標準號 |
中文名稱 |
英文名稱 |
| DIN V 18998-2002 |
根據DINEN934系列評定混凝土外加劑腐蝕性 |
(Assessment corrosion behaviour of admixtures according the series DIN EN 934) |
| DIN V 18998/A1-2003 |
根據DINEN934系列評定混凝土外加劑腐蝕性.修改件A1 |
(Assessment corrosion behaviour of admixtures the series DIN EN 934; Amendment A1) |
| DIN V 19222-2001 |
控制技術.術語 |
(Control technology - Terminology) |
| DIN V 19224-2000 |
加工制造工業的電氣儀表和控制系統投產期間的重大事件與活動 |
(Milestones and activities during commissioning of elektrical instrumentation and control systems in the process industry (Text English)) |
| DIN V 19233-1998 |
控制技術.過程自動化.帶過程計算機系統的自動化,定義 |
(Control technology - Process automation - Automation with process computer systems, definitions) |
| DIN V 19247-1-2003 |
控制技術.工藝處理中氧氣添加裝置.第1部分:測量?jī)x表.一般要求和檢驗 |
(Control technology - Devices for oxygen service in the process-technique - Part 1: Instrumentation; General requirements and testings) |
| DIN V 19247-2-2003 |
控制技術.工藝處理中氧氣添加裝置.第2部分:測量?jī)x器和傳感器.一般要求和檢驗 |
(Control technology - Devices for oxygen service in the process-technique - Part 2: Measuring instruments and transmitters; General requirements and testings) |
| DIN V 19248-1999 |
確保部件壓力安全的強度過程測量與控制儀器試驗 |
(Control technology - Testing for process measurement and control equipment on strength to ensure pressure safety of parts) |
| DIN V 19249-2003 |
控制技術.非電氣驅動裝置、儀器和設備以及電氣驅動儀器的非電器零件的安全性.一般要求 |
(Control technology - Safety for non-electrically operated devices, equipment and systems, as well as non-electrically operated parts of electrical devices - General requirements) |
| DIN V 19250-1994 |
控制技術.MSR保護裝置的基本安全觀測 |
(Control technology; fundamental safety aspects to be considered for measurement and control equipment) |
| DIN V 19251-1995 |
控制技術.MSR保護裝置.保險功能的要求和措施 |
(Process control technology - MC protection equipment - Requirements and measures for safeguarded function) |
| DIN V 19256-1997 |
控制技術.工廠用工藝控制技術設備.設計,安裝及運行的指南 |
(Control technology - Equipment of process control technology (PCT) for industrial plants - Guidance for planning, installation and operation) |
| DIN V 19259-1996 |
設備文獻.工藝測量技術上帶模擬或數字輸出的測量裝置用帶分級圖的數據類型 |
(Documentation of devices - Data types with classification scheme for measuring equipment with analog or digital output for industrial process measurement) |
| DIN V 19259-2-1999 |
設備文獻.調節閥用帶分類示意圖的數據類型 |
(Documentation of devices - Standard data element types with associated classification for valves) |
| DIN V 19517-2002 |
排水管和污水管防噴射性測定的試驗方法 |
(Test methods for determination of the jetting resistance of drain and sewer pipes) |
| DIN V 19569-9-2001 |
廢水處理工廠.結構和技術設備設計原則.第9部分:污泥的機械排放 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge) |
| DIN V 19575-1995 |
乳化液分離設備.檢驗 |
(Emulsion splitting plants - Testing) |
| DIN V 19580-2003 |
車輛和人行區的排水通道.抗風化、單位面積的質量和第三方控制 |
(Drainage channels for vehicular and pedestrian areas - Weathering resistance, mass per unit area and third party control) |
