標準號 |
中文名稱 |
英文名稱 |
| DIN 50982-3-1987 |
涂層厚度測量.一般工作原理.方法的選擇及測量的實施 |
(Principles of coating thickness measurement; selection criteria and basic measurement procedures) |
| DIN 50986-1979 |
涂層厚度測量.測量涂層及類似的涂覆層厚度的錐形剖面法 |
(Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings) |
| DIN 50988-2-1988 |
涂層厚度測量.測量從單位鋼鐵面上溶化的鋅.錫涂層金屬量容量分析法 |
(Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method) |
| DIN 50990-1993 |
層厚測量.用原子吸收光譜測量法金屬鍍層單位面積質量 |
(Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS) |
| DIN 50991-1997 |
電解涂層.鍍鉻槽用三氧化鉻.要求和檢驗 |
(Electroplated coatings - Chromtrioxide for chromium baths - Requirements and testing) |
| DIN 50992-1-2002 |
覆層厚度測量和有表面波的表面的表征.第1部分:激光感應超聲表面波法評定各層的彈性常數、質量密度和厚度 |
(Tickness measurement of coatings and characterising of surfaces with surface waves - Part 1: Evaluation of elastic constants, mass density and thickness of layers by laser-inducted ultrasonic surface waves) |
| DIN 50992-2-2002 |
覆層厚度測量和有表面波的表面的表征.第2部分:光熱法測量覆層厚度 |
(Tickness measurement of coatings and characterisation of surfaces with surface waves - Part 2: Thickness measurement of coatings by photothermic method) |
| DIN 50993-1-2005 |
腐蝕保護層中六價鉻的測定.第1部分:定性分析 |
|
| DIN 51001 Bb.1-2003 |
氧化原材料和基礎材料的試驗.X射線熒光法(XRF)工作的一般基礎.XRF試樣測定用材料組分解法的一般測量 |
(Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF) - General survey on disintegration methods referred to groups of materials for the determination of test specimens for XRF) |
| DIN 51001-1 Bb.1-1987 |
檢驗氧化原材料.X射線分析法(RFA).有關材料組分解程序 |
(Testing of oxidic materials; x-ray fluorescence method; disintegration methods referred to groups of materials) |
| DIN 51001-1-1983 |
對氧化原料及材料的檢驗.Ｘ射線熒光分析法(RFA).一般工作基礎 |
(Testing of oxidic materials; X-ray fluorescence method; general bases of work) |
| DIN 51001-2003 |
氧化原材料和基礎材料的檢驗.X射線熒光法的一般工作基礎 |
(Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF)) |
| DIN 51002-1-2004 |
電感耦合等離子體質譜法.第1部分:準則和定義 |
|
| DIN 51003-2004 |
全反射X-射線熒光.總則和定義 |
|
| DIN 51004-1994 |
熱分析(TA).用差值熱分析法(DTA)測定晶體材料的溶化溫度 |
(Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis) |
| DIN 51005-1993 |
熱分析(TA)概念 |
(Thermal analysis; terms) |
| DIN 51006-1990 |
熱分析(TA).熱解重量分析法(TG).原理 |
(Thermal analysis; thermogravimetry; principles) |
| DIN 51006-2005 |
熱分析(TA).熱解重量分析法(TG).原理 |
|
| DIN 51006-2005 |
熱分析(TA).熱解重量分析法(TG).原理 |
|
| DIN 51007-1994 |
熱分析(TA).差值熱分析(DTA).原理 |
(Thermal analysis; differential thermal analysis; principles) |
| DIN 51008-1 Bb.1-2004 |
發射光譜測定分析(OES).第1部分:火花和低壓放電系統術語.解釋 |
|
| DIN 51008-1-2004 |
發射光譜測定分析(OES).火花和低壓放電系統術語 |
|
| DIN 51008-2-2001 |
發射光譜測定分析(OES).第2部分:火焰和等離子系統用術語 |
(Optical Emission Spectrometry (OES) - Part 2: Terms for flame and plasma systems) |
| DIN 51009-2001 |
光學原子光譜分析.原理和定義 |
(Optical atomic spectral analysis - Principles and definitions) |
| DIN 51010-1-1987 |
陶瓷原材料的檢驗；未成型耐火制品；交貨檢驗 |
(Testing of ceramic materials; unshaped refractory materials; testing of materials as supplied) |
| DIN 51010-2-1987 |
陶瓷原材料的檢驗；未成型耐火制品；試樣的制造 |
(Testing of ceramic materials; unshaped refractory materials; preparation of test pieces) |
| DIN 51010-3-1987 |
陶瓷原材料的檢驗；未成型耐火制品；室溫下未焙燒試樣性能特征的檢驗 |
