標準號 |
中文名稱 |
英文名稱 |
| ISO 7501-1985 |
識別卡.計算機可讀證件 |
Identification cards; Machine readable passport |
| ISO 7503-1-1988 |
表面污染的評估.第1部分:β發射器(最大β能量大于0.15MeV)和α發射器 |
Evaluation of surface contamination; part 1: beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters |
| ISO 7503-2-1988 |
表面污染的評估.第2部分:氚的表面污染 |
Evaluation of surface contamination; part 2: tritium surface contamination |
| ISO 7503-3-1996 |
表面污染的評估.第3部分:同質異能躍遷和電子俘獲發射器、低能β發射器 |
Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters ( 0,15 MeV) |
| ISO 7504-2001 |
氣體分析.詞匯 |
Gas analysis - Vocabulary |
| ISO 7505-1986 |
林業機械.鏈鋸.人手傳遞的振動測量 |
Forestry machinery; Chain saws; Measurement of hand-transmitted vibration |
| ISO 7506-1984 |
紡織機械和附件.提花機穿綜用綜框的標準號 |
Textile machinery and accessories; Numbering of harnesses for drawing-in on Jacquard machines |
| ISO 7507-1-1993 |
石油和液態石油產品.立式圓柱形罐的校驗.第1部分:油罐的計量法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 1: strapping method |
| ISO 7507-1-2003 |
石油和液態石油產品.直立式圓筒狀油罐的標定.第1部分:圍測法 |
|
| ISO 7507-1-2003 |
石油和液態石油產品.直立式圓筒狀油罐的標定.第1部分:圍測法 |
|
| ISO 7507-2-1993 |
石油和液態石油產品.立式圓柱形罐的校驗.第2部分:光學對比線法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 2: optical reference line method |
| ISO 7507-3-1993 |
石油和液態石油產品.立式圓柱形罐的校驗.第3部分:光學三角形測量法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 3: optical-triangulation method |
| ISO 7507-4-1995 |
石油和液態石油產品.立式圓柱形罐的校驗.第4部分:內電光通達距離法 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro-optical distance-ranging method |
| ISO 7507-5-2000 |
石油和液態石油產品.立式圓柱形罐的校準.第5部分:內電光通達距離法 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 5: External electro-optical distance-ranging method |
| ISO 7508-1985 |
壓力管用未增塑聚氯乙烯閥(PVC-U).基本尺寸.米制系列 |
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure; Basic dimensions; Metric series |
| ISO 7509-2000 |
塑料管道系統.玻璃增強熱固性塑料(GRP)管道.持續內壓力下破裂時間的測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure |
| ISO 751-1998 |
水果和蔬菜制品.水不溶性固體物質含量的測定 |
Fruit and vegetable products - Determination of water-insoluble solids |
| ISO 7510-1997 |
塑料管系統.玻璃增強塑料(GRP)件.重量法測定成份 |
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method |
| ISO 7511-1999 |
塑料管道系統.玻璃纖維增強熱固塑料(GRP)管和配件.確定短期內壓下管壁密封性的檢驗方法 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| ISO 7513-1990 |
固體速溶茶.水分(在103℃時質量損失)的測定 |
Instant tea in solid form; determination of moisture content (loss in mass at 103 鳦) |
| ISO 7514-1990 |
固體速溶茶.總灰分測定 |
Instant tea in solid form; determination of total ash |
| ISO 7516-1984 |
固體狀速溶茶.取樣 |
Instant tea in solid form; Sampling |
| ISO 7518-1983 |
技術制圖.建筑制圖.拆除和重建的簡化表示法 |
Technical drawings; Construction drawings; Simplified representation of demolition and rebuilding |
| ISO 7519-1991 |
技術制圖.建筑制圖.總體布置圖和構件圖表示法的一般原理 |
Technical drawings; construction drawings; general prinicples of presentation for general arrangement and assembly drawings |
| ISO 752-1981 |
鋅錠 |
Zinc ingots |
| ISO 752-2004 |
鋅錠 |
|
| ISO 7520-1985 |
鎳鐵.鈷含量的測定.火焰原子吸收光譜測定法 |
Ferronickel; Determination of cobalt content; Flame atomic absorption spectrometric method |
