標準號 |
中文名稱 |
英文名稱 |
| DIN ISO 7176-5-1992 |
輪椅.第5部分:輪廓尺寸.重量和旋轉空間的測定 |
(Wheelchairs - Determination of overall dimensions, mass and turning space; Identical with ISO 7176-5:1986) |
| DIN ISO 7176-6-1992 |
輪椅.電動輪椅最大速度、加速度及減速的測定 |
(Wheelchairs; Determination of maximum speed, acceleration and retardation of electric wheelchairs; Identical with ISO 7176-6:1988) |
| DIN ISO 7176-9-1992 |
輪椅.電動輪椅的耐氣候試驗 |
(Wheelchairs - Climatic tests for electric wheelchairs; Identical with ISO 7176-9:1988) |
| DIN ISO 718-1993 |
實驗室玻璃器皿.溫度驟變和耐溫度變性能.檢驗方法 |
(Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990) |
| DIN ISO 7181-2001 |
液壓傳動.液壓缸.缸筒和活塞桿截面比 |
(Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991)) |
| DIN ISO 7183-1990 |
壓縮空氣干燥機.規范和試驗 |
(Compressed air dryers; specifications and testing; identical with ISO 7183:1986) |
| DIN ISO 719-1989 |
玻璃.玻璃晶粒在98℃下的耐水解性.試驗方法和分類 |
(Glass; hydrolytic resistance of glass grains at 98 C; method of test and classification; identical with ISO 719:1985) |
| DIN ISO 7193-1994 |
輪椅.最大輪廓尺寸 |
(Wheelchairs - Maximum overall dimensions; Identical with ISO 7193:1985) |
| DIN ISO 720-1989 |
玻璃.玻璃晶粒在121℃下的耐水解性.試驗方法和分類 |
(Glass; Hydrolytic resistance of glass grains at 121 C; method of test and classification; identical with ISO 720:1985) |
| DIN ISO 724-1999 |
ISO一般用途米制螺紋.基本尺寸 |
(ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993)) |
| DIN ISO 7258-1987 |
航空和航天.聚四氟乙烯(PTFE)軟管.比重和相對比重的測定方法 |
(Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984) |
| DIN ISO 7299-1985 |
道路車輛.燃油噴射泵端面裝配的法蘭盤 |
(Road vehicles; end-mounting flanges for fuel injection pumps; identical with ISO 7299, edition 1984) |
| DIN ISO 730-1-1997 |
農業輪式拖拉機.尾部三點懸掛裝置.第1部分:1類,2類,3類和4類 |
(Agricultural machines and tractors - Rear-mounted three-point linkage - Part 1: Categories 1, 2, 3 and 4 (ISO 730-1:1994)) |
| DIN ISO 7312-1988 |
道路車輛.空氣過濾器連接.A型和B型 |
(Road vehicles; air filter connections; dimensions; identical with ISO 7312, edition 1984) |
| DIN ISO 7319-1996 |
航空和航天.流體動力系統.24度閉鎖錐形公制管螺文連接件的分支點 |
(Aerospace - Fluid systems - Interface of 24 cone metric couplings (ISO 7319:1992)) |
| DIN ISO 732-1994 |
攝影術.膠片尺寸.120和220尺寸 |
(Photography - Film dimensions - 120 and 220 sizes; identical with ISO 732:1991) |
| DIN ISO 7320-1996 |
航空和航天.流體動力系統用帶密封件的管接頭.尺寸 |
(Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions (ISO 7320:1992)) |
| DIN ISO 7331-1990 |
高山滑雪桿.安全要求和檢驗方法 |
(Ski-poles for alpine skiing; safety requirements and test methods; identical with ISO 7331:1990) |
| DIN ISO 7342-1984 |
道路車輛.故障判斷系統.點火系統試驗設備 |
(Road vehicles; diagnostic systems; equipment for ignition systems testing) |
| DIN ISO 7364-1985 |
造船.甲板機械.舷梯絞車 |
(Shipbuilding and marine structures; deck machinery; accommodation ladder winches; identical with ISO 7364, edition 1983) |
| DIN ISO 7368-1994 |
液壓傳動.二油口插裝式閥.腔室 |
(Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989) |
| DIN ISO 7401-1989 |
道路車輛.橫向瞬時靈敏度的試驗方法 |
(Road vehicles; lateral transient response test methods; identical with ISO 7401:1988) |
| DIN ISO 7425-1-1990 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.第1部分:活塞密封腔 |
(Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988) |
| DIN ISO 7425-2-1990 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.第2部分:活塞桿密封腔 |
(Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989) |
| DIN ISO 7437-1992 |
建筑制圖.預制結構件的生產圖紙的一般規則 |
(Construction drawings; general rules for execution of production drawings for prefabricated structural components; identical with ISO 7437:1990) |
| DIN ISO 7460-1988 |
造船數據處理.船體型線.幾何數據的標志 |
(Shipbuilding; information processing; shiplines; identification geometric data; identical with ISO 7460, edition 1983) |
| DIN ISO 7461-1988 |
造船數據處理.船體型線.船身各單幾何形狀數字表示法 |
(Shipbuilding; information processing; shiplines; numerical representation of elements of the hull geometry; identical with ISO 7461, edition 1984) |
| DIN ISO 7465-2003 |
乘客電梯和服務電梯.電梯籠和配重的導軌.T型 |
(Passenger lifts and service lifts - Guide rails for lift cars and counterweights - T-type (ISO 7465:2001)) |
| DIN ISO 7467-1989 |
商用車輛和客車.交流發電機用圓柱軸端和輪轂 |
(Commercial vehicles and busses; cylindrical shaft ends and hubs for alternators; identical with ISO 7467:1987) |
| DIN ISO 7475-2004 |
機械振動.平衡機械.測站用防護罩和其它保護措施 |
|
| DIN ISO 7478-1989 |
信息處理系統.數據通信.多鏈路程序 |
(Data communication; multilink procedures; identical with ISO 7478:1987 (status as of 1989)) |
| DIN ISO 7503-1-1990 |
表面污染的評定.β發射器(最大β能量大于0.15MeV)和α發射器 |
(Evaluation of surface contamination; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters; identical with ISO 7503-1:1988) |
| DIN ISO 7503-2-1990 |
表面污染的測定.第2部分:氚的表面污染 |
(Evaluation of surface contamination; tritium surface contamination; identical with ISO 7503-2:1988) |
| DIN ISO 7506-1996 |
紡織機械和輔助裝置.提花機穿綜用綜框的標準號 |
(Textile machinery and accessories - Numbering of harnesses for drawing-in on Jacquard machines (ISO 7506, edition 1984 (stage 1992))) |
| DIN ISO 7518-1986 |
技術制圖.結構制圖.拆除和重建的簡化表示法 |
(Technical drawings; construction drawings; simplified representation of demolition and rebuilding; identical with ISO 7518, edition 1983) |
| DIN ISO 7519-1992 |
技術圖紙.施工用圖紙.布置圖和裝配圖晝法的一般原則 |
(Technical drawings; construction drawings; general principles of presentation for general arrangement and assembly drawings; identical with ISO 7519:1991) |
| DIN ISO 7546-1985 |
土方機械.裝載機和前裝式挖土機鏟斗.額定容量 |
(Earth-moving machinery; loader and front loading excavator buckets; volumetric ratings; identical with ISO 7554, edition 1983) |
| DIN ISO 7547-1990 |
船舶艙室的空氣調節和通風.設計條件和計算基礎 |
(Air-conditioning and ventilation of accommodation spaces on board ships; design conditions and basis of calculations; identical with ISO 7547:1985) |
| DIN ISO 7550-1992 |
實驗室玻璃器皿.一次性使用的微量移液管 |
(Laboratory glassware; disposable micropipettes; identical with ISO 7550:1985) |
| DIN ISO 7576-1992 |
道路車輛.壓燃式發動機的兩級燃油濾清器頂蓋.裝配和連接尺寸 |
(Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions; identical with ISO 7576:1990) |
| DIN ISO 7578-1988 |
道路車輛.罩型熱線點火塞.一般要求和試驗方法 |
(Road vehicles; sheat-type glow-plugs; general requirements and test methods; identical with ISO 7578, edition 1986) |
| DIN ISO 76 Bb.1-1994 |
滾動軸承.靜態承載量.ISO281/1:1977解釋 |
(Rolling bearings - Static load ratings - Explanatory notes to ISO 76; identical with ISO/TR 10657:1991) |
