標準號 |
中文名稱 |
英文名稱 |
| ISO 9845-1-1992 |
太陽能.地面不同接收條件下標準太陽光譜輻射.第1部分:空氣質量1.5直接垂直標準和半球狀太陽輻射 |
(Solar energy; reference solar spectral irradiance at the ground at different receiving conditions; part 1: direct normal and hemispherical solar irradiance for air mass 1,5) |
| ISO 9847-1992 |
太陽能.與標準日射強度計比對校準野外日射強度計 |
(Solar energy; calibration of field pyranometers by comparison to a reference pyranometer) |
| ISO 9848 Technical Corrigendum 1-1994 |
攝影技術.源文件縮微膠卷.ISO 感光度和ISO 平均對比度的測定.技術勘誤1 |
(Photography; source document microfilms; determination of ISO speed and ISO average gradient; technical corrigendum 1) |
| ISO 9848-2003 |
攝影.原始文件縮微膠片.ISO感光速度和ISO平均梯度的測定 |
(Photography - Source document microfilms - Determination of ISO speed and ISO average gradient ) |
| ISO 9848-2003 |
攝影.原始文件縮微膠片.ISO感光速度和ISO平均梯度的測定 |
|
| ISO 9849-2000 |
光學和光學儀器.大地測量和測繪儀器.詞匯 |
(Optics and optical instruments - Geodetic and surveying instruments - Vocabulary) |
| ISO 9851-1990 |
連續機械裝卸設備.架空電動單軌輸送機.定義和安全規則 |
(Continuous mechanical handling equipment; overhead electrical monorail conveyors; definitions and safety rules) |
| ISO 9852-1995 |
未增塑聚氯乙烯管.在規定溫度下抗二氯甲烷腐蝕的性能(DCMT). 二氯甲烷的試驗方法 |
(Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method) |
| ISO 9853-1991 |
壓力管道裝置用噴射鑄造未增塑聚氯乙烯配件的破碎試驗 |
(Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test) |
| ISO 9854-1-1994 |
運輸液體用熱塑性塑料管.利用卻貝法測定擺動沖擊強度試驗.第1部分:一般試驗方法 |
(Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method) |
| ISO 9854-2-1994 |
運輸液體用熱塑性塑料管.利用卻貝法測定擺動沖擊強度試驗.第2部分:不同材料制管的試驗條件 |
(Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials) |
| ISO 9855-1993 |
環境空氣.從濾器中收集到的懸浮粒氣體中鉛粒含量的測定.原子吸收光譜測定法 |
(Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method) |
| ISO 9856-1989 |
輸送帶.彈性模數的測定 |
(Conveyor belts; determination of elastic modulus) |
| ISO 9856-2003 |
輸送帶.彈性和固定延伸率的測定和彈性模量的計算 |
|
| ISO 9862-1990 |
土工織物.取樣和試樣的制備 |
(Geotextiles; sampling and preparation of test specimens) |
| ISO 9863-2-1996 |
土工織物和相關產品.特定壓力下厚度的測定.第2部分:多層制品的單層厚度測定程序 |
(Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products) |
| ISO 9864-1990 |
土工織物.單位面積質量(物質)的測定 |
(Geotextiles; determination of mass per unit area) |
| ISO 9865-1991 |
紡織品.用邦迪斯門雨淋試驗對織物拒水性的測定 |
(Textiles; determination of water repellency of fabrics by the Bundesmann rain-shower test) |
| ISO 9866-1-1991 |
紡織品.低壓下干熱對織物的影響.第1部分:織物干熱處理程序 |
(Textiles; effect of dry heat on fabrics under low pressure; part 1: procedure for dry-heat treatment of fabrics) |
| ISO 9866-2-1991 |
紡織品.低壓下干熱對織物的影響.第2部分:干熱下織物尺寸變化的測定 |
(Textiles; effect of dry heat on fabrics under low pressure; part 2: determination of dimensional change in fabrics exposed to dry heat) |
| ISO 9867-1991 |
紡織品.織物除皺的評定.表觀法 |
(Textiles; evaluation of the wrinkle recovery of fabrics; appearance method) |
| ISO 9869-1994 |
熱絕緣.建筑部件.熱阻及熱傳導的現場測量 |
(Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance) |
| ISO 9873 Technical Corrigendum 1-2000 |
