標準號 |
中文名稱 |
英文名稱 |
| DIN EN 12385-9-2003 |
鋼絲繩.安全.第9部分:為載人設計用索道設備的鎖環鋼絲繩 |
(Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons; German version EN 12385-9:2002) |
| DIN EN 12386-1999 |
飲用水制備用化合物.硫酸銅 |
(Chemicals used for treatment of water intended for human consumption - Copper sulfate; German version EN 12386:1998) |
| DIN EN 12386-2005 |
人類生活用水處理用化學品.硫酸銅 |
|
| DIN EN 1239-1998 |
膠粘劑.凍熔穩定性 |
(Adhesives - Freeze-thaw stability; German version EN 1239:1998) |
| DIN EN 12390-1-2001 |
硬化混凝土試驗.第1部分:樣品和模型的形狀、尺寸和其他要求 |
(Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000) |
| DIN EN 12390-2-2001 |
硬化混凝土試驗.第2部分:強度試驗用的試樣的形成和處理 |
(Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000) |
| DIN EN 12390-3-2002 |
硬化混凝土試驗.第3部分:試樣的壓縮強度 |
(Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001) |
| DIN EN 12390-4-2000 |
硬化混凝土試驗.第4部分:壓縮強度.試驗機規范 |
(Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000) |
| DIN EN 12390-5-2001 |
硬化混凝土試驗.第5部分:試樣的結構強度 |
(Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000) |
| DIN EN 12390-6-2001 |
硬化混凝土試驗.第6部分:試樣的劈裂拉伸強度 |
(Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000) |
| DIN EN 12390-7-2001 |
硬化混凝土試驗.第7部分:硬化混凝土的密度 |
(Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000) |
| DIN EN 12390-8-2001 |
硬化混凝土試驗.第8部分:加壓條件下水的滲透深度 |
(Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000) |
| DIN EN 12391-1-2004 |
煙囪.金屬煙囪用執行標準.第1部分:非室內密封的加熱設備用煙囪 |
|
| DIN EN 12392-2000 |
鋁和鋁合金.鍛造產品.用于壓力設備生產的產品的特殊要求 |
(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000) |
| DIN EN 12393-1-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第1部分:概述 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations; German version EN 12393-1:1998) |
| DIN EN 12393-2-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第2部分:萃取和凈化的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and clean-up; German version EN 12393-2:1998) |
| DIN EN 12393-3-1998 |
清淡食品.農藥殘流物氣相色譜測定用多種殘留法.第2部分:測定和保障的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests; Version allemande EN 12393-3:1998) |
| DIN EN 12396-1-1998 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘流物的測定.第1部分:分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method; German version EN 12396-1:1998) |
| DIN EN 12396-2-1998 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘流物的測定.第2部分:色相氣譜法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method; German version EN 12396-2:1998) |
| DIN EN 12396-3-2000 |
清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定.第3部分:紫外分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000) |
| DIN EN 12397-2005 |
載人用索道裝置的安全要求.操作 |
|
| DIN EN 124-1994 |
排水設備的排水溝蓋和人孔蓋.結構原理.檢驗.標志.質量監督 |
(Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; German version EN 124:1994) |
| DIN EN 1240-1998 |
膠粘劑.羥基值和/或羥基含量的測定 |
(Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:1998) |
| DIN EN 12400-2003 |
窗戶和人行門.機械耐久性.要求和分類 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification; German version EN 12400:2002) |
| DIN EN 12402-1999 |
鉛和鉛合金.分析取樣方法 |
(Lead and lead alloys - Methods of sampling for analysis; German version EN 12402:1999) |
| DIN EN 12403-1998 |
條碼.結構數據組 |