| DIN ISO 76-1988 |
滾動軸承.額定靜負荷 |
(Rolling bearings; static load ratings; identical with ISO 76:1987) |
| DIN ISO 7612-1996 |
柴油發動機.安裝直列式燃油噴射泵的基座 |
(Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions; identical with ISO 7612:1994) |
| DIN ISO 7625-1991 |
燒結金屬材料(不包括硬質合金).測定碳含量的化學分析用的樣品制備 |
(Sintered metal materials, excluding hardmetals; preparation of samples for chemical analysis for determination of carbon content; identical with ISO 7625:1983) |
| DIN ISO 7627-1-1991 |
硬質合金.火焰原子吸收光譜法的化學分析.第1部分:一般要求 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; general requirements; identical with ISO 7627-1:1983) |
| DIN ISO 7627-2-1991 |
硬質合金.火焰原子吸收光譜法的化學分析.第2部分:含量為0.001%-0.02%(m/m)(平均克分子)的鈣.鉀.鎂和鈉含量 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m); identical with ISO 7627-2:1983) |
| DIN ISO 7627-3-1991 |
硬質合金.火焰原子吸收光譜法的化學分析.第3部分:含量為0.01%-0.5%(m/m)(平均克分子)的鈷.鐵.錳和鎳含量的 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m); identical with ISO 7627-3:1983) |
| DIN ISO 7627-4-1991 |
硬質合金.火焰原子吸收光譜法的化學分析.第4部分:含量為0.01%—0.5%(m/m)(平均克分子)的鉬.鈦和釩含量的測 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m); identical with ISO 7627-4:1983) |
| DIN ISO 7627-5-1991 |
硬質合金.火焰原子吸收光譜法的化學分析.第5部分:含量為0.5%—2%(m/m)(平均克分子)的鈷.鐵.錳.鉬.鎳.鈦和釩 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m); identical with ISO 7627-5:1983) |
| DIN ISO 7627-6-1991 |
硬質合金.火焰原子吸收光譜法進行化學分析.第6部分:在0.0%-2%(m/m)范圍內的鉻含量的測定 |
(Hardmetals; chemical analysis by flame atomic absorption spectrometry; determination of chronium in contents from 0,01 to 2 % (m/m); identical with ISO 7627-6:1985) |
| DIN ISO 7632-1986 |
道路車輛.使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊圈(最大工作溫度120℃) |
(Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 C max.); identical with ISO 7632, edition 1985) |
| DIN ISO 7636-1986 |
自行車和輕便摩托車車鈴.技術規格 |
(Bells for bicycles and mopeds; requirements, testing; identical with ISO 7636, edition 1984) |
| DIN ISO 7637-3-1999 |
道路車輛.電導和耦合引起的電干擾.第3部分:標稱電源電壓12V或24V的車輛.通過電容耦合和電感耦合經由線不同 |
(Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage; Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines (ISO 7637-3:1995)) |
| DIN ISO 7638-1-2001 |
道路車輛.制動系統連接件.第1部分:24V標稱電源電壓用連接件 |
(Road vehicles - Electrical connectors for braking systems - Part 1: Connectors for 24 V nominal supply voltage (ISO 7638-1:1997)) |
| DIN ISO 7638-2-2001 |
道路車輛.制動系統連接件.第2部分:12V標稱電源電壓用連接件 |
(Road vehicles - Electrical connectors for braking systems - Part 2: Connectors for 12 V nominal supply voltage (ISO 7638-2:1997)) |
| DIN ISO 7646-1987 |
商業用車輛和公共汽車.齒輪箱法蘭.A型 |
(Commercial vehicles and buses; gearbox flanges; type A; identical with ISO 7646, edition 1986) |
| DIN ISO 7647-1987 |
商業用車輛和公共汽車.齒輪箱法蘭.S型 |
(Commercial vehicles and buses; gearbox flanges; type S; identical with ISO 7647, edition 1986) |
| DIN ISO 7648-1988 |
往復式內燃機.飛輪殼.尺寸 |
(Flywheel housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7648:1987) |
| DIN ISO 7649-1992 |
往復式內燃機.離合器殼體.尺寸 |
(Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7649:1991) |
| DIN ISO 7650-1992 |
工業用車輛和公共汽車.起動電機.1、2、3和4型裝配尺寸 |
