標準號 |
中文名稱 |
英文名稱 |
| DIN 45671-2-2001 |
工作現場的機械振動測量.第2部分:測量方法 |
(Measurement of occupational vibration immissions - Part 2: Measurement method) |
| DIN 45671-2/A1-1997 |
工作現場的機械振動測量.第2部分:測量方法.修正1 |
(Measurement of occupational vibration immission - Part 2: Measuring method; Amendment 1) |
| DIN 45671-3-1997 |
工作現場的機械振動測量.震動儀表的試驗(刻度和評定).初檢,復檢核實,中間檢查,現場檢查 |
(Measurement of occupational vibration immissions - Part 3: Test (calibration and assessment) of the vibration meter; primary test, verification, intermediate test, check in situ) |
| DIN 45672-1-1991 |
鐵路運輸系統的振動測量.測量方法 |
(Vibration measurement associated with railway traffic systems; measuring method) |
| DIN 45672-2-1995 |
鐵路運輸系統的振動測量.第2部分:評估方法 |
(Vibration measurement associated with railway traffic systems - Part 2: Evaluation method) |
| DIN 45673-1-2000 |
機械振動.鐵路軌道用彈性件.第1部分:靜態和動態特征的實驗室測定 |
(Mechanical vibration - Resilient elements used in railway tracks - Part 1: Laboratory determination of static and dynamic characteristics) |
| DIN 45673-2-2001 |
機械振動.鐵路軌道用彈性件.第2部分:在運行狀態下鐵軌的靜態和動態特征的測定 |
(Mechanical vibration - Resilient elements used in railway tracks - Part 2: Determination of static and dynamic characteristics in the track under operation) |
| DIN 45675-3-1987 |
機械振動對于——臂系統的影響.帶內燃機的自由切割設備振動的測定 |
(Exposure to mechanical vibration transmitted to the hand-arm system; measurement of vibration induced by portable, internal combustion engine brush saws) |
| DIN 45675-4-1987 |
機械振動對手和臂系統的影響.手提鑿巖機振動的測量 |
(Exposure to mechanical vibration transmitted to the hand-arm system; measurement of vibration induced by drilling hammers) |
| DIN 45676-2003 |
人體的驅動點機械阻抗和傳遞函數 |
(Mechanical impedances at the driving point and transfer functions of the human body) |
| DIN 45677-2001 |
在驅動點上人體手臂系統所受到的機械阻抗 |
(Mechanical impedance of the human hand-arm system at the driving point) |
| DIN 45678-1994 |
機械振動.半掛車.判定車位振動的試驗室法 |
(Mechanical vibration - Articulated trucks - Laboratory method for evaluating vehicle seat vibration) |
| DIN 45679-2005 |
機械振動.遭受振動的手臂體系評定用夾緊力和進刀力的測量和評價 |
|
| DIN 45680 Bb.1-1997 |
鄰里中低頻躁音侵入的測量和評定.工業設施的評定說明 |
(Measurement and assessment of low-frequency noise immissions in the neighbourhood - Guidelines for the assessment for industrial plants) |
| DIN 45680-1997 |
鄰里中低頻躁音侵入的測量和評定 |
(Measurement and assessment of low-frequency noise immissions in the neighbourhood) |
| DIN 45682-2002 |
聲音排放圖 |
(Sound immission maps) |
| DIN 4569-1997 |
梯級.概念.功能尺寸.要求.檢驗 |
(Steps - Terms functional sizes, requirements, testing) |
| DIN 45690 Bb.1-1999 |
平衡機.保護裝置和其它安全措施.概述.適用限制的說明 |
(Balancing machines - Enclosures and other safety measures - General; information on the limits of applicability) |
| DIN 45690-1994 |
平衡機.安全裝置和其他安全措施.總則 |
(Balancing machines; enclosures and other safety measures; general) |
| DIN 4570-1998 |
可移動的頂樓樓梯.安全技術要求和檢驗 |
(Garret stairs - Safaty requirements and testing) |
| DIN 45804-1996 |
指導文件:“ENISO9000:1994“的應用.電子件可靠性標準 |
(Guidance document: Interpretation of “EN ISO 9000:1994“ - Reliability aspects for electronic components; German version CECC 00804:1996) |
| DIN 45808-1996 |
指導文件:塑料包封件的使用和應用 |
(Guidance document: Use and application of plastic encapsulated devices; German version CECC 00808:1996) |
| DIN 45910-11-1985 |
電子件質量評定協調體系.分規范.塑料膜ＭＫＴ電容器 |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed metallized polyethylene terephtalate film dielectric d.c. capacitors) |
| DIN 45910-111-1985 |
電子件質量評定協調體系.分規范.塑料膜ＭＫＴ電容器 |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors) |