(Bar coding - Structured data files; German version EN 12403:1998) |
| DIN EN 12406-1999 |
交換容器.C級熱交換容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class C - Dimensions and general requirements; German version EN 12406:1999) |
| DIN EN 12407-2000 |
天然石料試驗方法.巖石檢驗 |
(Natural stone test methods - Petrographic examination; German version EN 12407:2000) |
| DIN EN 12408-2005 |
載人員用索道裝置的安全要求.質量控制 |
|
| DIN EN 12409-1999 |
橡膠和塑料機械.熱成形機械.安全要求 |
(Rubber and plastics machines - Thermoforming machines - Safety requirements; German version EN 12409:1999) |
| DIN EN 1241-1998 |
膠粘劑.酸值測定 |
(Adhesives - Determination of acid value; German version EN 1241:1998) |
| DIN EN 12410-1999 |
交換容器.A級熱交換容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class A - Dimensions and general requirements; German version EN 12410:1999) |
| DIN EN 12413-1999 |
化合磨料制磨具的安全性要求 |
(Safety requirements for bonded abrasive products; German version EN 12413:1999) |
| DIN EN 12414-2000 |
車輛停車控制設備.付款和售票機 |
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements; German version EN 12414:1999) |
| DIN EN 12415-2003 |
機床的安全.小型數控車床和車床頂尖 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres (includes Amendment A1:2002); German version EN 12415:2000 + A1:2002) |
| DIN EN 12416-1-2001 |
固定滅火系統.粉末系統.第1部分:件的要求和試驗方法 |
(Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German version EN 12416-1:2001) |
| DIN EN 12416-1/A1-2004 |
固定滅火系統.粉末系統.第1部分:件的要求和試驗方法 |
|
| DIN EN 12416-2-2001 |
固定滅火系統.粉末系統.第2部分:設計、制造和維修 |
(Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance; German version EN 12416-2:2001) |
| DIN EN 12417-2001 |
機床的安全.組合加工中心機床 |
(Safety of machine tools - Machining centres; German version EN 12417:2001) |
| DIN EN 12418-2000 |
施工現場用磚石和石材切斷機.安全 |
(Masonry and stone cutting-off machines for job site - Safety; German version EN 12418:2000) |
| DIN EN 12419-1999 |
呼吸防護設備.帶全面罩、半面罩或四分之一面罩的輕型壓縮氣體線性呼吸儀器.要求、試驗、標記 |
(Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face masks, half masks or quarter masks - Requirements, testing, marking; German version EN 12419:1999) |
| DIN EN 1242-1998 |
膠粘劑.異氰酸脂的測定 |
(Adhesives - Determination of isocyanate value; German version EN 1242:1998) |
| DIN EN 12420-1999 |
銅和銅合金.鍛件 |
(Copper and copper alloys - Forgings; German version EN 12420:1999) |
| DIN EN 12421-1998 |
鎂和鎂合金.純鎂 |
(Magnesium and magnesium alloys - Unalloyed magnesium; German version EN 12421:1998) |
| DIN EN 12422-1999 |
西沙爾麻包扎麻繩 |
(Sisal twines; German version 12422:1999) |
| DIN EN 12423-1999 |
聚丙烯包扎麻繩 |
(Polypropylene twines; German version EN 12423:1999) |
| DIN EN 12424-2000 |
工業、商業用汽車庫門.抗風荷載特性.分類 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; German version EN 12424:2000) |
| DIN EN 12425-2000 |
工業、商業用汽車庫門.耐水滲透特性.分類 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; German version EN 12425:2000) |
| DIN EN 12426-2000 |
工業、商業用汽車庫門.透氣率.分類 |
(Industrial, commercial and garage doors and gates - Air permeability - Classification; German version prEN 12426:2000) |
| DIN EN 12427-2000 |
工業、商業用汽車庫門.透氣率.試驗方法 |
(Industrial, commercial and garage doors and gates - Air permeability - Test method; German version prEN 12427:2000) |
