標準號 |
中文名稱 |
英文名稱 |
| ISO 2772-2-1974 |
箱型立式鉆床的驗收條件.精度試驗.第2部分:實用試驗 |
(Test conditions for box type vertical drilling machines; Testing of the accuracy; Part II : Practical test) |
| ISO 2773-1-1973 |
柱型立式鉆床的檢驗條件.精度試驗.第1部分:幾何參數試驗 |
(Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part I : Geometrical tests) |
| ISO 2773-2-1973 |
柱型立式鉆床的檢驗條件.精度試驗.第2部分:實用試驗 |
(Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part II : Practical test) |
| ISO 2775-1977 |
用于信息處理的辦公用計算機和打印機.一次性用帶或塑料的打印色帶寬度及指示色帶終端的標志 |
(Office machines and printing machines used for information processing; Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons) |
| ISO 2776-1974 |
模數協調.門組裝裝置的協調尺寸.外屋門裝置和內屋門裝置 |
(Modular co-ordination; Co-ordinating sizes for doorsets; External and internal) |
| ISO 2777-1974 |
模數協調.用于建筑物中的剛性平面板材的協調尺寸 |
(Modular co-ordination; Co-ordinating sizes for rigid flat sheet boards used in building) |
| ISO 2780-1986 |
榫傳動銑刀.銑刀桿的互換性尺寸.米制系列 |
(Milling cutters with tenon drive; Interchangeability dimensions with cutter arbors; Metric series) |
| ISO 2781 Technical Corrigendum 1-1996 |
硫化橡膠.密度的測定.技術勘誤表1 |
(Rubber, vulcanized - Determination of density; Technical Corrigendum 1) |
| ISO 2781-1988 |
硫化橡膠.密度的測定 |
(Rubber, vulcanized; determination of density) |
| ISO 2782-1995 |
硫化橡膠或熱塑性.氣體滲透性的測定 |
(Rubber, vulcanized or thermoplastic - Determination of permeability to gases) |
| ISO 2784-1974 |
用于信息處理的連續形式.尺寸和輸送孔 |
(Continuous forms used for information processing; Sizes and sprocket feed holes) |
| ISO 2785-1986 |
有內壓或無內壓,而有外部負荷的石棉水泥管選擇指導 |
(Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure) |
| ISO 2787-1984 |
旋轉沖擊式風動工具.性能試驗 |
(Rotary and percussive pneumatic tools; performance tests) |
| ISO 2788-1986 |
文獻工作.單語種主題詞表編制導則 |
(Documentation; Guidelines for the establishment and development of monolingual thesauri) |
| ISO 2789-2003 |
情報和文獻.國際圖書館統計學 |
(Information and documentation - International library statistics) |
| ISO 2789-2003 |
情報和文獻.國際圖書館統計學 |
|
| ISO 279-1998 |
香精油.在20℃時相對比重的測定(參照法) |
(Essential oils - Determination of relative density at 20 鳦 - Reference method) |
| ISO 2790-1989 |
皮帶傳動.汽車工業用窄V型皮帶和皮帶輪.尺寸 |
(Belt drives; narrow V-belts for the automotive industry and corresponding pulleys; dimensions) |
| ISO 2790-2004 |
帶傳動.汽車工業用V帶及帶輪.尺寸 |
|
| ISO 2790-2004 |
帶傳動.汽車工業用V帶及帶輪.尺寸 |
|
| ISO 2795-1991 |
滑動軸承.燒結的軸瓦.尺寸和公差 |
(Plain bearings; sintered bushes; dimensions and tolerances) |
| ISO 2796-1986 |
硬質泡沫塑料.尺寸穩定性試驗 |
(Cellular plastics, rigid; Test for dimensional stability) |
| ISO 2797-1986 |
紡織玻璃纖維.粗紗.規范的基礎 |
(Textile glass; Rovings; Basis for a specification) |
| ISO 28-1976 |
電影技術.8mmR型電影膠片電影攝影機的用法.規范 |
(Cinematography; Camera usage of 8 mm Type R motion-picture film; Specifications) |
| ISO 280-1998 |
香精油.折光率的測定 |
(Essential oils - Determination of refractive index) |
| ISO 2800-1973 |
攝影技術.一次使用的照相閃光燈泡.定義和閃光效率的評定 |
