標準號 |
中文名稱 |
英文名稱 |
| DIN EN 12147-1997 |
水果汁和蔬菜汁.可滴定酸值的測定 |
(Fruit and vegetable juices - Determination of titrable acidity; German version EN 12147:1996) |
| DIN EN 12148-1996 |
水果汁和蔬菜汁.柑橘汁中橙皮甙和柚皮甙的測定.高壓液相色譜法 |
(Fruit and vegetable juices - Determination of hesperidin and naringin in citrus juices - Method using high performance liquid chromatography; German version EN 12148:1996) |
| DIN EN 12149-1998 |
重金屬,某些其它可萃取素移動的測定,氯乙烯-單體含量及甲醛釋放的測定 |
(Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release; German version EN 12149:1997) |
| DIN EN 12150-1-2000 |
建筑物用玻璃.熱鋼化鈉鈣安全玻璃.第1部分:定義和描述 |
(Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 12150-1:2000) |
| DIN EN 12150-2-2005 |
建筑物用玻璃.熱鋼化鈉鈣安全玻璃.第2部分:合格評價/產品標準 |
|
| DIN EN 12152-2002 |
幕墻.透氣率.性能要求和分類 |
(Curtain walling - Air permeability - Performance requirements and classification; German version EN 12152:2002) |
| DIN EN 12153-2000 |
幕墻.透氣率.試驗方法 |
(Curtain walling - Air permeability - Test methods; German version EN 12153:2000) |
| DIN EN 12154-2000 |
幕墻.防水性.性能要求和分級 |
(Curtain walling - Watertightness - Performance requirements and classification; German version EN 12154:1999) |
| DIN EN 12155-2000 |
幕墻.防水性.靜態壓力下的實驗室試驗 |
(Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000) |
| DIN EN 12157-1999 |
離心泵.車床用冷卻泵組件.額定輸流量.尺寸 |
(Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions; German version EN 12157:1999) |
| DIN EN 12158-1-2001 |
貨物用建筑提升機.第1部分:帶易卸平臺的提升機 |
(Builders hoists for goods - Part 1: Hoists with accessible platforms; German version EN 12158-1:2000) |
| DIN EN 12158-2-2001 |
貨物用建筑提升機.第2部分:無易卸承載裝置的斜提升機 |
(Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices; German version EN 12158-2:2000) |
| DIN EN 12159-2001 |
帶垂直升降機箱的人和物料用建筑提升機 |
(Builders hoists for persons and materials with vertically guided cages; German version EN 12159:2000) |
| DIN EN 1216-2003 |
熱交換器.強制對流用空氣冷卻器和空氣加熱器.確定性能的試驗程序 |
(Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedure for establishing the performance (includes amendment A1:2002); German version EN 1216:1998 + A1:2002) |
| DIN EN 12162-2001 |
液體泵.安全要求.靜液壓試驗過程 |
(Liquid pumps - Safety requirements - Procedure for hydrostatic testing; German version EN 12162:2001) |
| DIN EN 12163-1998 |
銅和銅合金.一般用途的棒 |
(Copper and copper alloys - Rod for general purposes; German version EN 12163:1998) |
| DIN EN 12164-2000 |
銅和銅合金.切削加工用棒(包括修改件A1-2000) |
(Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); German version EN 12164:1998 + A1:2000) |
| DIN EN 12165-1998 |
銅和銅合金.已加工和未加工的鍛件 |
(Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:1998) |
| DIN EN 12166-1998 |
銅和銅合金.一般用途的線材 |
(Copper and copper alloys - Wire for general purposes; German version EN 12166:1998) |
| DIN EN 12167-1998 |
銅和銅合金.一般用途的型材和長方形棒材 |
(Copper and copper alloys - Profiles and rectangular bars for general purposes; German version EN 12167:1998) |
| DIN EN 12168-2000 |
銅和銅合金.切削加工用空心棒(包括修改件A1-2000) |
(Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); German version EN 12168:1998 + A1:2000) |
| DIN EN 1217-1998 |
與食品有關的材料和物品.陶瓷制品水吸收特性的試驗方法 |
(Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998) |
| DIN EN 12170-2002 |
建筑物內的加熱系統.操作、維護和使用方面的文件的制備規程.需要受過訓練的操作員的加熱系統 |
(Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator; German version EN 12170:2002) |
| DIN EN 12171-2002 |
建筑物中的加熱系統.運行,維護和使用的文件制備程序.無命令培訓操作人員的加熱系統 |
(Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator; German version EN 12171:2002) |
| DIN EN 12173-1998 |
飲用水處理用化合物.氟化鈉 |
(Chemicals used for treatment of water intended for human consumption - Sodium fluoride; German version EN 12173:1998) |
| DIN EN 12173-2005 |
人類生活用水處理用化學品.氟化鈉 |
|
| DIN EN 12174-2001 |
人類生活用水處理用化學品.六氟硅酸鈉 |
(Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate; German version EN 12174:2001) |
| DIN EN 12175-2001 |
人類生活用水處理用化學品.六氟硅酸 |
(Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acide; German version EN 12175:2001) |
| DIN EN 12176-1998 |
淤泥的特性表示.pH值測定 |
(Characterization of sludge - Determination of pH-value; German version EN 12176:1998) |
| DIN EN 12177-1998 |
液化礦物油制品.無鉛燃料.用氣體色譜法測定苯含量 |
(Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:1998) |
| DIN EN 12178-2004 |
制冷系統及熱泵.液位指示設備.要求、試驗和標記 |
|
| DIN EN 12179-2000 |
幕墻.抗風力載荷.試驗方法 |
(Curtain walling - Resistance to wind load - Test method; German version EN 12179:2000) |
| DIN EN 1218-1-1999 |
木材加工機械的安全性.開榫機.第1部分:帶滑動工作臺的單端頭開榫機 |
(Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table; German version EN 1218-1:1999) |
| DIN EN 1218-2-2004 |
木材加工機械的安全性.開榫機.第2部分:由鎖鏈傳送的雙端開榫和/或仿形機械 |
|
| DIN EN 1218-3-2002 |
木材加工機械的安全性.開榫機.第3部分:結構木材切割用帶滑動工作臺的手工喂料式開榫機 |
(Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers; German version EN 1218-3:2001) |
| DIN EN 1218-4-2004 |
木材加工機械的安全性.開榫機.第4部分:鏈?zhǔn)剿土线吘夎F條打捆機 |
|
| DIN EN 1218-5-2004 |
木材加工機械的安全性.開榫機.第5部分:帶固定式工作臺和送料輥或鏈?zhǔn)剿土系膯芜叿滦螜C(jī) |
|
| DIN EN 12180-2000 |
非活性外科植入物.身體外形修復用植入物.乳房植入物的特殊要求 |
(Non-active surgical implants - Body contouring implants - Specific requirements for mammary implants; German version EN 12180:2000) |
| DIN EN 12181-1998 |
口咽插管 |
(Oropharyngeal airways; German version EN 12181:1998) |
| DIN EN 12182-1999 |
殘疾人用技術輔助器具.一般要求和試驗方法 |
(Technical aids for disabled persons - General requirements and test methods; German version EN 12182:1999) |
| DIN EN 12183-1999 |
手動輪椅.要求和試驗方法 |
(Manually propelled wheelchairs - Requirements and test methods; German version EN 12183:1999) |
| DIN EN 12184-1999 |
電動輪椅、小型摩托車及其充電器.要求和試驗方法 |
(Electrically powered wheelchairs, scooters, and their charges - Requirements and test methods; German version EN 12184:1999) |
| DIN EN 12186-2000 |
燃?xì)夤⿷?yīng)系統.輸送和分配燃?xì)庥脷鈮赫{(diào)節站.功能要求 |
(Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements; German version EN 12186:2000) |
| DIN EN 12188-1999 |
混凝土支承結構的防護和維修用產品和系統.表示結構用膠粘劑性能的鋼上膠粘作用的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999) |
| DIN EN 12189-1999 |
混凝土支承結構的防護和維修用產品和系統.敞開時間的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999) |
| DIN EN 12190-1998 |
混凝土支承結構防護和維修用產品和系統.檢驗方法.維護灰漿抗壓強度的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998) |
| DIN EN 12192-1-2002 |
混凝土支承結構的防護和維修用產品和系統.粒度分析.第1部分:預混合泥漿干化合成份的檢驗方法 |
(Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002) |
| DIN EN 12192-2-1999 |
混凝土支承結構的防護和維修用產品和系統.粒度分析.第2部分;聚合物粘合劑用填料的檢驗方法 |
(Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999) |
| DIN EN 12193-1999 |
光及照明.運動照明 |
(Light and lighting - Sports lighting; German version EN 12193:1999) |