牙科手動設備.可重復使用的鏡子和手柄.技術勘誤1 |
(Dental hand instruments - Reusable mirrors and handles; Technical Corrigendum 1) |
| ISO 9873-1998 |
牙科手動器械.可重復使用的鏡子和手柄 |
(Dental hand instruments - Reusable mirrors and handles) |
| ISO 9874-1992 |
牛奶.總磷含量的測定.分子吸收光譜測定法 |
(Milk; determination of total phosphorus content; method using molecular absorption spectrometry) |
| ISO 9875-2000 |
船舶技術.船用回聲探測設備 |
(Ships and marine technology - Marine echo-sounding equipment) |
| ISO 9876-1997 |
船舶和航海技術.氣象圖用航海傳真接收機 |
(Ships and marine technology - Marine facsimile receivers for meteorological charts) |
| ISO 9878-1990 |
縮微攝影技術.縮微影片攝制用的圖形符號 |
(Micrographics; graphical symbols for use in microfilming) |
| ISO 9882-1993 |
建筑物性能標準.在沒有預澆負載情況下的預制鋼盤鋼筋混凝土地板的性能試驗 |
(Performance standards in building; performance test for precast concrete floors; behaviour under non-concentrated load) |
| ISO 9883-1993 |
建筑物性能標準.在有預澆負載情況下的預制鋼盤鋼筋混凝土地板的性能試驗 |
(Performance standards in building; performance test for precast concrete floors; behaviour under concentrated load) |
| ISO 9884-1-1994 |
茶葉袋規范.第1部分:托盤和集裝箱運輸茶葉用的標準袋 |
(Tea sacks - Specification - Part 1: Reference sack for palletized and containerized transport of tea) |
| ISO 9884-2-1999 |
茶葉袋規范.第1部分:托盤和集裝箱運輸茶葉用袋的性能規范 |
(Tea sacks - Specification - Part 2: Performance specification for sacks for palletized and containerized transport of tea) |
| ISO 9885-1991 |
廣口玻璃容器.頂部密封表面的平面度偏差.試驗方法 |
(Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods) |
| ISO 9886-1992 |
用生理測量法評定熱應變 |
(Evaluation of thermal strain by physiological measurements) |
| ISO 9886-2004 |
人類工效學.熱應變的生理學測量評價 |
|
| ISO 9887-1992 |
水質.含水介質中有機物化合物需氧生物降解性的評定.半連續激活污泥法(SCAS) |
(Water quality; evaluation of the aerobic biodegradability of organic compounds in an aqueous medium; semi-continuous activated sludge method (SCAS)) |
| ISO 9888-1999 |
水質.含水介質中有機化合物需氧生物降解性的評定.靜態試驗(Zahn-Weuens法) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method)) |
| ISO 9889-1994 |
二氧化鈾粉末和二氧化鈾燒結丸的碳含量的測定.電阻爐的燃燒.滴定法/庫侖法/紅外線吸收分析法 |
(Determination of carbon content in uranium dioxide powder and sintered pellets - Resistance furnace combustion - Titrimetric/coulometric/infrared absorption method) |
| ISO 9891-1994 |
二氧化鈾粉末和燒結丸中碳含量的測定.高頻感應燃燒爐.滴定法/庫侖法/紅外線吸收法 |
(Determination of carbon content in uranium dioxide powder and sintered pellets - High-frequency induction furnace combustion - Titrimetric/coulometric/infrared absorption methods) |
| ISO 9892-1992 |
鈾金屬.二氧鈾粉末與二氧化鈾小球和硝酸鈾酸溶液.氟含量的測定.氟化物離子選擇電極法 |
(Uranium metal, uranium dioxide powder and pellets, and uranyl nitrate solutions; determination of fluorine content; fluoride ion selective electrode method) |
| ISO 9894-1996 |
在液相中六氟化鈾二次進樣法 |
(Subsampling of uranium hexafluoride in the liquid phase) |
| ISO 9895-1989 |
紙和紙板.抗壓強度.窄幅試驗 |
(Paper and board; compressive strength; short span test) |
| ISO 9896-1996 |
建筑物內排放管道系統用塑料存水彎管 |
(Plastics traps for discharge pipework systems inside buildings) |