(Commercial vehicles and buses; mounting dimensions for starter motors of types 1, 2, 3 and 4; identical with ISO 7650:1987) |
| DIN ISO 7651-1993 |
商用車輛和客車,1.2.3型交流發電機安裝尺寸 |
(Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3; identical with ISO 7651:1991) |
| DIN ISO 7652-1985 |
道路車輛.單缸三角皮帶傳動基座安裝的空氣壓縮機.連接尺寸 |
(Road vehicles; base-mounted air compressors, single cylinder V-belt drive; mounting dimensions) |
| DIN ISO 7653-1986 |
道路車輛.商業用車輛.動力輸出裝置(PTO)和輔助傳動機組之間的離合器 |
(Road vehicles, commercial vehicles; couplings between power take-offs and ancillary driven units; identical with ISO 7653, edition 1985 (status as of 1986)) |
| DIN ISO 7654-2002 |
道路車輛.柴油發動機燃油過濾器.裝配和連接尺寸 |
(Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions (ISO 7654:1998)) |
| DIN ISO 7706-1987 |
道路車輛.商業用車輛.動力輸出裝置(PTO)和動力輸出端空位 |
(Road vehicles; commercial vehicles; clearance envelope for power take-offs; identical with ISO 7706, edition 1985) |
| DIN ISO 7708-1996 |
空氣質量.涉及建康的懸浮灰塵抽樣用粒度分布規定 |
(Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)) |
| DIN ISO 7736-1985 |
道路車輛.前端安裝的汽車無線電接收機.包括連接裝置的裝配空間 |
(Road vehicles; car radio for front installation; installation space including connection) |
| DIN ISO 7743-1993 |
彈性體或墊塑彈性體壓縮變形性能測定 |
(Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties; identical with ISO 7743:1989 (status of 1990)) |
| DIN ISO 7747-1984 |
道路車輛.全流式潤滑油濾清器的構件.尺寸 |
(Road vehicles; filter elements for full flow oil filters; dimensions) |
| DIN ISO 7753-1991 |
核能.臨界狀態探測和報警系統的性能和檢驗的要求 |
(Nuclear energy; performance and testing requirements for criticality detection and alarm systems; identical with ISO 7753:1987) |
| DIN ISO 7794-1992 |
越野雪橇.雪橇緊固螺釘.要求 |
(Cross-country skis; ski binding screws; requirements; identical with ISO 7794:1991) |
| DIN ISO 7795-1995 |
越野雪橇.雪橇緊固螺釘.檢驗 |
(Cross-country skis - Ski binding screwsTest methods; identical with ISO 7795:1994) |
| DIN ISO 7796-1986 |
雪橇.幾何形狀.測量條件 |
(Skis; geometry; measuring conditions; identical with ISO 7796, edition 1985) |
| DIN ISO 7797-1986 |
越野雪橇.準靜態載荷斷裂斷裂力和彎曲值的測定 |
(Cross country skis; determination of breaking load and deflection at break with quasistatic load; identical with ISO 7797, edition 1985) |
| DIN ISO 7798-1985 |
越野雪橇.疲勞指標的測定.周期性載荷試驗 |
(Cross-country skis; determination of fatigue indexes; cyclic loading test) |
| DIN ISO 7803-1995 |
工業用道路車輛.轉向球接頭 |
(Commercial road vehicles - Steering ball joints; identical with ISO 7803:1987) |
| DIN ISO 7804-1987 |
商業用道路車輛.載重汽車動力輸出裝置的側口 |
(Commercial road vehicles; side openings for truck power take-offs; identical with ISO 7804, edition 1985) |
| DIN ISO 7838-1988 |
造船數據處理.船體型線.數據格式和組編 |
(Shipbuilding; information processing; shiplines; formats and data organization; identical with ISO 7838, edition 1984) |
| DIN ISO 7839-1988 |
紡織機械和輔助裝置.針織機.分類和術語 |
(Textile machinery and accessories; knitting machines; classification and vocabulary; identical with ISO 7839, edition 1984) |
| DIN ISO 787-10-1983 |
顏料和填充劑的一般試驗方法.第10部分:濃度的測定.比重瓶法 |
(General methods of test for pigments and extenders; part 10: determination of density; pyknometer method) |
| DIN ISO 787-11-1983 |
