標準號 |
中文名稱 |
英文名稱 |
| ISO 13734-1998 |
天然氣.用做增味劑的有機硫化物.要求和試驗方法 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods) |
| ISO 13736-1997 |
石油產品及其他液體.閃點測定.亞伯密封杯法 |
(Petroleum products and other liquids - Determination of flash point - Abel closed cup method) |
| ISO 13737-2004 |
石油產品和潤滑劑.潤滑劑脂的低溫針入度的測定 |
|
| ISO 13738-2000 |
潤滑劑、工業用油和有關制品(L類).E系列(內燃機油).兩沖程汽油發動機油規范(類別EGB、EGC和EGD) |
(Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)) |
| ISO 13740-1998 |
原油及石油產品.運輸?shù)目捎嬎阈?遠洋油輪負載和卸載時容器經驗參數的評估 |
(Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) on ocean-going tanker vessels) |
| ISO 13741-1-1998 |
塑料/橡膠.聚合物彌散體和膠乳(天然的和合成的).用毛細管柱氣相色譜分析法測定殘余單基物和其他有機成分.第 |
(Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injection method) |
| ISO 13741-2-1998 |
塑料/橡膠.聚合物彌散體和膠乳(天然的和合成的).用毛細管柱氣相色譜分析法測定殘余單基物和其他有機成分.第 |
(Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method) |
| ISO 13746-2000 |
紡織地板覆蓋物.樓梯處的鋪設和使用指南 |
(Textile floor coverings - Guidelines for installation and use on stairs) |
| ISO 13747-1999 |
地板覆蓋織物.彈性磚面邊的規格、垂直度和平直度 |
(Textile floor coverings - Determination of size, squareness and straightness of edge of tiles) |
| ISO 13750-2000 |
紡織地板覆蓋物.耐酸性食物染色的測定 |
(Textile floor coverings - Determination of resistance to staining by acid food colours) |
| ISO 13752-1998 |
空氣質量.作為基準使用的第2種現場測量方法的不確定性評定 |
(Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference) |
| ISO 13753-1998 |
機械振動和沖擊.手-臂振動.手-臂體系荷載時彈性材料振動可傳遞性的測量方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system) |
| ISO 13754-1999 |
紡織機械和附件.抽紗和經紗紡錘用六角螺母和槽頂螺母 |
(Textile machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles) |
| ISO 13756-1997 |
珠寶合金用銀的測定.容量法(電位滴定法)用氯化鈉或氯化鉀 |
(Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride) |
| ISO 13757-1996 |
液化石油氣.油殘余物的測定.高溫法 |
(Liquefied petroleum gases - Determination of oily residues - High-temperature method) |
| ISO 13758-1996 |
液化石油氣.丙烷干燥度的評定.真空凍結法 |
(Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method) |
| ISO 13759-1996 |
石油產品.用光譜測定法對柴油燃料中硝酸烷基酯的測定 |
(Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method) |
| ISO 13760-1998 |
壓力下流體運輸用塑料管.Miner法則.累積損傷的計算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner`s rule - Calculation method for cumulative damage) |
| ISO 13761-1996 |
塑料管及配件.20℃以上使用的聚乙烯管道的壓力減低因素 |
(Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 C) |
| ISO 13764-1996 |
空間數據和信息傳送系統.標準格式化數據單.控制權限程序 |
(Space data and information transfer systems - Standard formatted data units - Control authority procedures) |
| ISO 13765-1-2004 |
耐熔灰漿.第1部分:使用滲透錐法測定一致性 |
|
| ISO 13765-2-2004 |
耐熔灰漿.第2部分:使用往復流動表法測定一致性 |
|
| ISO 13765-3-2004 |
耐熔灰漿.第3部分:連接穩定性的測定 |
|
| ISO 13765-4-2004 |
耐熔灰漿.第4部分:撓曲粘接強度的測定 |
|
| ISO 13765-5-2004 |
耐熔灰漿.第5部分:粒度分布的測定(篩析法) |
|
| ISO 13765-6-2004 |
耐熔灰漿.第6部分:預拌灰漿的水分含量的測定 |
|
| ISO 13766-1999 |
土方機械.電磁兼容性 |
(Earth-moving machinery - Electromagnetic compatibility) |