| DIN 45910-112-1991 |
電子件質量評定協調體系.詳細規范.用于一般要求.圓柱形.絕緣.印制電路用軸向引線的聚對苯二甲酸乙酯膜MKT |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 630 V, general-purpose grade cylindrical shape, insulated, axial terminations including for printed ci |
| DIN 45910-113-1991 |
電子件質量評定協調體系.詳細規范.用于一般要求.長方形.絕緣.印制電路用單面引線的聚對苯二甲酸乙酯膜MKT |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 50 to 1000 V, general-purpose grade, rectangular shape, insulated, radial terminations for printed circuits, |
| DIN 45910-114-1991 |
電子件質量評定協調體系.詳細規范.用于較高要求.圓柱形.絕緣.印制電路用軸向引線的聚對苯二甲酸乙酯膜MKT |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 630 V, long-life grade, cylindrical shape, insulated, axial terminations, including for printed circui |
| DIN 45910-115-1991 |
電子件質量評定協調體系.詳細規范.用于較高要求.長方形.絕緣.印制電路用單面引線的聚對苯二甲酸乙酯膜MKT |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 400 V, long life grade, rectangular shape, insulated, radial terminations for printed circuits, climat |
| DIN 45910-121-1992 |
電子件質量評定協調體系.空白詳細規范:非液體電解質的鋁電解電容器.質量評定等級E |
(Harmonized system of quality assessment for electronic components; blank detail specification: aluminium electrolytic capacitors non-solid electrolyte; assessment level E) |
| DIN 45910-1210-1993 |
電子件質量評定協調體系.詳細規范.一般要求、圓柱形金屬殼,立式安裝,焊接柱DC6,3至385V液態電解質的極化 |
(Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 6,3 to 385 V, general-purpose grade, cylindrical metal case, vertical mounting, soldering pins, |
| DIN 45910-1211-1993 |
電子件質量評定協調體系.詳細規范.高要求、圓柱形金屬殼.立式安裝.焊接柱DC16至350V液態電解質的極化鋁電 |
(Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 16 to 350 V, long-life grade, cylindrical metal case, vertical mounting, soldering pins, climat |
| DIN 45910-122-1983 |
電子件質量評定協調體系.結構分類表.具有固態電解質的鋁電解電容器（ＣＥＣＣ３０３０２） |
(Harmonized system of quality assessment for electronic components; blank detail specification: aluminium electrolytic capacitors with solid electrolyte) |
| DIN 45910-124-1993 |
電子件質量評定協調體系.詳細規范.一般要求.帶絕緣套管的圓柱形塑料殼或金屬殼.單面引線接頭用DC6.3至385 |
(Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 6,3 to 385 V, general-purpose grade, cylindrical plastic case or metal case with insulation sle |
| DIN 45910-125-1992 |
電子件質量評定協調體系.詳細規范.一般要求用.具有絕緣套和軸向引出線的圓柱形金屬殼體的帶液態電解質的 |
(CEC (Harmonized system of quality assessment for electronic components; detail specification: non-polar aluminium electrolytic capacitors with non-solid electrolyte DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-pu |
| DIN 45910-126-1992 |
電子件質量評定協調體系.分規范:一般要求.帶絕緣包裝的圓柱形金屬外殼、帶導線引引、DC6,3至350V.帶液態 |
(Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte, DC 6,3 to 350 V, general-purpose grade, cylindrical metal case with insulation sleeve, with wire |
| DIN 45910-127-1994 |
電子器件質量評定協調體系.詳細規范.直流40-100V(適用于無極化電位的交流負載)、通用級、帶絕緣套管圓柱 |
(Harmonized system of quality assessment for electronic components; detail specification: Polar aluminium electrolytic capacitors with non solid electrolyte, DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose gr |
| DIN 45910-132-1992 |
電子件質量評定協調體系.分規范:高要求、圓柱形、絕緣、印制電路的軸向連接、DC63至400V額定直流電壓、用 |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polycarbonate film capacitors 63 to 400 V d.c., long-life grade, cylindrical shape, insulated, axial terminations, including for printed circuits (CECC 30 |
| DIN 45910-133-1992 |
電子件質量評定協調體系.分規范:長方形、絕緣、印制電路的徑向連接、DC63至630V額定直流電壓、用噴金屬的 |
(Harmonized system of quality assessment for electronic components; detail specification: metallized polycarbonate film capacitors 63 to 630 V d.c., long-life grade, rectangular shape, insulated, radial terminations, including for printed circuits (CECC 3 |
