標準號 |
中文名稱 |
英文名稱 |
| ISO 1014-1985 |
焦炭.真相對密度、表觀相對密度和孔隙率的測定 |
(Coke; Determination of true relative density, apparent relative density and porosity) |
| ISO 10142-1996 |
鋁制品中用的含碳材料.煅燒的焦炭.用實驗室振動式磨礦機測定粒度穩定性 |
(Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill) |
| ISO 10143-1995 |
鋁生產用含碳材料.電極用煅燒過的焦炭.小顆粒電阻率的測定 |
(Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules) |
| ISO 10144-1991 |
混凝土結構增強用鋼棒材和線材的認證方案 |
(Certification scheme for steel bars and wires for the reinforcement of concrete structures) |
| ISO 10145-1-1993 |
有銅焊螺旋硬質合金刀頭的端面銑刀.第1部分:直柄端面銑刀尺寸 |
(End mills with brazed helical hardmetal tips; part 1: dimensions of end mills with parallel shank) |
| ISO 10145-2-1993 |
有銅焊螺旋硬質合金刀頭的端面銑刀.第2部分:7/24英寸錐柄端面銑刀的尺寸 |
(End mills with brazed helical hardmetal tips; part 2: dimensions of end mills with 7/24 taper shank) |
| ISO 10146-1997 |
交聯聚乙烯(PE-X)管.時間和溫度對預期強度的影響 |
(Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength) |
| ISO 10147-1994 |
交聯聚乙烯制管和管配件.使用凝膠含量測定法對交聯度的評定 |
(Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content) |
| ISO 10147-2004 |
交聯聚乙烯(PE-X)管材和管件.通過測定凝膠含量估算交聯度 |
|
| ISO 10147-2004 |
交聯聚乙烯(PE-X)管材和管件.通過測定凝膠含量估算交聯度 |
|
| ISO 10153-1997 |
鋼.硼含量的測定.姜黃素分光光度法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method) |
| ISO 10154-1991 |
薄金屬容器.三件向內卷曲頸氣溶劑罐.頂端尺寸 |
(Light gauge metal containers; three-piece necked-in tinplate aerosol cans; dimensions of the top end) |
| ISO 10155 Technical Corrigendum 1-2002 |
固定源輻射.自動監測粒子的質量濃度.性能特性、實驗方法和規范、技術勘誤1 |
(Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications; Technical Corrigendum 1) |
| ISO 10155-1995 |
固定輻射源.顆粒的質量濃度的自動監控.功能特性、試驗方法和規范 |
(Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications) |
| ISO 10156-1996 |
氣體和氣體混合物.氣瓶閥口選擇用潛在燃燒性和氧化能力的測定 |
(Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets) |
| ISO 10157-1991 |
攝影技術.閃光燈曝光表.要求 |
(Photography; flash exposure meter; requirements) |
| ISO 10160 AMD 1-2002 |
信息和文獻.開放系統互聯.館際互借應用服務定義.修改1:附錄中加D表示承認加拿大國家圖書館為維護機構 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition; Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency) |
| ISO 10160-1997 |
情報和文獻.開放系統互連.館際互借應用服務定義 |
(Information and documentation - Open Systems Interconnection - Interlibrary loan application service definition) |
| ISO 10161-1 AMD 1-2002 |
信息和文獻.開放系統互聯.館際互借應用協議規范.第1部分:協議規范.修改1:擴充數據的“識別符“參數中目標識 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol specification; Amendment 1: Support for Use of Object Identifier in “identifier“ Parameter of the Extension Data) |
| ISO 10161-1 AMD 2-2002 |
信息和文獻工作.開放系統互連.館際互借應用協議規范.第1部分:協議規范.修改件2:附錄中加I表示承認加拿大國 |
(Information and documentation - Open Systems Interconnection - Interlibrary loan application protocol specification - Part 1: Protocol specification; Amendment 2: Addition of annex I acknowledging the National Library of Canada as the Maintenance Agency |
| ISO 10161-1-1997 |
信息和文獻.開放系統互連,館際借用協議規范.第1部分:協議規范 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol specification) |
| ISO 10161-2-1997 |
信息和文獻.開放系統互連.館際借用協議規范.第2部分:協議履行一致性聲明(PICS)形式 |
(Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2: Protocol Implementation Conformance Statement (PICS) proforma) |
| ISO 10162-1993 |
情報和文獻.開放系統互連.檢索和覓數應用服務定義 |
(Information and documentation; Open Systems Interconnection; search and retrieve application service definition) |
| ISO 10163-1-1993 |
情報和文獻.開放系統互連.檢索應用協議規范.第1部分:協議規范 |
(Information and documentation; Open Systems Interconnection; Search and retrieve application protocol specification; Part 1: Protocol specification) |
| ISO 1017-1985 |
褐煤.可溶甲苯萃取物中丙酮可溶物(“樹脂狀物質“)的測定 |
(Brown coals and lignites; Determination of acetone-soluble material (“resinous substances“) in the toluene-soluble extract) |
| ISO 1018-1975 |
硬煤.含水能力的測定 |
(Hard coal; Determination of moisture-holding capacity) |
| ISO 10185-1993 |
煙草和煙草制品.詞匯 |
(Tobacco and tobacco products; vocabulary) |
| ISO 10185-2004 |
煙草和煙草制品.詞匯 |
|
| ISO 1019-1982 |
電影技術.16mm電影攝影機白天裝片用防光片盒.尺寸 |
(Cinematography; Spools, daylight loading type for 16 mm motion-picture cameras; Dimensions) |
| ISO 10190-1992 |
摩托車鏈條.特性和試驗方法 |
(Motor cycle chains; characteristics and test methods) |
| ISO 10191 AMD 1-1998 |
客車輪胎.校驗輪胎性能.實驗室試驗法.修改件1 |
(Passenger car tyres - Verifying tyre capabilities - Laboratory test methods; Amendment 1) |
| ISO 10191-1995 |
客車輪胎.校驗輪胎性能.實驗室試驗法 |
(Passenger car tyres - Verifying tyre capabilities - Laboratory test methods) |
| ISO 10193-2000 |
通用輕型金屬量器.低于4000ml的圓柱形和錐形容器的標稱裝填量 |
(General use light gauge metal containers - Nominal filling volumes of round cylindrical and tapered containers of up to 40000 ml) |
| ISO 10196-2003 |
文獻成像應用.原始文獻創作推薦規程 |
(Document imaging applications - Recommendations for the creation of original documents) |
| ISO 10196-2003 |
文獻成像應用.原始文獻創作推薦規程 |
|
| ISO 10197-1993 |
顯微照相.透明縮微品用閱讀印相機的特性 |
(Micrographics -- Reader-printers for transparent microforms -- Characteristics) |
| ISO 10198-1994 |
縮微攝影技術.用16 mm 縮微膠片的旋轉式照相機的機械性能和光學性能 |
(Micrographics; rotary camera for 16 mm microfilm; mechanical and optical characteristics) |
| ISO 102-1990 |
飛機.重力加油口 |
(Aircraft; gravity filling orifices) |
| ISO 1020-1974 |
電影技術.雙8mm電影攝影機白天裝片用防光片盒.尺寸 |
(Cinematography; Spools, daylight loading type for double-8 mm motion-picture cameras; Dimensions) |
| ISO 10202-1 Technical Corrigendum 1-1999 |
財務交易卡.集成電路卡財務交易系統的證券結構.第1部分:卡片壽命周期.技術勘誤1 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 1: Card life cycle; Technical Corrigendum 1) |
| ISO 10202-1-1991 |
財務交易卡.集成電路卡財務交易系統的證券結構.第1部分:卡片壽命周期 |
(Financial transaction cards; security architecture of financial transaction systems using integrated circuit cards; part 1: card life cycle) |
| ISO 10202-2-1996 |
財務交易卡.集成電路卡財務交易系統的證券結構.第2部分:財務交易程序 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 2: Transaction process) |
| ISO 10202-3-1998 |
金融交易卡.采用集成電路卡的金融交易系統的安全結構.第3部分:加密密鑰關系 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 3: Cryptographic key relationships) |
| ISO 10202-4 Technical Corrigendum 1-1999 |
財務交易卡.集成電路卡財務交易系統的證券結構.第4部分:安全應用模塊.技術勘誤1 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 4: Secure application modules; Technical Corrigendum 1) |
| ISO 10202-4-1996 |