| ISO 9897 Technical Corrigendum 1-2001 |
貨物容器.容器設備數據交換(CEDE).一般通信編碼.技術勘誤1 |
(Freight containers - Container equipment data exchange (CEDEX) - General communication codes; Technical Corrigendum 1) |
| ISO 9897-1997 |
貨運集裝箱.集裝箱要求的數據交換.(CECEX):一般通信代碼 |
(Freight containers - Container equipment data exchange (CEDEX) - General communication codes) |
| ISO 9898-2000 |
作物保護設備.叢生灌木和喬木作物用空氣助動噴射裝置 |
(Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops) |
| ISO 990-1973 |
工業用氫氧化鉀.檢定法 |
(Potassium hydroxide for industrial use; Method of assay) |
| ISO 9902-1-2001 |
紡織機械.噪聲試驗規程.第1部分:通用要求 |
(Textile machinery - Noise test code - Part 1: Common requirements) |
| ISO 9902-2-2001 |
紡織機械.噪聲試驗規程.第2部分:紡紗準備和紡紗機械 |
(Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery) |
| ISO 9902-3-2001 |
紡織機械.噪聲試驗規程.第3部分:非紡織機械 |
(Textile machinery - Noise test code - Part 3: Nonwoven machinery) |
| ISO 9902-4-2001 |
紡織機械.噪聲試驗規程.第4部分:紗的加工、纜索和繩制造用機械 |
(Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery) |
| ISO 9902-5-2001 |
紡織機械.噪聲試驗規程.第5部分:織造和針織用準備機械 |
(Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery) |
| ISO 9902-6-2001 |
紡織機械.噪聲試驗規程.第6部分:制布機械 |
(Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery) |
| ISO 9902-7-2001 |
紡織機械.噪聲試驗規程.第7部分:染色和精整機械 |
(Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery) |
| ISO 9903-1-2003 |
紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第1部分:無互聯鎖或鏈接的底邊 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining) |
| ISO 9903-1-2003 |
紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第1部分:無互聯鎖或鏈接的底邊 |
|
| ISO 9903-2-2003 |
紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第2部分:有互鏈接的底邊 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining) |
| ISO 9903-2-2003 |
紡織機械和附件.梳理機金屬針布用異型鋼絲的主要尺寸.第2部分:有互鏈接的底邊 |
|
| ISO 9904-2000 |
紡織機械和附件.預紡紗和紡紗機用鋼針 |
(Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery) |
| ISO 9905-1994 |
離心泵的技術規范.1類 |
(Technical specifications for centrifugal pumps - Class I) |
| ISO 9906-1999 |
旋轉動力泵.液壓性能驗收試驗.等級1和2 |
(Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2) |
| ISO 9908-1993 |
離心泵的技術規范.類別III |
(Technical specifications for centrifugal pumps; class III) |
| ISO 9909-1997 |
鼠尾草油(藥房常備的鼠尾草) |
(Oil of dalmatian sage (Salvia officinalis L.)) |
| ISO 9910-1991 |
甜橙油.全部類胡羅卜素含量的測定 |
(Oil of sweet orange; determination of the total carotenoids content) |
| ISO 9911-1993 |
農業灌溉設備.手工操做小型塑料閥門 |
(Agricultural irrigation equipment; manually operated small plastics valves) |
| ISO 9912-1-2004 |
農業灌溉設備.微灌溉用過濾器.第1部分:術語、定義和分類 |
|
| ISO 9912-2-1992 |
農業灌溉設備.過濾器.第2部分:篩網型過濾器 |
(Agricultural irrigation equipment; filters; part 2: strainer-type filters) |
| ISO 9912-3-1992 |
農業灌溉設備.過濾器.第3部分:自動清潔篩網型過濾器 |
(Agricultural irrigation equipment; filters; part 3: automatic self-cleaning strainer-type filters) |
| ISO 9913-1-1996 |
光學和光學儀器.接觸鏡片.第1部分:用FATT法對氧氣的滲透性和可透性的測定 |
