標準號 |
中文名稱 |
英文名稱 |
| DIN EN 140401-804-2005 |
詳細規范:固定式低功率非線繞高穩定性表面安裝電阻器.矩形.穩定性等級0.1和0.25 |
|
| DIN EN 140402-1999 |
空白詳細規范.低容許負荷,可表面安裝,導線繞制的固定電阻(SMD) |
(Blank detail specification: Fixed low power wire wound surface mounting (SMD) resistors; German version EN 140402:1998) |
| DIN EN 14041-2005 |
彈性、紡織和層壓地板覆蓋物.基本特性 |
|
| DIN EN 14042-2003 |
工作場所空氣.暴露于化學和生物制劑的大氣評定程序的應用和使用指南 |
(Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents; German version EN 14042:2003) |
| DIN EN 14045-2003 |
包裝.在規定了合成條件的實際定向試驗中包裝材料分解的評定 |
(Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions; German version EN 14045:2003) |
| DIN EN 14046-2003 |
包裝.組成條件受控的包裝材料最大需氧生物降解能力的評定.二氧化碳釋放分析的方法 |
(Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide; German version EN 14046:2003) |
| DIN EN 14047-2003 |
包裝.測定在氣化介質中包裝材料的最終氧化生物降解性.二氧化碳分析法 |
(Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002) |
| DIN EN 14048-2003 |
包裝.測定在氣化介質中包裝材料的最終氧化生物降解性.封閉式呼吸機氧量測量方法 |
(Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer; German version EN 14048:2002) |
| DIN EN 14049-2004 |
灌溉強度.計算原理和測量方法 |
(Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003) |
| DIN EN 14049-2004 |
灌溉強度.計算原理和測量方法 |
|
| DIN EN 1405-1998 |
用于制備飲用水的產品.鈉藻酸鹽 |
(Chemicals used for treatment of water intended for human consumption - Sodium alginate; German version EN 1405:1998) |
| DIN EN 14053-2003 |
包裝.瓦楞或?qū)嵭睦w維紙板制成的包裝件 |
(Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003) |
| DIN EN 14056-2003 |
實驗室家具.設計和安裝的建議 |
(Laboratory furniture - Recommendations for design and installation; German version EN 14056:2003) |
| DIN EN 14057-2003 |
鉛和鉛合金.廢料.術語和定義 |
(Lead and lead alloys - Scrap - Terms and definitions; German version EN 14057:2003) |
| DIN EN 14058-2004 |
防護服.抵抗寒冷環境用防護服 |
|
| DIN EN 14059-2003 |
裝飾油燈.安全和試驗方法 |
(Decorative oil lamps - Safety requirements and test methods; German version EN 14059:2002) |
| DIN EN 1406-1998 |
用于制備飲用水的產品.改進濃度 |
(Chemicals used for treatment of water intended for human consumption - Modified starches; German version EN 1406:1998) |
| DIN EN 14063-1-2004 |
熱絕緣材料和產品.現場成形膨脹粘土輕集料產品.第1部分:松填裝產品的安裝前規范 |
|
| DIN EN 14065-2003 |
紡織品.洗滌過的紡織品.生物污染控制系統 |
(Textiles - Laundry processed textiles - Biocontamination control system; German version EN 14065:2002) |
| DIN EN 14066-2003 |
天然石料試驗方法.用熱沖擊法測定耐老化性 |
(Natural stone test methods - Determination of resistance to ageing by thermal shock; German version EN 14066:2003) |
| DIN EN 14067-1-2003 |
鐵路設施.空氣動力學.第1部分:符號和單位 |
(Railway applications - Aerodynamics - Part 1: Symbols and units; German version EN 14067-1:2003) |
| DIN EN 14067-2-2003 |
鐵路設施.空氣動力學.第2部分:通行線上的空氣動力學 |
(Railway applications - Aerodynamics - Part 2: Aerodynamics on open track; German version EN 14067-2:2003) |
