標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 663-2002 |
動植物脂肪和油.不可溶解雜質含量的測定 |
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2000); German version EN ISO 663:2001 |
| DIN EN ISO 664-1995 |
油料種子.將小樣縮分為分析試樣 |
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990); German version EN ISO 664:1995 |
| DIN EN ISO 665-2001 |
油料種子.水和揮發物質含量的測定 |
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000); German version EN ISO 665:2000 |
| DIN EN ISO 6682-1995 |
土方機械.控制裝置的最佳操作和活動范圍 |
Earth moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amendment 1:1989); German version EN ISO 6682:1995 |
| DIN EN ISO 6683-1999 |
土方機械.座椅安全帶和座椅安全帶固定件 |
Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990); German version EN ISO 6683:1999 |
| DIN EN ISO 6683-2005 |
土方機械.座椅安全帶和座椅安全帶固定器.性能要求和試驗 |
|
| DIN EN ISO 6708-1995 |
管件.DN(公稱寬度)的定義和選擇 |
(Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995) |
| DIN EN ISO 6721-1-2003 |
塑料.動態機械性能的測定.第1部分:一般原理 |
(Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001); German version EN ISO 6721-1:2002) |
| DIN EN ISO 6721-2-1996 |
塑料.電動機械性能的測定.第2部分:扭擺法 |
(Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-2:1996) |
| DIN EN ISO 6721-3-1996 |
塑料.電動機械性能的測定.第3部分:彎曲振動.共振法 |
(Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration; resonance-curve (ISO 6721-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-3:1996) |
| DIN EN ISO 6743-4-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.第4部分:H族(液壓系統) |
(Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001) |
| DIN EN ISO 6744-1-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第1部分:通用試驗方法 |
|
| DIN EN ISO 6744-2-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第2部分:鄰苯二甲酸酐含量的測定 |
|
| DIN EN ISO 6744-3-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第3部分:非皂化物含量的測定 |
|
| DIN EN ISO 6744-4-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第4部分:脂肪酸含量的測定 |
|
| DIN EN ISO 6800-1998 |
動植物脂肪和油.甘油三酸脂分子的2位中脂肪酸的化學成份的測定 |
(Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997); German version EN ISO 6800:1997) |
| DIN EN ISO 6803-1997 |
橡膠和塑料軟管及軟管管道.無彎曲的液壓壓力脈沖試驗 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 6806-1996 |
用于油燃燒器的軟管和軟管組件.規范 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 |
| DIN EN ISO 6807-2004 |
旋轉式鉆探和振動用橡膠軟管和軟管組件.規范 |
|
| DIN EN ISO 6808-2000 |
石油液態產品的抽吸和低壓排放用塑料軟管及軟管組件.規范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN ISO 6817-1995 |
封閉管道中導電液體流量測量.電磁流率計測量法 |
Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995 |
| DIN EN ISO 683-17-2000 |
熱處理鋼、合金鋼和易切削鋼.第17部分:球軸承和滾動軸承鋼 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999 |
| DIN EN ISO 6845-2003 |
表面活性劑.工業鏈烷磺酸鹽.鏈烷單磺酸鹽平均相對分子量和鏈烷單磺酸鹽含量的測定 |
(Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003) |
| DIN EN ISO 6847-2002 |
焊接消耗品.化學分析用焊接金屬塊的沉積 |
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000); German version EN ISO 6847:2001 |
| DIN EN ISO 6860-1995 |
色漆和清漆.彎曲試驗(錐體心軸) |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984); German version EN ISO 6860:1995 |
| DIN EN ISO 6865-2001 |
動物飼料.粗纖維含量的測定.中間過濾法 |
Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 |
| DIN EN ISO 6867-2001 |
動物飼料.維生素E含量的測定.使用高性能液相色譜法 |
Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000); German version EN ISO 6867:2000 |
| DIN EN ISO 6869-2001 |
動物飼料.鈣,銅,鐵,鎂,鉀,錳和鈉,鋅含量的測定.原子吸收光譜法 |
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000); German version EN ISO 6869:2000 |
| DIN EN ISO 6871-1 Berichtigung 1-2000 |
對DIN EN ISO 6871-1:1996-12的勘誤 |
Corrigenda to DIN EN ISO 6871-1:1996-12 |
| DIN EN ISO 6871-1-1996 |
牙科基本金屬鑄造合金.第1部分:鈷基合金 |
Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994); German version EN ISO 6871-1:1996 |
| DIN EN ISO 6871-2-1996 |
牙科基本金屬鑄造合金.第2部分:鎳基合金 |