| ISO 13769 AMD 1-2003 |
氣瓶.鋼印標記 |
(Gas cylinders - Stamp marking) |
| ISO 13769 AMD 1-2003 |
氣瓶.鋼印標記 |
|
| ISO 13769-2002 |
氣瓶.印花標記 |
(Gas cylinders - Stamp marking) |
| ISO 13770-1997 |
鋁合金氣體儲瓶.避免頸肩爆裂的操作要求 |
(Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks) |
| ISO 13772-1997 |
林業機械.便攜式鏈鋸.非手動鏈鋸制動器的性能 |
(Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance) |
| ISO 13772-2004 |
林業機械.便攜式鏈鋸.非手動鏈制動器的性能 |
|
| ISO 13773-1997 |
橡膠.聚氯丁膠乳.含堿量的測定 |
Rubber - Polychloroprene latex - Determination of alkalinity |
| ISO 13774-1998 |
內燃機燃料用橡膠和塑料軟管.易燃性試驗方法 |
Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability |
| ISO 13775-1-2000 |
汽車用熱塑管和軟管.第1部分:非燃料應用 |
Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications |
| ISO 13775-2-2000 |
汽車用熱塑管和軟管.第2部分:石油類燃料應用 |
(Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications) |
| ISO 13778-1999 |
滑動軸承.薄壁半軸承的質量保證.窄間隙域軸承的選擇組件 |
(Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range) |
| ISO 13779-1-2000 |
外科植入物.羥磷灰石.第1部分:陶瓷羥磷灰石 |
(Implants for surgery - Hydroxyapatite - Part 1: Ceramic hydroxyapatite) |
| ISO 13779-2-2000 |
外科植入物.羥磷灰石.第2部分:羥磷灰石覆層 |
(Implants for surgery - Hydroxyapatite - Part 2: Coatings of hydroxyapatite) |
| ISO 13779-4-2002 |
外科植入物.羥磷灰石.第4部分:涂層粘結強度的測定 |
(Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength) |
| ISO 13781-1997 |
外科值入物用聚L-丙交酯樹脂及其制造形狀.在實驗室條件下的降解試驗 |
(Poly(L-lactide) resins and fabricated forms for surgical implants - In vitro degradation testing) |
| ISO 13782-1996 |
外科植入物.金屬材料.外科植入物用純鉭材料 |
(Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications) |
| ISO 13783-1997 |
塑料管體系.未增塑聚氯乙烯端點負載軸承雙插座連接件.由于受彎曲和內壓條件的限制對其防漏性和強度的試驗方 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure) |
| ISO 13784-1-2002 |
夾層板建筑系統對火反應的試驗.第1部分:小室試驗方法 |
(Reaction-to-fire tests for sandwich panel building systems - Part 1: Test method for small rooms) |
| ISO 13784-2-2002 |
夾層板建筑系統對火反應的試驗.第2部分:大空間的試驗方法 |
(Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms) |
| ISO 13785-1-2002 |
正面對火反應的試驗.第1部分:中間尺度的試驗 |
(Reaction-to-fire tests for facades - Part 1: Intermediate-scale tests) |
| ISO 13785-2-2002 |
正面對火反應的試驗.第2部分:大尺度的試驗 |
(Reaction-to-fire tests for facades - Part 2: Large-scale tests) |
| ISO 13786-1999 |
建筑物件的熱性能.動態熱特性.計算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods) |
| ISO 13787-2003 |
建筑設備和裝置用隔熱產品.標稱導熱性的測定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity) |
| ISO 13787-2003 |
建筑設備和裝置用隔熱產品.標稱導熱性的測定 |
|
| ISO 13788-2001 |
建筑物組件和件的濕熱性能.避免嚴重的表面潮濕和冷凝的內表面溫度.計算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods) |
| ISO 13789-1999 |
建筑物熱性能.傳輸熱損失系數.計算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method) |
| ISO 13790-2004 |
建筑物的熱性能.空間加熱用能量計算 |
|
| ISO 13790-2004 |
建筑物的熱性能.空間加熱用能量計算 |
|
| ISO 13791-2004 |
建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.一般標準和確認程序 |
|
| ISO 13793-2001 |
