標準號 |
中文名稱 |
英文名稱 |
| DIN EN 326-1-1994 |
木材.取樣.切割和監測.第1部分:試樣取樣和切割以及試驗結果說明 |
(Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994) |
| DIN EN 326-2-2000 |
木質板.取樣.切割和檢驗.第2部分:工廠中的質量控制 |
(Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; German version EN 326-2:2000) |
| DIN EN 326-3-1998 |
木材.取樣,切割和監測.第3部分:木板供貨的驗收檢驗 |
(Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels; German version EN 326-3:1998) |
| DIN EN 326-3-2004 |
木基板材.取樣、切割和檢驗.第3部分:單批板材的檢驗 |
|
| DIN EN 3264-2002 |
航空和航天系列.鈦合金管連接件8度30分.推力金屬絲螺母 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Thrust wire nuts; German version EN 3264:2001) |
| DIN EN 3266-2002 |
航空和航天系列.鈦合金管連接件.悶頭螺母 |
(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001) |
| DIN EN 3267-2002 |
航空和航天系列.鈦合金悶頭墊圈 |
(Aerospace series - Washers, bulkhead, in titanium alloy; German version EN 3267:2001) |
| DIN EN 3268-2002 |
航空和航天系列.鈦合金管聯接件8度30分.壓力插頭 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Pressure plug; German version EN 3268:2001) |
| DIN EN 327-2003 |
熱交換器.強制對流空氣冷卻制冷劑凝結器.性能確定的試驗程序 |
(Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance (includes amendment A1:2002); German version EN 327:2000 + A1:2002) |
| DIN EN 3270-2004 |
航空航天系列.8°30鈦合金管連接件.帶鎖緊環的堵塞 |
|
| DIN EN 3274-2002 |
航空和航天系列.鈦合金管聯接件8度30分.螺紋.幾何配置 |
(Aerospace series - Pipe coupling 8?0 - Threaded; Geometric configuration; German version EN 3274:2001) |
| DIN EN 3275-2002 |
航空航天系列.管連接80`高達28000kPa.移動光束密封.米制系列.技術規范 |
(Aerospace series - Pipe coupling 8?0 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002) |
| DIN EN 328-2003 |
熱交換器.冷凍用強制對流空氣冷卻器的性能確定的試驗程序 |
(Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration (includes amendment A1:2002); German version EN 328:1999 + A1:2002) |
| DIN EN 3280-1994 |
航空和航天.飛機上用軸承.滾動軸承.向心球軸承或擺動軸承.交貨技術條件 |
(Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994) |
| DIN EN 3281-1994 |
航空和航天.飛機用軸承.鋼制單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994) |
| DIN EN 3282-1994 |
航空和航天.飛機用軸承.鍍鎘剛制單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994) |
| DIN EN 3283-1994 |
航空和航天.飛機用軸承.不銹鋼單列向心球軸承.直徑系列8和9.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994) |
| DIN EN 3284-1994 |
航空和航天.飛機用軸承.鋼制單列向心球軸承.直徑系列0和2.一般軸承間隙.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994) |
| DIN EN 3285-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制單列向心球軸承.直徑系列0和2.一般軸承間隙.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994) |
| DIN EN 3286-1994 |
航空和航天.飛機用軸承.不銹鋼制單列向心球軸承.直徑系列0和2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994) |
| DIN EN 3287-1994 |
航空和航天.飛機用軸承.鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994) |
| DIN EN 3288-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994) |
| DIN EN 3289-1994 |
航空和航天.飛機用軸承.不銹鋼制雙列自動調心球軸承.直徑系列2.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994) |
| DIN EN 3290-1994 |
航空和航天.飛機用軸承.鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994) |
| DIN EN 3291-1994 |
航空和航天.飛機用軸承.鍍鎘鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994) |
| DIN EN 3292-1994 |
航空和航天.飛機用軸承.不銹鋼制單列球面軸承.直徑系列3和4.尺寸和負載 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994) |
| DIN EN 3297-1998 |
航空和航天.薄壁,自鎖,耐高溫鎳基合金NI-P100HT(因康718)制用MJ螺紋的螺紋接頭.交貨技術條件 |
(Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998) |
| DIN EN 3298-1998 |
航空和航天.薄壁,自鎖螺紋接頭.裝卸方法 |
(Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German version EN 3298:1998) |
| DIN EN 33-2003 |
帶密耦沖洗水箱的座便器.連接尺寸 |
(Pedestal W.C. pans with close coupled flushing cistern - Connecting dimensions; German version EN 33:2003) |
| DIN EN 330-1993 |
木材防腐劑.測定不接觸地面和涂層情況下使用的木材防腐劑的相對作用的野外試驗 |
(Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method; German version EN 330:1993) |
| DIN EN 3303-1997 |
航空和航天.鍍鎘合金鋼制中等螺紋長度內六角圓柱形螺絲.等級:1100MPa(室溫下)/235℃ |
(Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3303:1997) |
| DIN EN 3304-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫下)/315 |
(Aerospace series - Screws, 100 countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS lubricated, classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3304:1996) |
| DIN EN 3305-1996 |
航空和航天.合金鋼制鍍鎘短螺紋帶翼型十字槽帶小頭100度沉頭配合螺釘.等級:1100MPa(室溫下)/235℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3305:1996) |
| DIN EN 3306-1996 |
航空和航天.鈦合金制陽極化MoS2潤滑短螺紋接近頂點帶翼形十字槽的100度沉頭螺絲.等級:1100MPa/315℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3306:1996) |
| DIN EN 3307-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3307:1996) |
| DIN EN 3308-1996 |
航空和航天.鈦合金制陽極化MoS2潤滑螺紋接近頂點的六角螺絲.等級:1100MPa/315℃ |
(Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3308:1996) |
| DIN EN 331-1999 |
建筑物燃?xì)庠O(shè)備上的手動球閥和底部相鎖緊的錐形塞閥 |
(Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998) |
| DIN EN 334-2001 |
入口壓力100巴以下用氣體壓力調節器.德文版本EN334:1999+A:2000 |
(Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:1999 + A1:2000) |
| DIN EN 334-2005 |
入口壓力100巴及以下用氣體壓力調節器 |
|
| DIN EN 334-2005 |
入口壓力100巴及以下用氣體壓力調節器 |
|
| DIN EN 334-2005 |
入口壓力100巴及以下用氣體壓力調節器 |
|
| DIN EN 335-1-1992 |
木材和木材制品的耐久性.細菌侵害危險等級的定義.第1部分:通則 |
(Durability of wood and derived materials; definition of hazard classes of biological attack; part 1: general; german version EN 335-1:1992) |
| DIN EN 335-2-1992 |
木材和木材制品的耐久性.細菌侵害危險等級的定義.第2部分:純木材制品時的應用 |
(Durability of wood and derived materials; definition of hazard classes of biological attack; part 2: application to solid wood; german version EN 335-2:1992) |
| DIN EN 335-3-1995 |
木材和木材制品的耐久性.細菌侵害危險等級的定義.第3部分:木制板面的應用 |
(Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels; German version EN 335-3:1995) |
| DIN EN 336-2003 |
結構木材.尺寸和允許偏差 |
(Structural timber - Sizes, permitted deviations; German version EN 336:2003) |
| DIN EN 3377-1996 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制自鎖六角螺母.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3377:1996) |
| DIN EN 3379-1996 |
航空和航天.耐高溫鎳基合金NI-P101HT(沃斯帕落伊合金)制厚螺母用中螺紋,十二角配合螺栓.等級:1210MPa(室溫 |
(Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 3 |
| DIN EN 338-2003 |
結構木材.強度等級 |
(Timber structures - Strength classes; German version EN 338:2003) |
| DIN EN 3380-1996 |
航空和航天.安全環.交貨技術條件 |
(Aerospace series - Rings, retaining - Technical specification; German version EN 3380:1996) |
| DIN EN 3381-1996 |
航空和航天.鈦制陽極處理MoS鍛造短螺紋帶翼型十字槽100度沉頭配合螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3381:1996) |
| DIN EN 34-1992 |
壁懸式抽水馬桶水箱.連接尺寸 |
(Wall hung W.C. pan with close coupled cistern; connecting dimensions; german version EN 34:1992) |