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994); German version EN ISO 6871-2:1996 |
| DIN EN ISO 6872-1999 |
牙科烤瓷 |
Dental ceramic (ISO 6872:1995 including Amendment 1:1997): German version EN ISO 6872:1998 |
| DIN EN ISO 6873-2000 |
牙科用石膏制品 |
Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000 |
| DIN EN ISO 6874-2005 |
牙科學.樹脂基窩溝和裂紋封閉劑 |
|
| DIN EN ISO 6875-1996 |
牙科設備.牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995); German version EN ISO 6875:1996 |
| DIN EN ISO 6876-2003 |
牙科牙根管充填材料 |
(Dental root canal sealing materials (ISO 6876:2001); German version EN ISO 6876:2002) |
| DIN EN ISO 6877-1998 |
牙科用牙根管充填針 |
Dental root-canal obturating points (ISO 6877:1995); German version EN ISO 6877:1998 |
| DIN EN ISO 6878-2004 |
水質.磷的測定.第1部分:鉬酸銨的光譜測定法 |
|
| DIN EN ISO 6885-2000 |
動植物脂肪和油.茴香胺值的測定 |
Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:1998); German version EN ISO 6885:2000 |
| DIN EN ISO 6887-1-1999 |
食品和動物飼料的微生物學.用于微生物檢驗的初始懸浮和十倍制稀釋的試驗樣品的制備.第1部分:初始懸浮和十倍制稀釋液制備的一般規則 |
Microbiology of food and animal feeding stuffs - Preparation of the test samples, of initial suspension and of decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (I |
| DIN EN ISO 6887-2-2004 |
食品和動物飼料的微生物學.用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的準備.第2部分:肉和肉制品準備 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO 6887-2:2003); German versi) |
| DIN EN ISO 6887-2-2004 |
食品和動物飼料的微生物學.用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的準備.第2部分:肉和肉制品準備的特殊規則 |
|
| DIN EN ISO 6888-1-1999 |
食品和動物飼料的微生物學.凝膠水平計數方法(陽性葡萄球菌和其它屬).第1部分:用Baird-Parke瓊脂培養基技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium (ISO 6888-1:1999); German version EN IS |
| DIN EN ISO 6888-2-1999 |
食品和動物飼料的微生物學.凝膠水平計數方法(陽性葡萄球菌和其它屬).第2部分: 兔原生質血纖蛋白質瓊脂培養基技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999); German v |
| DIN EN ISO 6888-3-2003 |
食品和動物飼料微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法.第3部分:低數值探測和 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003); German version E |
| DIN EN ISO 6888-3-2005 |
食品和動物飼料的微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法.第3部分:低數值檢測和MPN技術 |
|
| DIN EN ISO 6926-2001 |
聲學.聲功率級測定用基準聲源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000); German version EN ISO 6926:2001 |
| DIN EN ISO 694-2001 |
船和造船技術.船上磁羅盤的定位 |
Ships and marine technology - Positioning of magnetic compasses in ships (ISO 694:2000); German version EN ISO 694:2001 |
| DIN EN ISO 6940-1995 |
織物.耐燃性.垂直定向樣品的易燃性的測定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:1984, including Amendment 1:1993); German version EN ISO 6940:1995 |
| DIN EN ISO 6940-2004 |
紡織織物.燃燒性能.垂直向樣品易點燃性的測定 |
|
| DIN EN ISO 6941-1995 |
織物.耐燃性.垂直定向樣品延燃性的測定 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941, including Amendment 1:1992); German version EN ISO 6941:1995 |
| DIN EN ISO 6941-2004 |
紡織物.燃燒性能.垂直定向試品火焰蔓延性的測量 |
|
| DIN EN ISO 6942-2002 |
防護服裝.防熱和防火用服裝的試驗方法.對受到輻射熱源影響時的材料和材料組件的評定 |
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002); German version EN ISO 6942:2002 |
| DIN EN ISO 6945-2000 |
橡膠軟管.外涂層耐磨性的測定 |
Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 |
| DIN EN ISO 6946-1996 |
建筑組件.熱導通阻力和熱傳遞率.計算方法 |
Building components - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996); German version EN ISO 6946:1996 |
| DIN EN ISO 6947-1997 |
焊縫.工作位置.傾斜角和旋轉角的定義 |
Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993); German version EN ISO 6947:1997 |
| DIN EN ISO 6974-1-2002 |
天然氣.用氣相色譜法測定規定的不確定度組分.第1部分: 特定分析導則 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1:2000); German version EN ISO 6974-1:2001 |
| DIN EN ISO 6974-2-2002 |
天然氣.用氣相色譜法測定規定的不確定度組分.第2部分:測量系統特征和數據處理統計資料 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001); German version EN ISO 6974-2:2002 |
| DIN EN ISO 6974-3-2002 |
