標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 15367-2-2005 |
激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 |
|
| DIN EN ISO 15367-2-2005 |
激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 |
|
| DIN EN ISO 15463-2005 |
石油和天然氣工業.新套管、管和平端鉆管的現場檢驗 |
|
| DIN EN ISO 15463-2005 |
石油和天然氣工業.新套管、管和平端鉆管的現場檢驗 |
|
| DIN EN ISO 15465-2004 |
管道工程.帶繞金屬軟管和軟管配件 |
|
| DIN EN ISO 15480-2000 |
帶攻絲螺紋及六角墊圈螺釘頭的自攻螺釘 |
(Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999) |
| DIN EN ISO 15481-2000 |
帶攻絲螺紋的十字凹槽平頭自攻螺釘 |
(Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999) |
| DIN EN ISO 15482-2000 |
帶攻絲螺紋的十字凹槽沉頭自攻螺釘 |
(Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999) |
| DIN EN ISO 15483-2000 |
帶攻絲螺紋的十字凹槽半沉頭自攻螺釘 |
(Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999) |
| DIN EN ISO 15487-2002 |
紡織品.評定家庭洗滌和烘干后衣服和其它紡織品外觀的方法 |
(Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999); German version EN ISO 15487:2001) |
| DIN EN ISO 15496-2004 |
織物.質量控制用織物的水蒸氣滲透率測量 |
|
| DIN EN ISO 15512-2004 |
塑料.水含量的測定 |
|
| DIN EN ISO 15526-1-2004 |
塑料.聚酮模塑和擠塑材料.第1部分:命名系統和基本規范 |
|
| DIN EN ISO 15526-2-2004 |
塑料.聚酮模塑和擠塑材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 15528-2000 |
涂料和清漆用涂料、清漆和原材料.抽樣 |
(Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000); German version EN ISO 15528:2000) |
| DIN EN ISO 15540-2002 |
船舶和航海技術.軟管組件的抗燃性.試驗方法 |
(Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001) |
| DIN EN ISO 15541-2002 |
船舶和航海技術.軟管組件的抗燃性.試驗板的要求 |
(Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001) |
| DIN EN ISO 15546-2005 |
石油和天然氣工業.鋁合金鉆桿 |
|
| DIN EN ISO 15546-2005 |
石油和天然氣工業.鋁合金鉆桿 |
|
| DIN EN ISO 15547-2003 |
石油和天然氣工業.板式熱交換器 |
(Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000); German and English version EN ISO 15547:2001) |
| DIN EN ISO 15584-2001 |
小型船舶.船內汽油發動機.發動機燃料和電氣件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001); German version EN ISO 15584:2001) |
| DIN EN ISO 15586-2004 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
(Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003) |
| DIN EN ISO 15586-2004 |
水質.用石墨爐原子吸收光譜法測定痕量素 |
|
| DIN EN ISO 15587-1-2002 |
水質.確定水中所選素的發酵作用.第1部分:水解發酵 |
(Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002); German version EN ISO 15587-1:2002) |
| DIN EN ISO 15587-2-2002 |
水質.確定水中所選素的發酵作用.第2部分:硝酸發酵作用 |
(Water quality - Digestion for the determination of elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002); German version EN ISO 15587-2:2002) |
| DIN EN ISO 1559-2001 |
牙科材料.牙用汞齊合金 |
(Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997); German version EN ISO 1559:2001) |
| DIN EN ISO 15605-2004 |
膠粘劑.抽樣 |
|
| DIN EN ISO 15606-2000 |
牙鉆手柄.氣動刮器和刮器尖端 |
(Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999); German version EN ISO 15606:1999) |
| DIN EN ISO 15607-2004 |
金屬材料焊接程序規范和合格鑒定.總則 |
|
| DIN EN ISO 15609-1-2005 |
金屬材料焊接程序的規范和合格鑒定.焊接程序規范.第1部分:弧焊 |
|