(Testing of ceramic materials; unshaped refractory materials; testing of the characteristics of unfired test pieces at room temperature) |
| DIN 51010-4-1987 |
陶瓷原材料的檢驗.未成型耐火制品.正在焙燒或焙燒后的試件性能特征的檢驗 |
(Testing of ceramic materials; unshaped refractory materials; testing of the characteristics of test pieces during or after firing) |
| DIN 51028-1998 |
防空洞通風用濾砂的檢驗.氣流阻力的測定 |
(Testing of filter sands for air-raid shelter ventilation - Determination of flow resistance) |
| DIN 51030-1954 |
陶瓷原材料的檢驗.干燥彎曲強度的測定 |
(Testing of ceramic raw materials and materials; determination of the dry bending strength) |
| DIN 51032-1986 |
陶瓷.玻璃.玻璃陶瓷.搪瓷.日用品中鉛和鎘逸出量的極限值 |
(Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs) |
| DIN 51043-1979 |
粗面凝灰?guī)r.要求.試驗 |
(Trass; Requirements, Tests) |
| DIN 51045-1-1989 |
在熱作用下固體長度變化的測定.原理 |
(Determination of the thermal expansion of solids; principless) |
| DIN 51045-2-1976 |
在熱作用下固體長度變化的測定.焙燒的細陶瓷材料的檢驗 |
(Determination of the change of length of solids by thermal effect; testing of fired fine ceramic materials) |
| DIN 51045-3-1976 |
在熱作用下固體長度變化的測定.未焙燒的細陶瓷材料的檢驗 |
(Determination of the change of length of solids by thermal effect; testing of non-fired fine ceramic materials) |
| DIN 51045-4-1976 |
在熱作用下固體長度變化的測定.焙燒過的粗陶瓷材料的檢驗 |
(Determination of the change of length of solids by thermal effect; testing of fired ordinary ceramic materials) |
| DIN 51045-5-1976 |
在熱作用下固體長度變化的測定.未焙燒的粗陶瓷材料的檢驗 |
(Determination of the change of length of solids by thermal effect; testing of non-fired ordinary ceramic materials) |
| DIN 51050-2000 |
密度成型耐火產品的試驗方法.化學法粘合的堿性磚中間層的冷擠壓強度的測定 |
(Methods for tests for dense shaped refractory products - Determination of cold crushing strength of the intermediate zone of chemically bonded basic bricks) |
| DIN 51060-2000 |
耐火陶瓷原材料和耐火產品.耐火術語的定義,高耐火性 |
(Refractory ceramic raw materials and refractories - Definitions of the terms refractory, high refractory) |
| DIN 51061-2-1978 |
陶瓷原材料的檢驗.取樣.陶瓷原料和未成型耐火制品 |
(Testing of ceramic raw and finished materials; sampling, ceramic raw materials and unshaped refractory products) |
| DIN 51061-2-2004 |
陶瓷原材料和成品的檢驗.第2部分:陶瓷原材料的抽樣 |
|
| DIN 51061-3-1973 |
陶瓷原材料的檢驗；取樣.耐火磚 |
(Testing of ceramic raw and finished materials; sampling, refractory bricks) |
| DIN 51064-1981 |
陶瓷原材料和半成品材料的檢驗.耐火磚加壓耐火性(DFB)的測定 |
(Testing of ceramic raw and semi-finished materials; determination of fire resistance of refractory bricks under load (DFB)) |
| DIN 51068-1-1976 |
陶瓷原材料的試驗.用耐火磚水激冷法測定熱沖擊抗力 |
(Testing of ceramic materials; Determination of Resistance to Thermal Shock; Water quenching method for refractory bricks) |
| DIN 51069-2-1972 |
陶磁原料和材料檢驗.高溫下抗固體和體物質侵蝕的防火材料的比較檢驗.坩堝法 |
(Testing of ceramic materials; comparing test of the resistance of refractory bricks to the attack of solid and liquid materials at high temperature, crucible method) |
| DIN 5107-1992 |
鍛工鑿.冷鑿 |
(Blacksmith` chisels (cold chisels)) |
| DIN 51074-1-1971 |
陶瓷原材料的檢驗.含氧化鉻的陶瓷原材料的化學分析.一般數據和檢驗報告 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, general instructions and test report) |
| DIN 51074-2-1971 |
陶瓷原材料的檢驗.用增溶法和氧化硅測定法對含氧化鉻的陶瓷原材料進行化學分析 |
(Testing of ceramic material; chemical analysis of ceramic materials containing chromium oxide, methods of dissolution) |