| DIN EN 340-1993 |
防護服.一般要求 |
(Protective clothing; general requirements; German version EN 340:1993) |
| DIN EN 340-2004 |
防護服.一般要求 |
|
| DIN EN 341 Berichtigung 1-1994 |
對DINEN341標準的修正 |
(Corrigendum to DIN EN 341:1993-02; German version EN 341:1992/AC:1993) |
| DIN EN 341-1993 |
防人員墜落保護裝置.繩索下滑器 |
(Personal protective equipment against falls from a height; descender devices; german version EN 341:1992) |
| DIN EN 342-2004 |
防護服.防寒外套和防寒套裝 |
|
| DIN EN 344-1-1997 |
工商專用安全鞋,防護鞋,職業鞋.第1部分:要求和檢驗方法(包括更改A:1997) |
(Safety, protective and occupational footwear for professional use - Part 1: Requirements and test methods (includes Amendment A1:1997); German version EN 344:1992 + A1:1997) |
| DIN EN 344-2-1996 |
專用安全、防護和職業用鞋靴.第2部分:附加要求和試驗方法 |
(Safety, protective and occupational footwear for professional use - Part 2: Additional requirements and test methods; German version EN 344-2:1996) |
| DIN EN 3446-1995 |
航空和航天.用于儀器儀表不帶耐蝕鋼法蘭的精密球軸承.尺寸和負載 |
(Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 3446:1995) |
| DIN EN 345-1-1997 |
工商業用安全鞋.第1部分:規范(包括更改A1:1997) |
(Safety footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 345:1992 + A1:1997) |
| DIN EN 345-2-1996 |
專業用安全鞋靴.第2部分:附加規范 |
(Safety footwear for professional use - Part 2: Additional specifications; German version EN 345-2:1996) |
| DIN EN 346-1-1997 |
工商業用防護鞋.第1部分:規范(包括修正更改A1:1997) |
(Protective footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 346:1992 + A1:1997) |
| DIN EN 346-2-1996 |
專業用防護鞋靴.第2部分:附加規范 |
(Protective footwear for professional use - Part 2: Additional specifications; German version EN 346-2:1996) |
| DIN EN 347-1-1997 |
工商業用職業鞋.第1部分:規范(包括修正更改A1:1997) |
(Occupational footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 347:1992 + A1:1997) |
| DIN EN 347-2-1996 |
工商業用職業鞋.第2部分:附加規范 |
(Occupational footwear for professional use - Part 2: Additional specifications; German version EN 347-2:1996) |
| DIN EN 3475-100-2002 |
航空航天系列.飛行器用電纜.試驗方法.第100部分:總則 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General; German version EN 3475-100:2002) |
| DIN EN 3475-201-2002 |
航空航天系列.飛行器用電纜.試驗方法.第201部分:外觀檢查 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination; German version EN 3475-201:2002) |
| DIN EN 3475-202-2002 |
航空航天系列.飛行器用電纜.試驗方法.第202部分:質量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass; German version EN 3475-202:2002) |
| DIN EN 3475-301-2002 |
航空航天系列.飛行器用電纜.試驗方法.第301部分:單位長度電阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length; German version EN 3475-301:2002) |
| DIN EN 3475-302-2002 |
航空航天系列.飛行器用電纜.試驗方法.第302部分:電壓保護試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test; German version EN 3475-302:2002) |
| DIN EN 3475-303-2002 |
航空航天系列.飛行器用電纜.試驗方法.第303部分:絕緣電阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance; German version EN 3475-303:2002) |
| DIN EN 3475-304-2002 |
航空航天系列.飛行器用電纜.試驗方法.第304部分:表面電阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance; German version EN 3475-304:2002) |
| DIN EN 3475-305-2002 |
航空航天系列.飛行器用電纜.試驗方法.第305部分:過載電阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance; German version EN 3475-305:2002) |
| DIN EN 3475-401-2002 |
航空航天系列.飛行器用電纜.試驗方法.第401部分:加速老化 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing; German version EN 3475-401:2002) |