| DIN EN 14067-3-2003 |
鐵路設施.空氣動力學.第3部分:隧道里的空氣動力學 |
(Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels; German version EN 14067-3:2003) |
| DIN EN 14068-2004 |
混凝土結構的防護和維修用產品和系統.試驗方法.在混凝土中不移動的情況下注漿裂紋防水性的測定 |
|
| DIN EN 14069-2004 |
石灰浸物質.描述和最低要求 |
(Liming materials - Description and minimum requirements; German version EN 14069:2003) |
| DIN EN 14069-2004 |
石灰浸物質.描述和最低要求 |
|
| DIN EN 1407-1998 |
飲用水處理用化合物.陰離子的和非離子的聚丙烯酰胺 |
(Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides; German version EN 1407:1998) |
| DIN EN 14070-2004 |
機床安全.組合機床和專用機床 |
(Safety of machine tools - Transfer and special purpose machines; German version EN 14070:2003) |
| DIN EN 14070-2004 |
機床安全.組合機床和專用機床 |
|
| DIN EN 14071-2005 |
LPG罐用減壓閥.輔助設備 |
|
| DIN EN 14072-2004 |
家具中的玻璃.試驗方法 |
(Glass in furniture - Test methods; German version EN 14072:2003) |
| DIN EN 14072-2004 |
家具中的玻璃.試驗方法 |
|
| DIN EN 14073-2-2004 |
辦公室家具.儲存家具.第2部分:安全要求 |
|
| DIN EN 14073-3-2004 |
辦公室家具.儲存家具.第3部分:結構穩定性和強度測定的試驗方法 |
|
| DIN EN 14074-2004 |
辦公室家具.工作臺、辦公桌和儲存家具.移動部件的強度和耐用性測定的試驗方法 |
|
| DIN EN 14075-2003 |
地下設備用石油液化氣儲氣容量不大于13m(上標3)的連續生產靜態焊接圓柱型鋼罐.設計和制造 |
(Static welded steel cylindrical tanks, serially produced for the storage of Liquiefied Petroleum Gas (LPG) having a volume not greater than 13 m and for installation underground - Design and manufacture; German version EN 14075:2002) |
| DIN EN 14075-2005 |
的連續生產的液化石油氣儲存用固定焊接圓柱形鋼罐.設計和制造 |
DIN EN 14075-2005 |
| DIN EN 14076-2004 |
木樓梯.術語 |
|
| DIN EN 14077-2004 |
石油產品.有機鹵素含量的測定.氧化微庫侖法 |
|
| DIN EN 14078-2004 |
液化石油產品.中間餾出物中脂肪酸甲脂(FAME)的測定.紅外光譜法 |
|
| DIN EN 14079-2003 |
非放射性醫療裝置.繃帶紗布、脫脂棉和粘膠紗布的性能要求和試驗方法 |
(Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze; German version EN 14079:2003) |
| DIN EN 1408-1998 |
飲用水制備用的化合物.聚(雙烯二甲基氯化胺) |
(Chemicals used for treatment of water intended for human consumption - Poly (diallydimethylammoniumchloride); German version EN 1408:1998) |
| DIN EN 14082-2003 |
食品.痕量素的測定.用干灰后的原子吸收光譜法測定鉛、鎘、鋅、銅、鐵和鉻 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing; German version EN 14082:2003) |
| DIN EN 14083-2003 |
食品.痕量素的測定.食品經壓煮后用石墨爐原子吸收光譜法測定鉛、鎘、鉻和鉬 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion; German version EN 14083:2003) |
| DIN EN 14084-2003 |
食品.痕量素的測定.食品經微波蒸煮后用原子吸收光譜法測定鉛、鎘、鋅、銅、和鐵 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion; German version EN 14084:2003) |
| DIN EN 14085-2003 |
彈性地板覆蓋物.活動鋪設預制裝配式樓板單規范 |
(Resilient floor coverings - Specification for floor panels for loose laying; German version EN 14085:2003) |
| DIN EN 14086-2003 |
紙和紙板.光澤度的測量.用平行束的45度,DIN法 |
(Paper and board - Measurement of specular gloss - 45?gloss with a parallel beam, DIN method; German version EN 14086:2003) |