| DIN 51074-3-1971 |
陶瓷原材料的檢驗.用氧化鉻測定法對含氧化鉻的陶瓷原材料進行化學分析 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of chromic oxide) |
| DIN 51074-4-1971 |
陶瓷原材料的檢驗.用氧化鈣測定法對含氧化鉻的陶瓷原材料進行化學分析 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of calcium oxide) |
| DIN 51075-1-1982 |
陶瓷原材料的檢驗.碳化硅的化學分析.試樣的制備.碳化硅含量的計算.檢驗報告 |
(Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content) |
| DIN 51075-2-1984 |
陶瓷原材料的檢驗.碳化硅的化學分析.游離碳含量的直接測定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content) |
| DIN 51075-3-1982 |
陶瓷原材料的檢驗.碳化硅的化學分析.總含碳量的測定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content) |
| DIN 51075-4-1982 |
陶瓷原材料的檢驗.碳化硅的化學分析.游離硅含量的測定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; determination of the free silicon content) |
| DIN 51075-5-1982 |
陶瓷原材料的檢驗.碳化硅的化學分析.游離碳含量的直接測定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content) |
| DIN 51076-1-1991 |
陶瓷原材料的檢驗.作為原材料的主要成份或次要成份的碳化硅的化學分析.用氧化成份和連接材料測量原料中碳化 |
(Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials) |
| DIN 51078-2002 |
陶瓷原材料和材料的檢驗.干燥時物質改變測定用試樣制備和化學分析用試樣制備 |
(Testing of ceramic raw materials and materials - Preparation of samples for the determination of change of mass during drying and for chemical analysis) |
| DIN 51079-1-1991 |
陶瓷原材料的檢驗.作為原材料成份的碳化硅的化學分析.用碳酸鈉和硼酸溶解 |
(Testing of ceramic materials; chemical analysis of silicon carbide used as raw material and as constituent in materials; decomposition with sodium carbonate and boric acid) |
| DIN 51079-1-2004 |
陶瓷材料的檢驗.作為原材料和材料成分的碳化硅的化學分析.第1部分:用碳酸鈉和硼酸分解 |
|
| DIN 51079-2-1998 |
陶瓷原材料的檢驗.作為原材料和材料成份的碳化硅的化學分析.第2部分:用酸進行的壓力分解 |
(Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid) |
| DIN 51079-2-2004 |
陶瓷材料的檢驗.作為原材料和材料成分的碳化硅的化學分析.第2部分:用酸進行的壓力分解 |
|
| DIN 5108-1992 |
泥瓦工用錘 |
(Masons` hammers) |
| DIN 51081-2002 |
氧化原料和材料的檢驗.燃燒時的質量變化 |
(Testing of oxidic raw materials and materials - Determination of change in mass on ignition) |
| DIN 51082-2003 |
陶瓷原材料和陶瓷材料的測試.不溶解粉末的懸浮液pH值的測定 |
(Testing of ceramic raw materials and ceramic materials - Determination of pH value of suspensions of non-soluble powders) |
| DIN 51083-1-1998 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.一般數據和檢驗報告 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 1: General requirements, test report) |
| DIN 51083-10-1988 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.鈉氧化物.鉀氧化物和鋰氧化物的測定 |
(Testing of ceramic materials; chemical analysis of alumosilicates used for ceramics; determination of sodium oxide; potassium oxide and lithium oxide content) |
| DIN 51083-11-1996 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.第11部分:用原子吸收光譜法測定氧化鋇(BaO)和氧化鍶(SrO) |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 11: Determination of the barium oxide (BaO) and the strontium oxide (SrO) content by atomic absorption spectroscopy) |
| DIN 51083-2-2000 |
陶瓷原材料的檢驗.第2部分:硅酸鋁的化學分析.二氧化硅的測定 |
(Testing of ceramic materials - Part 2: Chemical analysis of alumosilicates, determination of silicium(IV)-oxide) |
| DIN 51083-3-1992 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.分解法 |
(Testing of ceramic materials; chemical analysis of alumosilicates; decomposition methods) |
