標準號 |
中文名稱 |
英文名稱 |
| DIN 18065-2000 |
樓房的樓梯.術語、測量規則和主要尺寸 |
(Stairs in buildings - Terminology, measuring rules, main dimensions) |
| DIN 18069-1985 |
住宅中支架階梯.測量與設計 |
Stairs with load-bearing bolts for residential buildings; design and execution |
| DIN 18073-1990 |
建筑結構中的可卷百葉窗和遮光窗.術語.要求 |
(Roller shutters, solar shading and black-out equipment in building construction; concepts and requirements) |
| DIN 1808-1964 |
橫楔拉緊用變徑套筒 |
(Adaptor Sockets for Cotter Retention) |
| DIN 18089-1-1984 |
防火閘門.防火門填料.礦物纖維板.概念、標志、要求、檢驗 |
(Fire barriers; fillers for fire-doors; mineral fibre boards (felts); definition, designation, requirements, tests) |
| DIN 1809-1961 |
直柄工具用傳動舌 |
Driving Tenons for Tools with Parallel Shank |
| DIN 18090-1997 |
電梯.電梯井筒.帶防火等級F90的防火墻的電梯井筒用旋轉門和折疊門 |
Lifts - Lift landing doors (hinged, pivoted and folding) for lift walls with walls of the fire resistance class F 90 |
| DIN 18091-1993 |
電梯.帶防火等級F90防火墻的井筒用橫移門 |
Lifts; lift landing sliding doors for lift wells with walls of the fire resistant class F 90 |
| DIN 18092-1992 |
電梯.有F90級防火墻的升降機井中小型載貨電梯用豎拉門 |
Lifts; vertical sliding doors for small freight carrying lifts for lift shafts with walls of the fire-resistant class F 90 |
| DIN 18093-1987 |
防火閘門.在砌墻或混凝土制實心墻中安裝防火門.閂位置和形狀.安裝 |
Fire barriers; installation of fire doors in fireproof masonry or concrete walls; position and shapes of anchorages, installation |
| DIN 18095-1-1988 |
門.防煙門.概念和要求 |
(Smoke control doors; concepts and requirements) |
| DIN 18095-3-1999 |
煙控閘門.第3部分:試驗結果的使用 |
(Smoke control shutters - Part 3: Application of test results) |
| DIN 1810-1979 |
鉤形扳手 |
(Hook wrenches) |
| DIN 18100-1983 |
門.給門開的墻洞.按DIN4172的尺寸決定門洞尺寸 |
(Doors; wall openings for doors with dimensions in accordance with DIN 4172) |
| DIN 18101-1985 |
門.住宅建筑的門.門板尺寸.搭扣座位和鎖的安裝位置.尺寸的相關性 |
(Doors; doors for residential buildings; sizes of door leaves, position of hinges and lock, interdependence of dimensions) |
| DIN 18104-1-2000 |
機械安全設備.第1部分:門窗用輔助防盜產品.要求和試驗方法 |
(Mechanical security devices - Part 1: Additional burglar resistant products for windows and doors; requirements and test methods) |
| DIN 18104-2-2002 |
機械安全設備.第2部分:門窗用輔助防盜產品的要求和試驗方法 |
(Mechanical security devices - Part 2: Additional burglar resistant products for windows and doors, requirements and test methods) |
| DIN 18106-2003 |
防盜柵欄.要求和試驗方法 |
(Burglar resistant gratings - Requirements and test methods) |
| DIN 18111-1-1985 |
門框.鋼門框.折式門的標準門框 |
(Door frames; steel door frames; standard door frames for rebated doors) |
| DIN 18111-1-2004 |
門框.鋼門框.第1部分:磚石建筑中折式門的標準門框 |
|
| DIN 18111-2-2004 |
門框.鋼門框.第2部分:金屬門窗梃石膏墻的標準門框 |
|
| DIN 18111-3-2005 |
門框.鋼門框.第3部分:凹凸榫接和非凹凸榫接門扉用特殊門框 |
|
| DIN 18111-4-2004 |
門框.鋼門框.第4部分:鋼門框的安裝 |
|
| DIN 18121-1-1998 |
土壤試樣的研究和測試.水含量.第1部分:用爐烘干法測定 |
(Soil, investigation and testing - Water content - Part 1: Determination by drying in oven) |
| DIN 18121-2-2001 |
土壤.勘探及試驗.含水量.第2部分:快速測定法 |
(Soil - Investigation and testing; Watercontent - Part 2: Determination by rapid methods) |
| DIN 18122-1-1997 |