| DIN EN 14089-2003 |
航空航天.航天產品保障.控制材料的極限壽命 |
(Aerospace - Space product assurance - The control of limited-life materials; German and English version EN 14089:2002) |
| DIN EN 1409-1998 |
飲用水制備用化合物.聚胺 |
(Chemicals used for treatment of water intended for human consumption - Polyamines; German version EN 1409:1998) |
| DIN EN 14090-2002 |
航空航天.航天產品保證.篩選航天材料的燃燒性能試驗 |
(Aerospace - Space product assurance - Flammability testing for the screening of space materials; German and English version EN 14090:2002) |
| DIN EN 14091-2003 |
航空航天.航天產品保證.航天材料篩選用的熱真空除氣試驗 |
(Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002) |
| DIN EN 14093-2003 |
航空航天.航天項目管理.組織和綜述指導 |
(Aerospace - Space project management - Organization and conduct of reviews; German and English version EN 14093:2002) |
| DIN EN 14095-2004 |
建筑物內的水調節設備.鋁陽極電解質處理設備.性能、安全和試驗要求 |
|
| DIN EN 14096-1-2003 |
無損檢驗.射線攝影膠片數字化系統的合格鑒定.第1部分:定義、圖像質量參數的定量測量、標準參考膠片和定性控 |
(Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control; German version EN 14096-1:2003) |
| DIN EN 14096-2-2003 |
無損檢驗.射線攝影膠片數字化系統的合格鑒定.第2部分:最低要求 |
(Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements; German version EN 14096-2:2003) |
| DIN EN 14097-2002 |
航空航天.航天產品保證.不合格控制系統 |
(Aerospace - Space product assurance - Nonconformance control system; German and English version EN 14097:2001) |
| DIN EN 14098-2002 |
航空航天.航天產品保證.檢驗航天材料和工藝的熱循環試驗 |
(Aerospace - Space product assurance - Thermal cycling test for the screening of space materials and processes; German and English version EN 14098:2001) |
| DIN EN 14099-2002 |
航空航天.航天產品保證.帶壓敏帶材的覆層和裝飾層的剝離和拉脫強度的測量 |
(Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001) |
| DIN EN 141-2000 |
呼吸防護裝置.毒氣過濾器和組合過濾器.要求、試驗、標記 |
(Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking; German version EN 141:2000) |
| DIN EN 1410-1998 |
飲用水制備用的化合物.陽離子聚丙烯醛酰胺 |
(Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides; German version EN 1410:1998) |
| DIN EN 14100-2002 |
航空航天.航天產品保證.載人航天器坐艙用的材料和裝配物品中的廢棄產品的測定 |
(Aerospace - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; German and English version EN 14100:2001) |
| DIN EN 14101-2002 |
航空航天.航天產品保證.控制應力腐蝕斷裂用的材料的選擇 |
(Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking; German and English version EN 14101:2001) |
| DIN EN 1411-1996 |
塑料管和防護管系統.熱塑塑料管.用梯級法測定抗外沖擊應力的能力 |
(Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996) |
| DIN EN 141101-1992 |
電子件質量評定協調體系.空白分規范:用絲杠和直接旋轉調整的微調電位計 |
(Harmonized system of quality assessment for electronic components; detail specification: lead-screw actuated and rotary preset potentiometers; german version EN 141101:1992) |
| DIN EN 14114-2002 |
建筑設備和工業設施的濕熱特性.水蒸汽擴散計算.制冷管絕緣系統 |
(Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002) |
| DIN EN 14115-2002 |
織物.大帳篷和相關產品用材料的燃燒特性.易燃性 |
(Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; German version EN 14115:2001) |
| DIN EN 14116-2003 |
危險物品運輸用槽罐車.產品識別裝置用數字接口 |
(Tanks for transport of dangerous goods - Digital interface for the product recognition device; German version EN 14116:2003) |
| DIN EN 14116-2005 |
危險物品運輸用槽罐車.產品識別裝置用數字接口 |
|
| DIN EN 14117-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.粘性注入產品的流出時間測定 |
|
| DIN EN 14118-1-2003 |
加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊)規范.第1部分:標識 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation; German version EN 14118-1:2003) |
| DIN EN 14118-2-2003 |
加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊)規范.第2部分:試驗方法和一般要求 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements; German version EN 14118-2:2003) |
| DIN EN 14118-3-2003 |
加強材料.紡織玻璃纖維墊(短切原絲和連續的長絲墊)規范.第3部分:特殊要求 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements; German version EN 14118-3:2003) |
| DIN EN 1412-1995 |
銅和銅合金.歐洲材料號碼系統 |
(Copper and copper alloys - European numbering system; German version EN 1412:1995) |
| DIN EN 14120-2003 |
防護服.滾軸運動設備使用者用腕部、掌部、膝部和肘部防護裝置.要求和試驗方法 |
(Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods; German version EN 14120:2003) |
| DIN EN 14121-2003 |
鋁和鋁合金.電工用鋁薄板材、帶材和板材 |
(Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications; German version EN 14121:2003) |
| DIN EN 14122-2003 |
食品.高效液相色譜法測定維生素B1的含量 |
(Foodstuffs - Determination of vitamin B1 by HPLC; German version EN 14122:2003) |
| DIN EN 14124-2005 |
帶內溢水口的沖洗水箱用入口閥 |
|
| DIN EN 14126 Berichtigung 1-2005 |
對DIN EN 14126-2004的勘誤 |
|
| DIN EN 14126-2004 |
防護服.防傳染制劑的防護服的性能要求和試驗方法 |
(Protective clothing - Performance requirements and test methods for protective clothing against infective agents; German version EN 14126:2003) |
| DIN EN 14126-2004 |
防護服.防傳染制劑的防護服的性能要求和試驗方法 |
|
| DIN EN 14127-2004 |
無損檢驗.超聲波厚度測量 |
|
| DIN EN 14128-2004 |
木材和木制產品的耐久性.用生物試驗測定有治病蟲害療效的木材防腐劑的性能標準 |
|
| DIN EN 14129-2005 |
LPG罐用減壓閥 |
|
| DIN EN 1413-1998 |
紡織品.含水萃取物中pH值的測定 |
(Textiles - Determination of pH of aqueous extract; German version EN 1413:1998) |
| DIN EN 14130-2003 |
食品.高效液相色譜法測定維生素C含量 |
(Foodstuffs - Determination of vitamin C by HPLC; German version EN 14130:2003) |
| DIN EN 14131-2003 |
食品.微生學測定法測定葉酸鹽含量 |
(Foodstuffs - Determination of folate by microbiological assay; German version EN 14131:2003) |
| DIN EN 14134-2004 |
建筑物通風.住宅通風形態的性能試驗和安裝檢查 |
|
| DIN EN 14135-2004 |
涂層.防火能力的測定 |
|
| DIN EN 14136-2004 |
體外診斷檢驗程序性能評估的外部質量評估方案的使用 |
|
| DIN EN 14137-2004 |
郵政服務.服務質量.利用跟蹤系統進行掛號郵件和其他類型郵件服務損失的測量 |
(Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system; German version EN 14137:2003) |
