標準號 |
中文名稱 |
英文名稱 |
| DIN ISO 5748-1994 |
夾扭鉗和剪扭鉗.端剪扭鉗.尺寸 |
(Pliers and nippers - End cutting nippers - Dimensions and test values; identical with ISO 5748:1988) |
| DIN ISO 5749-1994 |
夾扭鉗和剪扭鉗.斜剪鉗.尺寸.和試驗值 |
(Pliers and nippers - Diagonal cutting nippers - Dimensions and test values; identical with ISO 5749:1988) |
| DIN ISO 5754-1990 |
燒結金屬材料(不包括硬質合金).無切口沖擊試件 |
(Sintered metal materials, excluding hardmetalls; unnotched impact test piece; identical with ISO 5754:1978) |
| DIN ISO 5755-2002 |
熔結金屬材料的規范 |
(Sintered metal materials - Specifications (ISO 5755:2001)) |
| DIN ISO 5755-2004 |
燒結金屬材料.規范 |
|
| DIN ISO 5768-1998 |
電影技術.W型電影攝影機片窗在16mm電影膠片上所形成的影象.位置和尺寸 |
(Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions (ISO 5768:1996)) |
| DIN ISO 5779-1991 |
造船.普通矩形窗戶.窗位確定位置 |
(Shipbuilding; ordinary rectangular windows; positioning; identical with ISO 5779:1987) |
| DIN ISO 5780-1991 |
造船.側舷窗.窗位確定位置 |
(Shipbuilding; side scuttles; positioning; identical with ISO 5780:1987) |
| DIN ISO 5800-1998 |
攝影技術.靜物照相用彩色負片.ISO感光度的測定 |
(Photography - Colour negative films for still photography - Determination of ISO speed (ISO 5800:1987)) |
| DIN ISO 5809-1986 |
淀粉及其制品.硫酸化灰分的測定 |
(Starches and derived products; determination of sulphated ash; identical with ISO 5809, edition 1982) |
| DIN ISO 5810-1986 |
淀粉及其制品.氯化物含量的測定.電位滴定法 |
(Starches and derived products; determination of chloride content; potentiometric method; identical with ISO 5810, edition 1982) |
| DIN ISO 5816-1997 |
電子設備用的白云母件.規范 |
(Muscovite mica components for electronic equipment - Specifications (ISO 5816:1979)) |
| DIN ISO 5821-1984 |
電阻點焊電極帽接頭 |
(Resistance spot welding electrode caps) |
| DIN ISO 5826-2000 |
阻焊設備.變壓器.適用于所有變壓器的一般規范 |
(Resistance welding equipment - Tranformers - General specifications applicable to all transformers (ISO 5826:1999)) |
| DIN ISO 5827-1989 |
點焊.電極擋塊和夾緊裝置 |
(Spot welding; electrode back-up and clamps; identical with ISO 5827 1983 (status as of 1985)) |
| DIN ISO 5832-1-2000 |
外科植入物.金屬材料.第1部分:鍛制不銹鋼 |
(Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997)) |
| DIN ISO 5832-11-2001 |
外科植入物.金屬材料.第11部分:鍛造6鈦/7鋁/鈮合金 |
(Implants for surgery - Metallic materials - Part 11: Wrought titanium-6-aluminium 7-niobium alloy (ISO 5832-11:1994)) |
| DIN ISO 5832-12-2000 |
外科植入物.金屬材料.第12部分:鍛制鈷鉻鉬合金 |
(Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:1996)) |
| DIN ISO 5832-2-2000 |
外科植入物.金屬材料.第2部分:非合金鈦 |
(Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999)) |
| DIN ISO 5832-3-2000 |
外科植入物.金屬材料.第3部分:鈦6-鋁4-釩鍛造合金 |
(Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996)) |
| DIN ISO 5832-4-2000 |
外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金 |
(Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996)) |
| DIN ISO 5832-5-2001 |
外科植入物.金屬材料.第5部分:鍛造鈷/鉻/鎢/鎳合金 |
(Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993)) |
| DIN ISO 5832-6-2001 |
外科植入物.金屬材料.第6部分:煅制的鈷鎳鉻鉬合金 |
(Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997)) |
| DIN ISO 5832-7-2001 |
外科植入物.金屬材料.第7部分:可鍛的和冷加工的鈷鉻鎳鉬鐵合金 |
(Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994)) |
| DIN ISO 5832-8-2000 |
外科植入物.金屬材料.第8部分:鍛制鈷鎳鉻鉬鎢鐵合金 |
(Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997)) |
| DIN ISO 5832-9-2000 |
外科植入物.金屬材料.第9部分:鍛制高氮不銹鋼 |
(Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992)) |
| DIN ISO 5834-1-2000 |
外科植入物.超高分子量聚乙烯.第1部分:粉劑型 |
(Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form (ISO 5834-1:1998)) |
| DIN ISO 5834-2 Berichtigung 1-2004 |
DINISO5834-2-2000的技術勘誤 |
(Corrigenda to DIN ISO 5834-2:2000-08) |
| DIN ISO 5834-2 Berichtigung 1-2004 |
DIN ISO 5834-2-2000的技術勘誤 |
|
| DIN ISO 5834-2-2000 |
外科植入物.超高分子量聚乙烯.第2部分:模塑型 |
(Implants for surgery - Ultra-high molecular weight polyethylene - Part 2: Moulded forms (ISO 5834-2:1998)) |
| DIN ISO 5845-1-1997 |
技術制圖.組裝用緊固件的簡單表示法.第1部分:一般原理 |
(Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995)) |
| DIN ISO 5845-2-1997 |
技術制圖.組裝用緊固件的簡單表示法.第2部分:航空和航天設備用鉚釘 |
(Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment (ISO 5845-2:1995)) |
| DIN ISO 5855-1-1989 |
航空和航天..MJ螺紋.第1部分:一般要求 |
(Aerospace; MJ-threads; general requirements; identical with ISO 5855-1:1988) |
| DIN ISO 5855-2-1989 |
航空和航天..MJ螺紋.第2部分:螺栓和螺母的極限尺寸 |
(Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988) |
| DIN ISO 5855-3-1996 |
航空航天.MJ螺紋.第3部分:流體系統螺紋連接件的極限尺寸 |
(Aerospace - MJ threads - Part 3: Limit dimensions for fitting for fluid systems (ISO 5855-3:1988)) |
| DIN ISO 5884-1989 |
航空和航天.液壓系統和組件.液壓流體固體微粒污染的系統取樣和測量方法 |
(Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987) |
| DIN ISO 5902-1981 |
高山雪撬.彈性性能的測定 |
(Alpine skis; determination of the elastic properties) |
| DIN ISO 5912-1999 |
野營帳篷 |
(Camping tents (ISO 5912:1993 + Amendment 1:1998)) |
| DIN ISO 5912-2004 |
野營帳篷 |
|
| DIN ISO 5956-1986 |
銅和銅合金.銻含量的測定.若丹明B(RhodamineB)光譜測定法 |
(Copper and copper alloys; determination of antimony content; Rhodamine B spectrophotometric method; identical with ISO 5956, edition 1984) |
| DIN ISO 5972-1997 |
云母塊,薄片,薄膜和劈裂疊層.厚度的測定 |
(Mica blocks, thins, films and splittings - Measurement of thickness (ISO 5972:1978)) |
| DIN ISO 5989-1998 |
攝影學.攝影銀鹵化材料加工用預分裝的化合物.詞匯 |
(Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary (ISO 5989:1995)) |
| DIN ISO 6-1996 |
攝影技術.黑白照相機負片/沖洗系統.ISO感光速度測定 |
(Photography - Black-and-white pictorial still camera negative film/process systems - Determination of ISO speed (ISO 6:1993)) |
