標準號 |
中文名稱 |
英文名稱 |
| DIN 21914-1-1994 |
礦山測量平面圖.鉆孔和孔洞.第1部分:鉆孔 |
(Mine plans - Drilling and cavern - Part 1: Drilling) |
| DIN 21914-1-2005 |
礦區平面圖.鉆探和孔洞.第1部分:鉆探 |
|
| DIN 21914-2-1999 |
礦山測量平面圖.鉆孔和孔洞.第1部分:鉆孔 |
(Mine plans - Drilling and cavern - Part 2: Brine caverns) |
| DIN 21916-1-1993 |
礦山測量平面圖.作業安全性.礦井通風 |
(Mine plans; operational safety; ventilation system) |
| DIN 21916-2-1992 |
礦山測量平面圖.作業安全性.地面防火 |
(Mine plans; operational safety; fire prevention on the surface) |
| DIN 21916-2/A1-2001 |
礦山測量平面圖.作業安全性.第2部分:地面防火.修改件A1 |
(Mine plans - Operational safety - Part 2: Fire prevention on the surface; Amendment A1) |
| DIN 21916-3-1993 |
礦山測量平面圖.作業安全性.井下防火 |
(Mine plans; operational safety; fire prevention under the surface) |
| DIN 21917-1999 |
礦山測量平面圖.地層和地面運動 |
(Mine plans - Strata and ground movements) |
| DIN 21917-2-2002 |
礦山測量平面圖.地層和地面運動.第2部分:地球力學測量點 |
(Mine plans - Strata and ground movements - Part 2: Geomechanical measuring points) |
| DIN 21918-1-1999 |
礦山.測量平面圖.礦層.第1部分:概念,劃分 |
(Mine plans - Mineral deposits - Part 1: Terms, classification) |
| DIN 21918-2-2004 |
礦山測量平面圖.礦床.第2部分:厚度 |
|
| DIN 21919-1-2000 |
礦山平面圖.地層學.第1部分:總分類 |
(Mine plans - Stratigraphy - Teil 1: General classification) |
| DIN 21919-2-2000 |
礦山平面圖.地層學.第2部分:區域和局部的劃分.無煙煤 |
(Mine plans - Stratigraphy - Part 2: Regional and local subdivisions; hard coal) |
| DIN 21919-3-2001 |
礦山測量平面圖.第3部分:區域和地區分級.褐煤 |
Mine plans - Stratigraphy - Part 3: Regional and local subdivisions; Lignite |
| DIN 21920-1-1988 |
礦山測量平面圖.巖相學.一般通用的符號.沉積物 |
(Mine plans; petrography; generally applicable symbols; sediments) |
| DIN 21920-2-1996 |
礦山測量平面圖.巖相學.第2部分:巖漿巖 |
Mine plans - Petrography - Part 2: Magmatites |
| DIN 21920-3-1996 |
礦山測量平面圖.巖相學.第3部分:巖石變質和其它巖石變化. |
Mine plans - Petrography - Part 3: Metamorphic and other lithogenetic phenomena |
| DIN 21920-4-1996 |
礦山測量平面圖.巖相學.第4部分:礦物 |
Mine plans - Petrography - Part 4: Minerals |
| DIN 21920-5-1994 |
礦山測量平面圖.巖相學.第5部分:煤礦 |
Mine plans - Petrography - Part 5: Hard coal mining |
| DIN 21920-7-1996 |
礦山測量平面圖.巖相學.第7部分:鉀鹽礦和巖鹽礦 |
Mine plans - Petrography - Part 7: Potash and rock salt mining |
| DIN 21921-1996 |
礦山測量平面圖.巖層的構造要素和形狀說明 |
Mine plans - Tectonic elements and figure of strata |
| DIN 21961-2000 |
礦山測量學.懸式經緯儀用滑套式樞軸和滑動帽.連接尺寸 |
Mine surveying - Slip-on pivots, slip-on caps for suspension theodolites - Connecting dimensions |
| DIN 2197-1998 |
絲錐.高速鋼磨齒絲錐的交貨技術條件 |
Screwing taps - Technical delivery conditions for grinded high-steel taps |
| DIN 220-1979 |
插入刀片式的套式鉸刀 |
(Shell reamers with inserted blades) |
| DIN 22005-1-1997 |
煤礦用原料分析.第1部分:概述 |
(Investigations of raw material in hard-coal-mining - Part 1: Survey) |