(Optics and optical instruments - Contact lenses - Part 1: Determination of oxygen permeability and transmissibility by the FATT method) |
| ISO 9913-2-2000 |
光學和光學儀器.接觸鏡片.第2部分:用庫侖法測定氧的滲透性和可傳性 |
(Optics and optical instruments - Contact lenses - Part 2: Determination of oxygen permeability and transmissibility by the coulometric method) |
| ISO 9914-1995 |
光學及光學儀器.接觸鏡片.接觸鏡片材料折射指數的測定 |
(Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials) |
| ISO 9915-1992 |
鋁合金鑄件.X射線照相試驗 |
(Aluminium alloy castings; radiography testing) |
| ISO 9916-1991 |
鋁合金和鎂合金鑄件.液體滲透檢驗 |
(Aluminium alloy and magnesium alloy castings; liquid penetrant inspection) |
| ISO 9917 Technical Corrigendum 1-1993 |
牙科用水基膠粘劑.技術勘誤1 |
(Dental water-based cements; technical corrigendum 1) |
| ISO 9917-1-2003 |
牙科.水基膠粘劑.第1部分:酸基粘固粉/液 |
(Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements) |
| ISO 9917-1-2003 |
牙科.水基膠粘劑.第1部分:酸基粘固粉/液 |
|
| ISO 9917-1991 |
牙科用水基膠粘劑 |
(Dental water-based cements) |
| ISO 9917-2-1998 |
牙科用水基粘結劑.第2部分:光敏粘結劑 |
(Dental water-based cements - Part 2: Light-activated cements) |
| ISO 9918-1993 |
人用煙霧測定計.要求 |
(Capnometers for use with humans; requirements) |
| ISO 9919-1992 |
醫用脈沖血氧定量計.要求 |
(Pulse oximeters for medical use; requirements) |
| ISO 992-1975 |
工業用氫氧化鉀.氯化物含量的測定.汞液滴定法 |
(Potassium hydroxide for industrial use; Determination of chlorides content; Mercurimetric method) |
| ISO 9920-1995 |
熱環境中的人類工效學.衣服的隔熱和抗蒸發的評價 |
(Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble) |
| ISO 9921-1-1996 |
語言通信的人類工效學評定.第1部分:在接通話中(用談話語言干擾級別法)有標準聽話能力人的談話語言干擾級別 |
(Ergonomic assessment of speech communication - Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)) |
| ISO 9921-2003 |
人類工效學.語音通訊的評定 |
|
| ISO 9923-1994 |
顯微攝影.透明的A6縮微膠片.圖像安排 |
(Micrographics; transparent A6 microfiche; image arrangements) |
| ISO 9924-1-2000 |
橡膠和橡膠制品.利用熱解重量分析法測定硫化和未硫化化合物的成分.第1部分:丁二烯、乙烯－丙烯共聚物和沅共 |
(Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers) |
| ISO 9924-2-2000 |
橡膠和橡膠制品.利用熱重分析法測定硫化和未硫化化合物的成分.第1部分:丙烯晴丁二烯和丁基鹵橡膠 |
(Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by hermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers) |
| ISO 9926-1-1990 |
起重機.起重機操作員的訓練.第1部分:總則 |
(Cranes; training of drivers; part 1: general) |
| ISO 9927-1-1994 |
起重機的檢驗.第1部分:總則 |
(Cranes - Inspections - Part 1: General) |
| ISO 9928-1-1990 |
起重機.操作手冊.第1部分:總則 |
(Cranes; crane driving manual; part 1: general) |
| ISO 9930-1993 |
綠豆.儲存和冷藏運輸 |
(Green beans; storage and refrigerated transport) |
| ISO 9931-1991 |
煤.直接燃燒煤時煤氣中攜帶粉煤的取樣 |
(Coal; sampling of pulverized coal conveyed by gases in direct fire coal systems) |
| ISO 9932-1990 |
紙和紙板.板材水蒸汽傳遞率的測定.動吹和靜氣法 |
(Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods) |
| ISO 9933 AMD 1-2004 |
纖維增強水泥制品.屋面和覆蓋用大波瓦或非對稱截面瓦和配件.修改件1 |
|
| ISO 9933-1995 |
纖維加強水泥制品.屋頂和鑲面(建筑物)長波紋或不對稱的面板和配件 |
(Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding) |
| ISO 9934-1-2001 |
無損檢驗.磁性粒子試驗.第1部分:一般原則 |