| DIN 45910-145-1991 |
電子件質量評定協調體系.詳細規范.高要求DC6.3至50V極化鉭電解質電容器.帶固體電解質的鉭燒結陽性.長方形 |
(CECC 30201-030(Harmonized system of quality assessment for electronic components; detail specification: polar tantalum electrolytic capacitors DC 6,3 to 50 V, long-life grade, porous tantalum anode with solid electrolyte, rectangular shaped plastic encap |
| DIN 45910-15-1983 |
電子件質量評定協調體系.分規范.鉭片電容器 |
(Harmonized system of quality assessment for electronic components; sectional specification: tantalum chip capacitors) |
| DIN 45910-151-1983 |
電子件質量評定協調體系.空白詳細規范.鉭片電容器 |
(Harmonized system of quality assessment for electronic components; blank detail specification: tantalum chip capacitors) |
| DIN 45910-16-1991 |
電子件質量評定協調體系.分規范.陶瓷介質的固定電容器.等級1 |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed capacitors of ceramic dielectric, class 1) |
| DIN 45910-161-1991 |
電子件質量評定協調體系.空白詳細規范.具有陶瓷介質的固定電容器.等級1.(CECC30601) |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed capacitors of ceramic dielectric, class 1) |
| DIN 45910-163-1992 |
電子件質量評定協調體系.結構規范:帶陶瓷介質的固定電容器.2級、圓盤形電容器(長方形)、DC63和100V.用人 |
(Harmonized system of quality assessment for electronic components; detail specification: fixed ceramic dielectric capacitors, class 1, disc capacitors (rectangular), DC 63 and 100 V, with isolation sleeve, radial wire leads; climatic category 55/085/21 ( |
| DIN 45910-17-1991 |
電子件質量評定協調體系.分規范.陶瓷介質的固定電容器.等級2.(CECC30700) |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed capacitors of ceramic dielectric, class 2) |
| DIN 45910-171-1991 |
電子件質量評定協調體系.結構規格表.陶瓷介質固定電容器.等級2.質量評定等E(CECC30701) |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed capacitors of ceramic dielectric, class 2; assessment level E) |
| DIN 45910-172-1991 |
電子件質量評定協調體系.結構規格表.陶瓷介質固定電容器.等級2.質量評定等P(CECC30702) |
(Harmonized system of quality assessment for electronic components; detail specification: fixed capacitors of ceramic dielectric, class 2; assessment level P) |
| DIN 45910-173-1992 |
電子件質量評定協調體系.結構規范:帶陶瓷介質的固定電容器.2級、圓盤形電容器(長方形)、DC63和100V.用人 |
(Harmonized system of quality assessment for electronic components; detail specification: fixed ceramic dielectric capacitors, class 2, disc capacitors (rectangular), DC 63 and 100 V, with isolation sleeve, radial wire leads; climatic category 25/085/21 a |
| DIN 45910-18-1982 |
電子件質量評定協調體系.分規范.絕緣層為陶瓷介質的固定電容器（３級介質） |
(Harmonized system of quality assessment for electronic components; sectional specification; fixed ceramic dielectric; capacitors of barrier layer type (dielectric class 3)) |
| DIN 45910-181-1982 |
電子件質量評定協調體系.結構規格表.絕緣層為陶瓷介質的固定電容器（３級介質） |
(Harmonized system of quality assessment for electronic components; blank detail specification; fixed ceramic dielectric; capacitors of barrier layer type (dielectric class 3)) |
| DIN 45910-19-1991 |
電子件質量評定協調體系.分規范.多層陶瓷片狀電容器(CECC32100) |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed multilayer ceramic chip capacitors) |
| DIN 45910-20-1983 |
電子件質量評定協調體系.分規范.１級陶瓷介質固定電容器.旁路電容器 |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed ceramic capacitors of dielectric class 1, for electrical shock hazard protection) |
| DIN 45910-201-1986 |
電子件質量評定協調體系.結構規格表.陶瓷介質固定電容器.1級旁路電容器 |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed ceramic capacitors of dielectric, class 1, for electrical shock hazard protection) |
| DIN 45910-21-1983 |