| DIN 22005-2-1997 |
煤礦用原料分析.第2部分:原料概念 |
Investigations of the raw material in hard-coal-mining - Part 2: Terms relating to raw material |
| DIN 2201-1992 |
機床.銑刀刀架用銑軸頭.內圓錐為莫氏錐度3-6和米制錐度80-200.尺寸 |
(Machine tools; taper shank receptacle with positive drive for morse taper 3 to 6 and metric taper 80 to 200; dimensions) |
| DIN 22011-1993 |
無煙煤礦原料檢驗.勘探鉆屑的處理 |
(Investigations of the raw material in hard-coal-mining; treatment of exploratory drillings) |
| DIN 22012-1994 |
煤礦開采中原材料勘測.煤礦及圍巖宏觀巖相分類和測定 |
(Investigations of the raw material in hard-coal-mining; macropetrographic classification and topographic survey of hard-coal and host rock) |
| DIN 22013-1985 |
煤礦原材料試驗礦槽試樣取樣及試驗大綱 |
(Investigations of the raw material in hard-coal-mining; channel sample; sampling and schema of tests) |
| DIN 22014-1985 |
煤礦原料試驗一個回采工作面的采掘物中的原煤試驗取出和試驗表 |
(Investigations of the raw material in hard-coal mining; raw coal sample from the production of a working area; sampling and schema of tests) |
| DIN 22015-1993 |
煤礦原料檢驗.覆層巖石的宏觀描述和分類 |
(Investigations of the raw material in hardcoal-mining; macroscopic classification and description of overburden rock) |
| DIN 22018-1985 |
煤礦原料試驗.用浮沉分析法測定粒度分布 |
(Investigations of the raw material in hard-coal-mining determation of the particle-density-distribution by float-and-sink-analysis) |
| DIN 22019-1-1985 |
煤礦原料試驗.測定粒度分布.通過篩分的粒度分布20μm |
(Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 m by sieve-analysis) |
| DIN 22019-2-1985 |
煤礦原料試驗.測定粒度分布.通過超聲微篩分析的粒度分布 |
(Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 60 m by ultrasonic-microsieve-analysis) |
| DIN 22020-1-1998 |
煤礦原料試驗.煤,焦碳和煤塊顯微檢驗.第1部分:概念.方法的概述和應用 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 1: Terms, survey of processes and their applications) |
| DIN 22020-2-1998 |
煤礦的原料試驗.煤,焦碳和煤碳和煤塊顯微試驗.第2部分:粉粒研磨片和煤塊研磨片的制作 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 2: Preparation of polished surface from lump material and particulate blocks) |
| DIN 22020-3-1998 |
煤礦的原料試驗.煤,焦碳和煤塊顯微試驗.第3部分:粉粒研磨片中煤的巖相組分的分析 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 3: Maceral analysis on particulated blocks) |
| DIN 22020-4-1998 |
煤礦的原料檢驗.煤,焦碳和煤塊的顯微檢驗.第4部分:粉粒研磨片上的微巖石類型分析 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 4: Microlithotype analysis on particulate blocks) |
| DIN 22020-5-1986 |
煤礦的原料試驗.煤、焦碳和煤塊的顯微試驗.鏡煤素質的反射測量 |
(Investigations of the raw material in hard-coal-mining microscopical examinations of hard coal, coke and briquettes; reflectance measurements on vitrinites) |
| DIN 22020-5-2005 |
無煙煤開采中原材料的勘測.無煙煤、焦碳和煤餅的顯微檢驗.第5部分:鏡煤的反射系數測量 |
|
| DIN 22021-1985 |