財務交易卡.集成電路卡財務交易系統的證券結構.第4部分:安全應用模塊 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 4: Secure application modules) |
| ISO 10202-5-1998 |
財務交易卡.集成電路卡財務交易系統的證券結構.第5部分:算法的使用 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 5: Use of algorithms) |
| ISO 10202-6-1994 |
財務交易卡.集成電路卡財務交易系統的證券結構.第6部分:卡片盒的校驗 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 6: Cardholder verification) |
| ISO 10202-7-1998 |
財務交易卡.集成電路卡財務交易系統的證券結構.第7部分:鍵管理 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 7: Key management) |
| ISO 10202-8-1998 |
財務交易卡.集成電路卡財務交易系統的證券結構.第8部分:通則和總論 |
(Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 8: General principles and overview) |
| ISO 10203-1992 |
鐵礦石.鈣含量測定.火焰原子吸收光譜法 |
(Iron ores; determination of calcium content; flame atomic absorption spectrometric method) |
| ISO 10204-1992 |
鐵礦石.鎂含量測定.火焰原子吸收光譜法 |
(Iron ores; determination of magnesium content; flame atomic absorption spectrometric method) |
| ISO 10207 Technical Corrigendum 1-1991 |
鑿巖設備.沖擊鉆用額定尺寸為22mm至38mm的穿鋼繩鋼釬設備.技術勘誤1 |
(Rock drilling equipment; rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm; technical corrigendum 1) |
| ISO 10207-1991 |
鑿巖設備.沖擊鉆井用額定尺寸為22mm至38mm的圓螺紋鋼釬設備 |
(Rock drilling equipment; rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm) |
| ISO 10208-1991 |
鑿巖設備.左旋圓螺紋 |
(Rock drilling equipment; left-hand rope threads) |
| ISO 10209-1-1992 |
技術產品文獻.詞匯.第1部分:與技術制圖相關的術語.總則和制圖種類 |
(Technical product documentation; vocabulary; part 1: terms relating to technical drawings; general and types of drawings) |
| ISO 10209-2-1993 |
技術產品文獻加工.詞匯.第2部分:有關投射方法的術語 |
(Technical product documentation; vocabulary; part 2: terms relating to projection methods) |
| ISO 10209-4-1999 |
技術產品文獻加工.詞匯.第4部分:與建筑文獻有關的條款 |
(Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation) |
| ISO 1021-1980 |
飛機.發動機艙滅火器孔和門 |
(Aircraft; Engine nacelle fire extinguisher apertures and doors) |
| ISO 10211-1-1995 |
高層建筑中的熱橋.熱流和表面溫度.第1部分:一般計算方法 |
(Thermal bridges in building construction - Heat flow and surface temperatures - Part 1: General calculation methods) |
| ISO 10211-2-2001 |
房屋建筑中的熱橋.熱流量和表面溫度的計算.第2部分:線性熱橋 |
(Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges) |
| ISO 10213-1991 |
鋁礦石.總鐵含量的測定.三氯化鈦還原法 |
(Aluminium ores; determination of total iron content; titanium trichloride reduction method) |
| ISO 10215-1992 |
陽極化鋁和鋁合金.陽極氧化層圖象明晰度的目視測定.圖表比例尺法 |
(Anodized aluminium and aluminium alloys; visual determination of image clarity of anodic oxidation coatings; chart scale method) |
| ISO 10216-1992 |
陽極化鋁和鋁合金.陽極氧化層圖象明晰度的儀器測定.儀器法 |
(Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method) |
| ISO 10218-1992 |
操縱工業機器人.安全 |
(Manipulating industrial robots; safety) |
| ISO 1022-1988 |
航空航天.飛機氣態氧充氣管接頭 |
(Aerospace; gaseous oxygen replenishment connection for use in fluid systems (old type); dimensions (inch series)) |
| ISO 10223-1992 |
紡織機械.平經編織機.導向桿標準號 |
(Textile machinery; flat warp knitting machines; numbering of guide bars) |
| ISO 10226-1991 |
鋁礦石.取樣偏差的實驗檢查方法 |
(Aluminium ores; experimental methods for checking the bias of sampling) |
| ISO 10227-1996 |