| DIN EN 14137-2004 |
郵政服務.服務質量.利用跟蹤系統進行掛號郵件和其他類型郵件服務損失的測量 |
|
| DIN EN 14139-2003 |
眼科光學.試戴鏡規范 |
(Ophthalmic optics - Specifications for ready-to-wear spectacles; German version EN 14139:2002) |
| DIN EN 1414-2000 |
粘附鎖緊件.后續檢驗的循環過程(包括補充件A1,2000) |
(Touch and close fasteners - Cycling procedure for subsequent testing (includes Amendment A1:2000); German version EN 1414:1996 + A1:2000) |
| DIN EN 14141-2004 |
天然氣輸送管道用閥門.性能要求和試驗 |
|
| DIN EN 14142-1-2003 |
郵政服務.地址數據庫.第1部分:郵政地址的組成部分 |
(Postal services - Address databases - Part 1: Components of postal addresses; German version EN 14142-1:2003) |
| DIN EN 14144-2003 |
救生圈.要求和試驗 |
(Lifebuoys - Requirements, tests; German version EN 14144:2003) |
| DIN EN 14145-2003 |
救生圈用夾持裝置 |
(Holders for lifebuoys; German version EN 14145:2003) |
| DIN EN 14146-2004 |
天然石料試驗方法.彈性的動態模量測定(通過基本的共振頻率測量) |
|
| DIN EN 14147-2004 |
天然石材試驗方法.抗鹽霧老化的測定 |
(Natural stone test methods - Determination of resistance to ageing by salt mist; German version EN 14147:2003) |
| DIN EN 14147-2004 |
天然石材試驗方法.抗鹽霧老化的測定 |
|
| DIN EN 1415-1997 |
粘附鎖緊件.切邊的性能 |
(Touch and close fasteners - Behaviour of slit selvedges; German version EN 1415:1996) |
| DIN EN 14153-1-2004 |
娛樂潛水服務.娛樂水肺潛水員訓練用與安全有關的最低要求.第1部分:1等.監督潛水員 |
|
| DIN EN 14153-2-2004 |
娛樂潛水服務.水肺潛水員訓練的安全相關最低要求.第2部分:水平2.獨立潛水員 |
(Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver; German version EN 14153-2:2003) |
| DIN EN 14153-2-2004 |
娛樂潛水服務.水肺潛水員訓練的安全相關最低要求.第2部分:水平2.獨立潛水員 |
|
| DIN EN 14153-3-2004 |
娛樂潛水服務.水肺潛水員訓練的安全相關最低要求.第3部分:水平3.下潛領頭人 |
(Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader; German version EN 14153-3:2003) |
| DIN EN 14153-3-2004 |
娛樂潛水服務.水肺潛水員訓練的安全相關最低要求.第3部分:水平3.下潛領頭人 |
|
| DIN EN 14154-1-2005 |
水表.第1部分:一般要求 |
|
| DIN EN 14154-1-2005 |
水表.第1部分:一般要求 |
|
| DIN EN 14154-2-2005 |
水表.第2部分:使用裝置和條件 |
|
| DIN EN 14154-2-2005 |
水表.第2部分:使用裝置和條件 |
|
| DIN EN 14154-3-2005 |
水表.第3部分:試驗方法和設備 |
|
| DIN EN 14154-3-2005 |
水表.第3部分:試驗方法和設備 |
|
| DIN EN 14157-2005 |
天然石料試驗方法.耐磨性的測定 |
|
| DIN EN 14158-2004 |
天然石料試驗方法.破裂力的測定 |
|
| DIN EN 1416-1997 |
粘附鎖緊件.彎曲性測定 |
(Touch and close fasteners - Determination of curvature; German version EN 1416:1996) |
| DIN EN 14160-2002 |
航空航天.航天工程技術.軟件 |
(Aerospace - Space engineering - Software; German and English version EN 14160:2001) |
| DIN EN 14161-2004 |
石油和天然氣工業.管道傳輸系統 |
|
| DIN EN 14163-2002 |
石油和天然氣工業.管道運輸系統.管道焊接 |
(Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English) |
| DIN EN 14165-2005 |
空間工程標準.斷裂控制 |
|
| DIN EN 1417-1997 |
橡膠機械和塑料機械.軋機.安全要求 |
(Rubber and plastics machines - Two roll mills - Safety requirements; German version EN 1417:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com