天然氣.用氣相色譜法測定規定的不確定度組分.第3部分:用兩填充柱測定氫、氦、氧、氮、二氧化碳和C以上烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C using two packed columns (ISO 6974-3:2000); German version EN |
| DIN EN ISO 6974-4-2002 |
天然氣.用氣相色譜法測定規定的不確定度組分.第4部分:用兩填充柱測定實驗室和在線測量系統的氮、二氧化碳和C和的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000); |
| DIN EN ISO 6974-5-2002 |
天然氣.用氣相色譜法測定規定的不確定度組分.第5部分:用三填充柱測定實驗室和在線測量系統的氮、二氧化碳和C和的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-5:20 |
| DIN EN ISO 6975-2005 |
天然氣.延伸分析.氣相色譜法 |
|
| DIN EN ISO 6976-2005 |
天燃氣.熱值、密度和相對密度及化合物沃泊指數的計算 |
|
| DIN EN ISO 6978-1-2005 |
天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣 |
|
| DIN EN ISO 6978-2-2005 |
天然氣.汞的測定.第2部分:用金/鉑合金混汞法對汞的采樣 |
|
| DIN EN ISO 6988-1997 |
金屬涂層和其它無機物涂層.在一般水分冷凝作用下的二氧化硫試驗 |
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994 |
| DIN EN ISO 7027-2000 |
水質.混濁度的測定 |
Water quality - Determination of turbidity (ISO 7027:1999); German version EN ISO 7027:1999 |
| DIN EN ISO 7029-2001 |
聲學.齡期聽力閾的統計分布(ISO 7029:2000) |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000); German version EN ISO 7029:2000 |
| DIN EN ISO 703-1-2000 |
傳送帶.橫向撓性和可成槽形性.第1部分:試驗方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999); German version EN ISO 703-1:1999 |
| DIN EN ISO 7040-1998 |
1型通用扭矩六角螺母(用非金屬墊圈).強度等級5,8和10 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997); German version EN ISO 7040:1997 |
| DIN EN ISO 7042-1998 |
2型通用扭矩六角螺母(用全金屬螺母).強度等級5,8,10和12 |
Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 (ISO 7042:1997); German version EN ISO 7042:1997 |
| DIN EN ISO 7045-1994 |
H型或Z型十字槽平頭螺釘.產品等級A |
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994); German version EN ISO 7045:1994 |
| DIN EN ISO 7046-1-1994 |
帶H型或Z型十字槽的沉頭螺釘(通用頭).產品等級A.第1部分:強度等級4.8 |
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994 |
| DIN EN ISO 7046-2-1994 |
十字槽沉頭螺釘(一般頭形).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬 |
Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994 |
| DIN EN ISO 7047-1994 |
帶H型或Z型十字槽半圓頭沉頭螺釘.產品等級A |
Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994); German version EN ISO 7047:1994 |
| DIN EN ISO 7048-1998 |
帶十字槽的圓柱頭螺釘 |
Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998 |
| DIN EN ISO 707-1997 |
奶乳和乳制品.取樣導則 |
Milk and milk products - Guidance on sampling (ISO 707:1997); German version EN ISO 707:1997 |
| DIN EN ISO 7085-2000 |
表面淬火和回火的米制滾螺紋螺釘?shù)臋C械和性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999 |
| DIN EN ISO 7088-2005 |
魚粉.詞匯 |
|
| DIN EN ISO 7089-2000 |
平墊圈.標準系列.產品等級A |
Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000 |
| DIN EN ISO 7090-2000 |
倒角平墊圈.標準系列.產品等級A |
Plain washers, chamfered - Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000 |
| DIN EN ISO 7091-2000 |
平墊圈.標準系列.產品等級C |
Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000 |
| DIN EN ISO 7092-2000 |
平墊圈.小型系列.產品等級A |
Plain washers - Small series, Product grade A (ISO 7092:2000); German version EN ISO 7092:2000 |
| DIN EN ISO 7093-1-2000 |
平墊圈.大型系列.第1部分:產品等級A |
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000 |
| DIN EN ISO 7093-2-2000 |
平墊圈.大型系列.第2部分:產品等級C |
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000 |
| DIN EN ISO 7094-2000 |
平墊圈.特大型系列.產品等級C |
Plain washers - Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000 |
| DIN EN ISO 7096-2001 |
土方機械.駕駛員座椅振動的實驗室評價 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000); German version EN ISO 7096:2000 |
| DIN EN ISO 7142-2004 |
色漆和清漆用粘合劑.環氧樹脂.通用試驗方法 |
|
| DIN EN ISO 7143-2004 |
色漆、清漆和粘合劑.表征水基涂層材料和粘合劑的試驗方法 |
|
| DIN EN ISO 7153-1-2001 |
外科儀器.金屬材料.第1部分:不銹鋼 |
Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000 |
| DIN EN ISO 717-1-1997 |
聲學.建筑物中和建筑物構件的隔音參數.第1部分:氣載音響隔音 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996); German version EN ISO 717-1:1996 |