| ISO 7523-1985 |
鎳.銀、砷、鉍、鎘、鉛、銻、硒、錫、 和鉈含量的測定.電熱原子吸收光譜測定法 |
Nickel; Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents; Electrothermal atomic absorption spectrometric method |
| ISO 7524-1985 |
鎳、鎳鐵和鎳合金.碳含量的測定.感應電爐燃燒后紅外線吸收法 |
Nickel, ferronickel and nickel alloys; Determination of carbon content; Infra-red absorption method after induction furnace combustion |
| ISO 7525-1985 |
鎳.硫含量的測定.生成硫化氫后亞甲藍分子吸收光譜測定法 |
Nickel; Determination of sulfur content; Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide |
| ISO 7526-1985 |
鎳、鎳鐵和鎳合金.硫含量的測定.感應電爐燃燒后紅外線吸收法 |
Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion |
| ISO 7527-1985 |
鎳、鎳鐵和鎳合金.硫含量的測定.感應電爐燃燒后碘量滴定法 |
Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion |
| ISO 7528-1989 |
鎳合金.鐵含量的測定.用重鉻酸鉀滴定法 |
Nickel alloys; determination of iron content; titrimetric method with potassium dichromate |
| ISO 7529-1989 |
鎳合金.鉻含量的測定.用硫酸鐵(II)銨電勢滴定法 |
Nickel alloys; determination of chromium content; potentiometric titration method with ammonium iron(II) sulfate |
| ISO 753-1-1981 |
工業用乙酸.試驗方法.第1部分:總則 |
Acetic acid for industrial use; Methods of test; Part 1 : General |
| ISO 753-10-1981 |
工業用乙酸.試驗方法.第10部分:重金屬(包括鐵)目測檢驗 |
Acetic acid for industrial use; Methods of test; Part 10 : Visual limit test for heavy metals (including iron) |
| ISO 753-2-1981 |
工業用乙酸.試驗方法.第2部分:乙酸含量的測定.滴定法 |
Acetic acid for industrial use; Method of test; Part 2 : Determination of acetic acid content; Titrimetric method |
| ISO 753-3-1983 |
工業用乙酸.試驗方法.第3部分:甲酸含量的測定.碘量法 |
Acetic acid for industrial use; Methods of test; Part 3 : Determination of formic acid content; Iodometric method |
| ISO 753-4-1981 |
工業用乙酸.試驗方法.第4部分:乙醛單體含量的測定.滴定法 |
Acetic acid for industrial use; Methods of test; Part 4 : Determination of acetaldehyde monomer content; Titrimetric method |
| ISO 753-5-1981 |
工業用乙酸.試驗方法.第5部分:乙醛總含量的測定.滴定法 |
Acetic acid for industrial use; Methods of test; Part 5 : Determination of total acetaldehyde content; Titrimetric method |
| ISO 753-6-1981 |
工業用乙酸.試驗方法.第6部分:高錳酸鹽指數的測定 |
Acetic acid for industrial use; Methods of test; Part 6 : Determination of permanganate index |
| ISO 753-7-1981 |
工業用乙酸.試驗方法.第7部分:重鉻酸鹽指數的測定 |
Acetic acid for industrial use; Methods of test; Part 7 : Determination of dichromate index |
| ISO 753-8-1981 |
工業用乙酸.試驗方法.第8部分:無機氯化物極限目測試驗 |
Acetic acid for industrial use; Methods of test; Part 8 : Visual limit test for inorganic chlorides |
| ISO 753-9-1981 |
工業用乙酸.試驗方法.第9部分:無機硫酸鹽目測試驗 |
Acetic acid for industrial use; Methods of test; Part 9 : Visual limit test for inorganic sulphates |
| ISO 7530-1-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第1部分:一般要求和樣品溶解 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 1: general requirements and sample dissolution |
| ISO 7530-2-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第2部分:鈷含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 2: determination of cobalt content |
| ISO 7530-3-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第3部分:鉻含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 3: determination of chromium content |
