標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 15902-2005 |
光學和光子學.衍射光學.詞匯 |
|
| DIN EN ISO 15902-2005 |
光學和光子學.衍射光學.詞匯 |
|
| DIN EN ISO 15908-2003 |
塑料管系統粘合劑.測定粘合劑熱穩定性的試驗發方法 |
(Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002) |
| DIN EN ISO 15913-2003 |
水質.固相萃取和衍生作用后用氣相色譜法和質譜法測定包括苯達松和羥基苯甲腈在內的選定的苯氧基鏈烷除莠劑 |
(Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000); German version EN ISO 15913: |
| DIN EN ISO 15914-2005 |
動物飼料.淀粉總含量的酶催化測定 |
|
| DIN EN ISO 15914-2005 |
動物飼料.淀粉總含量的酶催化測定 |
|
| DIN EN ISO 15914-2005 |
動物飼料.淀粉總含量的酶催化測定 |
|
| DIN EN ISO 15927-1-2004 |
建筑物的濕熱性能.氣象數據的計算與顯示.第1部分:單一氣象素的月均值和年均值 |
(Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003); German version EN ISO 15927-1:2003) |
| DIN EN ISO 15927-1-2004 |
建筑物的濕熱性能.氣象數據的計算與顯示.第1部分:單一氣象素的月均值和年均值 |
|
| DIN EN ISO 15927-4-2005 |
建筑物的溫濕性能.氣候數據的計算和表示.第4部分:取暖和制冷年使用能量評定用小時數據 |
|
| DIN EN ISO 1597-1999 |
塑料.未增塑的醋酸纖維素.醋酸含量的測定 |
(Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield (ISO 1597:1994); German version EN ISO 1597:1999) |
| DIN EN ISO 15973-2001 |
帶斷點牽引心軸和突出頭的封口式空心單面壓裝鉚釘.AlA/St |
(Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); German version EN ISO 15973:2000) |
| DIN EN ISO 15974-2001 |
帶斷點牽引心軸和埋頭的封口式空心單面壓裝鉚釘.AlA/St |
(Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000) |
| DIN EN ISO 15975-2003 |
封閉型盤頭抽芯盲鉚釘.AI/AIA |
(Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002) |
| DIN EN ISO 15976-2003 |
封閉型盤頭抽芯盲鉚釘.St/St |
(Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002) |
| DIN EN ISO 15977-2003 |
開口型盤頭抽芯盲鉚釘.AIA/St |
(Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002) |
| DIN EN ISO 15978-2003 |
開口型沉頭抽芯盲鉚釘.AIA/St |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002) |
| DIN EN ISO 15979-2003 |
開口型盤頭抽芯盲鉚釘.St/St |
(Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002) |
| DIN EN ISO 1598-1999 |
塑料.醋酸纖維素.不可溶解成份的測定 |
(Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999) |
| DIN EN ISO 15980-2003 |
開口型沉頭抽芯盲鉚釘.St/St |
(Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002) |
| DIN EN ISO 15981-2003 |
開口型盤頭抽芯盲鉚釘.AIA/AIA |
(Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002) |
| DIN EN ISO 15982-2003 |
開口型沉頭抽芯盲鉚釘.AIA/AIA |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002) |
| DIN EN ISO 15983-2003 |
開口型盤頭抽芯盲鉚釘.A2/A2 |
(Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002) |
| DIN EN ISO 15984-2003 |
開口型沉頭抽芯盲鉚釘.A2/A2 |
(Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002) |
| DIN EN ISO 1599-2000 |
塑料.乙酸纖維素.模制時粘度損耗的測定 |
(Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999) |
| DIN EN ISO 1600-2000 |
塑料.醋酸纖維素.利用加熱的不同時期在模制試樣生產中的光吸收量的測定 |
(Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999) |
| DIN EN ISO 16017-1-2001 |
室內空氣、環境空氣和工作場所空氣.用吸附管/熱解吸/毛細管氣相色譜法對揮發性有機化合物進行分析和取樣.第 |
(Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000) |
| DIN EN ISO 16021-2001 |
吸尿輔助器.從使用者和護理者的角度評價一次性使用的成人不能自制的輔助器的基本原則 |
(Urine absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000); German version EN ISO 16021:2000) |
| DIN EN ISO 16032-2004 |
聲學.建筑物服務設備的聲壓級測量.工程法 |
|
| DIN EN ISO 16032-2004 |
聲學.建筑物服務設備的聲壓級測量.工程法 |