| DIN 51083-3-2004 |
陶瓷材料的檢驗.硅酸鋁的化學分析.第3部分:分解法 |
|
| DIN 51083-4-1995 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.第4部分:氧化鋁的測定 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 4: Determination of alumina) |
| DIN 51083-4-2005 |
陶瓷原材料試驗.鋁硅酸鹽的化學分析.第4部分:鋁土的測定 |
|
| DIN 51083-5-2003 |
陶瓷材料的檢驗.硅酸鋁的化學分析.第5部分:二氧化鈦的測定 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 5: Determination of titanium oxide) |
| DIN 51083-6-1992 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.用原子吸收光譜法測定鐵和錳的總含量 |
(Testing of ceramic materials; chemical analysis of alumosilicates; determination of the iron and manganese content by atomic absorption spectrometry) |
| DIN 51083-7-2002 |
陶瓷原料和材料的檢驗.鋁硅酸鹽的化學分析.第7部分:氧化鈣(CaO)的測定 |
(Testing of ceramic raw materials and materials - Chemical analysis of alumosilicates - Part 7: Determination of calcium oxide (CaO)) |
| DIN 51083-8-1997 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.第8部分:用原子吸收光譜法測定氧化鎂 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 8: Determination of magnesium oxide (MgO) by atomic absorption spectrometry) |
| DIN 51083-9-1990 |
陶瓷原材料的檢驗.細陶瓷硅酸鋁的化學分析.氧化磷釩的光度測定 |
(Testing of ceramic materials; chemical analysis of alumosilicates; photometric determination of the phosphorus-V-oxid content) |
| DIN 51084-1990 |
陶瓷.玻璃.釉用氧化原材料的檢驗.氟化物含量的測定 |
(Testing of oxidic raw materials for ceramic, glass and glazes; determination of fluoride content) |
| DIN 51085-1997 |
氧化原料和材料的檢驗.總體硫含量的測定 |
(Testing of oxidic raw materials and materials - Determination of total sulfur content) |
| DIN 51086-1-1998 |
氧化原材料和塌陶瓷材料的試驗,玻璃和釉料,第1部分:氧化硼的測定 |
(Testing of oxidic raw materials and materials for ceramics, glass and glazes - Part 1: Determination of boric oxide) |
| DIN 51086-2-2004 |
氧化原材料及陶瓷、玻璃和釉料用材料的試驗.用感應耦合等離子體光學發射光譜法測定Ag、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cu、Er、Eu、Fe、La、Mg、Mn、Mo、Nd、Ni、P、Pb、Pr、S、Sb、Se、Sn、Sr、Ti、V、W、Y、Yb、Zn和Zr |
|
| DIN 51087-1-2005 |
氧化原料和成品試驗.第1部分:用鄰菲咯啉進行鐵(II)和鐵(III)的分光光度法測定 |
|
| DIN 5109-2000 |
細木工用錘 |
(Joiners` hammers) |
| DIN 51094-1996 |
陶瓷磚和陶磁板.墻面和地面鋪砌用瓷磚和瓷板色澤的耐光性試驗 |
(Ceramic tiles - Testing of the light fastness and colour fastness of ceramic tiles for walls and floors) |
| DIN 51097-1992 |
地板鋪面料檢驗.防滑性能測定.濕負荷的赤足范圍.踩踏法.斜面 |
(Testing of floor coverings; determination of the anti-slip properties; wet-loaded barefoot areas; walking method; ramp test) |
| DIN 51100-1957 |
陶瓷原材料的檢驗.用滲濾器法測定可溶性鹽 |
(Testing of ceramic raw materials and materials; determination of the soluble salts (percolator method)) |
| DIN 51102-1-1976 |
陶瓷原材料的檢驗.下水道陶瓷品塊狀試樣耐酸性的測定 |
(Testing of ceramic materials; determination of the acid resistance, method with lumpy test material for clay for severage) |
| DIN 51103-1975 |
陶瓷原材料的檢驗.耐堿性測定.粒化試件法 |
(Testing of ceramic materials; determination of the alkali resistance, method with grained test material) |
| DIN 5111-1990 |
2.5kg以下錘子的木錘柄 |
(Timber handles for hammers up to 2 kg) |
| DIN 51110-3-1993 |
高效陶瓷材料檢驗.4點彎曲試驗.靜態評估.威伯爾參數測定 |
(Testing of advanced technical ceramics; 4-point-bending test; statistical evaluation; determination of the Weibull-parameters) |