| DIN EN 12428-2000 |
工業、商業用汽車庫門.熱傳遞系數.計算要求 |
(Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; German version EN 12428:2000) |
| DIN EN 12429-1998 |
建筑業用隔熱材料.在特定的溫度和濕度條件下調節平衡濕度 |
(Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998) |
| DIN EN 1243-1999 |
膠粘劑.氨基和氨基甲醛冷凝縮合物中游離甲醛含量的測定 |
(Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates; German version EN 1243:1998) |
| DIN EN 12430-1998 |
建筑業用隔熱材料.集中負荷下性能的測定 |
(Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:1998) |
| DIN EN 12431-1998 |
建筑業用隔熱材料.夾層地板中隔熱材料厚度的測定 |
(Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998) |
| DIN EN 12432-1998 |
體操器械.平衡木.功能和安全技術要求.檢驗方法 |
(Gymnastic equipment - Balancing beams - Functional and safety requirements; test methods; German version EN 12432:1998) |
| DIN EN 12433-1-2000 |
工業和商用車庫門及大門.術語.第1部分:門的類型 |
(Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors; Trilingual version EN 12433-1:1999) |
| DIN EN 12433-2-2000 |
工業和商用車庫門及大門.術語.第2部分:門的部件 |
(Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors; Trilingual version EN 12433-2:1999) |
| DIN EN 12434-2000 |
低溫容器.低溫軟管 |
(Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000) |
| DIN EN 12436-2002 |
承重木結構用膠粘劑.酪蛋白膠粘劑.分類和性能要求 |
(Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements; German version EN 12436:2001) |
| DIN EN 12438-1998 |
鎂和鎂合金.鑄件陽極用鎂合金 |
(Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998) |
| DIN EN 12439-1998 |
一次性無菌直腸導管 |
(Sterile rectal catheters for single use; German version EN 12439:1998) |
| DIN EN 1244-1998 |
膠粘劑.在光線作用下粘接涂層的顏色和/或顏色變化的測定 |
(Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998) |
| DIN EN 12440-2001 |
天然石料.命名標準 |
(Natural stone - Denomination criteria; German version EN 12440:2000) |
| DIN EN 12441-1-2002 |
鋅及鋅合金.化學分析.第1部分:鋅合金中鋁的測定.滴定法 |
(Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method; German version EN 12441-1:2001) |
| DIN EN 12441-1-2004 |
鋅及鋅合金.化學分析.第1部分:鋅合金中鋁的測定.滴定法 |
|
| DIN EN 12441-2-2002 |
鋅及鋅合金.化學分析.第2部分:鋅合金中鎂的測定.火焰原子吸收光譜法 |
(Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric method; German version EN 12441-2:2001) |
| DIN EN 12441-3-2002 |
鋅及鋅合金.化學分析.第3部分:鉛、鎘、銅的測定.火焰原子吸收光譜法 |
(Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; German version EN 12441-3:2001) |
| DIN EN 12441-4-2003 |
鋅及鋅合金.化學分析.第4部分:鋅合金中鐵的測定.分光光度法 |
(Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method; German version EN 12441-4:2003) |
| DIN EN 12441-5-2003 |
鋅及鋅合金.化學分析.第5部分:初級鋅中鐵的測定.分光光度法 |
(Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method; German version EN 12441-5:2003) |
| DIN EN 12441-6-2003 |
鋅及鋅合金.化學分析.第6部分:鋁和鐵的測定.火焰原子吸收光譜法 |
(Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method; German version EN 12441-6:2003) |
| DIN EN 12442-1-2001 |
用于醫療裝置生產中的動物組織及其誘導生成物.第1部分:分析和風險管理 |
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk; German version EN 12442-1:2000) |
| DIN EN 12442-2-2001 |
用于醫療裝置生產中的動物組織及其誘導生成物.第2部分:資源、收集和處理控制 |
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling; German version EN 12442-2:2000) |
| DIN EN 12442-3-2001 |
用于醫療裝置生產中的動物組織及其誘導生成物.第3部分:病毒和傳輸劑的消除和/或失效的證實 |