| DIN EN 12194-2000 |
外部和內部用遮簾.錯誤的使用.試驗方法 |
(Shutters, external and internal blinds - Misuse - Test methods; German version EN 12194:2000) |
| DIN EN 12195-1-2004 |
道路車輛上的裝載物固定裝置.安全.第1部分:捆綁力的計算 |
|
| DIN EN 12195-2-2001 |
道路車輛上的裝載物固定裝置.安全.第2部分:人造纖維制成的捆綁網 |
(Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; German version EN 12195-2:2000) |
| DIN EN 12195-3-2001 |
道路車輛上的裝載物固定裝置.安全.第3部分:捆綁鏈 |
(Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains; German version EN 12195-3:2001) |
| DIN EN 12195-4-2004 |
道路車輛上的裝載物固定裝置.安全.第4部分:捆綁用鋼絲繩 |
|
| DIN EN 12196-2003 |
體操器械.跳馬和鞍馬.功能要求和安全技術要求.檢驗方法 |
(Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods; German version EN 12196:2003) |
| DIN EN 12197-1997 |
體操器械.單杠.安全技術要求和檢驗方法 |
(Gymnastic equipment - Horizontal bars - Safety requirements and test methods; German version EN 12197:1997) |
| DIN EN 12198-1-2000 |
機械安全.對由機器輻射而產生的風險的評估和降低.第1部分:總則 |
(Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles; German version EN 12198-1:2000) |
| DIN EN 12198-2-2003 |
機械安全.機械輻射風險的評定和降低.第2部分:輻射測量規程 |
(Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure; German version EN 12198-2:2002) |
| DIN EN 12198-3-2003 |
機械安全.機械輻射風險的評定和降低.第3部分:通過衰減或屏蔽降低輻射 |
(Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening; German version EN 12198-3:2002) |
| DIN EN 12199-1998 |
彈性地板鋪面.均勻和非均勻成型彈性地板鋪面的規范 |
(Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings; German version EN 12199:1998) |
| DIN EN 12200-1-2001 |
地面上露天用塑料雨水管道系統.未增塑聚氯乙烯.第1部分:管、配件和系統規范 |
(Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000) |
| DIN EN 122001-1996 |
空白詳細規范:軍事需要的高頻插接器CECC-規范,適于MIL-C_39012 |
(Blank detail specification: CECC military specification for radio frequency connectors type MIL-C-39012; German version EN 122001:1993) |
| DIN EN 122002-1996 |
空白詳細規范.高頻同軸插塞連接器 |
(Blank detail specification: Radio frequency coaxial connectors; German version EN 122002:1993) |
| DIN EN 122003-1996 |
預制定客戶結構規范(CDS)以及帶資格認定的標準產品結構規范用空白詳細規范 |
(Blank detail specification for the preparation of customer detail specifications (CDS) and detail specifications for standard production items with capability approval; German version EN 122003:1994) |
| DIN EN 12201-1-2003 |
供水用塑料管道系統.聚乙烯.第1部分:總則 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General; German version EN 12201-1:2003) |
| DIN EN 12201-2-2003 |
供水用塑料管道系統.聚乙烯.第2部分:管道 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes; German version EN 12201-2:2003) |
| DIN EN 12201-3-2003 |
供水用塑料管道系統.聚乙烯.第3部分:配件 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003) |
| DIN EN 12201-4-2002 |
供水用塑料管系統.聚乙烯(PE).第4部分:閥 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2001) |
| DIN EN 12201-5-2003 |
供水用塑料管道系統.聚乙烯.第5部分:系統使用的配合度 |
(Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 12201-5:2003) |
| DIN EN 12203-2004 |
鞋靴、皮革和仿皮制品的制造機械.鞋和皮革的壓制機.安全要求 |
|
| DIN EN 12205-2001 |
可移動的氣瓶.不可再填充的金屬氣瓶 |
(Transportable gas cylinders - Non refillable metallic gas cylinders; German version EN 12205:2001) |
| DIN EN 12206-1-2004 |
色漆和清漆.建筑用鋁和鋁合金涂層.第1部分:從涂料粉制備的涂層 |
|
| DIN EN 12207-2000 |
窗和門.透氣率.分級 |
(Windows and doors - Air permeability - Classification; German version EN 12207:1999) |
