標準號 |
中文名稱 |
英文名稱 |
| EN ISO 6330-2000 |
紡織品試驗時采用的家庭洗滌和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000) |
| EN ISO 6346-1995 |
集裝箱代碼、識別和標記 |
Freight containers - Coding, identification and marking (ISO 6346:1995) |
| EN ISO 6360-1-2004 |
牙醫學.旋轉器械的數字編碼系統.第1部分:一般特點 |
|
| EN ISO 6360-2-2004 |
牙科學.旋轉器械用數字編碼體系.第2部分:形狀 |
|
| EN ISO 6360-4-2004 |
牙科學.旋轉器械數字編碼體系.第4部分:金剛石器械的特性 |
|
| EN ISO 6360-6-2004 |
牙科學.旋轉器械數字編碼體系.第6部分:磨削器械特性 |
|
| EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第1部分:褲型撕裂法 |
|
| EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第2部分:埃爾曼多法 |
|
| EN ISO 6385-2004 |
工作系統設計的人類工效原則 |
|
| EN ISO 6401-2004 |
塑料.氯乙烯均聚物和共聚物樹脂.剩余氯乙烯單體的測定.氣相色譜法 |
|
| EN ISO 6402-1-2002 |
塑料丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| EN ISO 6402-2-1999 |
塑料耐沖擊丙烯腈/苯乙烯模塑和擠塑材料(ASE,AES,ACS),丁二烯改型除外第２部分：試驗樣品的準備與性能 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994) |
| EN ISO 6410-1-1996 |
技術制圖螺釘和螺紋部件第1部分：通用規范 |
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993) |
| EN ISO 6410-2-1996 |
技術制圖螺釘和螺紋部件第2部分：螺蚊嵌鑲件 |
Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993) |
| EN ISO 6410-3-1996 |
技術制圖螺釘和螺紋部件第3部分：簡化表示 |
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:1993) |
| EN ISO 6411-1997 |
技術制圖中心孔的簡化畫法 |
Technical drawings - Simplified representation of centre holes (ISO 6411:1982) |
| EN ISO 6412-1-1994 |
技術制圖管道的簡化表示法第1部分：通則和正交表示法 |
Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:1989) |
| EN ISO 6412-2-1994 |
技術制圖管道的簡化表示法第2部分：等角投影 |
Technical drawings - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:1989) |
| EN ISO 6412-3-1996 |
技術制圖管道的簡化表示法第3部分：通風和排放系統終端部件 |
Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:1993) |
| EN ISO 6413-1994 |
技術制圖花鍵和鋸齒型花鍵的表示法 |
Technical drawings - Representation of splines and serrations (ISO 6413:1988) |
| EN ISO 6414-1994 |
玻璃器皿的技術制圖 |
Technical drawings for glassware (ISO 6414:1982) |
| EN ISO 642-1999 |
鋼末端淬透性試驗(喬米尼試驗) |
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN ISO 6427-1998 |
塑料有機溶劑萃取物的測定(常規法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992) |
| EN ISO 6428-1999 |
技術制圖微縮復制的要求 |
Technical drawings - Requirements for microcopying (ISO 6428:1982) |
| EN ISO 643-2003 |
鋼表觀粒度的微觀測定 |
Steels - Micrographic determination of the apparent grain size (ISO 643:2003) |
| EN ISO 6433-1994 |
技術制圖零件標引 |
Technical drawings - Item references (ISO 6433:1981) |
| EN ISO 6468-1996 |
水質有機氯殺蟲劑、多氯聯苯和氯苯類的測定液體之間萃取后的氣相色譜法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction (ISO 6468:1996) |
| EN ISO 6506-1-1999 |
金屬材料布氏硬度試驗第1部分：試驗方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999) |
| EN ISO 6506-2-1999 |
金屬材料布氏硬度試驗第2部分：試驗機器的驗證和校準 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:1999) |
| EN ISO 6506-3-1999 |
金屬材料布氏硬度試驗第3部分：基準塊的校準 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999) |
| EN ISO 6507-1-1997 |
金屬材料維氏硬度試驗第1部分：試驗方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997) |
| EN ISO 6507-2-1997 |
金屬材料維氏硬度試驗第2部分：試驗機器的驗證 |
Metallic materials - Vickers hardness test - Part 2: Verification of testing machines (ISO 6507-2:1997) |
| EN ISO 6507-3-1997 |
金屬材料維氏硬度試驗第3部分：基準塊的校準 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997) |
