標準號 |
中文名稱 |
英文名稱 |
| DIN EN 61167/A3-1999 |
金屬鹵素燈.修正A3 |
(Metal halide lamps; Amendment A3 (IEC 61167:1992/A3:1998); German version EN 61167:1994/A3:1998) |
| DIN EN 61168-2000 |
放射治療模擬器.功能特性 |
(Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993); German version EN 61168:1994) |
| DIN EN 61169-1-1-1998 |
射頻連接器.第1-1部分:單一多系列雙語空白詳細規范 |
(Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detail specification (IEC 61169-1-1:1996); German version EN 61169-1-1:1997) |
| DIN EN 61169-1-1995 |
高頻連接件.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992); German version EN 61169-1:1994) |
| DIN EN 61169-1/A1-1997 |
射頻連接器.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A1:1996); German version EN 61169-1:1994/A1:1996) |
| DIN EN 61169-1/A2-1998 |
高頻連接件.第1部分:總規范.一般要求和測量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A2:1997); German version EN 61169-1:1994/A2:1997) |
| DIN EN 61169-31-2000 |
射頻連接器.第31部分:帶螺紋耦合的外導體1,0mm(0,039in)的內徑RF共軸連接器.特性阻抗50歐姆(1,0型) |
(Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling; characteristic impedance 50 ohms (type 1,0) (IEC 61169-31:1999); German version EN 61169-31:1999) |
| DIN EN 61169-32-2000 |
射頻連接器.第32部分:帶螺紋耦合的外導體1,85mm(0,072in)的內徑RF共軸連接器.特性阻抗50歐姆(1,85型) |
(Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with srew coupling; characteristic impedance 50 ohms (type 1,85) (IEC 61169-32:1999); German version EN 61169-32:1999) |
| DIN EN 61169-33-1998 |
射頻連接器.第33部分:BMA結構系列的高頻插接器用分規范 |
(Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors (IEC 61169-33:1996); German version EN 61169-33:1997) |
| DIN EN 61169-36-1998 |
射頻連接器.第36部分:帶孔徑搭鎖連接器的微型連接器的微型化高頻同軸插接器用分規范.50歐姆波阻抗(MCX型) |
(Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 Ohm (type MCX) (IEC 61169-36:1996); German version EN 61169-36:1997) |
| DIN EN 61173-1996 |
光電功率發生系統過壓保護.導則 |
(Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994) |
| DIN EN 61174-2002 |
航海導航和無線電通信裝置與系統 |
(Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2001); German version EN 61174: |
| DIN EN 61175-1995 |
信號和連接的術語名稱 |
(Designations for signals and connections (IEC 61175:1993); German version EN 61175:1993) |
| DIN EN 61176-1995 |
手握式電源電壓操作的圓鋸性能測量方法 |
(Hand-held electric mains voltage operated circular saws - Methods for measuring the performance (IEC 61176:1993); German version EN 61176:1993) |
| DIN EN 61179-1994 |
D2(NTSC,PAL,PAL-M)格式19mm磁帶螺旋掃描數字復合盒式錄像系統 |
(Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) (IEC 61179:1993); German version EN 61179:1993) |
| DIN EN 61180-1-1995 |
低壓設備的高壓試驗技術.第1部分:定義,試驗和方法要求 |
(High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992); German version EN 61180-1:1994) |
| DIN EN 61180-2-1995 |
低壓設備的高壓試驗技術.第2部分:試驗設備 |
(High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994) |
| DIN EN 61181-1994 |
浸漬絕緣材料.工廠試驗用電子設備溶解氣體分析的應用 |
(Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993); German version EN 61181:1993) |
| DIN EN 61183-1994 |
電聲學.聲級計的無規入射聲場及擴散聲場的校正 |
(Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994); German version EN 61183:1994) |
| DIN EN 61184-1998 |
卡口燈座 |
(Bayonet lampholders (IEC 61184:1997); German version EN 61184:1997) |
| DIN EN 61184-2005 |
卡口燈座 |
|
| DIN EN 61184/A1-2001 |
卡口燈座.修改件1 |
(Bayonet lampholders (IEC 61184:1997/A1:2000); Amendment A1; German version EN 61184:1997/A1:2001) |
| DIN EN 61185-1998 |
電源設備用的磁氧化鐵芯(ETD).尺寸 |
(Magnetic oxide cores (ETD-cores) intended for use in power supply applications - dimensions (IEC 61185:1992 + A1:1995); German version EN 61185:1997) |