| DIN ISO 6003-1985 |
高山雪撬.雪撬質量和慣性極力矩的測定.實驗室測量法 |
(Alpine skis; determination of mass and polar moment of inertia; laboratory measurement method) |
| DIN ISO 6004-1995 |
高山雪撬.雪撬緊固螺釘.要求 |
(Alpine skis - Ski bindings screws - Requirements; identical with ISO 6004:1991) |
| DIN ISO 6005-1995 |
高山雪撬.雪撬緊固螺釘.檢驗方法 |
(Alpine skis - Ski bindings screws - Test methods; identical with ISO 6005:1991) |
| DIN ISO 6020-1-2001 |
液力傳動.16MPa(160bar)系列單桿液壓缸裝配尺寸.第1部分:中型系列 |
(Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998)) |
| DIN ISO 6025-2003 |
電影技術.35mm和16mm模擬攝影聲音試驗?zāi)z片.規范 |
(Cinematography - Analogue photographic sound test films, 35 mm and 16 mm - Specifications (ISO 6025:2000)) |
| DIN ISO 603-1-2000 |
粘合磨料產品.尺寸.第1部分:中心之間外圓柱形磨床用砂輪 |
(Bonded abrasives products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres (ISO 603-1:1999)) |
| DIN ISO 603-10-2000 |
粘合磨料產品.尺寸.第10部分:搪磨和超級研磨用磨石 |
(Bonded abrasives products - Dimensions - Part 10: Stones for honing and superfinishings (ISO 603-10:1999)) |
| DIN ISO 603-11-2000 |
粘合磨料產品.尺寸.第11部分:手工精整油石 |
(Bonded abrasives products - Dimensions - Part 11: Hand finishing sticks (ISO 603-11:1999)) |
| DIN ISO 603-12-2000 |
粘合磨料產品.尺寸.第12部分:在直磨床上清除毛刺和修整用砂輪 |
(Bonded abrasives products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder (ISO 603-12:1999)) |
| DIN ISO 603-13-2000 |
粘合磨料產品.尺寸.第12部分:在立式磨床上清除毛刺和修整用砂輪 |
(Bonded abrasives products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder (ISO 603-13:1999)) |
| DIN ISO 603-14-2000 |
粘合磨料產品.尺寸.第12部分:在有角度磨床上清除毛刺和修整用砂輪 |
(Bonded abrasives products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (ISO 603-14:1999)) |
| DIN ISO 603-15-2000 |
粘合磨料產品.尺寸.第15部分:固定或移動切斷機上切割用砂輪 |
(Bonded abrasives products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines (ISO 603-15:1999)) |
| DIN ISO 603-16-2000 |
粘合磨料產品.尺寸.第16部分:手持動力工具上切割用砂輪 |
(Bonded abrasives products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools (ISO 603-16:1999)) |
| DIN ISO 603-2-2000 |
粘合磨料產品.尺寸.第2部分:非中心外圓磨床用砂輪 |
(Bonded abrasives products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding (ISO 603-2:1999)) |
| DIN ISO 603-3-2000 |
粘合磨料產品.尺寸.第3部分:內圓磨床用砂輪 |
(Bonded abrasives products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding (ISO 603-3:1999)) |
| DIN ISO 603-4-2000 |
粘合磨料產品.尺寸.第4部分:表面磨削/圓周磨削用砂輪 |
(Bonded abrasives products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding (ISO 603-4:1999)) |
| DIN ISO 603-5-2000 |
粘合磨料產品.尺寸.第5部分:表面磨削/平面磨削用砂輪 |
(Bonded abrasives products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding (ISO 603-5:1999)) |
| DIN ISO 603-6-2000 |
粘合磨料產品.尺寸.第6部分:工具和工具室磨削用砂輪 |