建筑地基.土壤試樣的分析.狀態極限(濃度極限).第1部分:液流極限和塑性極限的測定 |
(Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit) |
| DIN 18122-2-2000 |
土壤.調查和試驗.第2部分:收縮限度的測定 |
(Soil - investigation and testing - Part 2: Determination of the shrinkage limit) |
| DIN 18123-1996 |
建筑地基.土壤試樣的分析.顆粒分布的測定 |
(Soil, investigation and testing - Determination of grain-size distribution) |
| DIN 18124-1997 |
建筑地基.試驗和試驗儀器.顆粒密度的測定.毛細管比重計.寬口比重計 |
(Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer) |
| DIN 18125-1-1997 |
建筑地基.土壤試樣檢驗.土壤密度測定.第1部分:實驗室試驗 |
(Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests) |
| DIN 18125-2-1999 |
土樣的勘測和試驗.土壤密度測定.第2部分:野外試驗 |
(Soil investigation and testing - Determination of density of soil - Part 2: Field tests) |
| DIN 18126-1996 |
建筑地基.試驗及試驗儀器.最疏松及最質密巖層非粘結性土壤密度的測定 |
(Soil, investigation and testing - Determination of density of non-cohesive soils for maximum and minimum compactness) |
| DIN 18127-1997 |
土壤.勘察和試驗.普氏貫入試驗 |
(Soil; Investigation and testing - Proctor-test) |
| DIN 18128-2002 |
土壤.調查和檢驗.灼燒損失的測定 |
(Soil - Investigation and testing - Determination of ignition loss) |
| DIN 18129-1996 |
建筑地基.試驗和試驗儀器.石灰含量的測定 |
(Soil, investigation and testing - Determination of lime content) |
| DIN 18130-1-1998 |
建筑地基.土壤試樣的研究.透水系數測定.第1部分:試驗室試驗 |
(Soil - investigation and testing; Determination of the coefficient of water permeability - Part 1: Laboratory tests) |
| DIN 18132-1995 |
地基,試驗和試驗儀器.吸水能力測定 |
(Soil, testing procedures and testing equipment - Determination of water absorption) |
| DIN 18134-2001 |
建筑地基.試驗程序和試驗設備.板壓試驗 |
(Soil; Testing procedures and testing equipment - Plate load test) |
| DIN 18136-1996 |
建筑地基.土質試樣檢驗.單軸向壓力試驗. |
(Soil - Investigation and testing - Unconfined compression test) |
| DIN 18137-1-1990 |
建筑地基.試驗和試驗儀器.抗切強度的測定.概念和基本試驗條件 |
(Soil, testing procedures and testing equipment; determination of shear strenght; concepts and general testing conditions) |
| DIN 18137-2-1990 |
建筑基地.試驗程序和試驗設備.剪切強度的測定.三軸向試驗 |
(Soil, testing procedures and testing equipment; determination of shear strength; triaxial test) |
| DIN 18137-3-2002 |
基地,勘測和試驗.剪切強度的測定.第3部分:直接剪切試驗 |
(Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test) |
| DIN 1814-1979 |
可調絲錐扳手 |
(Tap Wrenches; Adjustable) |
| DIN 18147-1-1987 |
三外層家用煙囪的建筑材料及結構件.煙囪系統的繪制.檢驗并記錄 |
(Building material and building elements for three-layered chimneys; discription, test and registration of chimney systems) |
| DIN 18147-2-1982 |
三外層家用煙囪的建筑材料及結構件.建筑外層用的輕質混凝土成型件.要求及檢驗 |
(Building material and building elements for three-layered chimneys; elements of light-weight concrete for the outer layer; requirements and tests) |
| DIN 18147-3-1982 |
三外層家用煙囪的建筑材料及結構件.內層用輕質混凝土成型件.要求及檢驗 |
(Building material and building elements for three-layered chimneys; elements of light-weight concrete for the inner layer; requirements and tests) |
| DIN 18147-5-1987 |
三外層家用煙囪的建筑材料及結構件.絕熱材料.要求及檢驗 |
(Building material and building elements for three-layered chimneys; insulating materials; requirements and tests) |
| DIN 18148-2000 |