| DIN EN 61187-1995 |
電氣和電子測量儀.隨機提供的文件 |
(Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified); German version EN 61187:1994) |
| DIN EN 61188-1-1-1998 |
印制電路板和印制電路板組件.設計和使用.第1部分:總要求.第1節:電子組件的平整度可見點 |
(Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements; flatness considerations for electronic assemblies (IEC 61188-1-1:1997); German version EN 61188-1-1:1997) |
| DIN EN 61188-1-2-1999 |
印制電路板和印制電路板組件.設計和使用.第1-2部分:總要求.確定的阻抗 |
(Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements; controlled impedance (IEC 61188-1-2:1998); German version EN 61188-1-2:1998) |
| DIN EN 61188-5-1-2003 |
印制電路板和印制電路板組件.設計和使用.第5-1部分:焊接(焊接區/接縫)考慮.總要求 |
(Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements (IEC 61188-5-1:2002); German version EN 61188-5-1:2002) |
| DIN EN 61188-5-2-2004 |
印制電路板和印制電路板組件.設計和使用.第5-2部分:焊接(焊接區/接縫)條件.分立件 |
|
| DIN EN 61188-5-6-2003 |
印制板和印制板組件.設計和使用.第5-6部分:附件的要求.四面帶有J形引線的片狀載體 |
(Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003) |
| DIN EN 61189-1-2002 |
電氣材料、印制板和其他互連結構和組裝件的試驗方法.第1部分:一般試驗方法和方法論 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1: General test methods and methodology (IEC 61189-1:1997 + A1:2001); German version EN 61189-1:1997 + A1:2001) |
| DIN EN 61189-2-2001 |
電氣材料、印制電路板和其它互連結構和組件的試驗方法.第2部分:互連結構用材料的試驗方法 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (includes Amendment A1:2000) (IEC 61189-2:1997 + A1:2000); German version EN 611 |
| DIN EN 61189-3-2000 |
電氣材料、互連結構和組件的試驗方法.第3部分:互連結構的試驗方法(印制電路板) |
(Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:1997 + A1:1999); German version EN 61189-3:1997 + A1:1999) |
| DIN EN 61190-1-1-2003 |
電子組件用連接材料.第1-1部分:電子組件中高質量互連用助焊劑的要求 |
(Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (IEC 61190-1-1:2002); German version EN 61190-1-1:2002) |
| DIN EN 61190-1-2-2003 |
電子組件用連接材料.第1-2部分:電子組件中高質量互連用焊錫的要求 |
(Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronic assembly (IEC 61190-1-2:2002); German version EN 61190-1-2:2002) |
| DIN EN 61190-1-3-2003 |
電子組件用連接材料.第1-3部分:電子焊接用電子級釬焊合金及有焊劑和無焊劑的固體焊料的要求 |
(Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002); German version EN 61190-1-3:2002) |
| DIN EN 61191-1-1999 |
印刷電路板組件.第1部分:總規范.使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 |
(Printed board assemblies - Part 1: Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998); German version EN 61191-1:1998) |
| DIN EN 61191-2-1999 |
印刷電路板組件.第2部分:分規范.表面安裝焊接組件的要求 |
(Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998); German version EN 61191-2:1998) |
| DIN EN 61191-3-1999 |
印刷電路板組件.第3部分:分規范.通孔安裝焊接組件的要求 |
(Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998); German version EN 61191-3:1998) |
| DIN EN 61191-4-1999 |
印刷電路板組件.第4部分:分規范.端點焊接組件的要求 |
(Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998); German version EN 61191-4:1998) |
| DIN EN 61192-3-2003 |
釬焊電子組件的工藝要求.第3部分:通孔安裝組件 |
(Workmanship requirements for soldered electric assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002); German version EN 61192-3:2003) |
| DIN EN 61193-1-2002 |
質量評定體系.第1部分:印制板組件缺陷注冊和分析 |
(Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001); German version EN 61193-1:2002) |
| DIN EN 61194-1996 |
獨立式光生伏打系統的特征參數 |
(Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified); German version EN 61194:1995) |
| DIN EN 61195-2000 |
雙頭熒光燈的安全規范 |
(Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999); German version EN 61195:1999) |
| DIN EN 61196-2-1995 |