| DIN EN ISO 15609-2-2001 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第2部分:氣焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001) |
| DIN EN ISO 15609-3-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第3部分:電子束焊接 |
|
| DIN EN ISO 15609-4-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第4部分:激光束焊接 |
|
| DIN EN ISO 15609-5-2004 |
金屬材料焊接程序的規范和合格評定.焊接程序規范.第5部分:電阻焊接 |
|
| DIN EN ISO 1561-1998 |
牙科嵌入鑄蠟嵌體 |
(Dental casting wax (ISO 1561:1995); German version EN ISO 1561:1997) |
| DIN EN ISO 15610-2004 |
金屬材料焊接過程的規范和合格鑒定.基于已試驗過的焊接耗材的合格鑒定 |
(Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003) |
| DIN EN ISO 15610-2004 |
金屬材料焊接過程的規范和合格鑒定.基于已試驗過的焊接耗材的合格鑒定 |
|
| DIN EN ISO 15611-2004 |
金屬材料焊接程序規范和合格鑒定.根據已有的焊接經驗進行合格鑒定 |
|
| DIN EN ISO 15612-2004 |
金屬材料焊接程序的規范和合格評定.通過采用標準焊接程序的合格評定 |
|
| DIN EN ISO 15613-2004 |
金屬材料焊接程序的規范和合格鑒定.基于生產前焊接試驗的鑒定 |
|
| DIN EN ISO 15614-1-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第1部分:鋼的弧焊接和氣焊接以及鎳和鎳合金的弧焊接 |
|
| DIN EN ISO 15614-11-2002 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第11部分:電子和激光束焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002) |
| DIN EN ISO 15614-12-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第12部分:點焊、縫焊和凸焊 |
|
| DIN EN ISO 15614-5-2004 |
金屬材料焊接程序的規范和鑒定.焊接程序試驗.第5部分:鈦、鋯及其合金的電弧焊接 |
|
| DIN EN ISO 15614-8-2002 |
金屬材料焊接程序規范和要求.焊接程序試驗.第8部分:管對管連接件 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002) |
| DIN EN ISO 15615-2002 |
氣體焊接設備.焊接用Acetylenemanifoldsystems、切割和alliedprocesses高壓裝置的安全要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002); German version EN ISO 15615:2002) |
| DIN EN ISO 15616-1-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003) |
| DIN EN ISO 15616-2-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003) |
| DIN EN ISO 15616-3-2003 |
高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003) |
| DIN EN ISO 15618-1-2002 |
水下焊接的焊工資格鑒定試驗.第1部分:超高壓濕焊的潛水員焊工 |
(Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001); German version EN ISO 15618-1:2001) |
| DIN EN ISO 15618-2-2002 |
水下焊接的焊工資格鑒定試驗.第2部分:超高壓干焊的潛水員焊工和焊接操作員 |
(Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001); German version EN ISO 15618-2:2001) |
| DIN EN ISO 1562-1995 |
牙科金鑄造合金 |
(Dental casting gold alloys (ISO 1562:1993); German version EN ISO 1562:1995) |
| DIN EN ISO 1562-2004 |
牙科.鑄金合金 |
|
| DIN EN ISO 15620-2000 |
焊接.金屬材料的摩擦焊接 |
(Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000) |
| DIN EN ISO 15630-1-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第1部分:加筋棒、鋼絲桿和鋼絲 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bar, wire rod and wire (ISO 15630-1:2002); German version EN ISO 15630-1:2002) |
| DIN EN ISO 15630-2-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); German version EN ISO 15630-2:2002) |
| DIN EN ISO 15630-3-2002 |
混凝土的鋼筋和預應力用鋼.試驗方法.第3部分:預應力鋼 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002); German version EN ISO 15630-3:2002) |
| DIN EN ISO 1564-1999 |
水化牙科瓊脂基印模材料 |
(Dental aqueous impression materials based on agar (ISO 1564:1995); German version EN ISO 1564:1998) |