(Photography; Expendable photoflash lamps; Definition and evaluation of flashability) |
| ISO 2801-1998 |
防熱和防火服.防護服的選擇、保存和使用的一般推薦規程 |
(Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing) |
| ISO 2804-1996 |
線,棒或管材拉模用硬質合金燒結片.尺寸 |
(Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions) |
| ISO 2806-1994 |
工業自動化系統.數控機床詞匯 |
(Industrial automation systems - Numerical control of machines - Vocabulary) |
| ISO 2808-1997 |
涂料和清漆.漆膜厚度的測定 |
(Paints and varnishes - Determination of film thickness) |
| ISO 281 AMD 1-2000 |
滾動軸承.動力荷載額定值和額定壽命.修改件1 |
(Rolling bearings - Dynamic load ratings and rating life; Amendment 1) |
| ISO 281 AMD 2-2000 |
滾動軸承.動力荷載額定值和額定壽命.修改件2:壽命改進因子A(上標xyz) |
(Rolling bearings - Dynamic load ratings and rating life; Amendment 2: Life modification factor a) |
| ISO 281-1990 |
滾動軸承.動力荷載值和額定壽命 |
(Rolling bearings; dynamic load ratings and rating life) |
| ISO 2810-1974 |
色漆和清漆.自然老化試驗指導解釋 |
(Paints and varnishes; Notes for guidance on the conduct of natural weathering tests) |
| ISO 2810-2004 |
色漆與清漆.涂層的自然風化.暴露和評定 |
|
| ISO 2811-1-1997 |
涂料和清漆.密度的測定.第1部分:比重瓶法 |
(Paints and varnishes - Determination of density - Part 1: Pyknometer method) |
| ISO 2811-2-1997 |
涂料和清漆.密度的測定.第2部分:潛體法 |
(Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method) |
| ISO 2811-3-1997 |
涂料和清漆.密度的測定.第2部分:潛體法 |
(Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method) |
| ISO 2811-4-1997 |
涂料和清漆.密度的測定.第4部分:壓力杯法 |
(Paints and varnishes - Determination of density - Part 4: Pressure cup method) |
| ISO 2812-1-1993 |
色漆和清漆.耐液體性測定.第1部分:總方法 |
(Paints and varnishes; determination of resistance to liquids; part 1: general methods) |
| ISO 2812-2-1993 |
色漆和清漆.耐液體性測定.第2部分:浸液法 |
(Paints and varnishes; determination of resistance to liquids; part 2: water immersion method) |
| ISO 2813 Technical Corrigendum 1-1997 |
色漆和清漆.非金屬漆膜鏡面在20℃,60℃和85℃時光澤的測定.技術勘誤表1 |
(Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20, 60 und 85; Technical Corrigendum 1) |
| ISO 2813-1994 |
涂料和清漆.非金屬漆膜鏡面在20℃、60℃和85℃時光澤的測定 |
(Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees und 85 degrees) |
| ISO 2814-1973 |
色漆和清漆.同一類型和顏色的色漆比色對比率(遮蓋力) |
(Paints and varnishes; Comparison of contrast ratio (hiding power) of paints of the same type and colour) |
| ISO 2815-2003 |
色漆和清漆.布考耳茲(Buchholz)壓痕試驗 |
(Paints and varnishes - Buchholz indentation test) |
| ISO 2815-2003 |
色漆和清漆.布考耳茲(Buchholz)壓痕試驗 |
|
| ISO 2816-1973 |
統一鞋號制的基本特性 |
(Fundamental characteristics of a system of shoe sizing to be known as Mondopoint) |
| ISO 2817-1999 |
煙草和煙草制品.溶于鹽酸的硅含量的測定 |
(Tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid) |
| ISO 2818-1994 |
塑料.試樣的機加工制備 |
(Plastics - Preparation of test specimens by machining) |
| ISO 2819-1980 |
金屬基質上的金屬鍍層.電鍍層和化學沉積層.試驗附著力的方法述評 |
(Metallic coatings on metallic substrates; Electrodeposited and chemically deposited coatings; Review of methods available for testing adhesion) |
| ISO 282-1992 |