高頻電纜規范.第2部分:聚四氟乙烯絕緣的半剛性高頻電纜和同軸電纜.分規范 |
(Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification (IEC 61196-2:1993); German version EN 61196-2:1995) |
| DIN EN 61196-2-2004 |
射頻電纜.第2部分:聚四氟乙烯絕緣的半剛性射頻電纜和同軸電纜分規范 |
|
| DIN EN 61196-3-1999 |
高頻電纜.第3部分:局域網用同軸電纜的分規范 |
(Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998); German version EN 61196-3:1998) |
| DIN EN 61196-3-2-1998 |
高頻電纜規范.第3-2部分:平面層布線數字通訊用同軸電纜.第2節:有效半徑達到185m,速率在10Mb/s以下的局域網 |
(Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German ve |
| DIN EN 61196-3-3-1998 |
高頻電纜規范.第3部分:平面層布線數字通訊用同軸電纜.第3節:有效半徑達到185m速率在10Mb/s(包括10Mb/s)的局 |
(Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring; Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997); German v |
| DIN EN 61196-4-2004 |
同軸通信電纜.第4部分:輻射電纜的分規范 |
|
| DIN EN 61197-1996 |
絕緣油.火焰線性傳播.使用玻璃纖維的試驗方法 |
(Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994) |
| DIN EN 61198-1995 |
絕緣礦物油.糖醛和有關化合物的測定檢驗方法 |
(Mineral insulating oils - Methods for the determination of 2-furfurol and related compounds (IEC 61198:1993); German version EN 61198:1994) |
| DIN EN 61199-2000 |
單頭熒光燈.安全規范 |
(Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999); German version EN 61199:1999) |
| DIN EN 612-1996 |
金屬薄板制懸吊檐槽和雨水下落管.概念,分類和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classification and requirements; German version EN 612:1996) |
| DIN EN 61202-1-2001 |
纖維光絕緣子.第1部分:一般規范 |
(Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000) |
| DIN EN 61203-1995 |
電工用合成有機酯.設備中變壓器酯的維護指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994) |
| DIN EN 61204-2001 |
直流輸出低壓供電裝置.性能特征 |
(Low-voltage power supply devices, d.c. output - Performance characteristics (IEC 61204:1993, modified + A1:2001); German version EN 61204:1995 + A1:2001) |
| DIN EN 61204-3 Berichtigung 1-2004 |
DIN EN 61204-3-2001的技術勘誤 |
|
| DIN EN 61204-3-2001 |
直流輸出低壓供電裝置.第3部分:電磁兼容性(EMC) |
(Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000) |
| DIN EN 61204-6-2001 |
直流輸出低壓供電裝置.第6部分:經過性能評定的低壓供電裝置的要求 |
(Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000); German version EN 61204-6:2001) |
| DIN EN 61205-1995 |
超聲學.牙齒除垢裝置.產品性能說明及測試 |
(Ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics (IEC 61205:1993); German version EN 61205:1994) |
| DIN EN 61207-1-1995 |
氣體分析器的性能說明.第1部分:概述 |
(Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994); German version EN 61207-1:1994) |
| DIN EN 61207-2-1995 |
氣體分析器的性能說明.第2部分:氣體中的氧(利用高溫電化檢測器) |
(Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994); German version EN 61207-2:1994) |
| DIN EN 61207-3 Berichtigung 1-2003 |
DINEN61207-3-2002的勘誤 |
(Corrigenda to DIN EN 61207-3:2002-11) |
| DIN EN 61207-3-2002 |
氣體分析儀.性能說明.第3部分:順磁氧氣分析儀 |
(Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002) |
| DIN EN 61207-6-1995 |
氣體分析儀的性能說明.第6部分:光度分析儀 |
(Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994) |
| DIN EN 61209-2000 |
海上導航和無線電通訊設備和系統.集成橋系統(IBS).操作、性能要求、試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999); German version EN 61209:1999) |
| DIN EN 61210-1995 |
連接裝置.銅電導體的扁型速接終端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified); German version EN 61210:1995) |
| DIN EN 61211-2005 |
標稱電壓1000V以上的架空線用陶瓷材料或玻璃絕緣子.空氣中脈沖擊穿試驗 |
|
| DIN EN 61212-1 Bb.1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.型號比較 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Comparision of types) |
| DIN EN 61212-1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第1部分:一般要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995); German version EN 61212-1:1995) |