| ISO 7530-4-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第4部分:銅含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 4: determination of copper content |
| ISO 7530-5-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第5部分:鐵含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 5: determination of iron content |
| ISO 7530-6-1990 |
鎳合金.火焰原子吸收光譜測定分析法.第6部分:錳含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 6: determination of manganese content |
| ISO 7530-7-1992 |
鎳合金.火焰原子吸收光譜分析.第7部分:鋁含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 7: determination of aluminium content |
| ISO 7530-8-1992 |
鎳合金.火焰原子吸收光譜分析.第8部分:硅含量測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 8: determination of silicon content |
| ISO 7530-9-1993 |
鎳合金.火焰原子吸收光譜分析.第9部分:釩含量的測定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 9: determination of vanadium content |
| ISO 7531-1987 |
通用鋼絲繩的索具.特性和規范 |
Wire rope slings for general purposes; Characteristics and specifications |
| ISO 7535-1984 |
表面活性劑.家用器皿洗滌機用洗滌劑.性能比較試驗指南 |
Surface active agents; Detergents for domestic machine dishwashing; Guide for comparative testing of performance |
| ISO 7536-1994 |
石油產品.汽油耐氧化性測定.誘導期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method |
| ISO 7537-1997 |
石油產品.酸值的測定.半微量顯色指示劑滴定法 |
Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method |
| ISO 7539-1-1987 |
金屬和合金的腐蝕.腐蝕應力試驗.第1部分:試驗程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures |
| ISO 7539-2-1989 |
金屬和合金的腐蝕.應力腐蝕試驗.第2部分:彎曲梁試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens |
| ISO 7539-3-1989 |
金屬和合金的耐腐蝕性.應力腐蝕試驗.第3部分:U型彎曲試樣的制備和使用 |
Corrosion of metals and alloys; stress corrosion testing; part 3: preparation and use of U-bend specimens |
| ISO 7539-4-1989 |
金屬和合金的腐蝕.應力腐蝕試驗.第4部分:單向載荷拉伸試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens |
| ISO 7539-5-1989 |
金屬和合金的腐蝕.應力腐蝕試驗.第5部分:C-環形試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens |
| ISO 7539-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第6部分:恒定負荷或恒定位移條件下試驗用預破裂試樣的制備 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement |
| ISO 7539-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第6部分:恒定負荷或恒定位移條件下試驗用預破裂試樣的制備 |
|
| ISO 7539-7-1989 |
金屬和合金的腐蝕.應力腐蝕試驗.第7部分:慢速應變率試驗 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing |
| ISO 7539-8-2000 |
金屬和合金的腐蝕.應力腐蝕試驗.第8部分:焊件評定試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments |
| ISO 7539-9-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第9部分:在提升荷載或提升位移下試驗用預裂紋試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement) |
| ISO 7539-9-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第9部分:在提升荷載或提升位移下試驗用預裂紋試樣的制備和使用 |
|
| ISO 754-1982 |
工業用乙酸酐.試驗方法 |
Acetic anhydride for industrial use; Methods of test |
| ISO 7540-1984 |
辣椒粉(Capsicum annuum Linnaeus).規范 |
Ground (powdered) paprika (Capsicum annuum Linnaeus); Specification |
| ISO 7541-1989 |
辣椒粉.天然色素總含量的測定 |
Ground (powdered) parika; determination of total natural colouring matter content |
| ISO 7542-1984 |
