標準號 |
中文名稱 |
英文名稱 |
| DIN 44558-2-1983 |
家用煮蛋器.使用性能.檢驗 |
(Electric egg boiler for household use; characteristics of performance; tests) |
| DIN 44558-3-1983 |
家用煮蛋器.使用性能.要求 |
(Electric egg boiler for household use; characteristics of performance; requirements) |
| DIN 44561-1970 |
家用電熨平機.概念 |
(Electric ironing machines for domestic use; definitions) |
| DIN 44562-1970 |
家用電熨平機.檢驗 |
(Electric ironing machines for domestic use; test) |
| DIN 44563-1970 |
家用電熨平機.要求 |
(Electric ironing machines for domestic use; requirement) |
| DIN 44574-1-1985 |
室內電取暖器.貯熱器充電控制.使用性能.概念 |
(Electic room heating; charging controls of storage heaters; characteristics of performance, definitions) |
| DIN 44574-2-1985 |
室內電取暖器.貯熱器的充電控制.使用性能.有熱機械充電調節器的貯熱器充電控制檢驗 |
(Electic room heating; charging controls of storage heaters, characteristics of performance, testing of charging controls of storage heaters with thermomechanical charging controller) |
| DIN 44574-3-1985 |
室內電取暖器.貯熱器的充電控制.使用性能有熱機械充電調節器的貯熱單充電控制的檢驗 |
(Electric room heating; charging controls of storage heater, characteristics of performance, testing of charging controls of storage heaters with electronic charging controller) |
| DIN 44574-4-1985 |
室內電取暖器.貯熱器的充電控制.使用性能對帶有熱機械充電調節器的充電控制要求 |
(Electric room heating; charging controls of storage heaters; characteristics of performance, requirements for charging controls of storage heaters with thermomechanical charging controller) |
| DIN 44574-5-1985 |
室內電取暖器.貯熱器的充電控制.使用性能對帶存電充電調節器的充電控制要求 |
(Electric room heating; charging controls of storage heaters; characteristics of performance, requirements for charging controls of storage heaters with electronic charging controller) |
| DIN 44574-6-1985 |
室內電取暖器.貯熱器的充電控制.使用性能貯熱器充電控制的使用技術說明 |
(Electric room heating; charging controls of storage heaters; characteristics of performance, notes relating to the use of charging controls of storage heaters) |
| DIN 44576-1-1987 |
室內電取暖器.地板貯熱.使用性能.概念 |
(Electric room heating; thermal storage floor heating; characteristics of performance; definitions) |
| DIN 44576-2-1987 |
室內電取暖器.地板貯熱.使用性能.檢驗 |
(Electric room heating; thermal storage floor heating; characteristics of performance; tests) |
| DIN 44576-3-1987 |
室內電取暖器.地板貯熱.使用性能.要求 |
(Electric room heating; thermal storage floor heating; characteristics of performance; requirements) |
| DIN 44576-4-1987 |
室內電取暖器.地板貯熱.使用性能.空間測量 |
(Electric room heating; thermal storage floor heating; characteristics of performance; calculation for room heating) |
| DIN 44704-1978 |
電氣工具用手柄 |
(Handles for electric tools) |
| DIN 44717-1988 |
手持電動工具.排氣套管.連接尺寸 |
(Hand-held motor-operated electric tools; exhaust spigots; connecting dimensions) |
| DIN 44766-2-1981 |
電阻焊變壓器；吊掛式變壓器；尺寸.參數 |
(Resistance welding transformers; suspension type, dimensions, characteristics) |
| DIN 44766-3-1981 |
電阻焊變壓器；法蘭連接的變壓器；尺寸.參數 |
(Resistance welding transformers; transformers with flanged joints; dimensions, characteristics) |
| DIN 44767-1976 |
200A.550V電阻焊接變壓器初級線圈插接裝置 |
(Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V) |
| DIN 44770-1-1982 |
氣動焊接汽缸.雙向作用.無阻尼.雙供氣.連接尺寸 |
(Pneumatic welding cylinder, double acting without cushion, double piston, connection dimensions) |
| DIN 44771-1980 |
電阻焊機的連接角度４５和９０度 |
(Connection angle 45 and 90, for resistance welding equipment) |