輕質混凝土空心壁板 |
(Light weight concrete hollow-boards) |
| DIN 1815-2004 |
食品運輸用有隔熱儲貨空間的載重有篷運貨汽車.要求和試驗 |
|
| DIN 18150-1-1979 |
家用煙囪的建筑材料和構件.輕質混凝土制的異形件.用模板澆制的煙囪.要求 |
(Building materials and components for building chimneys; lightweight concrete flues, homogenous chimneys, requirements) |
| DIN 18150-2-1987 |
家用煙囪的建筑材料和部件.輕質混凝土制的異型件.用模板澆制的煙囪.檢驗和監督 |
(Building material and elements for one-layered chimneys; lightweight concrete flues; examination and supervision) |
| DIN 18151-1987 |
輕質混凝土制的空心砌塊 |
(Lightweight concrete hollow blocks) |
| DIN 18152-1987 |
輕質混凝土制的空心磚和空心塊 |
(Lightweight concrete solid bricks and blocks) |
| DIN 18153-1989 |
混凝土砌塊 |
(Normal-weight concrete masonry units) |
| DIN 18157-1-1979 |
稀灰漿工藝中陶瓷襯砌用材料.液體的凝固薄底板灰漿 |
(Execution of ceramic linings by thin mortar bed technique; hydraulic mortar) |
| DIN 18157-2-1982 |
稀灰漿工藝中陶瓷襯砌用材料.分散粘合劑 |
(Application of ceramic tiling using the thin-bed method; dispersion adhesives) |
| DIN 18157-3-1986 |
稀灰漿工藝中陶瓷襯砌用材料.環氧樹脂粘合劑 |
(Application of ceramic tiling by the thin bed method using epoxy resin adhesives) |
| DIN 18158-1986 |
熔渣地面板磚 |
(Clinker floor tiles) |
| DIN 18159-1-1991 |
建筑工業作現場澆泡沫用泡沫塑料.絕熱和防寒用現澆聚氨酯泡沫塑料.應用、性能、結構、檢驗 |
(Cellular plastics as in-situ cellular plastics in building; in-situ polyurethane (PUR) foam for thermal insulation; application, properties, execution, testing) |
| DIN 18159-2-1978 |
建筑工業及現場澆泡沫用泡沫塑料.絕熱用尿素甲醛樹脂現澆泡沫塑料.應用、性能、結構、檢驗 |
(Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing) |
| DIN 1816-1971 |
頭部帶十字槽的圓螺母.米制ISO細螺紋 |
(Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread) |
| DIN 18160-1-2001 |
煙囪.第1部分:設計和性能 |
(Chimneys - Part 1: Design and performance) |
| DIN 18160-5-1998 |
排放廢氣設備.第5部分:煙囪清理工作用裝置.要求,計劃與設計 |
(Chimneys - Part 5: Appliances for chimney-sweep work; requirements, planning and constructions) |
| DIN 18162-2000 |
輕質混凝土.無鋼筋墻板 |
(Light weight-concrete wallboards, unreinforced) |
| DIN 18168-1-1981 |
輕型天花板襯及天花板底襯.施工要求 |
(Light ceiling linings and underceilings; Construction requirements) |
| DIN 18168-2-1984 |
輕型天花板襯及天花板底襯.金屬分析構件和天花板吊棒的負載能力的檢定 |
(Lightweight ceiling linings and suspended ceilings; verification of the loadbearing capacity of metal substructures and hangers) |
| DIN 18169-1962 |
石膏蓋板.背面邊緣加厚蓋板 |
(Gypsum ceiling board; slabs with bulged edge on the reverse) |
| DIN 18178-1972 |
混凝土和鋼筋混凝土制罩式煙道.保護罩和煙道底板.尺寸.要求.檢驗 |
(Concrete and reinforced concrete ducts; hoods and bases for ducts, dimensions, requirements, testing) |
| DIN 18180-1989 |
石膏板.型式.要求.檢驗 |
(Gypsum plasterboard; types, requirements and testing) |
| DIN 18181-1990 |
高層建筑用石膏紙板.加工處理的原則 |
(Gypsum plasterboards for building construction; guidelines regarding workmanship) |
| DIN 18182-1-1987 |
石膏紙板加工用配件.薄鋼板型材 |
(Accessoires for use with gypsum plasterboards; steel plate sections) |
| DIN 18182-2-1987 |
石膏紙板加工用配件.快速建筑螺釘 |
(Accessories for use with gypsum plasterboards; dry wall screw) |
| DIN 18182-3-1987 |
石膏紙板加工用配件.夾子 |
(Accessories for use with gypsum plasterboards; staples) |
| DIN 18182-4-1987 |