|
| DIN EN ISO 16035-2005 |
動物和植物脂肪和油.食用油中低沸點鹵代烴的測定 |
|
| DIN EN ISO 16047-2005 |
緊固件.扭矩/夾持力試驗 |
|
| DIN EN ISO 16048-2003 |
耐腐蝕不銹鋼緊固件的鈍化 |
(Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003) |
| DIN EN ISO 16054-2002 |
外科植入物.外科植入物的最小數據集 |
(Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000); German version EN ISO 16054:2002) |
| DIN EN ISO 16070-2002 |
石油和天然氣工業.井下鉆具.閉鎖心軸和落地短接管 |
(Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001); German version EN ISO 16070:2001 (German and English text)) |
| DIN EN ISO 16101-2004 |
包裝.危險貨物的運輸包裝.塑料的兼容性試驗 |
|
| DIN EN ISO 16103-2005 |
包裝.危險物品的運輸包裝.再循環的塑料 |
|
| DIN EN ISO 16147-2003 |
小艇.艇內柴油發動機.裝在發動機上的燃料和電氣件 |
(Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002); German version EN ISO 16147:2002) |
| DIN EN ISO 1622-1-1999 |
塑料.聚苯乙烯(PS)模塑與注塑材料.第1部分:命名與基礎規范 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994); German version EN ISO 1622-1:1999) |
| DIN EN ISO 1622-2-1999 |
塑料.聚苯乙烯(PS)模塑與擠塑材料.第2部分:試樣制備與特性測定 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999) |
| DIN EN ISO 1624-2002 |
塑料.氯乙烯均聚物和共聚物樹脂.水濾篩析 |
(Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001); German version EN ISO 1624:2001) |
| DIN EN ISO 16264-2004 |
水質.用流動分析(FIA和CFA)法和光度檢測法測定可溶性硅酸鹽 |
|
| DIN EN ISO 1628-1-1998 |
塑料.用毛細管粘度計測定稀釋溶液中聚合物的粘度.第1部分:一般原理 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998); German version EN ISO 1628-1:1998) |
| DIN EN ISO 1628-2-1999 |
塑料.用毛細管粘度計測定稀釋溶液中聚合物的粘度.第2部分:聚氯乙烯樹脂 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998) |
| DIN EN ISO 1628-3-1999 |
塑料.粘度值和極限粘度值的測定.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity number and limiting viscosity number - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:1991, including Technical Corrigendum 1:1992); German version EN ISO 1628-3:1999) |
| DIN EN ISO 1628-3-2003 |
塑料.用毛細管粘度計測定稀溶液中聚合物的粘度.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2001); German version EN ISO 1628-3:2003) |
| DIN EN ISO 16284-2001 |
眼科光學.眼科光學設備的信息交換 |
(Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001); German version EN ISO 16284:2001) |
| DIN EN ISO 16330-2004 |
往復運動變?nèi)菡婵毡煤捅醚b置.技術要求 |
|
| DIN EN ISO 16408-2004 |
牙科學.口腔衛生產品.口腔清洗 |
|
| DIN EN ISO 16426-2003 |
緊固件.質量保證體系 |
(Fasteners - Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002) |
| DIN EN ISO 16484-2-2004 |
建筑物自動化和控制系統.第2部分:硬件 |
|
| DIN EN ISO 16484-3-2005 |
建筑自動化和控制系統(BACS).第3部分:功能 |
|
| DIN EN ISO 16484-5-2004 |
建筑物自動化和控制系統.第5部分:數據通信協議 |
|
| DIN EN ISO 16582-2003 |
開口型盤頭抽芯盲鉚釘.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002) |
| DIN EN ISO 16583-2003 |
開口型沉頭抽芯盲鉚釘.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002) |
| DIN EN ISO 16584-2003 |
開口型盤頭抽芯盲鉚釘.NiCu/St或NiCu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002) |
| DIN EN ISO 16585-2003 |
封閉型盤頭抽芯盲鉚釘.A2/SSt |
(Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002) |
| DIN EN ISO 16588-2004 |
水質.六絡合反應物的測定.氣相色譜法 |
(Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002); German version EN ISO 16588:2003) |
| DIN EN ISO 16588-2004 |
水質.六絡合反應物的測定.氣相色譜法 |
|
| DIN EN ISO 16654-2001 |