| DIN EN 12208-2000 |
窗和門.防水性.分級 |
(Windows and doors - Watertightness - Classification; German version EN 12208:1999) |
| DIN EN 12209-2004 |
建筑物五金.鎖和閂.機械鎖、閂和鎖板.要求和試驗方法 |
|
| DIN EN 12210-2000 |
窗和門.抗風性.分級 |
(Windows and doors - Resistance to wind load - Classification; German version EN 12210:1999) |
| DIN EN 12210-2003 |
門窗.抗風性.分級 |
(Windows and doors - Resistance to wind load - Classification (includes Corrigendum AC:2002); German version EN 12210:1999 + AC:2002) |
| DIN EN 12211-2000 |
門窗.抗風力載荷.試驗方法 |
(Windows and doors - Resistance to wind load - Test method; German version EN 12211:2000) |
| DIN EN 122110-1996 |
分規范.高頻同軸插塞連接器.SMA系列 |
(Sectional specification: Radio frequency coaxial connectors; series SMA; German version EN 122110:1993) |
| DIN EN 122120-1996 |
分規范.高頻同軸插塞連接器.BNC系列 |
(Sectional specification: Radio frequency coaxial connectors; series BNC; German version EN 122120:1993) |
| DIN EN 12213-1998 |
冷卻罐.評定絕熱能力的方法 |
(Cryogenic vessels - Methods for performance evaluation of thermal isolation; German version EN 12213:1998) |
| DIN EN 122130-1996 |
分規范.高頻同軸插塞連接器.SMB系列 |
(Sectional specification: Radio frequency coaxial connectors; series SMB; German version EN 122130:1993) |
| DIN EN 122140-1996 |
分規范.高頻同軸插塞連接器.SMC系列 |
(Sectional specification: Radio frequency coaxial connectors; series SMC; German version EN 122140:1993) |
| DIN EN 12215-2005 |
涂覆設備.有機液體涂覆材料用噴灑室.安全要求 |
|
| DIN EN 122150-1996 |
分規范.高頻同軸插塞連接器.EIA法蘭系列 |
(Sectional specification: Radio frequency coaxial connectors; series EIA flange; German version EN 122150:1993) |
| DIN EN 12216-2002 |
外遮閉和內遮閉百葉窗.術語、詞匯和定義(三種語言版) |
(Shutters, external blinds, internal blinds - Terminology, glossary and definitions; Trilingual version EN 12216:2002) |
| DIN EN 122160-1996 |
分規范.高頻同軸插塞連接器.SSMA系列 |
(Sectional specification: Radio frequency coaxial connectors; series SSMA; German version EN 122160:1993) |
| DIN EN 12217-2004 |
門.操作力.要求和分類 |
|
| DIN EN 122170-1997 |
分規范:高頻同軸線連接器.SSMB系列 |
(Sectional specification: Radio frequency coaxial connectors; series SSMB; German version EN 122170:1993) |
| DIN EN 12218-2002 |
支承醫療設備的導軌系統(包括修改件A1) |
(Rail systems for supporting medical equipment (includes Amendment A1:2002); German version EN 12218:1998 + A1:2002)) |
| DIN EN 122180-1996 |
分規范.高頻同軸插塞連接器.SSMC系列 |
(Sectional specification: Radio frequency coaxial connectors; series SSMC; German version EN 122180:1993) |
| DIN EN 12219-2000 |
門.氣候影響.要求和分類 |
(Doors - Climatic influences - Requirements and classification; German version EN 12219:1999) |
| DIN EN 122190-1996 |
分規范.高頻同軸插塞連接器.7-16系列 |
(Sectional specification: Radio frequency coaxial connectors; series 7-16; German version EN 122190:1994) |
| DIN EN 12220-1998 |
建筑物內通風.空氣管道.一般通風用圓形法蘭的尺寸 |
(Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1997) |
| DIN EN 122200-1996 |
分規范.高頻同軸插塞連接器.TNC系列 |
(Sectional specification: Radio frequency coaxial connectors; series TNC; German version EN 122200:1994) |
| DIN EN 12221-1-1999 |
家用轉接設備.第1部分:安全要求 |
(Changing units for domestic use - Part 1: Safety requirements; German version EN 12221-1:1999) |
| DIN EN 12221-2-1999 |
家用轉接設備.第2部分:試驗方法 |
(Changing units for domestic use - Part 2: Test methods; German version EN 12221-2:1999) |