煤礦原料分析試驗.為標定工藝性能對礦石進行顯微檢驗分類 |
(Investigations of the raw material in hard-coal-mining; microscopical examinations of rocks) |
| DIN 22022-1-2001 |
固體燃料.痕量素含量的測定.第1部分:抽樣和樣品制備的一般規則.分析用樣品的制備(溶解法) |
(Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)) |
| DIN 22022-2-2001 |
固體燃料.痕量素含量的測定.第2部分:ICP-OES |
(Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES) |
| DIN 22022-3-2001 |
固體燃料.痕量素含量的測定.第3部分:AAS火焰法 |
(Solid fuels - Determination of trace elements - Part 3: AAS-flame method) |
| DIN 22022-4-2001 |
固體燃料.痕量素含量的測定.第4部分:無焰氫化系統的原子吸收分光光度測定法或冷卻蒸氣法 |
(Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method) |
| DIN 22022-5-2001 |
固體燃料.痕量素含量的測定.第5部分:電熱霧化法的原子吸收分光光度測定法 |
(Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization) |
| DIN 22022-6-2001 |
固體燃料試驗.痕量素的測定.第6部分:結果的評價和說明 |
(Testing of solid fuels - Determination of trace elements - Part 6: Evaluation and declaration of results) |
| DIN 22024-1989 |
煤礦的原料試驗.堅巖石分裂拉力強度的測定 |
(Investigations of the raw material in hard-coal-mining; determination of tensile strength on solid rock) |
| DIN 2207-2001 |
根據DIN2201的銑床軸頭刀具柄.配合尺寸 |
(Tool shanks for milling spindle noses according to DIN 2201 - Mating dimensions) |
| DIN 22100-3-1993 |
礦山井下用塑料器材和塑料設備.螺旋筒.安全技術要求.檢驗.標識 |
(Articles and materials from synthetic for use in underground mines; spiral air ducts; safety requirements, testing, marking) |
| DIN 22100-4-1993 |
礦山井下用塑料器材和塑料設備.扁平空氣導管.安全技術要求.檢驗.標識 |
(Articles and materials from synthetic for use in underground mines; flat air ducts; safety requirements, testing, marking) |
| DIN 22100-5-1993 |
礦山井下用塑料器材和塑料設備.管.管絕緣件和軟管.安全技術要求.檢驗.標識 |
(Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking) |
| DIN 22100-6-1993 |
礦山井下用塑料器材和塑料設備.薄膜、涂層和涂層織物.隔板材料和網狀背板.安全技術要求.檢驗.標識 |
(Articles and materials from synthetic for use in underground mines; sheeting, coated/uncoated tissue, brattice materials and lagging mats; safety requirements, testing, marking) |
| DIN 22100-7-2000 |
用于礦井下合成的材料和物品.第7部分:安全要求,試驗,標記 |
(Articles and materials from synthetics for use in underground mines - Part 7: Safety requirements, testing, marking) |
| DIN 22101-1982 |
連續輸送機.松散物料用皮帶輸送機.計算和設計原則 |
(Continuous mechanical handling equipment; Belt conveyors for bulk materials; Bases for calculation and design) |
| DIN 22102-1-1991 |
松散物料用帶織物層的輸送機皮帶.尺寸.要求.標志 |
(Conveyor belts with textile plies for bulk goods; dimensions, specifications, marking) |
| DIN 22102-3-1991 |
松散物料用帶織物層的輸送機皮帶.固定式皮帶連接 |
(Conveyor belts with textile plies for bulk goods; permanent joints) |
| DIN 22103-1994 |
耐火鋼絲繩輸送帶.要求.檢驗 |
(Flameresistant steelcord conveyor belts; requirements and method of test) |
| DIN 22107-1984 |