電子件質量評定協調體系.分規范.陶瓷介質固定電容器.2級旁路電容器 |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed ceramic capacitors of dielectric class 2, for electrical shock hazard protection) |
| DIN 45910-211-1986 |
電子件質量評定協調體系.結構規格表.２級陶瓷介質固定電容器.旁路電容器 |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed ceramic capacitors of dielectric, class 2, for electrical shock hazard protection) |
| DIN 45910-222-1993 |
電子件質量評定協調體系.詳細規范.印制電路用高要求.矩形.絕緣單面連接的DC63V帶聚苯乙烯膜電介質金屬箔 |
(Harmonized system of quality assessment for electronic components; detail specification: polystyrene film dielectric metal foil capacitors DC 63 V; long-life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic category |
| DIN 45910-223-1993 |
電子件質量評定協調體系.詳細規范.印制電路用高要求、矩形、絕緣單面連接的DC63V帶聚苯乙烯膜電介質金屬 |
(Harmonized system of quality assessment for electronic components; detail specification: polystyrene film dielectric metal foil capacitors DC 63 V; long-life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic category |
| DIN 45910-224-1993 |
電子件質量評定協調體系.詳細規范.印制電路用高要求、矩形、絕緣單面連接的DC63至160V帶聚苯乙烯膜電介質 |
(Harmonized system of quality assessment for electronic components; detail specification: polystyrol film dielectric metal foil capacitors DC 63 to 160 V, long-life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic ca |
| DIN 45910-24-1982 |
電子件質量評定協調體系.分規范.云母介質固定電容器 |
(Harmonized system of quality assessment for electronic components; sectional specification; fixed mica dielectric d.c. capacitors) |
| DIN 45910-241-1982 |
電子件質量評定協調體系.結構規格表.云母介質固定電容器 |
(Harmonized system of quality assessment for electronic components; blank detail specification; fixed mica dielectric d.c. capacitors) |
| DIN 45910-252-1991 |
電子件質量評定協調體系.詳細規范.用于一般要求.長方形.絕緣.印制電路用單面引線的聚對苯二甲酸乙酯膜MKT |
(Harmonized system of quality assessment for electronic components; detail specification: polyethylene terephthalate film dielectric metal foil capacitors DC 63 to 400 V, general purpose grade, rectangular shape, insulated, radial terminations for printed |
| DIN 45910-272-1992 |
電子件質量評定協調體系.分規范:高要求、長方形、絕緣、印制電路的單面連接、DC63至630V直流電壓、帶金屬 |
(Harmonized system of quality assessment for electronic components; detail specification: polypropylene film dielectric metal foil capacitors DC 63 V, long-life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic catego |
| DIN 45910-273-1992 |
電子件質量評定協調體系.分規范:高要求、長方形、絕緣、印制電路的單面連接、DC63至630V直流電壓.帶金屬 |
(Harmonized system of quality assessment for electronic components; detail specification: polypropylene film dielectric metal foil capacitors DC 63 to 100 V, long-life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic |
| DIN 45910-274-1992 |
電子件質量評定協調體系.分規范:通用、圓柱形、絕緣、印制電路的單面連接、DC63至630V直流電壓、帶金屬膜 |
(Harmonized system of quality assessment for electronic components; detail specification: polypropylene film dielectric metal foil capacitors DC 63 to 630 V, general-purpose grade, cylindrical shape, insulated, radial terminations for printed circuits, cl |
| DIN 45910-28-1991 |
電子件質量評定協調體系.分規范.塑料膜MKT片電容器(CECC32200) |
(Harmonized system of quality assessment for electronic components; sectional specification: fixed chip capacitors with metallized electrodes and polyethylene-terephthalate dielectric for direct current.) |
| DIN 45910-281-1991 |
電子件質量評定協調體系.結構規格表.塑料膜MKT片電容器(CECC32201) |
(Harmonized system of quality assessment for electronic components; blank detail specification: fixed chip capacitors with metallized electrodes and polyethylene-terephthalate dielectric for direct current.) |
| DIN 45922-1-1984 |