顏料和填充劑的一般試驗方法.第11部分:壓實后壓實容積和表觀密度的測定 |
(General methods of test for pigments and extenders; part 11: determination of tamped volume and apparent density after tamping) |
| DIN ISO 787-15-1988 |
顏料和填充劑的一般試驗方法.第15部分:同類著色顏料耐光性的比較 |
(General methods of test for pigments and extenders; comparison of resistance to light of coloured pigments of similar types; identical with ISO 787/15, edition 1986) |
| DIN ISO 787-16-1988 |
顏料和填充劑的一般試驗方法.第16部分:相對著色力(或等數著色值)的測定和著色顏料還原后的顏色目視比較法 |
(General methods of test for pigments and extenders; determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments; visual comparison method; identical with ISO 787/16, edition 1986) |
| DIN ISO 787-18-1984 |
顏料和填充劑的一般試驗方法.第18部分:篩渣的測定.機械沖洗步驟 |
(General methods of test for pigments and extenders; determination of residue on sieve; mechanical flushing procedure) |
| DIN ISO 787-24-1986 |
顏料和填充劑的一般試驗方法.第24部分:著色顏料的相對著色力和白色顏料的相對散射力的測定.光度法 |
(General methods of test for pigments and extenders; determination of relative tinting strength of coloured pigments and relative scattering power of white pigments; photometric methods; identical with ISO 787/24, edition 1985) |
| DIN ISO 787-4-1983 |
顏料和填充劑的一般試驗方法.第4部分:水萃取酸度或堿度的測定 |
(General methods of test for pigments and extenders; part 4: determination of acidity or alkalinity of the aqueous extract) |
| DIN ISO 787-5-1983 |
顏料和填充劑的一般試驗方法.第4部分:吸油值的測定 |
(General methods of test for pigments and extenders; part 5: determination of oil absorption value) |
| DIN ISO 7876-1-1993 |
柴油機.燃料噴射泵.術語 |
(Fuel injection equipment; vocabulary; part 1: fuel injection pumps; identical with ISO 7876-1:1990) |
| DIN ISO 7876-2-1994 |
柴油機.燃料噴射泵裝置.詞匯.第2部分:燃油噴嘴 |
(Fuel injection equipment; vocabulary; part 2: fuel injectors; identical with ISO 7876-2:1991) |
| DIN ISO 7876-3-1995 |
燃料噴射泵裝置.詞匯.第3部分:組合式噴射器 |
(Fuel injection equipment - Vocabulary - Part 3: Unit injectors; identical with ISO 7876-3:1993) |
| DIN ISO 7879-1992 |
道路車輛.托架安裝直列柱塞燃料泵.安裝尺寸 |
(Road vehicles; cradle-mounted in-line fuel injection pumps; mounting dimensions; identical with ISO 7879:1990) |
| DIN ISO 7880-1985 |
道路車輛.繼電器.繼電器終端的配置和功能特性 |
(Road vehicles; relays; arrangement and functional attributation of relay terminals; identical with ISO 7880 edition 1984) |
| DIN ISO 7884-1-1998 |
玻璃.粘度和粘滯固定點.第1部分:粘度和粘滯固定點的測定原理 |
(Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987)) |
| DIN ISO 7884-2-1998 |
玻璃.粘度和粘滯固定點.第2部分:用轉動粘度計測定粘度 |
(Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers) |
| DIN ISO 7884-3-1998 |
玻璃.粘度和粘滯固定點.第3部分:用纖維伸長粘度計測定粘度 |
(Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987)) |
| DIN ISO 7884-4-1998 |
玻璃.粘度和粘滯固定點.第4部分:用射線彎曲法測定粘度 |
(Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987)) |
| DIN ISO 7884-5-1998 |
玻璃.粘度和粘滯固定點.第5部分:用浸沒桿式粘度計測定工作點 |
(Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987)) |
| DIN ISO 7884-6-1998 |
玻璃.粘度和粘滯固定點.第6部分:軟化點的測定 |
(Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point (ISO 7884-6:1987)) |
| DIN ISO 7884-7-1998 |
玻璃.粘度和粘滯固定點.第7部分:用射線彎曲法測定退火點和應變點 |
(Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)) |
| DIN ISO 7884-8-1998 |