| DIN 44806-1978 |
測量.控制.調節.液體閃爍計數用燒瓶的尺寸 |
(Dimensions of vials for liquid scintillation counting) |
| DIN 44807-1979 |
測量.控制.調節.放射性測量用玻璃和塑料制試管的尺寸 |
(Dimensions of test tubes made of glass and plastics for radioactivity measurements) |
| DIN 44809-1985 |
測量和監督空氣中氚的射線保護裝置 |
(Radiation protection equipment for the measuring and monitoring of airborne tritium; IEC 60710, edition 1981 modified) |
| DIN 44834-1990 |
核電廠安全系統的電驅動設備 |
(Electrical drives of the safety systems in nuclear power plants) |
| DIN 44835-1986 |
反應堆保護系統的信號處理裝置及傳感器的定型試驗 |
(Typetests of sensors and signal processing devices of the protection system in nuclear power stations) |
| DIN 44836-1985 |
核電站安全系統導向裝置和控制系統試驗 |
(Tests on instrumentation and control systems important to safety in nuclear power stations) |
| DIN 44858-1-1978 |
家用電爐.定時開關.定時斷路器和測微時計.使用特性.概念 |
(Timer, clocks having switching mechanism, short-time signalling devices for household electric ranges; characteristics of performance, definitions) |
| DIN 44858-2-1978 |
家用電爐.定時開關.定時斷路器和測微時計.使用特性.檢驗 |
(Timer, clocks having switching mechanism, short-time signalling devices for household electric ranges; characteristics of performance, tests) |
| DIN 44858-3-1978 |
家用電爐.定時開關.定時斷路器和測微時計.使用特性.要求 |
(Timer, clocks having switching mechanism, short-time signalling devices for household electric ranges; characteristics of performance, requirements) |
| DIN 4486-1962 |
帶噴頭浴盆.陶瓷 |
(Shower-receptor; fireclay, glazed) |
| DIN 44871-1-1987 |
電子加熱體和發熱體.概念 |
(Electrical heating elements and heating inserts; definitions) |
| DIN 44872-1991 |
電熔氧化鎂的檢驗 |
(Testing of electromagnesia) |
| DIN 44874-1-1991 |
帶金屬罩的電加熱管.計算.結構和要求 |
(Electrical metal-sheathed (tubular) heating elements; calculation, construction and requirements) |
| DIN 44874-2-1976 |
帶金屬罩的電加熱管.直徑為6.5mm和8.5mm.連接 |
(Electrical tubular heating elements, metal sheated, 6,5 mm and 8,5 mm diameter; terminals) |
| DIN 44874-3-1980 |
帶金屬罩的電加熱管.直徑6.5mm和8.5mm.測算壽命和超負荷性能 |
(Electrical metal sheated tubular heating elements; 6,5 mm and 8,5 mm diameter, determination of ageing and overload characteristics) |
| DIN 44875-1986 |
帶金屬罩的電加熱管.應用 |
(Electrical metal sheathed tubular heating elements; use) |
| DIN 44876-1981 |
帶金屬罩的電加熱管.用六角螺紋接套 |
(Hexagonal nipples for electrical tubular heating elements) |
| DIN 44879-1985 |
帶金屬罩的電加熱管的套管及螺旋頭的扁平六角螺母 |
(Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated) |
| DIN 4488-1962 |
浴盆.帶噴頭浴盆.灰鑄鐵 |
(Gray iron shower baths) |
| DIN 44897-1-1977 |
電熱水器.臺置式敝口貯水器和鍋爐用混水龍頭.連接尺寸和允許壓力損耗 |
(Stationary electric water heaters; dimensions and permissible pressure losses for mixing batteries for open-outlet water heaters above table) |
| DIN 44899-4-1980 |
電熱水器.額定容量50升以內的封閉貯水器壁厚的計算.安全技術要求 |
(Thermal storage water heater; calculation of thickness of the wall of boilers up to 50 litres rated capacity, safety requirements) |
| DIN 44899-5-1971 |
電熱水器.容量為50-2000升的封閉貯水器壁厚的計算原則 |
(Electrical water-heater; directions of the calculation of thickness of the wall for containers of closed heaters from 50 up to 2000 liters) |
| DIN 44899-6-1986 |
電熱水器.額定容量為1000升以內.低噪聲結構的條件 |
(Electrical water heaters; rated capacity up to 1000 litres; requirements for low-noice level design) |
| DIN 44901-1-1985 |
電熱水器.熱水貯存器.立式結構200至1000升.封閉式貯水器的交貨尺寸 |