| DIN V 19688-2001 |
土壤質量.預先壓實的土壤密實性測定 |
(Soil quality - Determination of compactibility of soils from the preconsolidation stress) |
| DIN V 19735-1999 |
土質.鹽水中從硝酸銨可萃取物或提取物中析出的素濃度 |
(Soil quality - Derivation of element concentrations in soil water from ammoniumnitrate extractable contents or eluate contents) |
| DIN V 19736-1998 |
土壤質量.地下水中有機物濃度推算 |
(Soil quality - Derivation of concentrations of organic pollutants in soil water) |
| DIN V 1999-7-1996 |
輕液體分離裝置.第7部分:無害分離清洗劑.要求.檢驗 |
(Installations for separation of light liquids - Part 7: Proseparate cleansing agents; requirements, testing) |
| DIN V 20000-1-2004 |
結構物中建筑產品的應用.第1部分:木基板材 |
(Application of construction products in structures - Part 1: Wood based panels) |
| DIN V 20000-1-2004 |
結構物中建筑產品的應用.第1部分:木基板材 |
|
| DIN V 20000-1-2004 |
結構物中建筑產品的應用.第1部分:木基板材 |
|
| DIN V 20000-1-2005 |
結構物中建筑產品的應用.第1部分:木基板材 |
|
| DIN V 20000-100-2002 |
建設中建筑物產品應用.第100部分:遵照DINEN934-2:2002-02的水泥含混物 |
(Application of building products in structures - Part 100: Concrete admixtures according DIN EN 934-2:2002-02) |
| DIN V 20000-101-2002 |
建設中建筑物產品應用.第101部分:遵照DINEN934-2:2002-02的預應力泥漿用含混劑 |
(Application of building products in structures - Part 101: Admixtures for grout for prestressing tendons according to DIN EN 934-4:2002-02) |
| DIN V 20000-102-2004 |
施工作業中建筑產品的使用.第102部分:符合DIN EN 13383-1-2002的集料 |
|
| DIN V 20000-103-2004 |
施工作業中建筑產品的使用.第103部分:符合DIN EN 12620-2003的集料 |
|
| DIN V 20000-104-2004 |
施工作業中建筑產品的使用.第104部分:符合DIN EN 13055-1:2002-08的輕質集料 |
|
| DIN V 20000-105-2004 |
建筑工程中建筑產品的使用.第105部分:依據DIN EN 13450-2003的集料 |
|
| DIN V 20000-401-2005 |
結構物中建筑產品的應用.第401部分:符合DIN EN 771-1-2005的粘土砌塊的應用規則 |
|
| DIN V 20000-402-2005 |
結構物中建筑產品的應用.第402部分:符合DIN EN 771-2-2005的硅酸鈣砌塊的應用規則 |
|
| DIN V 20000-403-2005 |
結構物中建筑產品的應用.第403部分:符合DIN EN 771-3-2005的集料混凝土砌塊的應用規則 |
|
| DIN V 20000-404-2005 |
結構物中建筑產品的應用.第404部分:符合DIN EN 771-4-2005的高壓蒸養加氣混凝土砌塊的應用規則 |
|
| DIN V 20000-412-2004 |
結構中建筑產品的應用.第412部分:符合DIN EN 998-2-2003的圬工灰漿的應用規則 |
|
| DIN V 2307-2003 |
與EN1792相關的焊接用術語和定義 |
(Terms and definitions for welding purposes in relation with EN 1792; Trilingual version CR 14599:2002) |
| DIN V 2308-2004 |
焊接.工作位置.現行國際、歐洲和美國的標識比較 |
|
| DIN V 24194-2-1985 |
通風設備管道部件.密封性.風道系統密封等級 |
(Ducting for ventilation equipment; air leckage classification of sheet metal ducting systems) |
| DIN V 27001-2001 |
RFID系統.消費品經濟的要求.RF日識別器 |
() |
| DIN V 30745-2003 |
用轉發器技術進行廢棄物容器的無線電射頻識別 |
(Radio-frequency identification of waste containers by transponder technology; text German and English) |
| DIN V 30995-1999 |
不包括硬金屬的燒結金屬材料.金相制備和檢驗 |
(Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)) |
| DIN V 32528-1999 |
高效陶瓷.氣體焊接設備.火焰加熱和相關工藝用工業手動和機動氧燃?xì)鈬娮?/td>
| (Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes (CR 13259:1998)) |
| DIN V 32538-2000 |
焊接.EN729的金屬材料熔焊質量要求的實施 |
(Welding - Implementation of EN 729 on quality requirements for fusion welding of metallic materials (CR 13576:1999)) |