| DIN EN 61212-2-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第2部分:檢驗方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995); German version EN 61212-2:1996) |
| DIN EN 61212-3-1-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第1節:圓型疊層卷繞管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995); German version EN 61212-3-1:1995) |
| DIN EN 61212-3-2-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第2節:圓型模壓管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995); German version EN 61212-3-2:1995) |
| DIN EN 61212-3-3-1996 |
電工用工業剛性熱固樹脂層壓圓管和棒材.第3部分:個別材料的規范.第3節:圓型模壓棒 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995); German version EN 61212-3-3:1995) |
| DIN EN 61213-1994 |
錄像帶上模擬聲音錄制.磁化極性 |
(Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994) |
| DIN EN 61215-1996 |
晶體硅地表光伏電池(PV)組件.設計質量和型號認可 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993); German version EN 61215:1995) |
| DIN EN 61217-1998 |
放射治療設備.坐標系,移動和標度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996); German version EN 61217:1996) |
| DIN EN 61217-2003 |
放射治療設備.坐標系、移動和標度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996 + A1:2000); German version EN 61217:1996 + A1:2001) |
| DIN EN 61219-1995 |
帶電作業.噴槍式短路裝置用的接地設備或接地輿短路設備 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing (IEC 61219:1993); German version EN 61219:1993) |
| DIN EN 61221-1996 |
礦物油產品和潤滑劑.三芳基-磷酸脂-渦輪機控制液體(類別ISO-L-TCD).要求 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993); German version EN 61221:1995) |
| DIN EN 61223-2-5-2004 |
醫用成像部門的評價及例行試驗.第2-5部分:穩定性試驗.圖像顯示裝置 |
|
| DIN EN 61223-2-6-1997 |
醫療X光放射科的評定和定期檢驗.第2-6部分:穩定性檢驗.計算機斷層攝影用X光設備 |
(Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests; X-ray equipment for computed tomography (IEC 61223-2-6:1994); German version EN 61223-2-6:1994) |
| DIN EN 61223-3-1-2001 |
醫院成像科中的評定和常規試驗.第3-1部分::驗收試驗.輻射照相和輻射顯微照相系統用X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999) |
| DIN EN 61223-3-2-2001 |
醫療X光放射科的評定和定期檢驗.第3-2部分:驗收試驗.乳腺X-射線設備成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996) |
| DIN EN 61223-3-3-2000 |
醫院成像科中的評定和常規試驗.第3-3部分:驗收試驗.數字減法血管造影術(DSA)用X線透視設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996) |
| DIN EN 61223-3-4-2001 |
醫療成像科中的評定和常規試驗.第3-4部分:驗收試驗.牙科X射線設備的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000) |
| DIN EN 61228-1995 |
太陽浴用的紫外線燈紫外線輻射量的規定和測量方法 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993); German version EN 61228:1994) |
| DIN EN 61228/A1-1997 |
太陽浴用的紫外線燈紫外線輻射量的規定和測量方法.補充件1 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993/A1:1996); German version EN 61228:1994/A1:1996) |
| DIN EN 61229-1997 |
交流設備帶電作業用剛性保護罩 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993, modified); German version EN 61229:1995) |
| DIN EN 61229/A1-1999 |
交流設備帶電作業用剛性保護罩.修正A1 |
(Rigid protective covers for live working on a.c. installations; Amendment A1 (IEC 61229:1993/A1:1998); German version EN 61229:1995/A1:1998) |
| DIN EN 61229/A2-2003 |
交流設備上帶電作業用剛性保護罩.修改件A2 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993/A2:2002); Amendment A2; German version EN 61229:1995/A2:2002) |
| DIN EN 61230-1996 |
帶電作業.便攜式接地電路或接地短路電路設備 |
(Live working - Portable equipment for earthing or earthing and short-circuiting (IEC 61230:1993, modified); German version EN 61230:1995) |
| DIN EN 61232-2001 |
電氣設備用包鋁鋼絲 |
(Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000) |