建筑物的熱性能.地基防凍脹的熱設計 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave) |
| ISO 13794-1999 |
環境空氣.石棉纖維的測定.非直接轉換透射電鏡法 |
(Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method) |
| ISO 13802 Technical Corrigendum 1-2000 |
塑料.機器擺錘沖擊試驗的鑒定.卻貝、艾卓德和拉伸沖擊試驗.技術勘誤1 |
(Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1) |
| ISO 13802-1999 |
塑料.機器擺錘沖擊試驗的鑒定.卻貝、艾卓德和拉伸沖擊試驗 |
(Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing) |
| ISO 13803-2000 |
涂料和清漆.20度時漆膜光澤度反射的測定 |
(Paints and varnishes - Determination of reflection haze on paint films at 20) |
| ISO 13804-1999 |
鋁用玻璃和瓷漆.試驗樣品的生產 |
(Vitreous and porcelain enamels for aluminium - Production of specimens for testing) |
| ISO 13805-1999 |
鋁用玻璃和瓷漆.在電解溶液的作用下鋁上瓷漆粘合的測定. |
(Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)) |
| ISO 13806-1999 |
玻璃質釉和瓷釉.封閉系統的腐蝕試驗 |
(Vitreous and porcelain enamels - Corrosion tests in closed systems) |
| ISO 13807 Technical Corrigendum 1-2000 |
釉層和瓷漆層.化學工業用瓷釉在熱沖擊試驗中斷裂形成溫度的測定.技術勘誤1 |
(Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry; Technical Corrigendum 1) |
| ISO 13807-1999 |
釉瓷和搪瓷.化學工業用搪瓷的熱沖擊試驗中裂縫形成溫度的測定 |
(Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry) |
| ISO 13819-2-1995 |
石油和天然氣工業.近海結構.第2部分:固定的鋼結構 |
(Petroleum and natural gas industries - Offshore structures - Part 2: Fixed steel structures) |
| ISO 1382-2002 |
橡膠.詞匯 |
(Rubber - Vocabulary) |
| ISO 13820-1996 |
紙、紙板和波紋紙板.壓縮試驗設備的描述和校準 |
(Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment) |
| ISO 13821-2002 |
波紋紙板.耐沿邊擠壓性的測定.上蠟邊法 |
(Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method) |
| ISO 13829-2000 |
水質.用UMU試驗法測定水和廢水遺傳毒性 |
(Water quality - Determination of the genotoxicity of water and waste water using the umu-test) |
| ISO 13844-2000 |
塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接合.負壓下密封試驗 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure) |
| ISO 13845-2000 |
塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接合.內壓下角度偏轉密封試驗 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection) |
| ISO 13846-2000 |
塑料管道系統.熱塑性壓力管用端負載和無端負載支承組件和接頭.內部水壓下長期密封性的試驗方法 |
(Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure) |
| ISO 13847 Technical Corrigendum 1-2001 |
石油和天然氣工業.管道輸送系統.管道焊接.技術勘誤1 |
(Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines; Technical Corrigendum 1) |
| ISO 13847-2000 |
石油和天然氣工業.管道運輸系統.管道焊接 |
(Petroleum and natural gas industrie - Pipeline transportation systems - Welding of pipelines) |
| ISO 13849-1-1999 |
機器的安全性.控制系統與安全有關的部分.第1部分:設計的一般規則 |
(Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design) |
| ISO 13849-2-2003 |
機械安全.控制系統的安全相關部件.第2部分:驗證 |
(Safety of machinery - Safety-related parts of control systems - Part 2: Validation) |
| ISO 13849-2-2003 |
機械安全.控制系統的安全相關部件.第2部分:驗證 |
|
| ISO 1385-1-1977 |
工業用鄰苯二甲酸酯.試驗方法.第1部分:總則 |
(Phthalate esters for industrial use; Methods of test; Part I : General) |