| DIN V 32540-1997 |
激光束磨蝕.用激光束進行的熱磨蝕.定義,參數,實施 |
(Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure) |
| DIN V 3260-10-1999 |
封閉管道中水流量的測量.飲用冷水測量計.第10部分:規范 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 10: Specifications (ISO 4064-1:1993)) |
| DIN V 32879-1-1995 |
按渡越時間法光電子學測距.第1部分:不相參性渡越時間法 |
(Optoelectronic measurement of distance using time-of-flight principle - Part 1: Incoherent time-of-flight principle) |
| DIN V 32938-1998 |
用表面光度光學顯微法檢驗表面形狀.概念和測量方法 |
(Surface profiling by means of optical microscopic methods - Concepts and measurement procedures) |
| DIN V 32950-1997 |
幾何產品規范.總體規劃 |
(Geometrical product specification (GPS) - Masterplan (ISO/TR 14638:1995)) |
| DIN V 33901-2001 |
信息和文獻.文檔和圖書館資料的文件存儲要求 |
(Information and documentation - Document storage requirements for archive and library materials) |
| DIN V 38402-17-1988 |
德國對水.廢水和淤泥的統一檢驗法.一般說明(A組).液體物態中潮濕沉淀物取樣(A17) |
(German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of wet precipitation in liquid state (A 17)) |
| DIN V 38407-11-1995 |
德國對水、廢水和淤泥的標準檢驗法.可共同測定物質(F組).第11部分:用自動多次開發技術測定選出的有機植物處 |
(German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 11: Determination of selected organic plant protecting agents by Automated Multiple Development (AMD)-technique (F 11)) |
| DIN V 38408-24-1987 |
德國對水、廢水和淤泥的統一檢驗法.氣體含量(G組).自發性氧耗測定 |
(German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of the spontaneous oxygen depletion (G 24)) |
| DIN V 38411-10-2001 |
德國對水、廢水和淤泥的標準檢驗法.微生物法(K組)法.第10部分:體外丙氨酸氨基肽酶的測定 |
(German standard methods for the examination of water, waste water and sludge - Microbiological methods (group K) - Part 10: Determination of the in vivo alanine aminopeptidases activities (K 10)) |
| DIN V 4000-100-1994 |
事物特性表.特性數據的數據技術說明 |
(Tabular layouts of article characteristics description of data for characteristics) |
| DIN V 4000-101-1994 |
事物特性表.特性數據的數據技術說明.幾何數據處理規則 |
(Tabular layouts of article characteristics description of data for characteristics; rules for processing of geometric data) |
| DIN V 4000-104-1997 |
事物特性表.第104部分:明確的幾何學解釋用特性數據的數據技術說明 |
(Tabular layouts of article characteristics - Part 104: Technical description of characteristics data for explicit geometrical representation) |
| DIN V 4000-121-1998 |
夾緊緊固件或擴張緊固件用事物特性表.第121部分:平面緊固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 121: Surface clamps) |
| DIN V 4000-122-1998 |
夾緊緊固件或擴張緊固件用事物特性表.第122部分:線路緊固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 122: Clamps) |
| DIN V 4000-123-1998 |
夾緊緊固件或擴張緊固件用事物特性表.第123部分:端面緊固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 123: Profiled clamps) |
| DIN V 4000-124-1998 |
夾緊緊固件或擴張緊固件用事物特性表.第124部分:鎖緊緊固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 124: Fastening elements) |
| DIN V 4000-71-1992 |
傳感器事物特性表 |
(Tabular layouts of article characteristics for sensors) |
| DIN V 4000-79-1993 |
圖形符號的特性表 |