(Bonded abrasives products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding (ISO 603-6:1999)) |
| DIN ISO 603-7-2000 |
粘合磨料產品.尺寸.第7部分:手工磨削用砂輪 |
(Bonded abrasives products - Dimensions - Part 7: Grinding wheels for manually guided grinding (ISO 603-7:1999)) |
| DIN ISO 603-8-2000 |
粘合磨料產品.尺寸.第8部分:清除毛刺和修整/打磨用砂輪 |
(Bonded abrasives products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging (ISO 603-8:1999)) |
| DIN ISO 603-9-2000 |
粘合磨料產品.尺寸.第9部分:高壓磨削用砂輪 |
(Bonded abrasives products - Dimensions - Part 9: Grinding wheels for high-pressure grinding (ISO 603-9:1999)) |
| DIN ISO 6043-1986 |
造船.受拉伸載荷的叉和眼結構總成.主要尺寸 |
(Shipbuilding; eye and fork assemblies under tension load; main dimensions; identical with ISO 6043, edition 1985) |
| DIN ISO 6044-1986 |
造船.懸臂起重機吊桿底腳裝置.主要尺寸 |
(Shipbuilding; fork-type heel fittings for ships` derrick booms; main dimensions; identical with ISO 6044, edition 1985) |
| DIN ISO 6045-1988 |
造船.懸臂起重機鵝頸件軸承.總成和件 |
(Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987) |
| DIN ISO 6051-1996 |
攝影技術.已沖洗的照片.貯存條件 |
(Photography - Processed photographic paper prints - Storage practices (ISO 6051:1992)) |
| DIN ISO 607-1985 |
表面活性劑和洗滌劑.樣品分割法 |
(Surface active agents and detergents; methods of sample division; identical with ISO 607, edition 1980) |
| DIN ISO 6104-2005 |
超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語 |
|
| DIN ISO 6105-1-2005 |
超級研磨切割砂輪用坯件.第1部分:建筑物和土木工程用人工切割 |
|
| DIN ISO 6105-2-2005 |
超級研磨切割砂輪用坯件.第2部分:建筑物和土木工程用手持式切割 |
|
| DIN ISO 611-1997 |
道路車輛.機動車及其掛車的制動.詞匯 |
(Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary (ISO 611:1994)) |
| DIN ISO 6115-1989 |
造船.拖網絞車 |
(Shipbuilding; trawl winches; identical with ISO 6115:1988) |
| DIN ISO 6121-1981 |
表面活性劑.工業用烷基磺酸鹽.烷基單磺酸鹽含量的測定(兩相直接滴定法) |
(Surface active agents, technical alkyl-sulphonates, determination of alkyl-monosulphonates content (direct twophase titration method)) |
| DIN ISO 6122-1982 |
表面活性劑.工業用鏈烷磺酸鹽.鏈烷磺酸鹽總含量的測定 |
(Surface active agents; technical alkane sulfonates; determination of total alkane sulfonates content) |
| DIN ISO 6133-2004 |
橡膠和塑料.測定撕裂強度和粘合強度所獲得的多峰圖形的分析 |
|
| DIN ISO 6141-2004 |
氣體分析.標定氣體和混合氣體的合格證書要求 |
|
| DIN ISO 6142-1985 |
氣體分析.校正用混合氣體的制備.稱重法 |
(Gas analysis - Preparation of calibration gas mixtures - Weighing methods) |
| DIN ISO 6143-1985 |
氣體分析.標定用混合氣體成分的測定.比較方法 |
(Gas analysis; determination of composition of calibration gas mixtures; comparison methods) |
| DIN ISO 6143-2004 |
氣體分析.測定并檢查標定用混合氣體成分的比較方法 |
|
| DIN ISO 6144-1985 |
氣體分析.標定用混合氣體的制備.靜態容量法 |
(Gas analysis; preparation of calibration gas mixtures; static volumetric methods) |
| DIN ISO 6146-1983 |
氣體分析.標定用混合氣體的制備.測壓法 |