石膏紙板加工用配件.釘子 |
(Accessories for use with gypsum plasterboards; nails) |
| DIN 18183-1988 |
石膏紙板組裝墻.金屬立柱結構 |
(Prefabricated gypsum plasterboard; metal stud partitions) |
| DIN 18184-1991 |
帶聚苯乙烯硬質泡沫或聚醋酯硬質泡沫作絕緣材料的石膏加層壁板 |
(Gypsum plaster boards with polystyrene or polyurethane rigid foam as insulating material) |
| DIN 18186-2004 |
預制混凝土汽車庫.整體的或由屋高件組成的預制加筋混凝土車庫規范 |
|
| DIN 18190-4-1992 |
建筑物防水用材料.帶金屬箔夾層的防水板.概念.標志.要求 |
(Waterproof sheeting for the waterproofing of buildings; waterproof sheeting with inlay of metal foil; definition, designation, requirements) |
| DIN 18191-1980 |
作瀝青路襯底的機織玻璃纖維織物 |
(Woven glass fabric as inlay bituminous sheeting) |
| DIN 18192-1985 |
對于瀝青和瀝青聚合物把固公聚酯纖維網作為填料.概念.標志.要求.檢驗 |
(Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing) |
| DIN 18195-1-2000 |
建筑物的防水層.第1部分:原理、定義及防水層類型的屬性 |
(Water-proofing of buildings - Part 1: Principles, definitions, attribution of waterproofing types) |
| DIN 18195-10-1983 |
建筑物密封層.防護層和防護措施 |
(Waterproofing of buildings and structures; protective layers and protective measures) |
| DIN 18195-10-2004 |
建筑物的防水性.第10部分:防護層和防護措施 |
|
| DIN 18195-2-2000 |
建筑物的防水層.第2部分:材料 |
(Water-proofing of buildings - Part 2: Materials) |
| DIN 18195-3-2000 |
建筑物的防水層.第3部分:地面的要求和材料的工作特性 |
(Water-proofing of buildings - Part 3: Requirements to the ground and working properties of materials) |
| DIN 18195-4-2000 |
建筑物的防水層.第4部分:防水層防地面潮氣(毛細水、存留水)和地板下及墻上非累積滲漏水的設計和施工 |
(Water-proofing of buildings - Part 4: Water-proofing against ground moisture (capillary water, retained water) and non-accumulating seepage water under floor slabs and on walls, design and execution) |
| DIN 18195-5-2000 |
建筑物的防水層.第5部分:地板和濕地防非擠壓水的防水層.設計與施工 |
(Water-proofing of buildings - Part 5: Water-proofing against non-pressing water on floors and in wet areas; design and execution) |
| DIN 18195-6-2000 |
建筑物的防水層.第6部分:防外擠壓水和累積滲漏水的防水層.設計與施工 |
(Water-proofing of buildings - Part 6: Water-proofing against outside pressing water and accumulating seepage water; design and execution) |
| DIN 18195-7-1989 |
建筑物防水.防內擠壓水.測量與施工 |
(Waterproofing of buildings and structures; waterproofing sheeting subjected to hydrostatic pressure from the inside; design and workmanship) |
| DIN 18195-8-1983 |
建筑物密封層.建筑縫間的密封 |
(Waterproofing of buildings and structures; waterproofing over movement joints) |
| DIN 18195-8-2004 |
建筑物的防水性.第8部分:活動連接接頭的防水性 |
|
| DIN 18195-9-1986 |
建筑物密封層.滲透.通道.止流 |
(Waterproofing of buildings and stuctures; penetrations, transitions, closures) |
| DIN 18195-9-2004 |
建筑物的防水性.第9部分:滲透、轉換、連接和端接 |
|
| DIN 18196-1988 |
土方工程和基礎工程.建筑工程用土壤分類 |
(Soil classification for civil engineering purposes) |
| DIN 18200-2000 |
建筑產品的一致性評估.認證機構對建筑產品的認證 |
(Assessment of conformity for construction products - Certification of construction products by certification body) |
| DIN 18201-1997 |
建筑業用公差.概念,原則,用途,檢驗 |
(Tolerances in building - Terminology, principles, application, testing) |
| DIN 18202-1997 |
高層建筑中的尺寸公差.建筑物 |
(Dimensional tolerances in building construction - Buildings) |