電子件質量評定協調體系.基本分類.電位器（CECC41000） |
(Harmonized system of quality assessment for electronic components; generic specification: potentiometers) |
| DIN 45922-11-1987 |
電子件質量評定協調體系.分類規格.通過螺紋桿調節或直接旋轉調節的微調電位器（CECC41100） |
(Harmonized system of quality assessment for electronic components; sectional specification: lead screw actuated and rotary preset potentiometers) |
| DIN 45922-112-1979 |
電子件質量評定協調體系.分類規格.微調電位器.（質量評定級M）（CECC1102） |
(Harmonized system of quality assessment for electronic components; blank detail specification: preset potentiometers (assessment level M)) |
| DIN 45922-115-1984 |
電子件質量評定協調體系.結構規格表.帶螺桿的微調電位器(CECC41001-801).3%穩定性.55/125/21)CECC44101-8 |
(Harmonized system of quality assessment for electronic components; detail specifications: non-wirewound leadscrew actuated preset potentiometers; CECC 41101-801: 3 % stability: 55/125/21, CECC 41101-802: 2 % stability: 55/125/56) |
| DIN 45922-12-1979 |
電子件質量評定協調體系.分類規格.高負荷電位器.（CECC41200） |
(Harmonized system of quality assessment for electronic components; sectional specification: power potentiometers) |
| DIN 45922-121-1979 |
電子件質量評定協調體系.分類規格.高負荷電位器（質量評定級S）（CECC41201） |
(Harmonized system of quality assessment for electronic components; blank detail specification: power potentiometers (assessment level S)) |
| DIN 45922-122-1979 |
電子件質量評定協調體系.分類規格.高負荷電位器（質量評定級Ｍ）（CECC41202） |
(Harmonized system of quality assessment for electronic components; blank detail specification: power potentiometers (assessment level M)) |
| DIN 45922-13-1979 |
電子件質量評定協調體系.分類規格.低負荷單匝旋轉電位器（CECC41300） |
(Harmonized system of quality assessment for electronic components; sectional specification: low power single turn rotary potentiometers) |
| DIN 45922-131-1979 |
電子件質量評定協調體系.分類規格.低負荷單匝旋轉電位器（質量檢定級S）（CECC41301） |
(Harmonized system of quality assessment for electronic components; blank detail specification: low power single turn rotary potentiometers (assessment level S)) |
| DIN 45922-14-1983 |
電子件質量評定協調體系.分類規格.精密旋轉電位器（CECC41400） |
(Harmonized system of quality assessment for electronic components; sectional specification: rotary precision potentiometers) |
| DIN 45922-141-1979 |
電子件質量評定協調體系.空白詳細規范.精密旋轉電位計(質量認證等級S) |
(Harmonized system of quality assessment for electronic components; blank detail specification: rotary precision potentiometers (assessment level S)) |
| DIN 45923-1-1983 |
電子件質量評定協調體系.分類基本規格.變阻器 |
(Harmonized system of quality assessment for electronic components; generic specification: varistors) |
| DIN 45923-11-1982 |
電子件質量評定協調體系.分類規格.主要用于電話機的低壓變阻器 |
(Harmonized system of quality assessment for electronic components; sectional specification: low voltage varistors primarily for telephony applications) |
| DIN 45923-111-1979 |
電子件質量評定協調體系.分類規格表:優選用于電話機(質量認證等級P)的低壓變阻器(CECC42101) |
(Harmonized system of quality assessment for electronic components; blank detail specification: low voltage varistors primarily for telephony applications (assessment level P)) |
| DIN 45923-112-1982 |
電子件質量評定協調體系.分類規范.主要用于電話機的低壓變阻器.一側引出接頭線的片狀結構.涂漆的０·４W. |
(Harmonized system of quality assessment for electronic components; detail specification: low voltage varistors primarily for telephony applications; disc type, with unidiretional wire terminations: protected 0,4 W: assessment level P) |
| DIN 45923-113-1982 |
電子件質量評定協調體系.分類規范.主要用于電話機的低壓變阻器.一側引出接頭線的片狀結構.涂漆１·０W質 |
(Harmonized system of quality assessment for electronic components; detail specification: low voltage varistors primarily for telephony applications; disc type, with unidiretional wire terminations: protected 1,0 W: assessment level P) |