(Electric thermal storage water heater for floor-mounting, 200 to 1000 litres; dimensions for closed type) |
| DIN 44901-2-1982 |
電熱水器.熱水貯存器.立式結構額定貯水量200至-1000升 |
(Electric water heater; thermal storage water heater, floor mounting type, capacity 200 up to 1000 litres rated input) |
| DIN 44902-1-1980 |
電熱水器.熱水貯存器.懸式結構.5至15升.連接尺寸 |
(Electric thermal storage water heater 5 to 15 litres; mounting dimensions) |
| DIN 44902-2-1982 |
電熱水器.熱水貯存器.懸式結構30至-50升.連接尺寸 |
(Electric thermal storage water heater for wall-mounting; 30 to 150 liters; mounting dimensions) |
| DIN 44902-3-1982 |
電熱水器.熱水貯存器.懸式結構額定貯水量5-150升 |
(Electric water heater; thermal storage water heater, wall mounting type, capacity 5 up to 150 litres rated input) |
| DIN 44902-4-1972 |
電熱水器.鍋爐.懸式結構.敝口式鍋爐的設備功率 |
(Non-thermal storage water heaters for wall mounting; thermally insulated or lightly insulated, ratings for open-outlet type) |
| DIN 44921-1-1985 |
金屬殼的電熱器.尺寸 |
(Electric cartridge-type heating elements, metal-sheathed; dimensions) |
| DIN 44921-2-1985 |
金屬殼的電熱器.高功率電熱器.尺寸 |
(Electric cartridge-type heating elements, with high watt density, metal-sheathed; dimensions) |
| DIN 44921-3-1985 |
金屬殼的電熱器.要求 |
(Electric cartridge-type heating elements, metal-sheathed; requirements) |
| DIN 44922-1-1985 |
有螺旋頭G11/2B的螺旋電熱體和有金屬外殼直徑為6.5mm及8.5mm的電熱管.尺寸和額定消耗功率 |
(Electric immersion heating elements; screw-in type, G 1 1/2 B thread with metal-sheathed tubular heating elements of 6,5 and 8,5 mm diameter; dimensions and input rating) |
| DIN 44922-2-1985 |
有螺旋頭的電加熱體和金屬殼電子管.尺寸 |
(Electric immersion heating elements, screw-in type, with cartridge-type heating elements, metal-sheathed; dimensions) |
| DIN 44922-3-1985 |
螺旋式電熱體.要求 |
(Electric immersion heating elements; requirements) |
| DIN 44926-1-1991 |
電熱件用陶瓷件.多孔管.尺寸 |
(Ceramic parts for electric heating elements; multiple hole tubes; dimensions) |
| DIN 44926-2-1991 |
電熱件用陶瓷件.開口式多孔管.尺寸 |
(Ceramic parts for electric heating elements; open multiple hole tubes; dimensions) |
| DIN 44926-3-1991 |
電熱件用陶瓷件.帶接線零件的螺旋座.尺寸 |
(Ceramic parts for electric heating elements; helical discs with connecting parts; dimensions) |
| DIN 44932-1984 |
絕緣珠 |
(Insulating beats) |
| DIN 44953-1-1991 |
電動廚房用具.橘汁壓榨機.使用性能.術語 |
(Electrical kitchen machines; citrus juice extractors; characteristics of performance, definitions) |
| DIN 44953-2-1991 |
電動廚房用具.橘汁壓榨機.使用性能.檢驗 |
(Electrical kitchen machines; citrus juice extractors; characteristics of performance, tests) |
| DIN 44953-3-1991 |
電動廚房用具.橘汁壓榨機.使用性能.要求 |
(Electrical kitchen machines; citrus juice extractors; characteristics of performance, requirements) |
| DIN 44954-1-1991 |
電動廚房用具.開罐器.使用性能.術語 |
(Elektrical kitchen machines; tin openers; characteristics of performance, definitions) |
| DIN 44954-2-1991 |
電動廚房用具.開罐器.使用性能.檢驗 |
(Electrical kitchen machines; tin openers; characteristics of performance, tests) |
| DIN 44954-3-1991 |
電動廚房用具.開罐器.使用性能.要求 |
(Electrical kitchen machines; tin openers; characteristics of performance, requirements) |
| DIN 44973-1-1981 |
家用電動空氣調濕器.使用性能.概念 |
(Electric humidifier for household use; characteristics for performance, definitions) |
| DIN 44973-2-1981 |
家用電動空氣調濕器.使用性能.檢驗 |
(Electric humidifier for household use; characteristics of performance, tests) |