連續輸送機.松散物料皮帶輸送機的支承棍.主要尺寸 |
(Continous mechanical handling equipment; idler sets for belt conveyors for loose bulk materials; principal dimensions) |
| DIN 22109-1-2000 |
煤礦用織物輸送帶.第1部分:井下用單層襯墊輸送帶.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 1: Monoply belts for underground applications; dimensions, requirements) |
| DIN 22109-2-2000 |
煤礦用織物輸送帶.第2部分:井下用雙層襯墊橡膠輸送帶.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 2: Rubber-belts with two plies for underground applications; dimensions, requirements) |
| DIN 22109-4-2000 |
煤礦用織物輸送帶.第4部分:露天用雙層襯墊橡膠輸送帶.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 4: Rubber-belts with two plies for above ground applications; dimensions, requirements) |
| DIN 22109-5-1988 |
煤礦用織物輸送帶.標記 |
(Conveyor belts with textile plies for coalmining; branding) |
| DIN 2211-1-1984 |
傳動件.窄三角皮帶輪.尺寸.材料 |
(Power transmission elements; grooved pulleys for narrow V-belts; dimensions, materials) |
| DIN 2211-2-1984 |
傳動件.窄三角皮帶輪.槽的檢驗 |
(Power transmission elements; grooved pulleys for narrow V-belts; inspection of grooves) |
| DIN 2211-3-1986 |
傳動件.窄三角皮帶輪.與電機的配用 |
(Power transmission elements; grooved pulleys for narrow V-belts; assignment of pulleys to electric motors) |
| DIN 22110-2-1997 |
輸送帶連接的檢驗方法.第2部分:耐用試驗.測定織物夾層輸送帶上連接件的運行時間 |
(Testing methods for conveyor belt joints - Part 2: Endurance running tests, determination of running time of belt joints at conveyor belts with textile plies) |
| DIN 22110-3-1993 |
輸送帶連接的檢驗方法.輸送帶連接耐用性測定 |
(Testing methods for conveyor belt joints; determination of time strength for conveyor belt joints (dynamical testing method)) |
| DIN 22111-2000 |
地下煤礦開采用皮帶輸送機.輕型承載支架 |
(Belt conveyors for underground coal mining - Light construction) |
| DIN 22112-1-2000 |
地下煤礦開采用皮帶輸送機.支承棍.第1部分:尺寸 |
(Belt conveyors for underground coal mining - Idlers - Part 1: Dimensions) |
| DIN 22112-2-1996 |
地下煤礦開采用皮帶輸送機.支承棍.第2部分:要求 |
(Belt conveyors for underground coalmining - Idlers - Part 2: Requirements) |
| DIN 22112-3-1996 |
地下煤礦開采用皮帶輸送機.支承棍.第3部分:檢驗 |
(Belt conveyors for underground coalmining - Idlers - Part 3: Testing) |
| DIN 22114-2001 |
地下煤礦用皮帶輸送機.重型支架 |
(Belt conveyors for underground coalmining - Heavy construction) |
| DIN 22115-1990 |
地下煤礦用皮帶輸送機.托輥的涂層.要求和檢驗 |
(Belt conveyors for underground coalmining; coated idlers; requirements and testing) |
| DIN 22116-1994 |
地下煤礦用帶式輸送機.額定直徑156MM的壓輥.尺寸.要求.標識 |
(Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking) |
| DIN 22117-1988 |
煤礦用輸送帶.氧特性值的測定 |
(Conveyor belts for coalmining; determination of the oxygen index) |
| DIN 22118-1991 |
煤礦用帶織物層的輸送帶.耐火檢驗 |
(Conveyor belts with textile plies for use in coal mining; fire testing) |