| DIN 45923-114-1982 |
電子件質量評定協調體系.分類規范.主要用于電話機的低壓變阻器.一側引出接頭線的片狀結構.涂漆０·１W.質 |
(Harmonized system of quality assessment for electronic components; detail specification: low voltage varistors primarily for telephony applications; disc type, with unidiretional wire terminations: protected 0,1 W: assessment level P) |
| DIN 45940-1104-1982 |
電子件質量評定協調體系.系列規范 |
(Harmonized system of quality assessment for electronic components; family specification) |
| DIN 45940-1128-1983 |
電子器件質量評定協調體系.空白詳細規范.易熔鏈接可編程只讀存儲硅單片集成電路 |
(Harmonized system of quality assessment for electronic components; blank detail specification; fusible link programmable read only memories, silicon monolithic integrated circuits) |
| DIN 45940-1130-1989 |
電子件質量評定協調體系.空白詳細規范.集成UV-可消磁電的可編程序的MOS恒量存儲電路 |
(Harmonized system of quality assessment for electronic components; blank detail specification: MOS ultra-violet light erasable electrically programmable read only memories silicon monolithic circuits) |
| DIN 45940-1131-1989 |
電子件質量評定協調體系.空白詳細規范.集成UV-可消磁電的可編程序的MOS恒量存儲電路 |
(Harmonized system of quality assessment for electronic components; blank detail specification: MOS read/write static memories silicon monolithic circuits) |
| DIN 45940-1132-1989 |
電子件質量評定協調體系.空白詳細規范.集成UV-可消磁電的可編程序的MOS恒量存儲電路 |
(Harmonized system of quality assessment for electronic components; blank detail specification: MOS read/wirte dynamic memories silicon monolithic circuits) |
| DIN 45940-12-1985 |
電子件質量評定協調體系.分規范:模似式單片集成電路 |
(Harmonized system of quality assessment for electronic components; sectional specification: analogue monolithic integrated circuits) |
| DIN 45940-1203-1987 |
電子件質量評定協調體系.詳細空白規范:模擬集成電路(CECC90203) |
(Harmonized system of quality assessment for electronic components; blank detail specification; integrated analogue switching circuits) |
| DIN 45940-1301-1989 |
電子件質量評定協調體系.空白詳細規范:集成線路傳送器和/或接收器(CECC90301) |
(Harmonized system of quality assessment for electronic components; blank detail specification: integrated line transmitters and/or receivers) |
| DIN 45940-1302-1987 |
電子件質量評定協調體系.空白詳細規范:集成電路電壓比較器(CECC90302) |
(Harmonized system of quality assessement for electronic components; blank detail specification: integrated voltage comparators) |
| DIN 45941-1-1985 |
電子件質量評定協調體系.專業基本規范；集成混合膜電路(CECC63000) |
(Harmonized system of quality assessment for electronic components; generic specification: film and hybrid integrated circuits) |
| DIN 45941-11-1987 |
電子件質量評定協調體系.分規范:混合集成電路和薄膜集成電路(性能檢驗)(CECC63200) |
(Harmonized system of quality assessment for electronic components; sectional specification: film and hybrid integrated circuits (capability approval)) |
| DIN 45941-1101-1985 |
電子件質量評定協調體系.分規范；集成混合膜電路.能力認可(CECC63201) |
(Harmonized system of quality assessment for electronic components; blank detail specification: film and hybrid integrated circuits (capability approval)) |
| DIN 45960-11-1980 |
電子件質量評定協調體系.分類規格.機電配電繼電器 |
(Harmonized system of quality assessment for electronic components; sectional specification: electromechanical all-or-nothing relays) |
| DIN 45970-13-1983 |
電子件質量評定協調系統.分規范:大功率電子件用磁氧鐵芯 |
(Harmonized system of quality assessment for electronic components; sectional specification: magnetic oxide cores for power application) |
| DIN 45980-1-1977 |
電子件質量評定協調體系.分類規范.空間電荷控制的電子管 |
(Harmonized system of quality assessment for electronic components; generic specification: space-charge controlled tubes) |