| DIN EN 12222-1997 |
鞋.鞋及其部件預處理和檢驗的標準大氣條件 |
(Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997) |
| DIN EN 12223-2000 |
無損檢驗.超聲檢驗.1號校準塊規范 |
(Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1; German version EN 12223:1999) |
| DIN EN 12224-2000 |
土工織物及其相關產品.耐氣候老化性能的測定 |
(Geotextiles and geotextile-related products - Determination of the resistance to weathering; German version EN 12224:2000) |
| DIN EN 12225-2000 |
土工織物及其相關產品.通過土埋試驗測定抗微生物的方法 |
(Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000) |
| DIN EN 12226-2000 |
土工織物及其相關產品.隨動耐久性測試評定的通用試驗 |
(Geotextiles and geotextile-related products - General tests for evaluation following durability testing; German version EN 12226:2000) |
| DIN EN 12227-1-2000 |
家用嬰兒圍欄.第1部分:安全要求 |
(Playpens for domestic use - Part 1: Safety requirements; German version EN 12227-1:1999) |
| DIN EN 12227-2-2000 |
家用嬰兒圍欄.第2部分:試驗方法 |
(Playpens for domestic use - Part 2: Test methods; German version EN 12227-1:1999) |
| DIN EN 12228-2002 |
體育場表面.合成表面的連接強度的測定 |
(Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2002) |
| DIN EN 12229-2000 |
運動場表面.人工草皮和織物試樣的制備方法 |
(Surfaces for sports areas - Procedure for the preparation of synthetic turf and textile test pieces; German version EN 12229:1999) |
| DIN EN 12230-2003 |
運動場表面.綜合運動場表面伸展性能的測定 |
(Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces; German version EN 12230:2003) |
| DIN EN 12231-2003 |
運動場表面.試驗方法.天然草皮地面覆蓋度的測定 |
(Surfaces for sports areas - Method of test - Determination of ground cover of natural turf; German version EN 12231:2003) |
| DIN EN 12232-2003 |
運動場表面.試驗方法.天然草皮茅草厚度的測定 |
(Surfaces for sports areas - Determination of thatch depth of natural turf; German version EN 12232:2003) |
| DIN EN 12233-2003 |
運動場表面.天然草皮高度的測定 |
(Surfaces for sports areas - Determination of sward height of natural turf; German version EN 12233:2003) |
| DIN EN 12234-2002 |
體育場表面.球滾動性能的測定 |
(Surfaces for sports areas - Determination of ball roll behaviour; German version EN 12234:2002) |
| DIN EN 122340-2002 |
分規范:無線電頻率共軸聯接器.MMCX系列 |
(Sectional specification: Radio frequency coaxial connectors - Series MMCX; German version EN 122340:2002) |
| DIN EN 12235-2004 |
運動場表面.垂直球特性的測定 |
|
| DIN EN 12236-2002 |
建筑物通風.管道懸吊裝置和支撐物.強度要求 |
(Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; German version EN 12236:2002) |
| DIN EN 12237-2003 |
建筑物的通風.管道作業.圓形薄金屬板管道的強度和泄漏量 |
(Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts; German version EN 12237:2003) |
| DIN EN 12238-2001 |
建筑物通風.機場設備.混流設施的空氣動力學試驗和額定值 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; German version EN 12238:2001) |
| DIN EN 12239-2001 |
建筑物通風.空氣終端裝置.空氣動力試驗和流動應用替代速率. |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; German version EN 12239:2001) |
| DIN EN 12240-1997 |
粘合拉鎖.粘合拉鎖的整體寬度和有效寬度及鎖緊后拉鎖的有效寬度的測定 |
(Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure; German version EN 12240:1997) |
| DIN EN 12241-1999 |
搭扣.水洗、干燥或干洗前的鎖緊方法 |
(Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning; German version EN 12241:1999) |
| DIN EN 12242-1999 |
搭扣.剝離強度的測定 |
(Touch and close fasteners - Determination of peel strength; German version EN 12242:1999) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com