人/人的代用品沖擊(單向沖擊)試驗和評價.技術現狀導則 |
(Human/human surrogate impact (single shock) testing and evaluation - Guidance on technical aspects) |
| ISO 10228-1991 |
越野雪橇.捆綁接合面.試驗螺釘?shù)囊?/td>
| (Cross-country skis; binding mounting area; requirements for test screws) |
| ISO 10229-1994 |
水質.長期有毒物質對淡水魚毒害程度的測定.有毒物質對硬頭鱒魚生長率影響的評定方法 |
(Water quality - Determination of the prolonged toxicity of substances to freshwater fish - Method of evaluating the effects of substances on the growth rate of rainbow trout (Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae))) |
| ISO 1023-1974 |
飛機.高壓空氣充氣閥 |
(Aircraft; High pressure air charging valves) |
| ISO 10230-1990 |
自行車.花鍵套和鏈輪.配合尺寸 |
(Cycles; splined hub and sprocket; mating dimensions) |
| ISO 10231 AMD 1-1999 |
摩托車輪胎.驗證輪胎容量的試驗方法.修改件1 |
(Motorcycle tyres - Test methods for verifying tyre capabilities; Amendment 1) |
| ISO 10231-2003 |
摩托車輪胎.驗證輪胎性能的試驗方法 |
(Motorcycle tyres - Test methods for verifying tyre capabilities) |
| ISO 10231-2003 |
摩托車輪胎.驗證輪胎性能的試驗方法 |
|
| ISO 10236-1995 |
鋁生產用含碳材料.電極用未煅燒過的焦炭和煅燒過的焦炭.散裝密度的測定 |
(Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)) |
| ISO 10237-1997 |
鋁生產中使用的碳素物.煅燒焦炭.殘余氫含量的測定 |
(Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content) |
| ISO 10238-1999 |
生產鋁使用的碳素物.電極用硬瀝青.儀器化方法測定硫含量 |
(Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method) |
| ISO 10239 Technical Corrigendum 1-2001 |
小艇.液化石油氣系統;技術勘誤1 |
(Small craft - Liquefied petroleum gas (LPG) systems; Technical corrigendum 1) |
| ISO 10239-2000 |
小型船舶.液化石油氣系統 |
(Small craft - Liquefied petroleum gas (LPG) systems) |
| ISO 10240-1995 |
小型船舶.船長手冊 |
(Small craft - Owner`s manual) |
| ISO 10240-2004 |
小型船舶.船主手冊 |
|
| ISO 10241-1992 |
國際術語標準.制定和規劃 |
(International terminology standards; preparation and layout) |
| ISO 10242-1-1998 |
壓制用工具.凸模夾持器柄.第1部分:A型 |
(Tools for pressing - Punch holder shanks - Part 1: Type A) |
| ISO 10242-2-1991 |
壓制用工具.凸模柄.第2部分:C型 |
(Tools for pressing; punch holder shanks; part 2: type C) |
| ISO 10242-3-1991 |
壓制用工具.凸模柄.第3部分:D型 |
(Tools for pressing; punch holder shanks; part 3: type D) |
| ISO 10243-1991 |
壓制用工具.矩形截面壓力彈簧.骨架尺寸和色彩編碼 |
(Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding) |
| ISO 10245-1-1994 |
起重機.限定和指示裝置.第1部分:總則 |
(Cranes - Limiting and indicating devices - Part 1: General) |
| ISO 10245-2-1994 |
起重機.限定和指示裝置.第2部分:汽車起重機 |
(Cranes - Limiting and indicating devices - Part 2: Mobile cranes) |
| ISO 10245-3-1999 |
起重機.限定和指示裝置.第3部分:塔式起重機 |
(Cranes - Limiting and indicating devices - Part 3: Tower cranes) |
| ISO 10245-4-2004 |
起重機.限制器和指示器.第4部分:動臂起重機 |
|
| ISO 10245-4-2004 |
起重機.限制器和指示器.第4部分:動臂起重機 |
|
| ISO 10245-5-1995 |
起重機.限定和指示裝置.第5部分:架空移動起重機及便攜橋式起重機 |
(Cranes - Limiting and indicating devices - Part 5: Overhead travelling and portal bridge cranes) |
| ISO 10247-1990 |
輸送帶.面層的特性.分類 |
(Conveyor belts; characteristics of covers; classification) |
| ISO 10248-1996 |
液體肥料.用液膜除霧法中止試樣的脫水 |
(Fluid fertilizers - De-aeration of suspension samples by film disentrainment) |
| ISO 10249-1996 |
液體肥料.初步的視覺檢驗和物理試驗用試樣制備 |
(Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing) |