輸送帶.取樣 |
(Conveyor belts; sampling) |
| ISO 2820 AMD 1-1996 |
皮革.生牛皮和生馬皮的修整方法.修改件1 |
(Leather - Raw hides of cattle and horses - Method of trim; Amendment 1) |
| ISO 2820-1974 |
皮革.生牛皮和生馬皮的修整方法 |
(Leather; Raw hides of cattle and horses; Method of trim) |
| ISO 2821 AMD 1-1996 |
皮革.生牛皮和生馬皮的鹽腌防腐.修改件1 |
(Leather - Raw hides of cattle and horses - Preservation by stack salting; Amendment 1) |
| ISO 2821-1974 |
皮革.生牛皮和生馬皮的鹽腌防腐 |
(Leather; Raw hides of cattle and horses; Preservation by stack salting) |
| ISO 2822-1-1998 |
生牛皮和小牛皮.第1部分:缺陷的描述 |
(Raw cattle hides and calf skins - Part 1: Descriptions of defects) |
| ISO 2825-1981 |
香料和調味品.分析用粉狀樣品的制備 |
(Spices and condiments; Preparation of a ground sample for analysis) |
| ISO 2826-1974 |
杏.冷藏指南 |
(Apricots; Guide to cold storage) |
| ISO 2827-1988 |
攝影.電子閃光裝置的光輸出量和性能的測定 |
(Photography; electronic flash equipment; determination of light output and performance) |
| ISO 2828-1973 |
金屬鋁生產用氧化鋁.氟含量的測定.茜素配位酮和氯化鑭分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of fluorine content; Alizarin complexone and lanthanum chloride spectrophotometric method) |
| ISO 2829-1973 |
金屬鋁生產用氧化鋁.磷含量的測定.還原磷鉬酸鹽分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method) |
| ISO 283-1-2000 |
織物傳送帶.全厚度拉伸試驗.第1部分:斷裂伸長和參考負荷伸長時拉伸強度的測定 |
(Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load) |
| ISO 283-1990 |
輸送帶.全厚度抗拉強度和伸長.規范和試驗方法 |
(Conveyor belts; full thickness tensile strength and elongation; specifications and method of test) |
| ISO 2830-1973 |
天然和人造冰晶石.鋁含量的測定.原子吸收光度法 |
(Cryolite, natural and artificial; Determination of aluminium content; Atomic absorption method) |
| ISO 2831-1973 |
工業用氟化鈉.不溶于水的物質含量的測定 |
(Sodium fluoride for industrial use; Determination of water-insoluble matter) |
| ISO 2832-1973 |
工業用氟化鈉.水含量的測定 |
(Sodium fluoride for industrial use; Determination of moisture content) |
| ISO 2833-1973 |
工業用氟化鈉.氟含量的測定.威拉德-溫特爾(Willard-Winter)改進法 |
(Sodium fluoride for industrial use; Determination of fluorine content; Modified Willard-Winter method) |
| ISO 2834 Technical Corrigendum 1-2003 |
印刷技術.用于膠印和凸印油墨測試印樣的制備.技術勘誤1 |
(Graphic technology - Test print preparation for offset and letterpress inks; Technical Corrigendum 1) |
| ISO 2834 Technical Corrigendum 1-2003 |
印刷技術.用于膠印和凸印油墨測試印樣的制備.技術勘誤1 |
|
| ISO 2834-1999 |
印刷技術.膠印壓印墨水的試驗印刷準備 |
(Graphic technology - Test print preparation for offset and letterpress inks) |
| ISO 2835-1974 |
印刷品和油墨.耐光性的評定法 |
(Prints and printing inks; Assessment of light fastness) |
| ISO 2836-1999 |
印刷技術.印刷品和油墨.對各種藥劑耐性的評價 |
(Graphic technology - Prints and printing inks - Assessment of resistance to various agents) |
| ISO 2836-2004 |
印刷技術.印刷品和印刷油墨.印刷品耐各種試劑性的評定 |
|
| ISO 2837-1996 |
圖象技術.印刷品和油墨.耐溶劑性的評定法 |
(Graphic technology - Prints and printing inks - Assessment of resistance to solvents) |
| ISO 284-2003 |
輸送帶.導電率.規范和試驗方法 |
(Conveyor belts - Electrical conductivity - Specification and test method) |