| DIN 22121-2000 |
煤礦用織物輸送帶.帶單層或雙層襯墊的不可拆卸的連接.尺寸、要求和標記 |
(Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies; dimensions, requirements, marking) |
| DIN 22122-2003 |
連續式機械搬運設備.輸送帶的可成槽形能力.與拉緊皮帶輪接觸的運輸機皮帶傳送裝置寬度部分的測量 |
(Continous mechanical handling equipment - Troughability of conveyor belts - Determination of that portion of width of conveyor belting in contact with idlers; Requirements, testing) |
| DIN 22129-1-1988 |
煤礦井下用鋼索輸送帶.尺寸.要求 |
(Steel cord conveyor belts for underground coalmining; dimensions, requirements) |
| DIN 22129-2-1988 |
煤礦井下用鋼索輸送帶.標記 |
(Steelcord conveyor belts for underground coalmining; marking) |
| DIN 22129-3-1988 |
煤礦井下用鋼索輸送帶.檢驗 |
(Steelcord conveyor belts for underground coalmining; testing) |
| DIN 22129-4-1991 |
地下煤礦用鋼索傳送帶.傳送帶的聯結(草案)尺寸、要求 |
(Steelcord conveyor belts for use in underground coal mining; belt joints; dimensions, requirements) |
| DIN 22131-1-1988 |
一般輸送技術用鋼索輸送帶.尺寸.要求 |
(Steelcord conveyor belts for hoisting and conveying; dimensions, requirements) |
| DIN 22131-2-1988 |
一般輸送技術用鋼索輸送帶.標記 |
(Steelcord conveyor belts for hoisting and conveying; marking) |
| DIN 22131-3-1988 |
一般輸送技術用鋼索輸送帶.檢驗 |
(Steelcord conveyor belts for hoisting and conveying; testing) |
| DIN 22131-4-1988 |
一般輸送技術用鋼索輸送帶.帶連接.尺寸.要求 |
(Steelcord conveyor belts for hoisting and conveying; belt joints; dimensions, requirements) |
| DIN 2215-1998 |
環形三角皮帶.標準的三角皮帶.尺寸 |
(Endless V-belts - Classical V-belts - Dimensions) |
| DIN 2216-1972 |
開端的三角皮帶.尺寸 |
(Open Ended V-belts; Dimensions) |
| DIN 2217-1-1973 |
傳動件.三角皮帶輪.尺寸.材料 |
(Driving Elements; V-belt Pulleys; Dimensions, Material) |
| DIN 2217-2-1973 |
傳動件.三角皮帶輪.槽的檢驗 |
(Driving Elements; Grooved Pulleys for V-belts; Testing of Grooves) |
| DIN 2218-1976 |
機械制造用環形三角皮帶.傳動計算.額定功率 |
(Endless V-belts for Mechanical Engineering; Calculation of Drives, Power Ratings) |
| DIN 222-1981 |
套式擴孔鉆 |
(Shell drills) |
| DIN 22200-1994 |
連續輸送機.履帶式輸送機.計算原則 |
(Continuous mechanical handling equipment; apron conveyors; principles for calculation) |
| DIN 2221-1982 |
按DIN238T.2的鉆夾錐套用錐度塞規 |
(Taper plug gauges for taper sleeves for drill chucks) |
| DIN 2222-1982 |
按DIN238T.1和T.2的鉆夾錐套用錐度環規 |
(Taper ring gauges for taper shafts for drill chucks) |
| DIN 22252-2001 |
經檢驗的礦用輸送機和回采設備的圓鋼鏈 |
(Round steel link chains for conveyors and winning equipment in mining) |
| DIN 22253-1987 |
鏈連接節.鏈鉤裝配.尺寸.要求.檢驗 |
(Chain connectors; shackle type connector units; dimensions, requirements, testing) |
| DIN 22255-2001 |
礦山中連續輸送機用的平扁節鏈 |
(Flat link chains for use in continuous conveyors in mining) |
| DIN 22256-2002 |
鏈?zhǔn)捷斔蜋C(jī)和采煤設備用鏈輪組件.尺寸,要求和試驗 |