| DIN EN ISO 717-2-1997 |
聲學.建筑物中和建筑物構件的隔音評定.第2部分:沖擊聲的隔絕 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996); German version EN ISO 717-2:1996 |
| DIN EN ISO 7200-2004 |
技術產品文獻.標題欄和文獻標題的數據字段 |
|
| DIN EN ISO 7208-2000 |
脫脂乳、乳清和乳酪.脂肪含量的測定.重量分析法(參照法) |
Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) (ISO 7208:1999); German version EN ISO 7208:1999 |
| DIN EN ISO 7214-2000 |
泡沫塑料.聚乙烯.試驗方法 |
Cellular plastics - Polyethylene - Methods of test (ISO 7214:1998); German version EN ISO 7214:2000 |
| DIN EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定壓降下的氣流值估計法 |
Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984); German version EN ISO 7231:1997 |
| DIN EN ISO 7233-1995 |
橡膠和塑料軟管及軟管組件.吸引阻力測定 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
| DIN EN ISO 7235-1995 |
聲學.消音輸送道測量步驟.插入損耗、流動噪聲和壓力損失 |
Acoutics - Measurement procedures for ducted silencers - Insertion loss, flow noise and total pressure loss (ISO 7235:1991); German version EN ISO 7235:1995 |
| DIN EN ISO 7235-2004 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003) |
| DIN EN ISO 7235-2004 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
|
| DIN EN ISO 7250-1997 |
工藝設計相關的基本人體測量 |
Basic human body measurements for technological design (ISO 7250:1996); German version EN ISO 7250:1997 |
| DIN EN ISO 7253-2002 |
涂料和清漆.耐中性鹽霧的測定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) (ISO 7253:1996); German version EN ISO 7253:2001 |
| DIN EN ISO 7263-1995 |
瓦楞紙.試驗起瓦楞后平面耐壓的測定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994); German version EN ISO 7263:1995 |
| DIN EN ISO 7278-1-1996 |
液態烴.動態測量.容積式流量計試驗系統.第1部分:一般原理 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995 |
| DIN EN ISO 7278-2-1997 |
液態烴.動態測量.容量計用驗證系統.第2部分:管式校準儀 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995 |
| DIN EN ISO 7284-1996 |
電阻焊設備.汽車工業用多點點焊的兩個單獨副線圈的變壓器詳細規范 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996 |
| DIN EN ISO 7287-2003 |
熱切割設備用圖形符號 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
| DIN EN ISO 7291-2001 |
氣體焊接設備.焊接,切割和同類過程中多方面系統的壓力調節 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); German version EN ISO 7291:2001 |
| DIN EN ISO 7327-1997 |
塑料.環氧樹脂用固化劑和催化劑.酸酐中游離酸測定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997 |
| DIN EN ISO 7328-2000 |
奶制食用冰和冰混合物配料.脂肪含量的測定.重量分析法 |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999); German version EN ISO 7328:1999 |
| DIN EN ISO 734-1-2001 |
油料種子殘留物.油含量的測定.第1部分:已烷(或輕油)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998); German version EN ISO 734-1:2000 |
| DIN EN ISO 734-2-2001 |
油料種子殘留物.油含量的測定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998); German version EN ISO 734-2:2000 |
| DIN EN ISO 7345-1996 |
熱絕緣.物理量與定義 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995 |
| DIN EN ISO 7346-1-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))第1部分:靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method (ISO 7346-1:1996); German version EN ISO 7346-1:1997 |
| DIN EN ISO 7346-2-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.第2部分:半靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996); German version EN ISO 7346-2:1997 |
| DIN EN ISO 7346-3-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科)急性致死物質毒性的測定.第3部分:徑流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996); German version EN ISO 7346-3:1997 |
| DIN EN ISO 7371-1996 |
家用冷凍設備.有低溫隔層和無低溫隔層的冰箱.特性和試驗方法 |
Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods (ISO 7371:1995); German version EN ISO 7371:1995 |
| DIN EN ISO 7376-2004 |
麻醉和呼吸設備.氣管插管用喉鏡 |
|
| DIN EN ISO 7380-1998 |
內六角平頭螺釘 |
Heaxagon socket button head screws (ISO 7380:1997); German version EN ISO 7380:1997 |
| DIN EN ISO 7380-2004 |
內六角平圓頭螺釘 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com