(Tabular layouts of article characteristics for graphical symbols) |
| DIN V 4001-11 Bb.1-1992 |
計算機輔助設計標準件文件.幾何和特性說明.帶柄的六角螺絲 |
(CAD standard parts library; specification of geometrie and parameters; hexagon head bolts) |
| DIN V 4001-11-1992 |
計算機輔助設計標準件文件.幾何和特性說明.用工具外驅動的平面頂部螺絲 |
(CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool) |
| DIN V 4001-12-1988 |
計算機輔助設計標準件文件.幾何和特性說明.沉頭螺釘 |
(CAD standard parts file; specification of geometry and parameters; countersunk head screws) |
| DIN V 4001-1401-1988 |
計算機輔助設計標準件文件.幾何和特性說明.螺栓連接和插接連接用線鼻子 |
(CAD standard parts file; specification of geometry and parameters; cable sockets for screw and snap connection) |
| DIN V 4001-15-1988 |
計算機輔助設計標準件文件.幾何和特性說明.平面平行和球狀墊片及環 |
(CAD standard parts file; specification of geometry and parameters; plane parallel and crowned washers and rings) |
| DIN V 4001-16-1987 |
計算機標準件文件.幾何和特性說明.全鉚釘和空心鉚釘 |
(CAD standard parts file; specification of geometry and parameters; full and tubular rivets) |
| DIN V 4001-1601-1990 |
計算機輔助設計標準件文件.幾何和特性說明.帶螺紋的鋼制管件 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings) |
| DIN V 4001-1608-1990 |
計算機輔助設計標準件文件.幾何和特性說明.帶螺紋鋼制管件 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings) |
| DIN V 4001-1611-1990 |
計算機輔助設計標準件文件.幾何和特性說明.帶螺紋的鋼制管件.彎頭 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings; bends) |
| DIN V 4001-17-1988 |
計算機輔助設計標準件文件.幾何和特性說明.配合鉚釘和盲鉚釘 |
(CAD standard parts file; specification of geometry and parameters; tolerance- and blind rivets) |
| DIN V 4001-2-1988 |
計算機輔助設計標準件文件.幾何和特性說明.A級幾何組件 |
(CAD standard parts file; specification of geometry and parameters; elements of geometry class A) |
| DIN V 4001-2/A1-1989 |
計算機輔助設計標準件文件.幾何和特性說明.A級幾何組件.修訂1 |
(CAD standard parts file; specification of geometry and parameters; elements of geometry class A; amendment 1) |
| DIN V 4001-2/A2-1990 |
計算機輔助設計標準件文件.幾何和特性說明.A級幾何結構組件 |
(CAD standard parts file; specifications of geometry and parameters; elements of geometry class A; amendment 2) |
| DIN V 4001-201-1990 |
計算機輔助設計標準件文件.幾何和特性說明.用工具內驅動平面頂部螺絲 |
(CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool) |
| DIN V 4001-202-1989 |
計算機輔助設計標準件文件.幾何和特性說明.用工具外驅動的平頭配合螺栓 |
(CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool) |
| DIN V 4001-204-1990 |
計算機輔助設計標準件文件.幾何和特性說明.用工具內驅動平面頂部配合螺絲 |
(CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool) |
| DIN V 4001-206-1991 |
計算機輔助設計標準件文件.幾何和特性說明.用特殊工具驅動的松動螺母 |
(CAD standard parts file; specification of geometry and parameters; nuts, separate, drive with special-tool) |
| DIN V 4001-207-1991 |
計算機輔助設計標準件文件.幾何和特性說明.螺桿.螺銷和桿式螺絲 |
(CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws) |
| DIN V 4001-27-1988 |
計算機標準件文件.幾何和特性說明.帶和不帶棱角的結構素,沉降和穿孔 |
(CAD standard parts file; specifications for geometry and parameters; counterbores and clearanceholes with and without chamfer) |
| DIN V 4001-29-1989 |
計算機輔助設計標準件文件.幾何和特性說明.工具驅動的松緊螺母 |