(Chain sprockets for chain conveyors and coal winning equipment - Dimensions, requirements, testing) |
| DIN 22257-1990 |
鏈?zhǔn)焦伟遢斔蜋C(jī)用刮板.外鏈帶.尺寸.要求.檢驗 |
(Scraper bars for chain conveyors; outboard chain assembly; dimensions, requirements, testing) |
| DIN 22258-1-2003 |
鏈連接件.第1部分:扁形連接件 |
(Chain connectors - Part 1: Flat type connectors) |
| DIN 22258-2-2003 |
鏈連接件.第2部分:楔形連接件 |
(Chain connectors - Part 2: Kenter type connectors) |
| DIN 22258-3-2003 |
鏈連接件.第3部分:塊狀連接件 |
(Chain connectors - Part 3: Block type connectors) |
| DIN 22261-1-1997 |
褐煤露天礦中的挖掘機,排土機和附屬裝置.第1部分:結構,開工運轉和檢驗 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring) |
| DIN 22261-1-2004 |
褐煤露天礦中的挖掘機、拋煤機和附屬裝置.第1部分:建造、投產和監測 |
|
| DIN 22261-2 Berichtigung 1-2003 |
DIN22261-2-1998的技術勘誤 |
(Corrigenda to DIN 22261-2:1998-01) |
| DIN 22261-2-1998 |
褐煤露天礦用挖掘機,帶式排土機和輔助裝置.第2部分:設計原則 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 2: Calculation principles) |
| DIN 22261-3-1997 |
褐煤露天礦中的挖掘機,排土機和附屬裝置.第3部分:焊接連接,接口方式,評定等級分類,檢驗說明 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Welded connections, joint types, classification, test instruction) |
| DIN 22261-4-1997 |
褐煤露天礦中的挖掘機,排土機和附屬裝置.第4部分:提升鉸車用機械制動器 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4: Hoisting winch brakes) |
| DIN 22261-5-1997 |
褐煤露天礦中的挖掘機,排土機和附屬裝置.第5部分:回轉裝置用機械制動器和超載保險器 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices) |
| DIN 22261-6-1997 |
褐煤露天礦中的挖掘機,排土機和附屬裝置.第6部分:繩索和繩索緊固的檢驗 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings) |
| DIN 2231-1982 |
公稱尺寸3至100mm的極限卡規及鍛制量規體 |
(Gap gauges “GO and NOT GO“ and forged gauging members above 3 to including 100 mm nominal size) |
| DIN 2232-1982 |
公稱尺寸3至100mm帶鍛制量規體的通端卡規 |
(Gap gauges “GO“ with forged gauging member above 3 to and including 100 mm nominal size) |
| DIN 2233-1982 |
公稱尺寸3至100mm帶鍛制量規體的止端卡規 |
(Gap gauges “NOT GO“ with forged gauging member above 3 to and including 100 mm nominal size) |
| DIN 2239-1995 |
幾何尺寸檢驗.工業長度檢驗用量規.要求和檢驗 |
(Verification of geometrical parameters - Gauges in dimensional metrology - Requirements and testing) |
| DIN 2240-1-2001 |
幾何產品規范(GPS).手柄.第1部分:公稱直徑40mm以下帶有1:50錐形軸頸的量規手柄 |
(Geometrical Product Specification (GPS) - Handles - Part 1: For gauging members with taper lock 1:50 up to 40 mm nominal diameter) |
| DIN 2240-2-2001 |
幾何產品規范(GPS).手柄.第2部分:公稱直徑40mm以上的量規手柄.手柄.固定螺釘和夾件 |
(Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps) |
| DIN 2240-3-2001 |
幾何產品規范(GPS).手柄.第3部分:精密工業用的量規體手柄 |
(Geometrical Product Specification (GPS) - Handles - Part 3: For gauging members for use in precision mechanics) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com