| DIN 44973-3-1981 |
家用電動空氣調濕器.使用性能.要求 |
(Electric humidifier for household use; characteristics of performance, requirements) |
| DIN 44974-1-1978 |
家用電扇.使用性能.概念 |
(Electric household fans; characteristics of performance, definitions) |
| DIN 44974-2-1978 |
家用電扇.使用性能.檢驗 |
(Electric household fans; characteristics of performance, tests) |
| DIN 44974-3-1978 |
家用電扇.使用性能.要求 |
(Electric household fans; characteristics of performance, requirements) |
| DIN 44991-1979 |
家用器具的水管連接部件.R3/4型螺紋接頭.接頭尺寸 |
(Armatures for household appliances; thread connection R 3/4, dimensions of connection parts) |
| DIN 44992-1-1981 |
家用器具的水管連接部件.金屬鎖緊螺母.尺寸 |
(Armatures for household appliances; screw cap from metal; dimensions) |
| DIN 44993-1-1981 |
家用器具的水管連接部件.金屬進水軟管螺紋接套.尺寸 |
(Armatures for household appliances; hosenipples for water inlet pipe from metal; dimensions) |
| DIN 44993-2-1981 |
家用器具的水管連接部件.塑料進水軟管螺紋接套.尺寸.要求和檢驗 |
(Armatures for household appliances; hosenipples for water inlet pipe from plastics; dimensions, requirements and testing) |
| DIN 44994-1978 |
家用器具的水管連接部件.軟管螺紋接套墊圈.尺寸.要求和檢驗 |
(Armatures for household appliances; gaskets for hose taps, dimensions, requirements and test) |
| DIN 45020-1965 |
電訊技術.電波傳播專業的概念 |
(Propagation of waves; terms and definitions) |
| DIN 4503-1-1993 |
照相機及其附件用三角架連接件.螺絲連接件 |
(Tripod connections for cameras and accessories; screw connections) |
| DIN 4503-2-1993 |
照相機及其附件用三角架連接件.快速固定用連接件 |
(Tripod connections for cameras and accessories; connections for rapid assembly) |
| DIN 4510-1-1983 |
110.126和135號膠卷靜物攝影的圖象尺寸和印相遮片 |
(Picture sizes and printing masks for film No. 110, film No. 126 and film No. 135 for still photography) |
| DIN 4510-2-1992 |
120號和220號膠卷以及70mm膠片靜物攝影的圖象尺寸和照片復制框 |
(Picture sizes and printing masks for roll films No 120, No 220 and film 70 mm) |
| DIN 4510-3-1985 |
靜物攝影的圖象尺寸和印相遮片 |
(Picture sizes and printing masks for sheet films) |
| DIN 45105-4-1981 |
壓電石英測量方法.濾波器晶體附加諧振的頻率和諧振阻抗的測量 |
(Quartz crystal units; methods for the measurement of frequency and equivalent resistance of unwanted resonances of filter crystal units) |
| DIN 4512-10-1993 |
照相膠片感光度的測定.光密度的測定.反射測量的幾何條件 |
(Photographic sensitometry, determination of optical density; geometric conditions for reflection density) |
| DIN 4512-7-1993 |
照相膠片感光度的測定.光密度的測定.概念.符號.標志 |
(Photographic sensitometry, determination of optical density; concepts, symbols and notations) |
| DIN 4512-8-1993 |
照相膠片感光度的測定.光密度的測定.透射測量的幾何條件 |
(Photographic sensitometry, determination of optical density; geometric conditions for transmission density) |
| DIN 4512-9-1993 |
照相膠片感光度的測定.光密度的測定.光譜條件 |
(Photographic sensitometry, determination of optical density; spectral conditions) |
| DIN 4516-1989 |
卷式記錄裝置用感光紙 |
(Photosensitive papers in roll form for registration devices) |
| DIN 45174-1 Bb.1-1985 |
石英振蕩器.概念.說明 |
(Quartz crystal controlled oscillators; terms and definitions, explanations) |
| DIN 45174-1-1985 |
石英晶體振蕩器.概念 |
(Quartz crystal controlled oscillators; terms and definitions) |
| DIN 4518-1-1988 |
復制和縮微用感光材料.鹵化銀材料.尺寸 |
(Photosensitive materials for reprographic and micrographic use; dimensions; silver halide type) |
| DIN 4518-2-1988 |
復制和縮微用感光材料.重氮型材料.尺寸 |
(Photosensitive materials for reprographic and micrographic use; dimensions; diazo type) |