| DIN 45980-1002-1977 |
電子件質量評定協調體系.分類規范.工業振蕩器三極管 |
(Harmonized system of quality assessment for electronic components; blank detail specification: industrial heating triodes) |
| DIN 45980-1003-1977 |
電子件質量評定協調體系.分類規范.陽極損耗功率在1KW以內的小型發射管 |
(Harmonized system of quality assessment for electronic components; blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW) |
| DIN 45980-1004-1978 |
電子件質量評定協調體系.分類規范.功率盤封管 |
(Harmonized system of quality assessment for electronic components; blank detail specification: disk seal power tubes) |
| DIN 45980-1040-1983 |
電子件質量評定協調體系.分類規范.氣冷功率盤封三極管 |
(Harmonized system of quality for electronic components; detail specification: air cooled disk seal power tube) |
| DIN 45983-1-1977 |
電子件質量評定協調體系.專業基本規范.冷陰極指示管 |
(Harmonized system of quality assessment for electronic components; generic specification: cold cathode indicator tubes) |
| DIN 45983-1001-1977 |
電子件質量評定協調體系.結構規格表.冷陰極指示管 |
(Harmonized system of quality assessment for electronic components; blank detail specification: cold cathode indicator tubes) |
| DIN 45999-1-1981 |
電子件質量評定協調體系.普通分類.高頻同軸接插件 |
(Harmonized system of quality assessment for electronic components; generic specification; radio frequency coaxial connectors) |
| DIN 45999-111-1981 |
電子件質量評定協調體系.結構規格表.高頻同軸接插件.BNC系列 |
(Harmonized system of quality assessment for electronic components; blank detail specification; radio frequency coaxial connectors, series BNC) |
| DIN 45999-112-1983 |
電子件質量評定協調體系.結構規格表.高頻同軸接插件.SMA系列 |
(Harmonized system of quality assessment for electronic components; blank detail specification; radio frequency coaxial connectors, series SMA) |
| DIN 45999-113-1985 |
電子件質量評定協調體系.結構規格表.高頻同軸接插件.SMB系列 |
(Harmonized system of quality assessment for electronic components; blank detail specification: radio frequency connectors; series SMB) |
| DIN 45999-114-1985 |
電子件質量評定協調體系.結構規格表.高頻同軸接插件.SMC系列 |
(Harmonized system of quality assessment for electronic components; blank detail spezification: radio frequency coaxial connectors; series SMC) |
| DIN 45999-115-1985 |
電子件質量評定協調體系.結構規格表.高頻同軸接插件.7/16系列 |
(Harmonized system of quality assessment for electronic components; blank detail specification: radio frequency connectors; series 7-16) |
| DIN 46001-1977 |
開關的固定手柄.壓有芯子的塑料制件 |
(Fixed handles for switch gears) |
| DIN 46008-1987 |
接地和保護線連接螺栓的整平.52KV以下電壓的測定 |
(Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV) |
| DIN 46011-1985 |
電壓在５２ＫＶ以上的開關設備的接地終端.主要尺寸.配置 |
(Earthing terminals for substations with rated voltages of 52 kV and higher; principal dimensions, coordination) |
| DIN 46062-1970 |
直流電動機和交流匯流環轉子電動機的起動器 |
(Starter for d.c.-motors and a.c.-slip-ring induction motors) |
| DIN 461-1973 |
坐標系圖示法 |
(Graphical Representation in Systems of Coordinates) |
| DIN 46199-5-1976 |
電器開關設備.時間繼電器的接頭標記 |
(Terminal markings of specified-time relays) |
| DIN 46199-6-1974 |
電器開關設備.壓力和溫度開關設備的接頭標記 |
(Electrical switchgear; terminal markings for pressure and temperature, sensitive devices) |
| DIN 46199-7-1977 |
電器開關設備.冷藏和冷凍設備中熱敏開關設備的接頭標記 |
(Electrical switchgear; designation of connection at temperature sensitive devices in refrigerators and freezers) |
| DIN 462-1973 |
機床.按DIN1804鉤形扳手用開槽圓螺母帶內舌的止動墊圈 |
(Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804) |
| DIN 4620-1992 |
板簧用熱軋圓形窄邊彈簧鋼.尺寸.極限偏差.重量.靜態值 |
(Spring steel; hot rolled, with rounded edges for leaf springs; dimensions, tolerances, masses, sectional properties) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com