標準號 |
中文名稱 |
英文名稱 |
| DIN 65169-1986 |
航空和航天.硬焊和高溫釬焊結構.設計原則 |
(Aerospace; brazed and high-temperature brazed components; directions for design) |
| DIN 65170-1997 |
航空和航天.硬焊及高溫釬焊的金屬結構構件.交貨技術條件 |
(Aerospace - Brazed and high-temperature brazed metallic components - Technical specifications) |
| DIN 65171-1984 |
航空和航天.熔焊裝置和附加裝備的驗收.導向精度及運動精度 |
(Aerospace; acceptance testing of fusion welding jigs; and auxiliary equipment accuracy of control and movement) |
| DIN 65174-1991 |
航空和航天.鈦和鈦合金圓棒材.尺寸.質量 |
(Aerospace; round bars of titanium and titanium alloys; dimensions, masses) |
| DIN 65176-1987 |
航空和航天.管道的連接.結構.成品 |
(Aerospace; lacing of tube assemblies; design, manufacture) |
| DIN 65177-1986 |
航空和航天.鈦合金制MJ螺紋的六角頭膨脹螺釘.溫度315℃以下.額定抗拉強度1100MPa |
(Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 C) |
| DIN 65178-1-1985 |
航空和航天.液態或氣態介質的管道設計和安裝.概述和概念 |
(Aerospace; configuration and installation of fluid pipelines; survey and definitions) |
| DIN 65178-2-1985 |
航空和航天.液態或氣態介質的管道設計和安裝.管道.結構 |
(Aerospace; configuration and installation of fluid pipelines; tube assemblies, design) |
| DIN 65178-3-1985 |
航空和航天.液態或氣態介質的管道設計和安裝.管道.制造 |
(Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture) |
| DIN 65178-6-1987 |
航空和航天.液態或氣態質用管道的設計和制造.軟管管道.成品 |
(Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture) |
| DIN 65179-1993 |
航空和航天.鈦合金.短螺紋.額定抗拉強度1100MPa.溫度315℃以下具有筋狀翼形十字槽及MJ螺紋的埋頭配合螺栓 |
(Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 6518-1-1989 |
凹形直柄四分之一圓成型銑刀.尺寸 |
(Corner rounding concave milling cutters with parallel shank; dimensions) |
| DIN 6518-2-1990 |
凹形直柄四分之一圓成型銑刀.交貨技術條件 |
(Corner rounding concave milling cutters with parallel shank; technical delivery conditions) |
| DIN 65180-1986 |
航空和航天.帶背面可松開接點中密度和高密度圓形電器接件.安裝指南 |
(Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures) |
| DIN 65181-1989 |
航空和航天.導電層表面電阻的測量 |
(Aerospace; measurement of electrical surface resistance of conductive layers) |
| DIN 65183-1988 |
航空和航天.有機涂層耐雨水侵蝕時間的測量 |
(Aerospace; rain testing of organic coatings for the determination of the resistance to erosion) |
| DIN 65184-1993 |
航空和航天.碳纖維.高強度碳纖維素長絲紗.尺寸.質量 |
(Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses) |
| DIN 65185-1-1993 |
航空和航天.緊固零件.結構和非結構用旋轉緊固零件.交貨技術條件 |
(Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification) |
| DIN 65186-1990 |
航空和航天.用薄板和帶材造型的鋁合塑性合金型材.交貨的技術條件.不適用于新結構 |
(Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design) |
| DIN 65187-1986 |
航空和航天.鋁合金制帶通孔的復合材料用嵌件 |
(Aerospace; inserts for composite materials, with clearance hole, aluminium alloy) |
| DIN 65188-1986 |
航空和航天.鋁合金制復合材料用.帶MJ螺紋.小結構封閉式.螺釘鎖緊嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy) |
| DIN 65189-1986 |
航空和航天.鋁合金制帶通孔的復合材料用.帶MJ螺紋.開口式.螺釘鎖緊接頭 |
(Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy) |
| DIN 65190-1986 |
航空和航天.鋁合金制帶通孔的復合材料用.帶MJ螺紋.封閉式.螺釘鎖緊接頭 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy) |