| DIN EN 3475-402-2002 |
航空航天系列.飛行器用電纜.試驗方法.第402部分:收縮和脫層 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination; German version EN 3475-402:2002) |
| DIN EN 3475-403-2002 |
航空航天系列.飛行器用電纜.試驗方法.第403部分:脫層和阻塞 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking; German version EN 3475-403:2002) |
| DIN EN 3475-404-2002 |
航空航天系列.飛行器用電纜.試驗方法.第404部分:熱沖擊 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock; German version EN 3475-404:2002) |
| DIN EN 3475-405-2002 |
航空航天系列.飛行器用電纜.試驗方法.第405部分:環境溫度下彎曲試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature; German version EN 3475-405:2002) |
| DIN EN 3475-406-2002 |
航空航天系列.飛行器用電纜.試驗方法.第406部分:冷彎試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test; German version EN 3475-406:2002) |
| DIN EN 3475-407-2002 |
航空航天系列.飛行器用電纜.試驗方法.第407部分:易燃性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability; German version EN 3475-407:2002) |
| DIN EN 3475-409-2002 |
航空航天系列.飛行器用電纜.試驗方法.第409部分:真空老化試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002) |
| DIN EN 3475-410-2002 |
航空航天系列.飛行器用電纜.試驗方法.第410部分:耐熱試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance; German version EN 3475-410:2002) |
| DIN EN 3475-412-2002 |
航空航天系列.飛行器用電纜.試驗方法.第412部分:耐濕試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002) |
| DIN EN 3475-413-2002 |
航空航天系列.飛行器用電纜.試驗方法.第413部分:反向纏繞試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002) |
| DIN EN 3475-501-2002 |
航空航天系列.飛行器用電纜.試驗方法.第501部分:動態切開試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic cut-through; German version EN 3475-501:2002) |
| DIN EN 3475-502-2002 |
航空航天系列.飛行器用電纜.試驗方法.第502部分:切口延伸試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation; German version EN 3475-502:2002) |
| DIN EN 3475-503-2002 |
航空航天系列.飛行器用電纜.試驗方法.第503部分:擦傷磨蝕試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion; German version EN 3475-503:2002) |
| DIN EN 3475-504-2002 |
航空航天系列.飛行器用電纜.試驗方法.第504部分:扭轉 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion; German version EN 3475-504:2002) |
| DIN EN 3475-505-2002 |
航空航天系列.飛行器用電纜.試驗方法.第505部分:連接件和絞線抗拉試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands; German version EN 3475-505:2002) |
| DIN EN 3475-506-2002 |
航空航天系列.飛行器用電纜.試驗方法.第506部分:電鍍均勻性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuits; German version EN 3475-506:2002) |
| DIN EN 3475-507-2002 |
航空航天系列.飛行器用電纜.試驗方法.第507部分:鍍層粘結性試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Adherence of plating; German version EN 3475-507:2002) |
| DIN EN 3475-508-2002 |
航空航天系列.飛行器用電纜.試驗方法.第508部分:鍍層厚度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2002) |
| DIN EN 3475-509-2002 |
航空航天系列.飛行器用電纜.試驗方法.第509部分:可焊度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002) |
| DIN EN 3475-510-2002 |
航空航天系列.飛行器用電纜.試驗方法.第510部分:擠壓絕緣護套和包裝材料的抗拉強度和延伸度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002) |
| DIN EN 3475-511-2002 |
航空航天系列.飛行器用電纜.試驗方法.第511部分:電纜間的磨損 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002) |
| DIN EN 3475-512-2002 |
航空航天系列.飛行器用電纜.試驗方法.第512部分:耐彎曲 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002) |
| DIN EN 3475-603-2002 |
航空航天系列.飛行器用電纜.試驗方法.第603部分:耐濕弧徑跡 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2002) |