(CAD standard parts file; specifications of geometry and parameters; nuts, separate, with drive by tool) |
| DIN V 4001-302 Bb.1-1993 |
CAD標準文件.幾何和特性的設計值.齒形墊圈彈簧墊圈和錐形彈簧墊圈 |
(CAD standard parts library; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers) |
| DIN V 4001-302-1993 |
CAD標準件文件.幾何尺寸和特性數據.帶齒的波汶狀的和彈性墊圈 |
(CAD standard parts file; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers) |
| DIN V 4001-304-1992 |
CAD標準件數據.幾何尺寸和標記.楔型墊片 |
(CAD standard parts file; specifications of geometry and parameters; wedgeshaped washers) |
| DIN V 4001-306-1992 |
CAD標準件數據.幾何尺寸和標記規范.圓截面安全環 |
(CAD standard parts library; specifications of geometry and parameters; retaining rings with round cross-section) |
| DIN V 4001-40-1989 |
計算機輔助設計標準件文件.幾何和特性說明.結構素.中心孔 |
(CAD standard part file; specifications of geometry and parameters; formelements, center holes) |
| DIN V 4001-409-1990 |
計算機輔助設計標準件文件.幾何和特性說明.半成品.Z斷面 |
(CAD standard parts file; specification of geometry and parameters; semi-manufactured product, zeds-section) |
| DIN V 4001-901-1988 |
計算機輔助設計標準件文件.幾何和特性說明.帶臺階的螺栓 |
(CAD standard parts file; specification of geometry and parameters; bolts and pins with shoulders) |
| DIN V 4001-902-1988 |
計算機輔助設計標準文件.幾何和特性說明.螺栓和帶頭的銷釘 |
(CAD standard parts file; specification of geometry and parameters; bolts and pins with head) |
| DIN V 4001-903-1990 |
計算機輔助設計標準件文件.幾何和特性說明.無頭螺栓和銷釘 |
(CAD standard parts file; specifications of geometry and parameters; bolts and pins without head) |
| DIN V 4002-2-2003 |
產品數據交換用物品特性和參考分級結構.第2部分:術語和定義 |
(Article characteristics and reference hierarchy for the change of product datas - Part 2: Terms and definitions) |
| DIN V 4002-3-2002 |
產品數據交換特性和參考分級結構.第3部分:特性的分類結構和信息技術定義 |
(Properties and reference hierarchy for product data exchange - Part 3: Textural and information technological definition of the property attributes) |
| DIN V 4002-4-2003 |
產品數據交換物品特性和參考分級結構.第4部分:特性、物體和等級制定的術語規則 |
(Article characteristics and reference hierarchy for the exchange of product datas - Part 4: Terminological rules for the development of characteristics, objects and classes) |
| DIN V 4002-5-2002 |
產品數據交換特性和參考分級結構.第5部分:量示特性單位 |
(Properties and reference hierarchy for product data exchange - Part 5: Units for quantitative properties) |
| DIN V 4002-6-2003 |
產品數據交換用物品特性和參考分級結構.第6部分:物體等級結構的內容方面和信息-技術定義 |
(Characteristics and reference hierarchy to product data exchange - Part 6: Contentwise and information-technical definition of the structure of object classes) |
| DIN V 40046-36-1987 |
電工.基本環境檢驗法.Kx檢驗:電接觸和連接用二氧化硫SO2 |
(Electrical engineering; basic environmental testing procedures; test Kx: sulphur dioxide SO for electrical contacts and connections) |
| DIN V 40046-37-1987 |
電工.基本環境檢驗法.Ky檢驗:電接觸和連接用氫亞硫酸鹽(硫化氫)H2S |
(Electrical engineering; basic environmental testing procedures; test Ky: hydrogen sulphide HS for electrical contacts and connections) |
| DIN V 40102-1-2000 |
醫用圖形符號.第1部分:技術設備 |