辣椒粉(Capsicum annuum Linnaeus).顯微鏡檢驗 |
Ground (powdered) paprika (Capsicum annuum Linnaeus); Microscopical examination |
| ISO 7543-1-1994 |
辣椒和辣椒油樹脂.辣椒素總含量的測定.第1部分:光譜測定法 |
Chillies and chilli oleoresins - Determination of total capsaicinoid content - Part 1: Spectrometric method |
| ISO 7543-2-1993 |
辣椒和辣椒油樹脂.辣椒素總含量的測定.第2部分:高性能液相色譜方法 |
Chillies and chilli oleoresins; determination of total capsaicinoid content; part 2: method using high-performance liquid chromatography |
| ISO 7545-1983 |
造船和海上建筑物.內河航船.頂推式駁船的單栓自動連接器 |
Shipbuilding and marine structures; Inland navigation; Single-lock automatic couplings for push tows |
| ISO 7546-1983 |
土方機械.裝載機和前裝式挖土機鏟斗.額定容量 |
Earth-moving machinery; Loader and front loading excavator buckets; Volumetric ratings |
| ISO 7547-2002 |
船舶和海上技術.起居處所的空調和通風.設計條件和計算基礎 |
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations |
| ISO 755-1-1981 |
工業用丁一醇.試驗方法.第1部分:總則 |
Butan-1-ol for industrial use; Methods of test; Part 1 : General |
| ISO 755-2-1981 |
工業用丁一醇.試驗方法.第2部分:酸度的測定.滴定法 |
Butan-1-ol for industrial use; Methods of test; Part 2 : Determination of acidity; Titrimetric method |
| ISO 755-3-1981 |
工業用丁一醇.試驗方法.第3部分:硫酸顏色試驗 |
Butan-1-ol for industrial use; Methods of test; Part 3: Sulphuric acid colour test |
| ISO 7550-1985 |
實驗室玻璃器皿.一次性使用的微量移液管 |
Laboratory glassware; Disposable micropipettes |
| ISO 7551-1996 |
牙科吸收點 |
Dental absorbent points |
| ISO 7558-1988 |
水果及蔬菜預包裝導則 |
Guide to the prepacking of fruits and vegetables |
| ISO 756-1-1981 |
工業用丙二醇.試驗方法.第1部分:總則 |
Propan-2-ol for industrial use; Methods of test; Part 1 : General |
| ISO 756-2-1981 |
工業用丙二醇.試驗方法.第2部分:酸度的測定.滴定法 |
Propan-2-ol for industrial use; Methods of test; Part 2: Determination of acidity; Titrimetric method |
| ISO 756-3-1981 |
工業用丙二醇.試驗方法.第3部分:與水互溶性試驗 |
Propan-2-ol for industrial use; Methods of test; Part 3 : Test for miscibility with water |
| ISO 7560-1995 |
黃瓜.貯存和冷藏運輸指南 |
Cucumbers - Storage and refrigerated transport |
| ISO 7561-1984 |
栽培的蘑菇.冷藏和冷藏運輸指南 |
Cultivated mushrooms; Guide to cold storage and refrigerated transport |
| ISO 7562-1990 |
馬鈴薯.人工通風窯內貯存準則 |
Potatoes; guidelines for storage in artificially ventilated stores |
| ISO 7563-1998 |
新鮮水果和蔬菜.詞匯 |
Fresh fruits and vegetables - Vocabulary |
| ISO 7565-1993 |
縮微攝影技術.透明縮微膠片閱讀器.性能測量 |
Micrographics; readers for transparent microforms; measurement of characteristics |
| ISO 7568-1986 |
木工機械.單面刨光用有旋轉刀架的厚度刨床.專用術語和驗收條件 |
Woodworking machines; Thickness planing machines with rotary cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7569-1986 |
木工機械.兩側.三側或四側刨削用刨床.專用術語和驗收條件 |
Woodworking machines; Planing machines for two-, three- or four-side dressing; Nomenclature and acceptance conditions |
| ISO 757-1-1982 |
工業用丙酮.試驗方法.第1部分:總則 |
Acetone for industrial use; Methods of test; Part 1 : General |
| ISO 757-2-1982 |
工業用丙酮.試驗方法.第2部分:用酚酞測定酸度.滴定法 |
Acetone for industrial use; Methods of test; Part 2 : Determination of acidity to phenolphthalein; Titrimetric method |
| ISO 757-3-1982 |
工業用丙酮.試驗方法.第3部分:水混溶性試驗 |