| DIN 5112-1990 |
2kg以上錘子的木錘柄 |
(Timber handles for hammers above 2 kg) |
| DIN 51130-1992 |
地板鋪面料檢驗.防滑性能測定.高滑跌危險的工作間和工作區.踩踏法.斜面 |
(Testing of floor coverings; determination of the anti-slip properties; workrooms and fields of activities with raised slip danger; walking method; ramp test) |
| DIN 51130-2004 |
地板覆蓋物的試驗.防滑性能測定.有滑跌危險的工作間和工作區.踩踏法.斜坡試驗 |
|
| DIN 5117-1992 |
快速螺紋夾鉗 |
(Quick adjustable screw clamps) |
| DIN 5117-2004 |
可調節的螺旋夾鉗 |
|
| DIN 51174-1988 |
搪瓷的檢驗.封閉系統腐蝕檢驗 |
(Corrosion testing of enamel in closed systems) |
| DIN 51175-2000 |
玻璃質釉和瓷釉.通過快速試驗法對熱機械性能的測定 |
(Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method) |
| DIN 51176-1-2003 |
�；麓珊吞麓�.缺陷的表示和特性.第1部分:化學行業和容器用瓷漆 |
(睼itreous and porcelain enamels - Presentation and characterisation of defects - Part 1: Enamels for chemical service and vessels) |
| DIN 51200-1985 |
材料試驗機.硬度檢驗儀的試樣夾緊裝置的設計和應用 |
(Materials testing machines; design and application of test piece holding devices in hardness testing machines) |
| DIN 51211-1978 |
金屬材料檢驗.金屬絲往復彎曲試驗 |
(Testing of Metallic Materials; Reverse Bend Test of Wires) |
| DIN 51212-1978 |
金屬材料檢驗；金屬絲的扭轉試驗 |
(Testing of Metallic Materials; Torsion Test of Wires) |
| DIN 51214-1977 |
鋼的檢驗.圓鋼絲接點的拉力試驗 |
(Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens) |
| DIN 51215-1975 |
金屬材料的檢驗；金屬絲的繞曲試驗.一般數據 |
(Testing of Metallic Materials; Wrapping Test for Wires; General Information) |
| DIN 51220-2003 |
材料試驗機.材料試驗機檢驗和校準的一般要求 |
(Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines) |
| DIN 51222-1995 |
金屬材料檢驗.額定工作能力 |
(Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy50 J and verification) |
| DIN 51230-1977 |
材料試驗機.測定小試樣彎曲強度及沖擊韌性用動力靜力儀 |
(Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens) |
| DIN 51231-1-2001 |
材料試驗機械.建筑構件的檢驗設備.第1部分:底板 |
(Material testing machines - Testing equipment for structural components - Part 1: Floor slabs) |
| DIN 5128-1971 |
橡膠錘 |
(Rubber-mallets) |
| DIN 51290-1-1991 |
機器制造業用反應性樹脂混凝土的檢驗.術語 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology) |
| DIN 51290-2-1991 |
機器制造業用反應性樹脂混凝土的檢驗.粘結劑.填充劑和可加工的混合劑的檢驗 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds) |
| DIN 51290-3-1991 |
機器制造業用反應性樹脂混凝土的檢驗.單獨制造的試樣的檢驗 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens) |
| DIN 51290-4-1991 |
機器制造業用反應性樹脂混凝土的檢驗.生產過程中和成品部件的檢驗 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts) |
| DIN 513-1-1985 |
米制鋸齒螺紋.螺紋牙型 |
(Metric buttress threads; thread profiles) |
| DIN 513-2-1985 |
米制鋸齒螺紋.螺紋系列 |
(Metric buttress threads; general plan) |
| DIN 513-3-1985 |
米制鋸齒螺紋.偏差和公差 |
(Metric buttress threads; deviations and tolerances) |
| DIN 5130-1974 |
銅錘 |
(Copper hammers) |
| DIN 51302-2-2000 |
材料試驗機.拉伸.加壓和彎曲試驗機的檢驗.建筑材料壓力試驗機的鉤檢驗 |
() |
| DIN 51308-1994 |
建筑業中施力裝置和力測量裝置的檢驗.夾緊裝置.液壓缸.夾緊測力計 |
(Verification of auxiliary devices for application and measuring of forces in building; clamp-devices, hydraulic cylinders, dynamometer for clamp aim) |
| DIN 51308-2005 |
建筑中應用和測量力用輔助裝置的驗證.夾緊裝置、液壓缸、夾緊工具用功率計 |
|
| DIN 51309-1998 |
材料試驗機械.靜扭矩測量裝置的校正 |
(Materials testing machines - Calibration of static torque measuring devices) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com