| DIN EN ISO 15641-2001 |
高速切削機床用銑刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements (ISO 15641:2001); German version EN ISO 15641:2001) |
| DIN EN ISO 15652-2005 |
小艇.小型噴水推進艇艙內用遠程操縱系統 |
|
| DIN EN ISO 15652-2005 |
小艇.小型噴水推進艇艙內用遠程操縱系統 |
|
| DIN EN ISO 15667-2001 |
聲學.由外殼和艙室控制噪聲的指南 |
(Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); German version EN 15667:2000) |
| DIN EN ISO 1567-2000 |
牙科學-假牙基料聚合物 |
(Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000) |
| DIN EN ISO 15680-2004 |
水質.使用purge-and-trap和熱解析法進行若干單環芳烴、萘和一些氯化物的氣相色譜測定 |
|
| DIN EN ISO 15681-1-2005 |
水質.用流量分析法(FIA和CFA)測定正磷酸鹽和總磷含量.第1部分:流量注入分析法 |
|
| DIN EN ISO 15681-1-2005 |
水質.用流量分析法(FIA和CFA)測定正磷酸鹽和總磷含量.第1部分:流量注入分析法 |
|
| DIN EN ISO 15681-2-2005 |
水質.用流量分析法(FIA和CFA)測定正磷酸鹽和總磷含量.第2部分:連續流量分析法 |
|
| DIN EN ISO 15681-2-2005 |
水質.用流量分析法(FIA和CFA)測定正磷酸鹽和總磷含量.第2部分:連續流量分析法 |
|
| DIN EN ISO 15682-2002 |
水質.通過流量分析(CFA和FIA)和光度測量或電勢檢測法測定氯化物含量 |
(Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000); German version EN ISO 15682:2001) |
| DIN EN ISO 15695-2001 |
釉層和搪瓷.末涂瓷漆耐劃痕性的測定. |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000); German version EN ISO 15695:2001) |
| DIN EN ISO 15700-1999 |
皮革.色牢度試驗.耐水斑點色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998); German version EN ISO 15700:1999) |
| DIN EN ISO 15701-1999 |
皮革.色牢度試驗.受聚氯乙烯影響的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride) (ISO 15701:1998); German version EN ISO 15701:1999) |
| DIN EN ISO 15702-1999 |
皮革.色牢度試驗.機洗對色牢度的影響 |
(Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998); German version EN ISO 15702:1999) |
| DIN EN ISO 15703-1999 |
皮革.色牢度試驗.輕柔洗滌對色牢度的影響 |
(Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998); German version EN ISO 15703:1999) |
| DIN EN ISO 15720-2001 |
金屬涂層.孔隙率試驗.膠材料電版術法測定金屬襯底上金或鈀涂層的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001) |
| DIN EN ISO 15721-2001 |
金屬涂層.孔隙率試驗.用亞硫酸和二氧化硫蒸氣測定金或鈀涂層的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001) |
| DIN EN ISO 15744-2002 |
手持非電動工具.噪聲測量代碼.工程法(2級) |
(Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002); German version EN ISO 15744:2002) |
| DIN EN ISO 15747-2005 |
靜脈注射用塑料容器 |
|
| DIN EN ISO 15747-2005 |
靜脈注射用塑料容器 |
|
| DIN EN ISO 15747-2005 |
靜脈注射用塑料容器 |
|
| DIN EN ISO 15748-1-2002 |
船舶和航海技術.在船上和海上建筑物上飲用水的供應.第1部分:計劃和設計 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002); German version EN ISO 15748-1:2002) |
| DIN EN ISO 15748-2-2002 |
船舶和航海技術.在船上和海上建筑物上飲用水的供應.第2部分:計算方法 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002); German version EN ISO 15748-2:2002) |
| DIN EN ISO 15749-1-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第1部分:衛生排水系統設計 |
|
| DIN EN ISO 15749-2-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第2部分:重力系統用衛生排水和排水管道 |
|
| DIN EN ISO 15749-3-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第3部分:真空系統用衛生排水和排水管道 |
|
| DIN EN ISO 15749-4-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第4部分:衛生排水和污物處置管 |