Acetone for industrial use; Methods of test; Part 3 : Test for miscibility with water |
| ISO 757-5-1982 |
工業用丙酮.試驗方法.第5部分:用阿加爾漢試劑對照試驗 |
Acetone for industrial use; Methods of test; Part 5 : Control test with Agulhon`s reagent |
| ISO 7570-1986 |
木工機械.平刨和壓刨床.專用術語和驗收條件 |
Woodworking machines; Surface planing and thicknessing machines; Nomenclature and acceptance conditions |
| ISO 7571-1986 |
木工機械.有單面刨光刀架刨的平面刨床.專用術語和驗收條件 |
Woodworking machines; Surface planing machines with cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7572-1984 |
機床工件夾緊的固定式工作臺驗收和安裝條件 |
Conditions of acceptance and installation for work-holding fixed tables of machine tools |
| ISO 7573-1983 |
技術制圖.欄目表 |
Technical drawings; Item lists |
| ISO 7574-1-1985 |
聲學.測定和檢驗機械及設備標定噪音發生值的統計方法.第1部分:一般依據和定義 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1 : General considerations and definitions |
| ISO 7574-2-1985 |
聲學.測定和檢驗機械及設備標定噪音發生值的統計方法.第2部分:單個機械標定值法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 2 : Methods for stated values for individual machines |
| ISO 7574-3-1985 |
聲學.測定和檢驗機械及設備標定噪音發生值的統計方法.第3部分:機械群組標定值的簡易(轉換)法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3 : Simple (transition) method for stated values for batches of machines |
| ISO 7574-4-1985 |
聲學.測定和檢驗機械及設備標定噪音發生值的統計方法.第4部分:機械群組標定值法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines |
| ISO 7575-1993 |
商業用道路車輛.扁平配件輪固定螺母 |
Commercial road vehicles; flat attachment wheel fixing nuts |
| ISO 7576-1990 |
道路車輛.壓燃式發動機的兩級燃油濾清器頂蓋.裝配和連接尺寸 |
Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions |
| ISO 7578-2001 |
道路車輛.罩型熱線點火塞.一般要求和試驗方法 |
Road vehicles - Sheath-type glow-plugs - General requirements and test methods |
| ISO 7579-1990 |
染料.有機溶劑溶解度的測定.重量法電影攝影.在打過8mmS型影像區域.位置和尺寸 |
Dyestuffs; determination of solubility in organic solvents; gravimetric method |
| ISO 758-1976 |
工業用液態化學制品.在20℃時的濃度測定 |
Liquid chemical products for industrial use; Determination of density at 20 degrees C |
| ISO 7580-1987 |
識別卡.原始電報卡.金融交易量 |
Identification cards; Card originated messages; Content for financial transactions |
| ISO 7583-1986 |
鋁及其合金的陽極氧化.詞匯 |
Anodizing of aluminium and its alloys; Vocabulary Trilingual edition |
| ISO 7586-1985 |
黃油.水分?jǐn)U散值的測定 |
Butter; Determination of water dispersion value |
| ISO 7587-1986 |
錫鉛合金電鍍層.規范和試驗方法 |
Electroplated coatings of tin-lead alloys; Specification and test methods |
| ISO 7588-1-1998 |
道路車輛.電/電子開關設備.第1部分:繼電器和閃光器 |
Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers |
| ISO 7588-2-1998 |
道路車輛.電/電子開關設備.第2部分:電子設備 |
Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices |
| ISO 7588-3-1998 |
道路車輛.電/電子開關設備.第3部分:微繼電器 |
Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays |
| ISO 7589-2002 |
氣體分析.用動態容積法標定氣體混合物.第10部分:滲透法 |
Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| ISO 759-1981 |
工業用揮發性有機液體.在水槽中蒸發后干涸殘余物的測定.一般方法 |
Volatile organic liquids for industrial use; Determination of dry residue after evaporation on water bath; General method |
| ISO 7590-2001 |
鋼絲輸送帶.總厚度和覆層厚度的測量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com