(Animal tissue and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents; German version EN 12442-3:2000) |
| DIN EN 12444-2001 |
工業、商用和車庫門.防風.試驗和計算 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; German version EN 12444:2000) |
| DIN EN 12445-2001 |
工業、商用和車庫門.動力門的使用安全.試驗方法 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; German version EN 12445:2000) |
| DIN EN 12446-2003 |
煙囪.部件.混凝土外墻構件 |
(Chimneys - Components - Concrete outer wall elements; German version EN 12446:2003) |
| DIN EN 12447-2002 |
土工織物及其有關產品.測定耐水解作用的篩分試驗方法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2001) |
| DIN EN 12449-1999 |
銅和銅合金.通用無縫圓管 |
(Copper and copper alloys - Seamless, round tubes for general purposes; German version EN 12449:1999) |
| DIN EN 1245-1998 |
膠粘劑.pH值測定.檢驗方法 |
(Adhesives - Determination of pH - Test method; German version EN 1245:1998) |
| DIN EN 12450-1999 |
銅和銅合金.銅制無縫圓型毛細管 |
(Copper and copper alloys - Seamless, round copper capillary tubes; German version EN 12450:1999) |
| DIN EN 12451-1999 |
銅和銅合金.熱交換器用無縫圓管 |
(Copper and copper alloys - Seamless, round tubes for heat exchangers; German version EN 12451:1999) |
| DIN EN 12452-1999 |
銅和銅合金.熱交換器用無縫軋制加筋管 |
(Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:1999) |
| DIN EN 12453-2001 |
工業、商用和車庫門.動力門的使用安全.要求 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; German version EN 12453:2000) |
| DIN EN 12454-1998 |
鑄造.表面缺陷的目測檢驗.鋼砂鑄件 |
(Founding - Visual examination of surface discontinuities - Steel sand castings; German version EN 12454:1998) |
| DIN EN 12455-1999 |
彈性地板覆蓋物.軟木墊底層規范 |
(Resilient floor coverings - Specification for corkment underlay; German version EN 12455:1999) |
| DIN EN 12457-1-2003 |
廢棄物的表征.浸析.顆粒廢棄物和污泥浸析的一致性試驗.第1部分:粒徑小于4mm的材料在液體、固體比為2l/kg的 |
(Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002 |
| DIN EN 12457-2-2003 |
廢棄物的表征.浸析.顆粒廢棄物和污泥浸析的一致性試驗.第2部分:粒徑小于4mm的材料在液體、固體比為10l/kg的 |
(Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002 |
| DIN EN 12457-3-2003 |
廢棄物的表征.浸析.顆粒廢棄物和污泥浸析的一致性試驗.第3部分:高固體含量的粒徑小于4mm的材料在液體、固體 |
(Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm |
| DIN EN 12457-4-2003 |
廢棄物的表征.浸析.顆粒廢棄物和污泥浸析的一致性試驗.第4部分:粒徑小于10mm的材料在液體、固體比為10l/kg |
(Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size red |
| DIN EN 12458-1999 |
表面活性材料.耐硬水性能的測定 |
(Surface active agents - Determination of stability in hard water; German version EN 12458:1999) |
| DIN EN 1246-1998 |
膠粘劑.灰分含量和硫酸鹽灰分含量的測定 |
(Adhesives - Determination of ash and sulphated ash; German version EN 1246:1998) |
| DIN EN 12460-1998 |
生物技術.大比例工藝法和生產.與生物危險性相適應的儀器和裝備的選擇和安裝的指南 |
(Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk; German version EN 12460:1998) |
| DIN EN 12461-1998 |
生物技術.大比例工藝法和生產.廢料的搬運,鈍性化和檢驗的指南 |
(Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste; German version EN 12461:1998) |
| DIN EN 12462-1998 |
生物技術.泵的性能標準 |
(Biotechnology - Performance criteria for pumps; German version EN 12462:1998) |
| DIN EN 12463-2005 |
食品加工機械.填充和輔助機器.安全和衛生要求 |
|
| DIN EN 12464-1-2003 |
光和照明.工作場所照明.第1部分:戶內 |
(Light and lighting - Lighting of work places - Part 1: Indoor work places; German version EN 12464-1:2002) |
| DIN EN 12465-2002 |
架空線用木桿.耐久性要求 |