| ISO 284-2003 |
輸送帶.導電率.規范和試驗方法 |
|
| ISO 2846-1-1997 |
印刷技術.四色印刷油墨的色彩和透明度.第1部分:紙張輸進和熱量系統卷筒分支平板印刷 |
(Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 1: Sheet-fed and heat-set web offset lithographic printing) |
| ISO 2846-2-2000 |
印刷技術.四色印刷油墨的顏色和透明度.第2部分:冷固型油墨膠印 |
(Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 2: Coldset offset lithographic printing) |
| ISO 2846-3-2002 |
印刷技術.四色印刷油墨的顏色和透明度.第3部分:書刊凹版印刷 |
(Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 3: Publication gravure printing) |
| ISO 2846-4-2000 |
印刷技術.四色印刷油墨的色彩和透明度.第4部分:網板印刷 |
(Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 4: Screen printing) |
| ISO 2848-1984 |
建筑結構.模數協調.原則和規定 |
(Building construction; Modular coordination; Principles and rules) |
| ISO 2850-1973 |
工業用硫酸鉀.在105℃時質量損失的測定 |
(Potassium sulphate for industrial use; Determination of loss of mass at 105 degrees C) |
| ISO 2851-1993 |
食品工業用不銹鋼彎頭和三通 |
(Stainless steel bends and tees for the food industry) |
| ISO 2852-1993 |
食品工業用不銹鋼卡接管接頭 |
(Stainless steel clamp pipe couplings for the food industry) |
| ISO 2853-1993 |
食品工業用不銹鋼螺紋旋入管套 |
(Stainless steel threaded couplings for the food industry) |
| ISO 2854-1976 |
數據的統計說明.有關平均數與方差數的估算與試驗技術 |
(Statistical interpretation of data; Techniques of estimation and tests relating to means and variances) |
| ISO 2855-1976 |
放射性材料.包裝.材料泄漏和輻射泄漏 |
(Radioactive materials; Packagings; Test for contents leakage and radiation leakage) |
| ISO 2857 AMD 1-1984 |
修改件1 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 1) |
| ISO 2857 AMD 2-1986 |
第2次修改 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 2) |
| ISO 2857 Technical Corrigendum 1-1990 |
ISO米制螺紋公差為4H至8H和4G至6G的粗牙與細牙的磨制絲錐.螺紋部分制造公差.技術勘誤1 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; technical corrigendum 1) |
| ISO 2857-1973 |
ISO米制螺紋公差為4H至8H和4G至6G的粗牙與細牙的磨制絲錐.螺紋部分的制造公差 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion) |
| ISO 2858-1975 |
離心式末端軸吸泵(額定壓強 16巴).標記,標定工作點和尺寸 |
(End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions) |
| ISO 2859-0-1995 |
屬性檢驗的抽樣程序.第0部分:ISO 2859屬性抽樣系統的介紹 |
(Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system) |
| ISO 2859-1 Technical Corrigendum 1-2001 |
計數抽樣檢驗程序.第1部分:逐批檢驗時標明合格質量界限(AQL)的抽樣計劃.技術勘誤1 |
(Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection; Technical Corrigendum 1) |
| ISO 2859-1-1999 |
計數抽樣檢驗程序.第1部分:逐批檢驗時標明合格質量界限(AQL)的抽樣計劃 |
(Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection) |
| ISO 2859-2-1985 |
計數檢查的抽樣程序.第2部分:以批量單獨檢驗的極限質量為指標的抽樣方案 |
(Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection) |
| ISO 2859-3-1991 |
計數檢查的取樣規程.第3部分:箕斗式取樣規程 |
(Sampling procedures for inspection by attributes; part 3: skip-lot sampling procedures) |
| ISO 2859-4-2002 |
計數抽樣檢驗程序.第4部分:聲明質量級的評定程序 |
(Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels) |
| ISO 286-1-1988 |
公差和配合的 ISO系統.第1部分:公差的基礎,偏差和配合 |