|
| DIN EN ISO 15749-5-2004 |
船舶和海上技術.船舶和海上結構物的排水系統.第5部分:甲板、貨艙和游泳池的排水 |
|
| DIN EN ISO 15755-1999 |
紙與紙張.反面估算 |
(Paper and board - Estimation of contraries (ISO 15755:1999); German version EN ISO 15755:1999) |
| DIN EN ISO 15761-2003 |
石油和天然氣工業用規格為DN100及更小的鋼閘閥、球閥和止回閥 |
(Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)) |
| DIN EN ISO 15774-2002 |
動植物脂肪和油.用直接石墨熔爐原子吸收光譜法測定鎘含量 |
(Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2000); German version EN ISO 15774:2001) |
| DIN EN ISO 15783-2004 |
無封裝旋翼動力泵.級別II.規范 |
|
| DIN EN ISO 15785-2002 |
技術制圖.粘合、折疊和疊壓接縫的符號指示和表示法 |
(Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002); German version EN ISO 15785:2002) |
| DIN EN ISO 15788-1-2001 |
動植物脂肪和油.植物油中stigmastidenes的測定.第1部分:毛細管柱氣相色譜法(基準方法) |
(Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method) (ISO 15788-1:1999); German version EN ISO 15788-1:2001) |
| DIN EN ISO 15788-2-2005 |
動植物脂肪和油.植物油中豆固醇的測定.第2部分:高效液相色譜法 |
|
| DIN EN ISO 15791-1-2005 |
塑料.塑料產品用中等規模燃燒試驗的設計和應用.第1部分:一般指南 |
|
| DIN EN ISO 15797 Berichtigung 1-2005 |
紡織品.工作服測試用工業洗滌和整理規程.EN ISO 15797-2004的勘誤 |
|
| DIN EN ISO 15797-2004 |
紡織材料.工作服檢測用工業洗滌和整理規程 |
|
| DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手術粘接件 |
|
| DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手術粘接件 |
|
| DIN EN ISO 15798-2001 |
眼科植入物.黏彈性眼科植入裝置 |
(Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2001); German version EN ISO 15798:2001) |
| DIN EN ISO 1580-1994 |
帶槽平頭螺釘.產品等級A |
(Slotted pan head screws - Product grade A (ISO 1580:1994); German version EN ISO 1580:1994) |
| DIN EN ISO 15831-2004 |
服飾.生理效應.用熱的人體模型法測量隔熱性 |
|
| DIN EN ISO 15854-2005 |
牙科學.鑄型蠟和假牙托蠟 |
|
| DIN EN ISO 15874-1-2004 |
冷熱水裝置用塑料管道系統.聚丙烯(PP).第1部分:總則 |
|
| DIN EN ISO 15874-2-2004 |
冷熱水裝置用塑料管道系統.聚丙烯(PP).第2部分:管道 |
|
| DIN EN ISO 15874-3-2004 |
冷熱水裝置用塑料管道系統.聚丙烯(PP).第3部分:配件 |
|
| DIN EN ISO 15874-5-2004 |
冷熱水裝置用塑料管道系統.聚丙烯(PP).第5部分:系統的適應性 |
|
| DIN EN ISO 15875-1-2004 |
冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第1部分:總則 |
|
| DIN EN ISO 15875-2-2004 |
冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第2部分:管道 |
|
| DIN EN ISO 15875-3-2004 |
冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第3部分:配件 |
|
| DIN EN ISO 15875-5-2004 |
冷熱水裝置用塑料管道設備.交聯聚乙烯(PE-X).第5部分:系統的適應性 |
|
| DIN EN ISO 15876-1-2004 |
冷熱水裝置用塑料管道設備.聚丁烯(PB).第1部分:總則 |
|
| DIN EN ISO 15876-2-2004 |
冷熱水裝置用塑料管道設備.聚丁烯(PB).第2部分:管道 |
|
| DIN EN ISO 15876-3-2004 |
冷熱水裝置用塑料管道設備.聚丁烯(PB).第3部分:配件 |
|
| DIN EN ISO 15876-5-2004 |
冷熱水裝置用塑料管道設備.聚丁烯(PB).第5部分:系統的適應性 |
|
| DIN EN ISO 15877-1-2004 |
冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第1部分:總則 |
|
| DIN EN ISO 15877-2-2004 |
冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第2部分:管道 |
|
| DIN EN ISO 15877-3-2004 |
冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第3部分:配件 |
|
| DIN EN ISO 15877-5-2004 |
冷熱水裝置用塑料管道設備.氯化聚氯乙烯(PVC-C).第5部分:系統的適應性 |
|
| DIN EN ISO 15880-2004 |
色漆、清漆和粘合劑.水基涂料和粘合劑的MEQ值的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com