食品和動物飼料的微生物學.大腸桿菌O157檢測的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001); German version EN ISO 16654:2001) |
| DIN EN ISO 1666-1998 |
淀粉.水含量的測定.烘箱干燥法 |
(Starch - Determination of moisture content - Oven-drying method (ISO 1666:1996); German version EN ISO 1666:1997) |
| DIN EN ISO 16663-2-2003 |
捕魚網.網眼尺寸測定的試驗方法.第2部分:網眼長度 |
(Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2002); German version EN ISO 16663-2:2003) |
| DIN EN ISO 16671-2004 |
眼科植入物.眼科手術用沖洗液 |
|
| DIN EN ISO 16672-2003 |
外科植入物.眼內填塞 |
(Ophthalmic implants - Ocular endotamponades (ISO 16672:2003); German version EN ISO 16672:2003) |
| DIN EN ISO 16744-2004 |
牙科學.固定的牙齒修復用基本金屬材料 |
|
| DIN EN ISO 1675-1998 |
塑料.液態樹脂.用比重計法測定濃度 |
(Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998) |
| DIN EN ISO 1680-2000 |
聲學.測量旋轉電機排放的空氣噪聲的試驗規范 |
(Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999) |
| DIN EN ISO 16812-2005 |
石油和天然氣工業.殼管式熱交換器 |
|
| DIN EN ISO 16812-2005 |
石油和天然氣工業.殼管式熱交換器 |
|
| DIN EN ISO 16931-2002 |
動植物脂肪和油.高效尺寸篩析色譜法(HPSEC)測定聚合甘油三酸酯含量 |
(Animal and vegetable fats and oils - Determination of polymerized triglyceride content by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001); German version EN ISO 16931:2001) |
| DIN EN ISO 1716-2002 |
建筑產品對火焰試驗的反應.燃燒熱的測定 |
(Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002); German version EN ISO 1716:2002) |
| DIN EN ISO 17189-2004 |
黃油、可食用油乳劑和可涂脂肪.脂肪含量的測定(參照法) |
(Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003); German version EN ISO 17189:2003) |
| DIN EN ISO 17189-2004 |
黃油、可食用油乳劑和可涂脂肪.脂肪含量的測定(參照法) |
|
| DIN EN ISO 172-1998 |
塑料.酚醛塑料模制件.游離氨的檢測 |
(Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998) |
| DIN EN ISO 17201-1-2005 |
聲學.射程內噪聲.第1部分:槍口炸震的測定 |
|
| DIN EN ISO 17249-2004 |
防止鏈鋸切割的安全鞋靴 |
|
| DIN EN ISO 17292-2004 |
石油、石油化學和相關工業用金屬球閥 |
|
| DIN EN ISO 17294-2-2005 |
水質.感應耦合等離子體質譜法(ICP-MS)的應用.第2部分:62種素的測定 |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量測定.重量分析法(參照法) |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量測定.重量分析法(參照法) |
|
| DIN EN ISO 17353-2005 |
水質.選定的有機化合物的測定.氣體色譜法 |
|
| DIN EN ISO 1736-2000 |
奶粉和奶粉制品.脂肪含量的測定.重量分析法(參照法) |
(Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000); German version EN ISO 1736:2000) |
| DIN EN ISO 1737-2000 |
淡煉乳和甜煉乳.脂肪含量的測定.重量法(參照法) |
(Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999); German version EN ISO 1737:1999) |
| DIN EN ISO 1741-1994 |
葡萄糖.干燥后質量損失的測定.真空烘箱法 |
(Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980); German version EN ISO 1741:1994) |
| DIN EN ISO 1746-2000 |
橡膠或塑料軟管和管道.彎曲試驗 |
(Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000) |
| DIN EN ISO 17495-2003 |
水質.選定的硝基本酚的測定.固相萃取法和帶有質量光譜探測的氣相色譜法 |
(Water quality - Determination of selected nitrophenols - Method by solid phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001); German version EN ISO 17495:2003) |
| DIN EN ISO 175-2000 |
塑料.浸入液體化學藥品的影響測定的試驗方法 |
(Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); German version EN ISO 175:2000) |
| DIN EN ISO 17510-1-2002 |
睡眠窒息呼吸治療.第1部分:睡眠窒息呼吸治療設備 |
(Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy devices (ISO 17510-1:2002); German version EN ISO 17510-1:2002) |
| DIN EN ISO 17510-2-2003 |
睡眠窒息呼吸治療.第2部分:面具和使用附件 |
(Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2003); German version EN ISO 17510-2:2003) |
| DIN EN ISO 176-1999 |
塑料.增塑劑損耗的測定.活性碳法 |
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:1976); German version EN ISO 176:1999 |
| DIN EN ISO 176-2005 |
塑料.增塑劑損耗的測定.活性碳法 |
|
| DIN EN ISO 17641-1-2004 |
金屬材料焊接的有損檢驗.焊件的熱裂試驗.弧焊過程.第1部分:通則 |
|
| DIN EN ISO 17642-1-2004 |
金屬材料的焊接的有損試驗.焊件的冷裂試驗.弧焊過程.第1部分:通則 |
|
| DIN EN ISO 17652-1-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第1部分:一般要求 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003); German version EN ISO 17652-1:2003) |
| DIN EN ISO 17652-2-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第2部分:工廠底漆的焊接性能 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003); German version EN ISO 17652-2:2003) |
| DIN EN ISO 17652-3-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第3部分:熱切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003) |
| DIN EN ISO 17652-4-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第4部分:焊接煙塵和氣體的排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003) |
| DIN EN ISO 17653-2003 |
金屬材料焊縫的破壞檢驗.電阻點焊的扭轉試驗 |
Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003 |
| DIN EN ISO 17654-2003 |
金屬材料焊縫的破壞檢驗.電阻焊接.電阻縫焊的壓力試驗 |
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
| DIN EN ISO 17655-2003 |
金屬材料焊縫的破壞檢驗.δ鐵素體測量用樣品的準備方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003 |
| DIN EN ISO 17664-2004 |
醫療設備的消毒.由生產商提供的可再消毒醫療設備的處理過程的信息 |
|
| DIN EN ISO 17693-2005 |
鞋靴.鞋幫的試驗方法.耐磨損性 (ISO 17693-2004); 德文版本 EN ISO 17693-2005 |
|
| DIN EN ISO 17695-2005 |
鞋靴.鞋幫試驗方法.變形性(ISO 17695-2004); 德文版本 EN ISO 17695-2005 |
|
| DIN EN ISO 177-1999 |
塑料.增塑劑擴散的測定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999 |
| DIN EN ISO 17700-2005 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐摩擦色牢度 |
|
| DIN EN ISO 17707-2005 |
鞋靴.外底試驗方法.耐彎性 |
|
| DIN EN ISO 178-1997 |
塑料.彎曲性能測定 |
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 |
| DIN EN ISO 178-2003 |
塑料.彎曲性能測定 |
(Plastics - Determination of flexural properties (ISO 178:2001); German version EN ISO 178:2003) |
| DIN EN ISO 17834-2004 |
熱噴鍍.防高溫腐蝕和氧化的涂層 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003) |
| DIN EN ISO 17834-2004 |
熱噴鍍.防高溫腐蝕和氧化的涂層 |
|
| DIN EN ISO 17836-2005 |
熱噴涂.熱噴涂熔敷效率的測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 179-1-2001 |
塑料.擺式?jīng)_擊特性測定.第1部分:非儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000 |
| DIN EN ISO 179-2-2000 |
塑料.擺錘式?jīng)_擊特性的測定.第2部分:儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
| DIN EN ISO 1797-1-1999 |
牙科用旋轉器具.柄.第1部分:金屬柄 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
| DIN EN ISO 1797-2-1995 |
牙科用旋轉器具.柄.第2部分:塑料柄 |
Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
| DIN EN ISO 1798-2000 |
柔性泡沫聚合材料.抗拉強度和斷裂時延伸率的測定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997); German version EN ISO 1798:1999 |
| DIN EN ISO 17993-2004 |
水質.用液-液萃取后的熒光探測高效液相色譜法(HPLC)測定水中的15環芳香烴(PAH) |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com