(ISO system of limits and fits; part 1: bases of tolerances, deviations and fits) |
| ISO 286-2-1988 |
公差和配合的 ISO系統.第2部分:孔和軸的標準公差級和極限偏差表 |
(ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts) |
| ISO 2860-1992 |
土方機械.最小出入口尺寸 |
(Earth-moving machinery; minimum access dimensions) |
| ISO 2861-1-1974 |
真空技術.速離耦合器.尺寸.第1部分:夾鉗型 |
(Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type) |
| ISO 2861-2-1980 |
真空技術.速離耦合器.尺寸.第2部分:螺旋型 |
(Vacuum technology; Quick release couplings; Dimensions; Part 2 : Screwed type) |
| ISO 2863-1973 |
電影技術.8mmS-11 型電影攝影機膠片盒.膠片的運行長度.尺寸和規范 |
(Cinematography; Motion-picture camera cartridge, 8 mm Type S Model II; Run length of film; Dimensions and specifications) |
| ISO 2865 Technical Corrigendum 1-1991 |
金屬鋁生產用氧化鋁.硼含量測定.姜黃素分光光度法.技術勘誤1 |
(Aluminium oxide primarily used for the production of aluminium; determination of boron content; curcumin spectrophotometric method; technical corrigendum 1) |
| ISO 2865-1973 |
金屬鋁生產用氧化鋁.硼含量的測定.姜黃素分光光度法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method) |
| ISO 2866-1974 |
工業用硫磺.碳總含量的測定.滴定法 |
(Sulphur for industrial use; Determination of total carbon content; Titrimetric method) |
| ISO 2867-1994 |
土方機械.出入口裝置 |
(Earth-moving machinery - Access systems) |
| ISO 2868-1973 |
表面活性劑.洗滌劑.對酸水解穩定的陰離子活性物質.微量的測定 |
(Surface active agents; Detergents; Anionic-active matter stable to acid hydrolysis; Determination of trace amounts) |
| ISO 2869-1973 |
表面活性劑.洗滌劑.在堿性條件下可水解的陰離子活性物質.可水解和不可水解的陰離子活性物質的測定 |
(Surface active agents; Detergents; Anionic-active matter hydrolyzable under alkaline conditions; Determination of hydrolyzable and non-hydrolyzable anionic-active matter) |
| ISO 287-1985 |
紙和紙板.水份含量的測定.烘干法 |
(Paper and board; Determination of moisture content; Oven-drying method) |
| ISO 2870-1986 |
表面活性劑.洗滌劑.酸性條件下可水解的和不可水解的陰離子活性物質的測定 |
(Surface active agents; Detergents; Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions) |
| ISO 2871-1-1988 |
表面活性劑.洗滌劑-陽離子活性物質含量的測定.第1部分:高分子量陽極活性物質 |
(Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter) |
| ISO 2871-2-1990 |
表面活性劑.洗滌劑,陽離子活性物含量測定.第2部分:低分子團(200-500)的陽離子活性物質 |
(Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)) |
| ISO 2873-2000 |
包裝.完整滿裝運輸包裝件和成組裝運.低壓試驗 |
(Packaging - Complete, filled transport packages and unit loads - Low pressure test) |
| ISO 2875-2000 |
包裝.完整滿裝運輸包裝件和成組裝運.噴水試驗 |
(Packaging - Complete, filled transport packages and unit loads - Water-spray test) |
| ISO 2876-1985 |
包裝.滿裝的運輸包裝.滾動試驗 |
(Packaging; Complete, filled transport packages; Rolling test) |
| ISO 2877 AMD 1-1976 |
第1次修改 |
(Sulphuric acid for industrial use; determination of chlorides content; potentiometric method; amendment 1) |
| ISO 2877-1974 |
工業用硫酸.氯化物含量的測定.電位滴定法 |
(Sulphuric acid for industrial use; Determination of chlorides content; Potentiometric method) |
| ISO 2878-1987 |
硫化橡膠.抗靜電和導電的制品.電阻的測定 |
(Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com