(Non-destructive testing - Magnetic particle testing - Part 1: General principles) |
| ISO 9934-2-2002 |
無損檢驗.磁粒子試驗.第2部分:檢測介質 |
(Non-destructive testing - Magnetic particle testing - Part 2: Detection media) |
| ISO 9934-3-2002 |
無損檢驗.磁性粒子試驗.第3部分:設備 |
(Non-destructive testing - Magnetic particle testing - Part 3: Equipment) |
| ISO 9935-1992 |
無損檢驗.穿透缺陷檢測儀.總技術要求 |
(Non-destructive testing; penetrant flaw detectors; general technical requirements) |
| ISO 9936-1997 |
動植物脂肪油.維生素E和三烯甘油脂含量的測定.高性能液體色譜法 |
(Animal and vegetable fats and oils - Determination of tocopherols and tocotrienols contents - Method using high-performance liquid chromatography) |
| ISO 9938-1994 |
航空航天.聚四氟乙烯軟管總成.204℃/28000KPa類.采購規范 |
(Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification) |
| ISO 9939-1994 |
航空航天. 壓力再加油連接器(新型) |
(Aerospace; pressure re-oiling connection (new type)) |
| ISO 9942-1-1994 |
起重機的信息標簽.第1部分:總則 |
(Cranes - Information labels - Part 1: General) |
| ISO 9942-3-1999 |
起重機.信息標簽.第3部分:塔式起重機 |
(Cranes - Information labels - Part 3: Tower cranes) |
| ISO 9943-1991 |
造船.帶廚具的廚房和配膳室的通風和空氣處理設備 |
(Shipbuilding; ventilation and air-treatment of galleys and pantries with cooking appliances) |
| ISO 9944 Technical Corrigendum 1-1997 |
塑料.酚醛樹脂.樹脂萃取物電導率的測定.技術勘誤表1 |
(Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts; Technical Corrigendum 1) |
| ISO 9944-1990 |
塑料.酚醛樹脂.樹脂萃取物電導率的測定 |
(Plastics; phenolic resins; determination of electrical conductivity of resin extracts) |
| ISO 9946-1999 |
操縱工業機器人.特性表示方法 |
(Manipulating industrial robots - Presentation of characteristics) |
| ISO 9947-1991 |
紡織機械和附件.二合一捻線機.詞匯 |
(Textile machinery and accessories; two-for-one twisters; vocabulary) |
| ISO 9948-1992 |
卡車和公共汽車輪胎.滾動阻力的測定方法 |
(Truck and bus tyres; methods of measuring rolling resistance) |
| ISO 9949-1-1993 |
吸尿器材詞匯.第1部分:尿失禁的狀況 |
(Urine absorbing aids; vocabulary; part 1: conditions of urinary incontinence) |
| ISO 9949-2-1993 |
吸尿器材詞匯.第2部分:產品 |
(Urine absorbing aids; vocabulary; part 2: products) |
| ISO 9949-3-1993 |
吸尿器材詞匯.第3部分:產品類型的識別 |
(Urine absorbing aids; vocabulary; part 3: identification of product types) |
| ISO 9950-1995 |
工業淬火油.冷卻性的測定.鎳合金探測試驗法 |
(Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method) |
| ISO 9951 Technical Corrigendum 1-1994 |
在密封管中氣體流動力的測量.技術勘誤表1 |
(Measurement of gas flow in closed conduits - Turbine meters; Technical Corrigendum 1) |
| ISO 9951-1993 |
用渦輪表測量密閉風道的氣流 |
(Measurement of glas flow in closed conduits; turbine meters) |
| ISO 9952-1993 |
農業灌溉設備.止回閥 |
(Agricultural irrigation equipment; check valves) |
| ISO 9956-1 AMD 1-1998 |
金屬材料焊接程序的認可和規范.第1部分:熔焊的一般規則.第1次修訂 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding; Amendment 1) |
| ISO 9956-1-1995 |
金屬材料焊接程序的認可和規范.第1部分:熔焊的一般規則 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding) |
| ISO 9956-10-1996 |
金屬材料焊接方法的批準和規范.第10部分:電子束焊接方法規范 |
(Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com