| DIN 65191-2002 |
航空航天.耐腐蝕鋼制復合材料用帶MJ螺紋的活動螺紋件和螺釘鎖緊接頭 |
(Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel) |
| DIN 65194-1986 |
航空和航天.圓形電氣接插件用盲塞 |
(Aerospace; sealing plugs for electrical circular connectors) |
| DIN 65196-1987 |
航空和航天.園形電氣插接件用防松墊圈 |
(Aerospace; lockwasher for electrical circular connectors) |
| DIN 65197-1989 |
航空和航天.作為螺釘預制材料的鈦合金制圓棒料及線材.尺寸.質量 |
(Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses) |
| DIN 65202-1999 |
航空和航天.彈性體O型圈.尺寸 |
(Aerospace series - Elastomeric O-rings - Dimensions) |
| DIN 65203-2001 |
航空和航天.彈性體O型密封圈.技術規范 |
(Aerospace series - Elastomeric O-rings - Technical specification) |
| DIN 65207-1987 |
航空和航天.鋁塑性合金薄板型材的公差 |
(Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)) |
| DIN 65209-2001 |
航空航天系統.沉頭墊圈 |
(Aerospace series - Washers, countersunk) |
| DIN 65210-1-1987 |
航空和航天.額定壓力210巴以下的軟管管道.軟管交貨技術條件 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses) |
| DIN 65210-2-1987 |
航空和航天.額定壓力210巴以下的軟管管道.軟管旋緊螺栓連接件的交貨技術條件 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings) |
| DIN 65210-3-1987 |
航空和航天.額定壓力210巴以下的軟管管道.交貨技術條件.成套軟管管道 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies) |
| DIN 65211-1-1987 |
航空和航天.額定壓力210巴的軟管管道.軟管交貨技術條件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses) |
| DIN 65211-2-1987 |
航空和航天.額定壓力210巴的軟管管道.軟管旋緊螺栓的交貨技術條件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings) |
| DIN 65211-3-1987 |
航空和航天.額定壓力210巴的軟管管道.成套的軟管管道交貨技術條件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies) |
| DIN 65212-1988 |
航空和航天.低壓用儀表軟管.交貨技術條件 |
(Aerospace; instrumentation low pressure hoses; technical specification) |
| DIN 65213-1988 |
航空和航天.軟管公稱壓力為35巴以下套管軟管.交貨技術條件 |
(Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification) |
| DIN 65220-2002 |
航空航天.帶MJ螺紋自鎖螺母的鉚接螺母板.螺母間距固定或可選擇.鋁制板.等級1100MPa/120℃ |
(Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 鳦) |
| DIN 65221-1989 |
航空和航天.彈性軟木板.交貨技術條件.不適用于新式結構 |
(Aerospace; sheets from rubber-cork; technical specification) |
| DIN 65227-1992 |
航空和航天.手持式銑具用導套.復位:2.5mm |
(Aerospace; workshop facilities; guide bushes for hand milling machines, clearance 2,5 mm) |
| DIN 65228-1986 |
航空和航天；釬焊工考試.金屬構件的硬釬焊 |
(Aerospace; examination of brazers; brazing of metallic parts) |
| DIN 65228-2005 |
航空航天.釬焊工能力鑒定試驗.金屬件釬焊 |
|
| DIN 65229-1979 |
航空航天.密封墊板.技術規范 |
(Aerospace; gaskets sheets, technical specification) |
| DIN 65230-1988 |
航空和航天.馬氏體硬化不銹鋼的陽極拋光.代號2600 |
(Aerospace; anodic polishing of maraging stainless steels; code number 2600) |
| DIN 65233-1986 |
航空和航天.電阻點焊機和滾縫焊機的驗收 |
(Aerospace; acceptance test of resistance spot and roller seam welding machines) |
| DIN 65236-1988 |
航空和航天.鋼絲.鎳和鈷合金.交貨技術條件 |
(Aerospace; steel, nickel- and cobalt-alloy wire; technical specification) |
| DIN 65237-1996 |
航空和航天.雙層鋼活塞節軸承.交貨技術條件.不適用于新結構 |
(Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design) |
| DIN 65238-2002 |