玻璃.粘度和粘滯固定點.第8部分:(膨脹)變換溫度的測定 |
(Glass - Viscosity and viscometric fixed points - Part 8: Determination of (dilatometric) transformation temperature (ISO 7884-8:1987)) |
| DIN ISO 789-10-1999 |
拖拉機和農用機具.試驗程序.第10部分:機具用液壓功率傳送 |
(Agricultural tractors and machinery - Tractors; Test procedures - Part 10: Hydraulic pressure for implements (ISO 789-10:1996)) |
| DIN ISO 7905-1-1998 |
滑動軸承.軸承疲勞強度.第1部分:液體潤滑條件下在使用中和在試驗臺上的滑動軸承 |
(Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995)) |
| DIN ISO 7905-2-1998 |
滑動軸承.軸承疲勞強度.第2部分:用金屬軸承材料制圓柱形試棒作試驗 |
(Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1996)) |
| DIN ISO 7905-3-1998 |
滑動軸承.軸承疲勞強度.第3部分:金屬復合軸承材料制平條的檢驗 |
(Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)) |
| DIN ISO 7905-4-1998 |
滑動軸承.軸承疲勞強度.第4部分:金屬復合軸承材料制軸承套的檢驗 |
(Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)) |
| DIN ISO 7913-1986 |
航空和航天.緊固件.螺栓和螺釘?shù)男螤詈臀恢霉?/td>
| (Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985) |
| DIN ISO 7919-1-1997 |
除活塞式發動機外其它機器的機械振動.軸振動的測量和評定.第1部分:一般指南 |
(Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation - Part 1: General guidelines (ISO 7919-1:1996)) |
| DIN ISO 7919-2-2002 |
機械振動.通過在旋轉軸上測量的方法評定機械振動.第2部分:標定運行速度1500r/min、1800r/min、3000r/min和3 |
(Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2: |
| DIN ISO 7919-3-1997 |
除活塞式發動機外其它機器的機械振動.軸振動的測量和評定.第3部分:嚙合連接的工業機械 |
(Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines (ISO 7919-3:1996)) |
| DIN ISO 7919-4-1997 |
除活塞式發動機外其它機器的機械振動.軸振動的測量和評定.第4部分:燃?xì)廨啓C(jī)組 |
(Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets (ISO 7919-4:1996)) |
| DIN ISO 7919-5-2005 |
機械振動.通過旋轉軸上的測量評價機械振動.第5部分:水力發電廠和泵站機組 |
|
| DIN ISO 7931-1989 |
電阻焊設備的絕緣帽和套 |
(Insulation caps and bushes for resistance welding equipment; identical with ISO 7931:1985) |
| DIN ISO 7934-2000 |
固定污染源的排放.二氧化硫的質量濃度的測定.過氧化氫/高氯酸鋇/釷試劑法. |
(Stationary source emissions - Determination of the mass concentration of sulfur dioxide, hydrogen peroxide/bariumperchlorate/Thorin method; German version ISO 7934:1989 und ISO 7934:1989/AMD 1:1998) |
| DIN ISO 7967-1-1993 |
往復式內燃機.零件和系統和名稱.外罩 |
(Reciprocating internal combustion engines; vocabulary of components and systems; structure and external covers; identical with ISO 7967-1:1987) |
| DIN ISO 7967-2-1993 |
往復式內燃機.零件和系統的名稱.主運行機構 |
(Reciprocating internal combustion engines; vocabulary of components and systems; main running gear; identical with ISO 7967-2:1987) |
| DIN ISO 7967-3-1993 |
往復式內燃機.零件和系統的名稱.閥門,凸輪軸傳動裝置傳動機構 |
(Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987) |
| DIN ISO 7967-4-1993 |
往復式內燃機.零件和系統的名稱.增壓和空氣及排氣管道系統 |
(Reciprocating internal combustion engines; vocabulary of components and systems; pressure charging and air/exhaust gas ducting systems; identical with ISO 7967-4:1988) |
| DIN ISO 7967-8-1996 |
往復式內燃機.零件和系統詞匯.第8部分:起動系統 |
(Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems; identical with ISO 7967-8:1994) |
| DIN ISO 7975-1987 |
道路車輛.轉圈制動.開環試驗程序 |
(Road vehicles; braking in a turn; open loop test procedure; identical with ISO 7975, edition 1985) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com