(Gas analysis; preparation of calibration gas mixtures; manometric method) |
| DIN ISO 6149-1-1996 |
液壓傳動的連接和一般應用.油口和具有ISO261螺紋和O型環密封的螺柱端頭.第1部分:載頭殼體內具有O形環的油口 |
(Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)) |
| DIN ISO 6149-2-1996 |
油口和具有ISO261螺紋和O型環密封的螺柱端頭.第2部分:重載(S系列)螺柱端頭.尺寸、設計、試驗方法和要求 |
(Ports and stud ends with ISO 261 threads and O-ring sealing - Part 2: Heavy duty (S series) stud ends - Dimensions, design, test methods and requirements (ISO 6149-2:1993)) |
| DIN ISO 6149-3-1996 |
液壓傳動的連接和一般應用.油口和具有ISO261螺紋和O型環密封的螺柱端頭.第3部分:輕載(L系列)螺柱端頭.尺寸 |
(Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)) |
| DIN ISO 6169-1985 |
紡織機械和輔助裝置.并紗和捻紗的凸緣筒子 |
(Textile machinery and accessories; flanged bobbins for doubling and twisting; identical with ISO 6169, edition 1982) |
| DIN ISO 6170-2001 |
紡紗機.粗梳機用搓條橡膠 |
(Spinning machinery - Condenser rubbers for cards (ISO 6170:1999)) |
| DIN ISO 6171-1985 |
紡織機械和輔助裝置.梳理機的珠形金屬絲和相應的槽.主要型式和尺寸 |
(Textile machinery and accessories; bead wires and corresponding grooves for cards; main types and dimensions; identical with ISO 617, edition 1982) |
| DIN ISO 6173-1983 |
紡織機械和輔助裝置.自由端紡紗機.術語 |
(Open-end spinning machines; vocabulary) |
| DIN ISO 6176-1996 |
紡織機械.經紗上漿機.最大有效寬度 |
(Textile machinery - Warp sizing machines - Maximum usable width (ISO 6176:1994)) |
| DIN ISO 6177-1988 |
紡織機械.卷布輥.術語和主要尺寸 |
(Textile machinery; cloth rollers; terminology and main dimensions; identical with ISO 6177, edition 1986) |
| DIN ISO 6195-1989 |
液壓系統和組件.液壓缸.往復作用的刮垢環罩.尺寸和公差 |
(Fluid power systems and components; cylinders; housings for rod wiper rings in reciprocating applications; dimensions and tolerances; identical with ISO 6195:1986) |
| DIN ISO 6199-1995 |
縮微攝影技術.在16mm和35mm銀膠凝型縮微膠卷上的文件縮微攝影.操作規程 |
(Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures; identical with ISO 6199:1991) |
| DIN ISO 6218-1982 |
造船.內河航行.推進式駁船的連接用絞車.主要尺寸 |
(Shipbuilding; inland navigation; coupling winches for push tows, main dimensions) |
| DIN ISO 6234-1982 |
銀行業務.認可印鑒冊及其縮微膠片的顯示 |
(Bank operations; authorized signature lists and their representation on microfiche) |
| DIN ISO 6265-1995 |
高山雪撬.變形載荷和斷裂載荷的測定 |
(Alpine skis - Determination of deformation load and breaking load; identical with ISO 6265:1992) |
| DIN ISO 6266-1981 |
高山雪撬.疲勞指數的測定.周期性載荷試驗 |
(Alpine skis; determination of fatigue indexes; cyclic loading test) |
| DIN ISO 6267-1980 |
高山雪撬.彎曲振動的測量 |
(Alpine skis; measurement of bending vibrations) |
| DIN ISO 6271-1999 |
透明液體.用鉑鈷標度評定顏色等級 |
(Clear liquids - Estimation of colour by the platinum-cobalt scale (ISO 6271:1997)) |
| DIN ISO 6279-1979 |
滑動軸承.整體軸承用鋁合金 |
(Plain Bearings; Aluminium Alloy for Solid Bearings) |
| DIN ISO 6280-1982 |
滑動軸承.薄壁多層軸承軸瓦的要求 |