航空航天.自鎖、不浮動、鋼制角凸緣、帶MJ螺紋、深沉孔的鉚接螺母.等級:1100MPa/235℃ |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65239-1987 |
航空航天.自鎖、不浮動、角凸緣、耐腐蝕鋼制帶MJ螺紋的深沉孔的鉚接螺母.等級:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65240-2002 |
航空航天.等級為:1100MPa/235℃的帶沉孔及MJ螺紋的鋼制雙耳游動托板自鎖螺紋 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65242-1987 |
航空航天.自鎖、浮動、雙側凸緣、耐腐蝕鋼制帶MJ螺紋的深沉孔的鉚接螺母.等級:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65243-2002 |
航空航天.等級為:1100MPa/235℃的帶沉孔及MJ螺紋的鋼制單耳游動托板自鎖螺紋 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65244-1987 |
航空航天.自鎖、浮動、單凸緣、耐腐蝕鋼制帶圓柱形沉孔的MJ螺紋的鉚接螺母.等級:1100MPa/315攝氏度/425攝氏 |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65245-1984 |
航空和宇航.自鎖.鋼制.帶MJ螺紋的六角螺母.等級:1100MPa/120DEGREESC |
(Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 C) |
| DIN 65246-1984 |
航空和宇航.自鎖.鋼制.帶MJ螺紋的冠狀螺母.等級:1100MPa/120攝氏度 |
(Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 C) |
| DIN 65247-1989 |
航空和航天.耐腐蝕鋼制MJ螺紋平頭冠狀螺母.等級:110MPa/425攝氏度 |
(Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 C) |
| DIN 65249-1987 |
航空和航天.具有MJ螺紋.自鎖定.銅-塑性合金制六角螺母.等級:400MPa/120℃ |
(Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 C) |
| DIN 65250-1989 |
航空和航天.鈦及鈦合金制無縫內壓力管.尺寸.質量 |
(Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses) |
| DIN 65252-1999 |
航空和航天.混合網孔形彈性體泡沫塑料.半成品和模制品.交貨的技術條件 |
(Aerospace series - Cellular elastomeric materials, open and closed cells - Semi-finished products and moulded parts; technical specification) |
| DIN 65253-2002 |
帶內細齒的螺釘用的L形扳手 |
(L-wrench for screws with internal serration) |
| DIN 65254-2002 |
六角嵌入式旋具頭.帶內細齒的螺釘 |
(Hexagon insert bits - For screws with internal serrations) |
| DIN 65258-1989 |
航空和航天.100°沉頭米制系列鋁和鋁合金鉚釘 |
(Aerospace; rivets, 100 countersunk head, aluminium and aluminium alloys; metric series) |
| DIN 65259-1989 |
航空和航天.100°沉頭米制系列鋁和鋁合金小頭鉚釘 |
(Aerospace; rivets, 100 countersunk head, reduced, aluminium and aluminium alloys; metric series) |
| DIN 65260-1989 |
航空和航天.米制系列鋁和鋁合金通用鉚釘 |
(Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series) |
| DIN 65262-1-1996 |
航空和航天.密封材料.第1部分:多硫化物-聚合物基.交貨技術條件 |
(Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification) |
| DIN 65262-2-1998 |
航空和航天.密封材料.第2部分:偏氟乙烯-六氟丙烯基.交貨技術條件 |
(Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification) |
| DIN 65262-3-1996 |
航空和航天.密封材料.第3部分:硅橡膠基.交貨技術條件 |
(Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification) |
| DIN 65265-1998 |
航空和航天.鈦合金制螺紋接近頂部的MJ螺紋六角螺釘.溫度315℃及其以下用額定抗拉強度1100MPa |
(Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65266-1980 |
航空和航天.復蓋用織物.交貨的技術條件 |
(Aerospace; fabric covering, technical specification) |
| DIN 65267-1992 |
航空和航天.帶MJ螺紋的六角螺釘.螺紋接近于頭部.溫度235℃以下額定抗拉強度900MPa |
(Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C) |
| DIN 65268-1986 |
航空和航天.MJ螺紋的六角螺釘.短螺紋.鈦合金制.溫度達315°C額定抗拉強度1100MPa |
(Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65269-1987 |
航空和航天.具有筋狀翼形十字槽及MJ螺紋的埋頭配合螺栓..鋼制短螺紋.溫度235以下額定抗拉強度900MPa |
(Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C) |
| DIN 6527-2002 |
實心硬質合金帶槽直柄端銑刀.尺寸 |
(Solid hardmetal end mills with stepped parallel shank - Dimensions) |
| DIN 65270-1992 |
航空航天.帶耐蝕鋼制自鎖定MJ螺紋的冠狀螺母.等級:1100MPQ/120℃ |
(Aerospace; nuts, hexagon, slotted/castellated, with MJ thread self-locking, corrosion-resisting steel; classification: 1100 MPa/120 鳦) |
| DIN 65271-2002 |
航空航天系列.彈性半成品和部件.技術規范 |
(Aerospace series - Elastomeric semi-finished products and parts - Technical specification) |
| DIN 6528-2002 |
實心硬質合金不帶槽直柄端銑刀.尺寸 |
(Solid hardmetal end mills with continuous parallel shank - Dimensions) |
| DIN 65281-1992 |
航空航天.帶耐蝕鋼制MJ螺紋的扁六角螺母.等級:1100MPQ/315℃/425℃ |
(Aerospace; nuts, hexagon, thin, with MJ thread, corrosion resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65281-2005 |
航空航天系列.MJ螺紋、耐腐蝕鋼制薄型六角螺母.等級:1100MPa/315℃/425℃ |
|
| DIN 65284-1987 |
航空和航天.具有筋狀翼形十字槽及MJ螺紋的.螺紋接近于頭部.抗腐蝕鋼制埋頭配合螺栓.抗拉強度1100MPa.溫度可 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65285-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋的.短螺紋.耐腐蝕鋼制埋頭螺栓.額定抗拉強度1100MPa.溫度可達425℃ |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65286-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋的.短螺紋.鋼制埋頭螺栓.埋頭螺栓.額定抗拉強度900MPa.溫度可達235 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 c) |
| DIN 65289-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋的.短螺紋.鈦合金鋼制埋頭螺栓.埋頭螺栓.額定抗拉強度1100MPa.溫度 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 6529-1992 |
整體硬質合金直柄立銑刀.交貨技術條件 |
(Solid hardmetall end mills with parallel shank; technical delivery conditions) |
| DIN 65298-1988 |
航空和航天.旋轉軸用帶耐用潤滑的滾針軸承萬向節.萬向軸.連接尺寸.負荷.質量 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses) |
| DIN 65299-1988 |
航空和航天.旋轉軸用帶耐用潤滑的滾針軸承萬向節.雙萬向軸.連接尺寸.負荷.質量 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses) |
| DIN 653-1986 |
滾花扁型螺釘 |
(Knurled thin thumb screws) |
| DIN 65300-1988 |
航空和航天.旋轉軸用帶耐用潤滑的滾針軸承萬向節.交貨技術條件 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification) |
| DIN 65306-1986 |
航空和航天.不銹鋼制帶通孔的復合材料用嵌件 |
(Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel) |
| DIN 65307-1986 |
航空航天.帶MJ螺紋的小結構密封的螺釘鎖緊的不銹鋼制復合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel) |
| DIN 65308-1986 |
航空航天.帶MJ螺紋的開口式的螺釘鎖緊的不銹鋼制復合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel) |
| DIN 65309-1986 |
航空航天.密封式螺釘鎖緊的不銹鋼制復合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel) |
| DIN 65313-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋.螺紋接近頭部.耐腐蝕鋼制的平頭螺栓.額定抗拉強度1100MPa.溫度425 |
(Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65314-1998 |
航空和航天.帶筋狀翼形十字槽,MJ螺紋及短螺紋的鋼制沉頭配合螺釘.溫度235℃及其以下用額定抗拉強度11100MPa |
(Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 C) |
| DIN 65316-1993 |
航空和航天.耐蝕鋼制.短螺紋.額定抗拉強度1100MPa.溫度425℃以下具有筋狀翼形十字槽及MJ螺紋的埋頭配合螺栓 |
(Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65317-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋.短螺紋.鋼制的埋頭螺栓.額定抗拉強度1100MPa.溫度235℃以下 |
(Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
| DIN 65318-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋.短螺紋.鋼制平頭螺栓.額定抗拉強度1100MPa.溫度235℃以下 |
(Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 C) |
| DIN 65319-1987 |
航空和航天.具有筋狀翼形十字槽和MJ螺紋.短螺紋.耐腐蝕鋼制平頭配合螺栓.額定抗拉強度1100MPa.溫度425℃以 |
(Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65320-1993 |
航空和航天.鋼制.短螺紋.額定抗拉強度1100MPa.溫度235℃以下具有筋狀翼形十字槽及MJ螺紋的埋頭配合螺栓 |
(Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
| DIN 65321-1989 |
航空和航天.聚丙烯玻璃盤.防護板和模壓件.交貨技術要求 |
(Aerospace; acrylic sheets, panes and moulded parts; technical specification) |
| DIN 65324-1993 |
航空和航天.鈦合金.短螺紋.額定抗拉強度1100MPa.溫度315℃以下具有筋狀翼形十字槽及MJ螺紋的埋頭配合螺栓 |
(Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65330-1987 |
航空和航天.具有MJ螺紋.短螺紋鋼制六角螺栓.額定抗拉強度1100MPa.溫度可達235℃ |
(Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
| DIN 65338-1993 |
航空和航天.鈦合金.臺階式短螺紋.額定抗拉強度1100MPa.溫度315℃以下具有MJ螺紋的六角頭配合螺栓 |
(Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
| DIN 65339-1998 |
航空和航天.帶MJ螺紋,短螺紋,耐腐蝕鋼制六角配合螺釘.溫度425℃及其以下用額定抗拉強度1100MPa |
(Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
| DIN 65342-1987 |
航空航天.自鎖、雙耳、縮徑、耐腐蝕鋼制帶深沉孔的MJ螺紋系緊螺母.等級:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65342-2005 |
航空航天系列.耐腐蝕鋼制自鎖緊帶深沉孔、雙耳、縮徑、MJ螺紋地腳螺母.等級:1100MPa/315℃/425℃ |
|
| DIN 65343-2002 |
航空航天.等級為:1100MPa/235℃的帶MJ螺紋的鋼制鉚接螺母,圓柱形劃孔,自鎖緊,兩側縮短的凸緣 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65344-1987 |
航空航天.帶圓柱形深沉孔的具有MJ螺紋的鉚接螺母.自鎖、雙耳、耐腐蝕鋼制.等級:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65344-2005 |
航空航天.耐腐蝕鋼制帶深沉孔、雙耳、MJ螺紋自鎖緊地腳螺母.等級:1100MPa/315℃/425℃ |
|
| DIN 65345-1986 |
航空航天.帶圓柱形深沉孔的具有MJ螺紋的鉚接螺母.自鎖、雙耳、鋼制.等級:1100MPa/235℃ |
(Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 鳦) |
| DIN 65346-1987 |
航空航天.帶圓柱形深沉孔的具有MJ螺紋的鉚接螺母.單耳、耐腐蝕鋼制.等級:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, single lug, corrosions-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
| DIN 65347-2002 |
航空航天.等級為:1100MPa/235℃的帶沉孔及MJ螺紋的鋼制單耳的游動托板自鎖螺紋 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 鳦) |
| DIN 65348-1988 |
航空和航天.鈦合金無縫內承壓管.交貨技術條件 |
(Aerospace; seamles internal pressure tubes in titanium alloys; technical specification) |
| DIN 65349-2001 |
航空航天.米制螺紋的螺母和相關螺釘部件的鎖扭矩試驗.試驗方法 |
(Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods) |
| DIN 6535-1992 |
硬質合金麻花鉆和立銑刀用圓柱柄.尺寸 |
(Parallel shanks for hardmetal twist drills and end mills; dimensions) |
| DIN 65350-1-1988 |
航空和航天.鉚接.全鉚釘用鉚接工具鉚接的結構件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for solid rivets) |
| DIN 65350-2-1988 |
航空和航天.鉚接.盲鉚釘用鉚接工具鉚接的的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for blind rivets) |
| DIN 65350-3-1988 |
航空和航天.鉚接.螺栓鉚釘用鉚接工具鉚接的結構件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for threaded blind rivets) |
| DIN 65350-4-1988 |
航空和航天.鉚接.配合鉚釘用鉚接工具鉚接的結構件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com