| ISO 1385-2-1977 |
工業用鄰苯二甲酸酯.試驗方法.第2部分:熱處理后顏色的測定(鄰苯二甲酸二烯丙基除外) |
(Phathalate esters for industrial use; Methods of test; Part II : Measurement of colour after heat treatment (Diallyl phthalate excluded)) |
| ISO 1385-3-1977 |
工業用鄰苯二甲酸酯.試驗方法.第3部分:灰分的測定 |
(Phthalate esters for industrial use; Methods of test; Part III : Determination of ash) |
| ISO 1385-4-1977 |
工業用鄰苯二甲酸酯.試驗方法.第4部分:用酚酞測定酸度.滴定法 |
(Phthalate esters for industrial use; Methods of test; Part IV : Determination of acidity to phenolphthalein; Titrimetric method) |
| ISO 1385-5-1977 |
工業用鄰苯二甲酸酯.試驗方法.第5部分:酯含量的測定.皂化后滴定法 |
(Phthalate esters for industrial use; Methods of test; Part V : Determination of ester content; Titrimetric method after saponification) |
| ISO 13850-1996 |
機械的安全.緊急制動裝置的設計原理 |
(Safety of machinery - Emergency stop - Principles for design) |
| ISO 13851-2002 |
機械安全.雙手控制器.功能問題和設計原理 |
(Safety of machinery - Two-hand control devices - Functional aspects and design principles) |
| ISO 13852-1996 |
機械安全.用上限極限法阻止達到危險地區的安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs) |
| ISO 13853-1998 |
機械安全.下肢與可觸及危險區域間的安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs) |
| ISO 13854-1996 |
機械安全.人體部件避免壓碎的最小縫隙 |
(Safety of machinery - Minimum gaps to avoid crushing of parts of the human body) |
| ISO 13855-2002 |
機械安全.保護設備相對于人體部位接近速度的定位 |
(Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body) |
| ISO 13856-1-2001 |
機械安全.壓敏保護性裝置.第1部分:壓敏墊和壓敏底板的設計和試驗一般原則 |
(Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors) |
| ISO 1386-1983 |
工業用溶劑乙酸酯.試驗方法 |
(Solvent acetates for industrial use; Methods of test) |
| ISO 13860-2000 |
林業用機械.傳送器.術語、定義和商業規范 |
(Machinery for forestry - Forwarders - Terms, definitions and commercial specifications) |
| ISO 13861-2000 |
林業用機械.輪式木材搬運車.術語、定義和商業規范 |
(Machinery for forestry - Wheeled skidders - Terms, definitions and commercial specifications) |
| ISO 13862-2000 |
林業用機械.伐木歸堆聯合機.術語、定義和商業規范 |
(Machinery for forestry - Feller bunchers - Terms, definitions and commercial specifications) |
| ISO 1387-1982 |
工業用甲醇.試驗方法 |
(Methanol for industrial use; Methods of test) |
| ISO 13877-1998 |
土壤質量.多核芳香烴類的測定.高效液相色譜法 |
(Soil quality - Determination of polynuclear aromatic hydrocarbons - Method using high-performance liquid chromatography) |
| ISO 13878-1998 |
土壤質量.用干燒法測定總氮含量 |
(Soil quality - Determination of total nitrogen content by dry combustion (“elemental analysis“)) |
| ISO 13879-1999 |
石油和天然氣工業.功能規范的內容和起草 |
(Petroleum and natural gas industries - Content and drafting of a functional specification) |
| ISO 1388-1-1981 |
工業用乙醇.試驗方法.第1部分:總則 |
(Ethanol for industrial use; Methods of test; Part 1 : General) |
| ISO 1388-10-1981 |
工業用乙醇.試驗方法.第10部分:烴含量的測定.蒸餾法 |
(Ethanol for industrial use; Methods of test; Part 10 : Estimation of hydrocarbons content; Distillation method) |
| ISO 1388-11-1981 |
工業用乙醇.試驗方法.第11部分:糠醛檢驗 |
