范.帶固體電解質的鋁電解質的鋁電解質芯片狀電容器.評定級E |
Fixed capacitors for use in electronic equipment; part 18: blank detail specification: fixed aluminium electrolytic chip capacitors with solid electrolyte; assessment level E; identical with IEC 60384-18-1:1993 |
| DIN IEC 60384-18-1994 |
電子設備用固定電容器.第18部分:分規范:帶固體和液體電解質的鉛電解質片狀固定電容器 |
Fixed capacitors for use in electronic equipment; part 18: sectional specification: fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte; identical with IEC 60384-18:1993 |
| DIN IEC 60384-18-2-1994 |
電子設備用固定電容器.第18部分:帶液態電解質的鉛電解質片狀固定電容器.評定等級E |
Fixed capacitors for use in electronic equipment; Part 18: blank detail specification: fixed aluminium electrolytic chip capacitors with non-solid electrolyte; assessment level E; identical with IEC 60384-18-2:1993 |
| DIN IEC 60384-19-1-1994 |
電子設備用固定電容器.第19部分:空白詳細規范:覆金屬聚對苯二甲酸乙酯薄膜介質芯張式直流固定電容器.E級評定 |
Fixed capacitors for use in electronic equipment; part 19: blank detail specification: fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors; assessment level E (IEC 60384-19-1:1993) |
| DIN IEC 60384-19-1994 |
電子設備用固定電容器.第19部分:覆金屬聚對苯二甲酸乙酯薄膜介質芯張式直流固定電容器 |
Fixed capacitors for use in electronic equipment; part 19: sectional specification: fixed metallized polyethylene-terephthalat film dielectric chip d.c. capacitors (IEC 60384-19:1993) |
| DIN IEC 60384-2-1-1991 |
電子設備用固定電容器.第2部分:空白詳細規范:金屬化聚乙烯對苯二甲酸乙二酸酯薄膜介質直流固定電容器 |
Fixed capacitors for use in electronic equipment; part 2: blank detail specification: fixed metallized polyethylene-terephthalate film dielectric current capacitors; assessment level E; identical with IEC 60384-2-1:1982 (status as of 1987) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com