| ISO 10251-1997 |
銅,鉛和硫化鋅濃縮物.散裝材料干燥過程中質量損失的測定 |
(Copper, lead and zinc sulfide concentrates - Determination of mass loss of bulk material on drying) |
| ISO 10253-1995 |
水質.用有中脈的骨條藻屬和有三突的褐指藻屬進行的海底藻類生長限制試驗 |
(Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum) |
| ISO 10254-1995 |
空運貨物和地面設備的詞匯 |
(Air cargo and ground equipment - Vocabulary) |
| ISO 10256-2003 |
冰球運動員用頭和臉的保護裝置 |
(Head and face protection for use in ice hockey) |
| ISO 10256-2003 |
冰球運動員用頭和臉的保護裝置 |
|
| ISO 10256-2003 |
冰球運動員用頭和臉的保護裝置 |
|
| ISO 10257-1996 |
冰球運動員用的防護面具和舌帽 |
(Face protectors and visors for ice hockey players) |
| ISO 10258-1994 |
硫化銅濃縮物.銅含量測定.滴定法 |
(Copper sulfide concentrates - Determination of copper content - Titrimetric methods) |
| ISO 1026-1982 |
水果和蔬菜制品.用減壓干燥法測定干物質含量和用共沸蒸餾法測定水含量 |
(Fruit and vegetable products; Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation) |
| ISO 10260-1992 |
水質.生物化學參數測量.a-葉綠素濃縮光譜測定 |
(Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration) |
| ISO 10261-2002 |
土方機械.產品識別標準號方式系統 |
(Earth-moving machinery - Product identification numbering system) |
| ISO 10262-1998 |
土方機械.液壓挖掘機.駕駛員防護裝置的實驗室試驗和性能要求 |
(Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards) |
| ISO 10263-1-1994 |
土方機械操作者的工作環境.第1部分:總則和定義 |
(Earth-moving machinery - Operator enclosure environment - Part 1: General and definitions) |
| ISO 10263-2-1994 |
土方機械操作者的工作環境.第2部分:空氣過濾器的檢驗 |
(Earth-moving machinery - Operator enclosure environment - Part 2: Air filter test) |
| ISO 10263-3-1994 |
土方機械操作者的工作環境.第3部分:操作者密封駕駛室的加壓檢驗法 |
(Earth-moving machinery - Operator enclosure environment - Part 3: Operator enclosure pressurization test method) |
| ISO 10263-4-1994 |
土方機械操作者的工作環境.第4部分:操作者密封駕駛室的通風,加熱和/或空調檢驗法 |
(Earth-moving machinery - Operator enclosure environment - Part 4: Operator enclosure ventilation, heating and/or air-conditioning test method) |
| ISO 10263-5-1994 |
土方機械操作者的工作環境.第5部分:操作者密封駕駛室的擋風玻璃的除霜系統的檢驗法 |
(Earth-moving machinery - Operator enclosure environment - Part 5: Windscreen defrosting system test method) |
| ISO 10263-6-1994 |
土方機械操作者的工作環境.第6部分:操作者密封駕駛室受太陽光照射效力的測定 |
(Earth-moving machinery - Operator enclosure environment - Part 6: Determination of effect of solar heating on operator enclosure) |
| ISO 10264-1990 |
土方機械.鑰匙鎖閉起動裝置 |
(Earth-moving machinery; key-locked starting systems) |
| ISO 10265-1998 |
土方機械.履帶式機械.制動系統的性能要求和試驗方法 |
(Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems) |
| ISO 10266-1992 |
土方機械.機器內流體裝置工作傾斜度極限的測定.靜態試驗 |
(Earth-moving machinery; determination of slope limits for machine fluid systems operation; static test method) |
| ISO 10268-1993 |
土方機械.翻斗車和拖拉式平地機的減速器.性能試驗 |
(Earth-moving machinery; retarders for dumpers and tractor-scrapers; performance tests) |
| ISO 1027-1983 |
無損檢驗用射線照相圖象質量指示器.原理和鑒定 |
(Radiographic image quality indicators for non-destructive testing; Principles and identification) |
| ISO 10270 Technical Corrigendum 1-1997 |
金屬和合金的腐蝕.核動力反應堆用鋯合金的水腐蝕試驗.技術勘誤1 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors; Technical corrigendum 1) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com