(Wood poles for overhead lines - Durability requirements; German version EN 12465:2001) |
| DIN EN 12466-1998 |
彈性地板鋪面.術語 |
(Resilient floor coverings - Vocabulary; German version EN 12466:1998) |
| DIN EN 12467 Berichtigung 1-2001 |
DINEN12467:2000-09的勘誤 |
(Corrigendum to DIN EN 12467:2000-09 (EN 12467:2000/AC:2000)) |
| DIN EN 12467-2000 |
纖維水泥平板材.產品規范和試驗方法 |
(Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000) |
| DIN EN 12468-1998 |
生物技術.置于環境中的變異有機物.在有目的的釋放遺傳變異植物的情況下監測策略指南 |
(Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants; German version EN 12468:1997) |
| DIN EN 12469-2000 |
生物技術.微生物安全箱的性能標準 |
(Biotechnology - Performance criteria for microbiological safety cabinets; German version EN 12469:2000) |
| DIN EN 1247-2004 |
鑄造機械.戽斗、澆注設備、離心鑄造機、連續和半連續鑄造機的安全要求 |
|
| DIN EN 12470-1-2000 |
體溫計.第1部分:大刻度的玻璃內有金屬液體的溫度計 |
(Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; German version EN 12470-1:2000) |
| DIN EN 12470-2-2001 |
體溫計.第2部分:相位變換式體溫計 |
(Clinical thermometers - Part 2: Phase change-type (dot matrix) thermometers; German version EN 12470-2:2000) |
| DIN EN 12470-3-2000 |
體溫計.第3部分:大刻度的小型電測溫度計的性能(可預測和不可預測的) |
(Clinical thermometers - Part 3: Performance of compact electrical thermometers (predictive and non-predictive) with maximum device; German version EN 12470-3:2000) |
| DIN EN 12470-4-2001 |
體溫計.第4部分:連續測量用電子體溫計的性能 |
(Clinical thermometers - Part 4: Performance of electrical thermometers for continous measurement; German version EN 12470-4:2000) |
| DIN EN 12470-5-2003 |
體溫計.第5部分:(大刻度的)耳蝸式紅外測溫計的性能 |
(Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device); German version EN 12470-5:2003) |
| DIN EN 12472-1999 |
驗證預涂層物件的鎳釋放用模擬磨損檢驗和腐蝕檢驗 |
(Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:1998) |
| DIN EN 12473-2000 |
海水中陰極保護的一般原理 |
(General principles of cathodic protection in sea water; German version EN 12473:2000) |
| DIN EN 12474-2001 |
海底管道的陰極保護 |
(Cathodic protection for submarine pipelines; German version EN 12474:2001) |
| DIN EN 12475-1-1998 |
密封成形的耐火產品的分級.第1部分:鋁-硅酸鹽-產品 |
(Classification of dense shaped refractory products - Part 1: Alumina-silica products; German version EN 12475-1:1998) |
| DIN EN 12475-2-1998 |
密封成形的耐火產品的分級.第2部分:具有物質成份小于7%的殘余碳的基礎產品 |
(Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon; German version EN 12475-2:1998) |
| DIN EN 12475-3-1998 |
密封成形的耐火產品的分級.第3部分:具有物質成份7%至30%的殘余碳的基礎產品 |
(Classification of dense shaped refractory products - Part 3: Basic products containing 7 % to 30 % residual carbon; German version EN 12475-3:1998) |
| DIN EN 12475-4-1999 |
密封成形的耐火產品的分級.第4部分:特殊產品 |
(Classification of dense shaped refractory products - Part 4: Special products; German version EN 12475-4:1998) |
| DIN EN 12476-2001 |
金屬的磷酸鹽轉化涂層.特殊要求的方法 |
(Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000) |
| DIN EN 12477-2002 |
焊工用防護手套 |
(Protective gloves for welders; German version EN 12477:2001) |
| DIN EN 12477-2005 |
焊工用防護手套 |
|
| DIN EN 12478-2001 |
機床的安全.大型數字控制的回轉機和回轉中心 |
(Safety of machine tools - Large numerically controlled turning machines and turning centres; German version EN 12478:2000) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com