(Ethanol for industrial use; Methods of test; Part 11 : Test for detection of furfural) |
| ISO 1388-12-1981 |
工業用乙醇.試驗方法.第12部分:高錳酸鹽時間的測定 |
(Ethanol for industrial use; Methods of test; Part 12 : Determination of permanganate time) |
| ISO 1388-2-1981 |
工業用乙醇.試驗方法.第2部分:用酚酞檢驗堿度或測定酸度 |
(Ethanol for industrial use; Methods of test; Part 2 : Detection of alkalinity or determination of acidity to phenolphthalein) |
| ISO 1388-3-1981 |
工業用乙醇.試驗方法.第3部分:含有少量的羰基化合物含量的測定.滴定法 |
(Ethanol for industrial use; Methods of test; Part 3 : Estimation of content of carbonyl compounds present in small amounts; Photometric method) |
| ISO 1388-4-1981 |
工業用乙醇.試驗方法.第4部分:中等量的羰基化合物含量的測定.滴定法 |
(Ethanol for industrial use; Methods of test; Part 4 : Estimation of content of carbonyl compounds present in moderate amounts; Titrimetric method) |
| ISO 1388-5-1981 |
工業用乙醇.試驗方法.第5部分:醛類含量的測定.目測比色法 |
(Ethanol for industrial use; Methods of test; Part 5 : Determination of aldehydes content; Visual colorimetric method) |
| ISO 1388-6-1981 |
工業用乙醇.試驗方法.第6部分:與水混溶性試驗 |
(Ethanol for industrial use; Methods of test; Part 6 : Test for miscibility with water) |
| ISO 1388-7-1981 |
工業用乙醇.試驗方法.第7部分:甲醇含量(0.01-0.02%(v/v)的測甲醇含量)的測定.光度法 |
(Ethanol for industrial use; Methods of test; Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)); Photometric method) |
| ISO 1388-8-1981 |
工業用乙醇.試驗方法.第8部分:甲醇含量的測定(0.01-0.150%(v/v)的甲醇含量).目測比色法 |
(Ethanol for industrial use; Methods of test; Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)); Visual colorimetric method) |
| ISO 1388-9-1981 |
工業用乙醇.試驗方法.第9部分:酯含量的測定.皂化后滴定法 |
(Ethanol for industrial use; Methods of test; Part 9 : Determination of esters content; Titrimetric method after saponification) |
| ISO 13880-1999 |
石油和天然氣工業.技術規范的內容和起草 |
(Petroleum and natural gas industries - Content and drafting of a technical specification) |
| ISO 13884-2003 |
動物和植物脂肪和油.用紅外光譜測定法測定孤立的反式異構體 |
(Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry) |
| ISO 13884-2003 |
動物和植物脂肪和油.用紅外光譜測定法測定孤立的反式異構體 |
|
| ISO 13885-1-1998 |
涂料和清漆用膠粘劑.凝膠滲透色譜法(GPC).第1部分:用四氫呋喃作洗脫溶劑 |
(Binders for paints and varnishes - Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent) |
| ISO 13887-1995 |
有改進可成型性較高強度的冷軋薄鋼板 |
(Cold-reduced steel sheet of higher strength with improved formability) |
| ISO 13887-2004 |
增強可成型性的高屈服強度冷軋薄鋼板 |
|
| ISO 1389-1-1977 |
工業用鄰苯二甲酸酐.試驗方法.第1部分:總則 |
(Phthalic anhydride for industrial use; Methods of test; Part I : General) |
| ISO 1389-10-1977 |
工業用鄰苯二甲酸酐.試驗方法.第10部分:1,4-萘醌含量的測定.比色法 |
(Phthalic anhydride for industrial use; Methods of test; Part X : Determination of 1,4- naphthaquinone content; Colorimetric method) |
| ISO 1389-11-1977 |
工業用鄰苯二甲酸酐.試驗方法.第11部分:鐵含量的測定.2,2`-聯吡啉光度法 |
(Phthalic anhydride for industrial use; Methods of test; Part XI : Determination of iron content; 2,2`- Bipyridyl photometric method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com