(Plain bearings; requirements on backings for thick-walled multilayer plain bearings) |
| DIN ISO 6282-1985 |
滑動軸承.金屬薄壁軸瓦.δ0.01極限值的測定 |
(Plain bearings; metallic thin-walled half bearings; determination of the -limit; identical with ISO 6282, edition 1983) |
| DIN ISO 6284-1997 |
技術圖紙.建筑用圖紙.極限尺寸標注 |
(Construction drawings - Indication of limit deviations (ISO 6284:1996)) |
| DIN ISO 6289-2004 |
滑雪板.詞匯 |
(Skis - Vocabulary (ISO 6289:2003)) |
| DIN ISO 6289-2004 |
滑雪板.詞匯 |
|
| DIN ISO 6313-1981 |
道路車輛.制動閘襯.圓形制動墊片尺寸和形狀的熱效應.試驗程序 |
(Road vehicles; brake linings; effects of heat on dimensions and form of disc brake pads; test procedure) |
| DIN ISO 6315-1981 |
道路車輛.閘襯.腐蝕對襯片與鐵質結合面的膠接.試驗程序 |
(Road vehicles; brake linings; seizure to ferrous mating surface due to corrosion; test procedure) |
| DIN ISO 6318-1987 |
圓度測量.圓度的術語.定義和參數 |
(Measurement of roundness; terms, definitions and parameters of roundness; identical with ISO 6318, edition 1985) |
| DIN ISO 6344-1-2000 |
涂層磨料.粒度分析.第1部分:粒度分布試驗 |
(Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)) |
| DIN ISO 6344-2-2000 |
涂層磨料.粒度分析.第2部分:肉眼可見磨料為P12至P220的粒度分布測定 |
(Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998)) |
| DIN ISO 6344-3-2000 |
涂層磨料.粒度分析.第3部分:微粒磨料為P240至P2500的粒度分布測定 |
(Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)) |
| DIN ISO 6345-1994 |
造船和船舶結構.窗和側舷窗.詞匯 |
(Shipbuilding and marine structures; windows and side scuttles; vocabulary; identical with ISO 6345:1990) |
| DIN ISO 6370-1-1995 |
釉瓷和搪瓷.耐磨性測定.第1部分:耐磨試驗器械 |
(Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus; identical with ISO 6370-1:1991) |
| DIN ISO 6370-2-1995 |
釉瓷和搪瓷.耐磨性測定.第2部分:表層耐磨后質量的損失 |
(Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion; identical with ISO 6370-2:1991) |
| DIN ISO 6386-1997 |
白云母的劈裂片.定級和目視分類 |
(Muscovite mica splittings - Grading and visual classification (ISO 6386:1981)) |
| DIN ISO 6388-1989 |
表面活性劑.使用旋轉粘度計測定流動特性 |
(Surface active agents - Determination of flow properties using a rotational viscosimeter; Identical with ISO 6388:1983) |
| DIN ISO 6393-1989 |
聲學.土方機械發出的氣載噪聲測量.符合室外噪聲限制的測定方法.靜態試驗條件 |
(Measurement of airborne noise emitted by machines; enveloping surface method; earth-moving machinery (stationary test condition); identical with ISO 6393:1985) |
| DIN ISO 6394-1989 |
聲學.土方機械發出的氣載的噪聲測量.操作者位置.靜態試驗條件 |
(Measurement of airborne noise emitted by machines; measurement at the operator`s position; earth-moving machinery (stationary test condition); identical with ISO 6394:1985) |
| DIN ISO 6410-1-1993 |
技術制圖.螺紋和螺紋部件.通則 |
(Technical drawings; screw threads and threaded parts; general conventions; identical with ISO 6410-1:1993) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com