| EN ISO 6508-1-1999 |
金屬材料洛氏硬度試驗第1部分：試驗方法(A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)(ISO 6508-1:1999) |
| EN ISO 6508-2-1999 |
金屬材料洛氏硬度試驗第2部分：試驗機器的驗證和校準 (A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, NT 6508-2:1999) |
| EN ISO 6508-3-1999 |
金屬材料布氏硬度試驗第3部分：基準塊的校準(A,B,C,D,E,F,G,H,K,N,T) |
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)(ISO 6508-3:1999) |
| EN ISO 6509-1995 |
金屬與合金的腐蝕黃銅耐脫鋅性的測定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN ISO 6520-1-1998 |
焊接和相關工藝金屬材料中幾何缺陷的分類第1部分：熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998) |
| EN ISO 6520-2-2001 |
焊接和相關工藝金屬材料中幾何缺陷的分類第2部分：壓力焊接 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001) |
| EN ISO 6529-2001 |
防護服化學制品的防護防護服材料對水和氣的抗?jié)B透性測試 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
| EN ISO 6551-1995 |
石油液體和氣體動態測量的精度和可靠性電脈沖數據和／或電子脈沖數據的電纜傳輸 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982) |
| EN ISO 6570-2004 |
天然氣.烴液潛在含量的測定.重量分析法 |
|
| EN ISO 6579-2002 |
食品及動物飼料微生物學 檢測沙門氏菌spp的水平法（ISO 6579:1993，修改） |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp (ISO 6579:2002) |
| EN ISO 658-2002 |
油籽雜質含量的測定 |
Oilseeds - Determination of content of impurities (ISO 658:2002) |
| EN ISO 659-1998 |
油籽含油量的測定(參照法) |
Oilseeds - Determination of oil content (Reference method) (ISO 659:1998) |
| EN ISO 660-1999 |
動植物油脂酸價和酸度的測定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996) |
| EN ISO 6603-1-2000 |
塑料硬質塑料沖孔性能的測定第1部分：非儀器沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
| EN ISO 6603-2-2000 |
塑料硬質塑料沖孔性能的測定第2部分：儀器沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
| EN ISO 661-1995 |
動植物油脂試樣的制備 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989) |
| EN ISO 662-2000 |
動植物油脂水分和揮發物含量的測定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998) |
| EN ISO 663-2001 |
動植物油脂不溶性雜質含量的測定 |
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2000) |
| EN ISO 664-1995 |
含油種籽實驗室試樣縮分為試驗試樣 |
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990) |
| EN ISO 665-2000 |
油籽水分和揮發物含量的測定 |
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000) |
| EN ISO 6682-1995 |
土方機械操縱的舒適區域和可及范圍 |
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986 including Amendment 1:1989) |
| EN ISO 6683-1999 |
土方機械座椅安全帶和座椅安全帶固定器 |
Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990) |
| EN ISO 6708-1995 |
管件公稱尺寸的定義和選擇 |
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 6721-1-2002 |
塑料動態機械性能的測定第1部分：一般原則 |
Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001) |
| EN ISO 6721-2-1996 |
塑料動態機械性能的測定第2部分：扭擺法 |
Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995) |
| EN ISO 6721-3-1996 |
塑料動態機械性能的測定第3部分：彎曲振動共振法 |
Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:1994, including Technical Corrigendum 1:1995) |
| EN ISO 6743-4-2001 |
潤滑劑、工業潤滑油和有關產品(L類)分類第4部分：H組(液壓系統) |
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999) |
| EN ISO 6744-1-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第1部分:通用試驗方法 |
|
| EN ISO 6744-2-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第2部分:鄰苯二甲酸酐含量的測定 |
|
| EN ISO 6744-3-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第3部分:非皂化物含量的測定 |