| DIN 4522-11-1991 |
照相機鏡頭.文字標記和優選值 |
(Photographic lenses; inscription and preferred values) |
| DIN 4522-3-1991 |
照相鏡頭.爆光的光圈數(e-數) |
(Photographic lenses; exposure stop (e-stop)) |
| DIN 4522-4-1993 |
照相機鏡頭.光譜透射系數的測量 |
(Photographic lenses; method for measuring the spectral transmittance) |
| DIN 4522-5-1991 |
照相機鏡頭.鏡頭對彩色還原的影響.術語和彩色再現指數 |
(Photographic lenses; their influence on colour rendition of colour films; terms, values for colour contribution index) |
| DIN 4522-6-1991 |
照相機鏡頭.鏡頭對彩色還原的影響.彩色再現指數的推薦值 |
(Photographic lenses; their influence on colour rendition of colour films; recommended values for colour contribution index) |
| DIN 4522-7-1991 |
照相機鏡頭.攝影鏡頭質量特性標志 |
(Photographic lenses; characterization of the quality of photographic lenses) |
| DIN 4526-1979 |
照相機卷膠片用的計數窗.位置和尺寸 |
(Back window location for roll film cameras) |
| DIN 4528-1-1984 |
110號盒式膠卷.110號盒式膠卷用的照相機暗盒.與照相機的連接尺寸 |
(Film No. 110; camera cartridge; connecting dimensions between camera cartridge and camera) |
| DIN 4528-2-1984 |
110號盒式膠卷.110號盒式膠卷用的照相機暗盒.膠卷感光度開關隔片和膠卷識別開關槽的尺寸和位置 |
(Film No. 110; camera cartridge; dimensions and location of the notches for film speed and film identification) |
| DIN 4528-3-1984 |
110號盒式膠卷.膠片和背紙 |
(Film No. 110; film and backing paper) |
| DIN 4531-1982 |
立體復制(立體圖象).公稱尺寸.外部尺寸.半幀.幀距.半幀位置.標志 |
(Stereoscopie (3D) photography; sizes of mounted pictures) |
| DIN 45313-1980 |
頻率范圍為0.1至1000MHZ的收音和電視接收天線設備的輸出值 |
(Output values of receiving antennas for broadcasting in the frequency range from 0,1 to 1000 MHz) |
| DIN 45323-1982 |
電池供電的無線電設備及其類似設備上連接外部電源的插接連接器 |
(Connectors for coupling an external low-voltage power to portable entertainment equipment) |
| DIN 45325-1-1987 |
連接無線電接收天線連接用同軸插接件.不匹配同軸插件.與IEC169-21965年版一致 |
(Coaxial connectors for receiving aerials; coaxial unmatched connector; identical with IEC 60169-2, edition 1965 (status as of 1982)) |
| DIN 45325-2-1983 |
連接無線電接收天線的同軸插接件.帶直的和角形電纜抽頭的插塞連接器 |
(Coaxial connectors for receiving aerials) |
| DIN 45325-3-1990 |
連接無線電接收天線用同軸插接件.75歐姆特性阻抗用插接連接器 |
(Coaxial connectors for receiving aerials; connectors for 75 Ohm surge impedance) |
| DIN 45330-1974 |
連接接收機的電纜的天線插孔.主要尺寸 |
(Antenna socket for cable for connecting receivers with aerials systems; principal dimensions) |
| DIN 45405-1983 |
聲學技術中的噪聲級測量 |
(Noise level measurement in sound systems) |
| DIN 45411-1976 |
放唱片時頻率交調.測試方法 |
(Frequency intermodulation of records; measuring methods) |
| DIN 4543-1-1994 |
辦公室工作場地.第1部分:辦公室設備的擺放和使用面積.安全技術要求.檢驗 |
(Office work place - Part 1: Space for the arrangement and use of office furniture; safety requirements, testing) |
| DIN 4544-1976 |
帶或不帶蓋卡片索引箱.卡片格式.卡片索引箱的間距 |
(Card cabinets with and without covers; card sizes, inside dimensions of card cabinets) |
| DIN 4545-1983 |
辦公室家具.帶底座的檔案柜和卡片柜.外形尺寸 |
(Office furniture; filing cabinets with socle; external dimensions) |
| DIN 4547-1973 |
鋼制衣柜 |
(Wardrobe of steel) |
| DIN 4548-1973 |
鋼制車間用柜子 |
(Workshop-chest of steel) |
| DIN 4550-1992 |
辦公室家具.帶和不帶扶手的辦公轉椅用帶蓄能器的自行支承的座位高度調節件 |
(Office furniture; self-supporting energized devices for the height adjustment of swivel chairs and armchairs; safety requirements and testing) |
| DIN 4550-2004 |
辦公家具.調節辦公座椅高度用自承重增能裝置.安全要求和檢驗 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com