| DIN 18202-2005 |
建筑施工公差.建筑物 |
|
| DIN 18203-1-1997 |
高層建筑中的尺寸公差.混凝土預制件.鋼筋混凝土預制件和應力混凝土預制件 |
(Tolerances in building construction - Part 1: Prefabricated components made of concrete, reinforced concrete and prestressed concrete) |
| DIN 18203-2-1986 |
高層建筑尺寸公差.鋼預制件成品 |
(Tolerances in building; prefabricated steel components) |
| DIN 18203-3-1984 |
高層建筑尺寸公差.木制建筑部件和復合木材制品 |
(Tolerances for building; building components of timber and wood based panel products) |
| DIN 18205-1996 |
建筑設計摘要 |
(Brief for building design) |
| DIN 18215-1973 |
混凝土與鋼筋混凝土建筑物用木制模板.標準尺寸0.5×1.5m.厚21mm |
(Timer form boards for concrete and reinforced concrete structures; standard dimension 0,50 m1,50 m; thickness = 21 mm) |
| DIN 18216-1986 |
模板系桿用作混凝土模板.要求檢驗.應用 |
(Formwork ties; requirements, testing, use) |
| DIN 18217-1981 |
混凝土面及模板表面 |
(Concrete surfaces and formwork surface) |
| DIN 18218-1980 |
垂直模板上新鮮混凝土的壓力 |
(Pressure of fresh concrete on vertical formwork) |
| DIN 18225 Bb.1-1988 |
工業建筑.工業建筑中的交通道路.規程 |
(Industrial construction; traffic ways in industrial buildings; regulations) |
| DIN 18225-1988 |
工業建筑.工業建筑中交通道路 |
(Industrial construction; traffic ways in industrial buildings) |
| DIN 1823-1-1978 |
工具制造用角度銑刀.尺寸 |
(Angular Milling Cutters for Toolmaking; Dimensions) |
| DIN 1823-2-1992 |
工具制造用角度銑刀.交貨技術條件 |
(Single-angle cutters for toolmaking; technical delivery conditions) |
| DIN 18230-1 Berichtigung 1-1998 |
對DIN18320-1:1998-05的校正 |
(Corrigenda to DIN 18230-1:1998-05) |
| DIN 18230-1-1998 |
工業建筑中的結構防火.第1部分:分析計算所要求的耐火時間 |
(Structural fire protection in industrial buildings - Part 1: Analytically required fire resistance time) |
| DIN 18230-2-1999 |
工業建筑中結構防火.第2部分:倉庫放置中材料燒損性能的測定.燒損系數m值 |
(Structural fire protection in industrial buildings - Part 2: Determination of combustion behaviour of materials in storage arrangement - Combustion factor m) |
| DIN 18232-1-2002 |
煙霧和熱控制系統.第1部分:術語、安全目標 |
(Smoke and heat control systems - Part 1: Terms, safety objectives) |
| DIN 18232-2-2003 |
排煙排熱控制系統.第2部分:自然排煙和排熱通風機.設計、要求和安裝 |
(Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators; Design, requirements and installation) |
| DIN 18232-3-1984 |
工業建筑中防火結構.排煙排熱設備.煙道.檢驗 |
(Structural fire protection in industrial buildings; smoke and heat control installations; smoke vents; testing) |
| DIN 18232-4-2003 |
煙和熱控制系統.第4部分:排熱系統(WA).試驗方法 |
(Smoke and heat control systems - Part 4: Heat exhaust systems (WA); Test methods) |
| DIN 18232-5-2003 |
煙和熱控制裝置.第5部分:動力排煙系統.設計要求 |
(Smoke and heat control installations - Part 5: Powered smoke exhaust systems; Requirements, design) |
| DIN 18234-1 Bb.1-1995 |
工業建筑中的防火耐火結構.符合DIN18234-1的屋頂驗收示例 |
(Structural fire protection in industrial buildings - Examples for approved roofs according to DIN 18234-1) |
| DIN 18234-1-2003 |
建筑物大型屋頂?shù)姆阑鸢踩?防止從下部起火.第1部分:定義、要求和試驗.封閉式屋頂區 |
(Fire safety of large roofs for buildings - Fire exposure from below - Part 1: Definitions, requirements and tests; Roof areas without openings) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com