| DIN EN 61234-1-1994 |
電絕緣材料水解穩定性的試驗方法.第1部分:塑料薄膜 |
(Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994) |
| DIN EN 61234-2-1998 |
電絕緣材料.水解穩定性的試驗方法.第2部分:模制熱固材料 |
(Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998) |
| DIN EN 61235-1997 |
帶電作業.電工用絕緣空心管 |
(Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified); German version EN 61235:1995) |
| DIN EN 61236-1996 |
帶電作業用滑動座架,電桿夾及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified); German version EN 61236:1995) |
| DIN EN 61237-1-1995 |
廣播磁帶錄像機.測量方法.第1部分:技術要求 |
(Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994); German version EN 61237-1:1994) |
| DIN EN 61237-2-1996 |
廣播磁帶錄像機測量方法.第2部分:模擬合成錄像信號的電氣測量 |
(Methods of measurement for broadcast video tape recorders - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995); German version EN 61237-2:1995) |
| DIN EN 61237-3-1995 |
廣播磁帶錄像機測量方法.第3部分:模擬視頻信號的電氣測量 |
(Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995); German version EN 61237-3:1995) |
| DIN EN 61237-4-1998 |
廣播用磁帶錄像機.測量方法.第4部分:模擬音頻信號的功率特性的測量 |
(Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997); German version EN 61237-4:1997) |
| DIN EN 61238-1-2004 |
額定電壓36kV(Um=42kV)及以下的電力電纜用壓接和機械連接器.第1部分:試驗方法和要求 |
|
| DIN EN 61240-1997 |
壓電裝置.頻率控制和選擇用表面安裝裝置框圖制備.總則 |
(Piezoelectric devices - Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection; General rules (IEC 61240:1994); German version EN 61240:1997) |
| DIN EN 61241-1-2005 |
有可燃性粉塵場合用電氣設備.第1部分:外殼防護tD型 |
|
| DIN EN 61241-14-2005 |
有可燃性粉塵場合用電氣設備.第14部分:選擇和安裝 |
|
| DIN EN 61241-18-2005 |
有可燃性粉塵場合用電氣設備.第18部分:封裝mD型防護設備 |
|
| DIN EN 61241-18-2005 |
有可燃性粉塵場合用電氣設備.第18部分:封裝mD型防護設備 |
|
| DIN EN 61241-2-2-1996 |
用于易燃粉塵的電氣設備.第2部分:檢驗方法.第1節:粉塵傾倒的電阻測定法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994); German version EN 61241-2-2:1995) |
| DIN EN 61242-1997 |
電氣安裝材料.家用和類似用途的電纜盤 |
(Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified); German version EN 61242:1997) |
| DIN EN 61242-2004 |
電氣附件.家用和類似用途卷線盤 |
|
| DIN EN 61243-1 Berichtigung 1-2001 |
DINEN61243-1-1998的技術勘誤 |
(Corrigendum to DIN EN 61243-1 (VDE 0682 Teil 411):1998-05) |
| DIN EN 61243-1-1998 |
帶電作業.電壓檢測器.第1部分:1kV以上交流電壓用容電器類型 |
(Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61243-1:1993 + A1:1997); German version EN 61243-1:1997 + A1:1997) |
| DIN EN 61243-2-2001 |
帶電作業.電壓探測器.第2部分:1kV-36kV交流電壓用電阻類型 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (includes Amendment A1:2000) (IEC 61243-2:1995 + A1:1999 + Corrigendum 2000); German version EN 61243-2:1997 + A1:2000) |
| DIN EN 61243-2/A2-2003 |
帶電作業.電壓檢測器.第2部分:1kV-36kV交流電壓用電阻類型.修改件A2 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995/A2:2002); Amendment A2; German version EN 61243-2:1997/A2:2002) |
| DIN EN 61243-3-1999 |
帶電作業.電壓檢測器.第3部分:低壓網用兩極電壓檢測器 |
(Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998); German version EN 61243-3:1998) |
| DIN EN 61243-5-2002 |
帶電作業.電壓檢測器.第5部分:電壓檢測器(VDS) |
(Live working - Voltage detectors - Part 5: Voltage detective systems (VDS) (IEC 61243-5:1997, modified); German version EN 61243-5:2001) |
| DIN EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997) |
| DIN EN 61248-1-1998 |
電子和電信設備用變壓器和電感器.第1部份:總規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997) |
| DIN EN 61248-2-1998 |
電子和電信設備用變壓器和電感器.第2部份:有合格認證的信號變壓器用分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997) |
| DIN EN 61248-3-1998 |
電子和電信設備用變壓器和電感器.第3部份:有合格認證的電力變壓器用分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com