(Graphical symbols for use on medical - Part 1: Technical equipment) |
| DIN V 40102-2-2000 |
家用電氣器具的圖形符號 |
(Graphical symbols for use on household appliances) |
| DIN V 40102-3-1998 |
電器技術專業圖標.通信 |
(Graphical symbols for use on communication equipment) |
| DIN V 4017-100 Bb.1-1996 |
地基.平面地基的抗基礎裂陷的計算.第100部分:按照帶部件安全系數的方案計算.計算實例 |
(Soil - Calculation of design bearing capacity of soil beneath shallow foundations - Part 100: Analysis in accordance with the partial safety factor concept - Calculation examples) |
| DIN V 4017-100-1996 |
地基.平面地基的抗基礎裂陷的計算.第100部分:按照帶部件安全系數的方案計算. |
(Soil - Calculation of design bearing capacity of soil beneath shallow foundations - Part 100: Analysis in accordance with the partial safety factor concept) |
| DIN V 4019-100-1996 |
地基.沉陷計算.第100部分:按照帶部件安全系數的方案計算. |
(Soil - Analysis of settlement - Part 100: Analysis in accordance with partial safety factor concept) |
| DIN V 4032-10-1991 |
混凝土管和管件.符合TGL26721/01.03.04的混凝土管制造和使用的過度條件 |
(Concrete pipes and fittings; transfer conditions for production and installation of concrete pipes referring to TGL 26721/01, 03 and 04) |
| DIN V 4034-1-2003 |
排水用未加筋的、鋼纖維和加筋的預制混凝土人孔.1型和2型.要求、試驗方法和合格評定 |
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity |
| DIN V 4034-1-2004 |
排水和污水用未加筋的、鋼纖維和加筋的預制混凝土人孔.1型和2型.第1部分:要求、試驗方法和合格評定 |
|
| DIN V 40719-1000-1993 |
電路圖,用計算機輔助設計的電路圖繪制的規范 |
Diagrams, charts, tables; rules for the computer-aided design of electrotechnical circuit diagrams |
| DIN V 4084-100 Bb.1-1997 |
地基.坡面斷口和路基斷口的計算.第100部分:按照帶部件安全系數的方案計算.計算實例 |
Soil - Calculation of slope and embankment failure and overall stability of retaining structures - Part 100: Analysis in accordance with the partial safety factor concept, calculation examples |
| DIN V 4084-100-1996 |
地基.坡面斷口和路基斷口的計算.第100部分:按照帶部件安全系數的方案計算 |
Soil - Calculation of slope and embankment failure and overall stability of retaining structures - Part 100: Analysis in accordance with the partial safety factor concept |
| DIN V 4085-100 Bb.1-1997 |
建筑地基.地壓計算.第100部分:根據帶有部分安全系數的方案計算.計算實例 |
Soil - Calculation of earth pressure - Part 100: Analysis in accordance with the partial safety factor concept; calculation examples |
| DIN V 4085-100-1996 |
地基.地壓計算.第100部分:按照帶部件安全系數的方案計算 |
(Soil - Calculation of earth-pressure - Part 100: Analysis in accordance with the partial safety factor concept) |
| DIN V 4108-10 Berichtigung 1-2004 |
對DIN V 4108-10-2004的勘誤 |
|
| DIN V 4108-10-2002 |
建筑物中隔熱和節能.熱絕緣材料的應用要求.第10部分:工廠制產品 |
(Thermal insulation and energy economy in buildings - Application-related requirements for thermal materials - Part 10: Factory made products) |
| DIN V 4108-10-2004 |
建筑物中隔熱和節能.熱絕緣材料的應用要求.第10部分:工廠制產品 |
|
| DIN V 4108-4-2002 |
建筑物中隔熱和節能.第4部分:溫濕性設計值 |
(Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values) |
| DIN V 4108-4-2004 |
建筑物中隔熱和節能.第4部分:溫濕設計值 |
|
| DIN V 4108-6 Berichtigung 1-2004 |
DIN V 4108-6-2003的勘誤 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com