|
| EN ISO 6744-4-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第4部分:脂肪酸含量的測定 |
|
| EN ISO 6789-2003 |
螺釘和螺母裝配工具 手動扭矩工具 設計的一致性試驗、質量的一致性試驗和重新校準程序的條件和試驗方法 |
Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
| EN ISO 6800-1997 |
動植物油脂兩種狀態三酸甘油酯中脂肪酸成分的測定 |
Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997) |
| EN ISO 6803-1997 |
橡膠或塑料軟管和軟管組件無彎曲的液壓脈沖試驗 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994) |
| EN ISO 6806-1995 |
油燃燒器用軟管和軟管組件規范 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992) |
| EN ISO 6808-2000 |
給排油用塑料軟管和軟管組件規范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999) |
| EN ISO 6817-1995 |
封閉管道中導電液體流量的測量采用電磁流率計的方法 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters (ISO 6817:1992) |
| EN ISO 683-17-1999 |
熱處理鋼、合金鋼和易切鋼第17部分：滾球和滾柱軸承鋼 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999) |
| EN ISO 6845-2003 |
表面活性劑 工業用堿性磺酸鹽 堿性單磺酸鹽的平均相對分子量和堿性單磺酸鹽含量的測定 |
Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989) |
| EN ISO 6847-2001 |
焊接耗材化學分析用焊接金屬的熔敷 |
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000) |
| EN ISO 6860-1995 |
色漆和清漆彎曲試驗(錐體心軸) |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984) |
| EN ISO 6865-2000 |
動物飼料粗纖維含量的測定中級過濾法 |
Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000) |
| EN ISO 6867-2000 |
動物飼料維生素Ｅ含量的測定高效液相色譜法 |
Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000) |
| EN ISO 6869-2000 |
動物飼料鈣、銅、鐵、鎂、錳、鉀、鈉和鋅含量的測定原子吸收光譜法 |
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000) |
| EN ISO 6871-2-1996 |
牙科賤金屬鑄造合金第2部分：鎳基合金 |
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994) |
| EN ISO 6872-1998 |
牙科烤瓷 |
Dental ceramic (ISO 6872:1995) |
| EN ISO 6873-2000 |
牙科石膏制品 |
Dental gypsum products (ISO 6873:1998) |
| EN ISO 6875-1996 |
牙科設備牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995) |
| EN ISO 6876-2002 |
牙根管充填材料 |
Dental root canal sealing materials (ISO 6876:2001) |
| EN ISO 6877-1998 |
牙科牙根管充填尖(牙膠尖) |
Dental root-canal obturating points (ISO 6877:1995) |
| EN ISO 6878-2004 |
水質.磷的測定.第1部分:鉬酸銨的光譜測定法 |
|
| EN ISO 6885-2000 |
動植物油脂茴香胺值的測定 |
Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:1998) |
| EN ISO 6887-1-1999 |
食品和動物飼料的微生物學用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的制備第1部分：初始懸浮和 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO 6887-1) |
| EN ISO 6887-2-2003 |
食品和動物飼料的微生物學用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的制備第2部分：肉與肉類產 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO 6887-2:2003) |
| EN ISO 6887-3-2003 |
食品和動物飼料的微生物學用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的制備第3部分：魚和魚業產 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery products (ISO 6887-3:2003) |
| EN ISO 6887-4-2003 |
食品和動物飼料的微生物學用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的制備第4部分：牛奶與牛奶 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and me |
| EN ISO 6888-3-2003 |
食品和動物飼料的微生物學 凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法第3部分：微量探 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003) |
| EN ISO 6926-2001 |
聲學聲功率級測定用的基準聲源的性能和校正的要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000) |
| EN ISO 694-2001 |
船舶與海上技術磁羅盤在船上定位 |