| DIN EN 3475-604-2002 |
航空航天系列.飛行器用電纜.試驗方法.第604部分:耐干弧傳導 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002) |
| DIN EN 3475-605-2002 |
航空航天系列.飛行器用電纜.試驗方法.第605部分:濕短路試驗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002) |
| DIN EN 3475-701-2002 |
航空航天系列.飛行器用電纜.試驗方法.第701部分:導體絕緣的可剝離性和粘結性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor; German version EN 3475-701:2002) |
| DIN EN 3475-702-2002 |
航空航天系列.飛行器用電纜.試驗方法.第702部分:屏蔽后推移力 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability; German version EN 3475-702:2002) |
| DIN EN 3475-703-2002 |
航空航天系列.飛行器用電纜.試驗方法.第703部分:制造商標記的耐久性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer`s marking; German version EN 3475-703:2002) |
| DIN EN 3475-704-2002 |
航空航天系列.飛行器用電纜.試驗方法.第704部分:撓性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility; German and English version EN 3475-704:2002) |
| DIN EN 3475-705-2002 |
航空航天系列.飛行器用電纜.試驗方法.第704部分:對比測量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2002) |
| DIN EN 3475-801-2002 |
航空航天系列.飛行器用電纜.試驗方法.第801部分:單位長度的電容量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002) |
| DIN EN 3475-802-2002 |
航空航天系列.飛行器用電纜.試驗方法.第802部分:電容量不平衡性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002) |
| DIN EN 3475-803-2002 |
航空航天系列.飛行器用電纜.試驗方法.第803部分:電容量變化 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002) |
| DIN EN 3475-804-2002 |
航空航天系列.飛行器用電纜.試驗方法.第804部分:傳播速度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002) |
| DIN EN 3475-805-2002 |
航空航天系列.飛行器用電纜.試驗方法.第805部分:特性阻抗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002) |
| DIN EN 3475-806-2002 |
航空航天系列.飛行器用電纜.試驗方法.第806部分:衰減 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002) |
| DIN EN 3475-807-2002 |
航空航天系列.飛行器用電纜.試驗方法.第807部分:傳輸阻抗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002) |
| DIN EN 3475-808-2002 |
航空航天系列.飛行器用電纜.試驗方法.第808部分:串音 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002) |
| DIN EN 348-1992 |
防護服.檢驗方法.受小飛濺物金屬影響材料的性能的測定 |
(Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992) |
| DIN EN 349-1993 |
機器的安全性.避免人身體部位受到擠壓的最小距離 |
(Safety of machinery; minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993) |
| DIN EN 35-2000 |
只從上面供水的立式坐浴盆.連接尺寸 |
(Pedestal bidets over-rim supply only - Connecting dimensions; German version EN 35:2000) |
| DIN EN 350-1-1994 |
木材和木材制品的耐久性.全木自然耐久性.第1部分:木材自然耐久性的檢驗和分類原則 |
(Durability of wood and wood based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood; German version EN 350-1:1994) |
| DIN EN 350-2-1994 |
木材和木材產品耐久性.全木的自然耐久性.第2部分:在歐洲特殊意義下選出的木材種類的自然耐久性和可治療性說 |
(Durability of wood and wood based products - Natural durability of solid wood - Part 2: Guide to the natural durability and treatability of selected wood species of importance in Europe; German version EN 350-2:1994) |
| DIN EN 3506-2003 |
航空航天系列.鈦和鈦合金熱軋薄板材.厚度6mm～8mm |
(Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001) |
| DIN EN 351-1-1995 |
木材和木基制品的耐用性.防腐劑處理過的木材.第1部分:防腐劑滲透和滯留的分類 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention; German version EN 351-1:1995) |
| DIN EN 351-2-1995 |
木材和木基制品的耐用性.防腐劑處理過的木材.第2部分:用防腐劑處理過的木材的分析取樣指南 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood; German version EN 351-2:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com