Ships and marine technology - Positioning of magnetic compasses in ships (ISO 694:2000) |
| EN ISO 6940-1995 |
紡織織物燃燒性能垂直向樣品易點燃性的測定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:1984, including Amendment 1:1993) |
| EN ISO 6940-2004 |
紡織織物.燃燒性能.垂直向樣品易點燃性的測定 |
|
| EN ISO 6941-1995 |
紡織織物燃燒性能垂直向樣品火焰蔓延性的測定 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:1984, including Amendment 1:1992) |
| EN ISO 6942-2002 |
防護服 耐熱和耐火防護 試驗方法：暴露于輻射熱源時對材料和材料套件的評定 |
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN ISO 6947-1997 |
焊接工作位置傾角與轉角的定義 |
Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993) |
| EN ISO 6974-1-2001 |
天然氣用氣相色譜法測定規定的不確定度的組分第1部分：簡明分析導則 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1-2000) |
| EN ISO 6974-2-2002 |
天然氣用氣相色譜法測定規定的不確定度的組分第2部分：測量系統的特性和數據處理的統計 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001) |
| EN ISO 6974-3-2001 |
天然氣用氣相色譜法測定規定的不確定度的組分第3部分：用兩填充柱測定氫、氦、氧、氮、二氧化碳和C8的 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000) |
| EN ISO 6974-4-2001 |
天然氣用氣相色譜法測定規定的不確定度的組分第4部分：用兩柱測定實驗室和在線測量系統用的氮、二氧化 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:20 |
| EN ISO 6974-5-2001 |
天然氣用氣相色譜法測定規定的不確定度的組分第5部分：用三柱測定實驗室和在線外處理用的氮、二氧化碳 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974 |
| EN ISO 6988-1994 |
金屬和其他無機覆蓋層通常凝露條件下的二氧化硫腐蝕試驗 |
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:985) |
| EN ISO 7027-1999 |
水質濁度的測定 |
Water quality - Determination of turbidity (ISO 7027:1999) |
| EN ISO 7029-2000 |
聲學聽閾和年齡的關系的統計分布 |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000) |
| EN ISO 703-1-1999 |
輸送帶撓性驅動和成槽性第1部分：試驗方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999) |
| EN ISO 7040-1997 |
有效力矩型六角螺母(非金屬嵌件)1型性能等級5、8和10級 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997) |
| EN ISO 7042-1997 |
有效力矩型六角螺母性能等級5、8、10和12級 |
Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO 7042:1997) |
| EN ISO 7045-1994 |
Ｈ或Ｚ型十字槽盤頭螺釘產品等級A級 |
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994) |
| EN ISO 7046-1-1994 |
Ｈ或Ｚ型十字槽沉頭(通用頭型)螺釘產品等級A級第1部分：性能等級鋼4.8級 |
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:1994) |
| EN ISO 7046-2-1994 |
十字槽沉頭(通用頭型)螺釘產品等級A級第2部分：性能等級鋼8.8級、不銹鋼和有色金屬 |
Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990) |
| EN ISO 7047-1994 |
Ｈ或Ｚ型十字槽半沉頭(通用頭型)螺釘產品等級A級 |
Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994) |
| EN ISO 7048-1998 |
十字槽圓柱頭螺釘 |
Cross recessed cheese head screws (ISO 7048:1998) |
| EN ISO 7049-1994 |
十字槽盤頭自攻螺釘 |
Cross recessed pan head tapping screws (ISO 7049:1983) |
| EN ISO 7050-1994 |
十字槽沉頭(通用頭型)自攻螺釘 |
Cross recessed countersunk (flat) head tapping screws (common head style) (ISO 7050:1983) |
| EN ISO 7051-1994 |
十字槽半沉頭(通用頭型)自攻螺釘 |
Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983) |
| EN ISO 707-1997 |
乳和乳制品取樣指南 |
Milk and milk products - Guidance on sampling (ISO 707:1997) |
| EN ISO 7083-1994 |
技術制圖幾何形位公差的符號比例和尺寸 |
Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983) |
| EN ISO 7085-1999 |
表面淬硬并回火的米制自擠螺釘機械和工作性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999) |
| EN ISO 7089-2000 |
平墊圈標準系列產品等級A級 |
Plain washers - Normal series - Product grade A (ISO 7089:2000) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com