標準號 |
中文名稱 |
英文名稱 |
| ISO 9327-5-1999 |
壓力用途的鋼鍛件和軋制或鍛造的棒材.技術交貨條件.第5部分:不銹鋼 |
(Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels) |
| ISO 9328-1-2003 |
壓力用途的扁鋼產品.交貨技術條件.第1部分:一般要求 |
(Steel flat products for pressure purposes - Technical delivery conditions - Part 1: General requirements ) |
| ISO 9328-1-2003 |
壓力用途的扁鋼產品.交貨技術條件.第1部分:一般要求 |
|
| ISO 9328-2-1991 |
壓力容器用鋼板和帶材.交貨技術條件.第2部分:具有規定室溫和高溫性能的非合金和低合金鋼 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 2: unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties) |
| ISO 9328-2-2004 |
壓力用途的扁鋼制品.交貨技術條件.第2部分:規定了高溫性能的非合金和合金鋼 |
|
| ISO 9328-3-1991 |
壓力容器用鋼板和帶材.交貨技術條件.第3部分:具有規定低溫性能的鎳合金鋼 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 3: nickel-alloyed steels with specified low temperature properties) |
| ISO 9328-3-2004 |
壓力用途扁鋼產品.交貨技術條件.第3部分:正火可焊細粒鋼 |
|
| ISO 9328-4-1991 |
壓力容器用鋼板和帶材.交貨技術條件.第4部分:正火、淬火和回火狀態提供的具有高屈服應力的可焊細晶粒鋼 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 4: weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition) |
| ISO 9328-4-2004 |
壓力用途扁鋼產品.交貨技術條件.第4部分:規定了低溫性能的鎳合金鋼 |
|
| ISO 9328-5-1991 |
壓力容器用鋼板和帶材.交貨技術條件.第5部分:奧氏體鋼 |
(Steel plates and strips for pressure purposes; technical delivery conditions; part 5: austenitic steels) |
| ISO 9328-5-2004 |
壓力用途扁鋼產品.交貨技術條件.第5部分:熱機輥軋可焊細粒鋼 |
|
| ISO 9328-6-2004 |
壓力用途扁鋼產品.交貨技術條件.第6部分:淬火和回火的可焊接細粒鋼 |
|
| ISO 9328-7-2004 |
壓力用途扁鋼產品.交貨技術條件.第7部分:不銹鋼 |
|
| ISO 9329-1-1989 |
受壓力的無縫鋼管.交貨技術條件.第1部分:規定室溫性能的非合金鋼 |
(Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties) |
| ISO 9329-2-1997 |
受壓力的無縫鋼管.交貨技術條件.第2部分:規定高溫性能的非合金鋼和合金鋼 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties) |
| ISO 9329-3-1997 |
壓力用途的無縫鋼管.交貨技術條件.第3部分:規定低溫性能的非合金鋼和合金鋼 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties) |
| ISO 9329-4-1997 |
受壓力的無縫鋼管.交貨技術條件.第4部分:奧氏體無縫鋼 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels) |
| ISO 9330-1-1990 |
受壓力的焊接鋼管.交貨技術條件.第1部分:規定室溫性能的非合金鋼管 |
(Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties) |
| ISO 9330-2-1997 |
壓力容器用焊接鋼管.交貨技術條件.第2部分:規定高溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties) |
| ISO 9330-3-1997 |
壓力容器用焊接鋼管.交貨技術條件.第3部分:規定低溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties) |
| ISO 9330-4-2000 |
焊接壓力鋼管.交貨技術條件.第4部分:規定高溫性能的埋弧焊接非合金鋼管和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties) |
| ISO 9330-5-2000 |
壓力容器用焊接鋼管.交貨技術條件.第5部分:規定低溫性能的埋弧焊接非合金鋼管和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties) |
| ISO 9330-6-1997 |
受壓力的焊接鋼管.交貨技術條件.第6部分:奧氏體不銹鋼管的焊接長度 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes) |
| ISO 9333-1990 |
鑲牙材料 |
(Dental brazing materials) |
| ISO 9334-1995 |
光學和光學儀器.光學傳遞函數.定義和數學關系 |
(Optics and optical instruments - Optical transfer function - Definitions and mathematical relationships) |
| ISO 9335-1995 |
光學和光學儀器.光學傳遞函數.測量原理和程序 |
(Optics and optical instruments - Optical transfer function - Principles and procedures of measurement) |
| ISO 9336-1-1994 |
光學和光學儀器.光傳遞函數的應用.第1部分:35 mm 靜物照相機用轉換鏡頭 |
(Optics and optical instruments - Optical transfer function - Application - Part 1: Interchangeable lenses for 35 mm still cameras) |
| ISO 9336-2-1994 |
光學和光學儀器.光傳遞函數的應用.第2部分:辦公室復印機用透鏡 |
(Optics and optical instruments - Optical transfer function - Application - Part 2: Lenses for office copiers) |
| ISO 9336-3-1994 |
光學和光學儀器.光傳遞函數的應用.第3部分:望遠鏡 |
(Optics and optical instruments - Optical transfer function - Application - Part 3: Telescopes) |
| ISO 9337-1-1999 |
接觸鏡片.后屈光度的測定.第1部分:手工聚焦的聚焦儀法 |
(Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing) |
| ISO 9337-2-2004 |
接觸鏡.后銀頂屈光度的測定.第2部分:浸漬在鹽水中的接觸鏡的測量 |
|
| ISO 9338-1996 |
光學和光學儀器.接觸眼鏡片直徑的測定 |
(Optics and optical instruments - Contact lenses - Determination of the diameters) |
| ISO 9339-1-1996 |
光學及光學儀器.接觸鏡片.厚度測定.第1部分:直接接觸鏡片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses) |
| ISO 9339-2 Technical Corrigendum 1-2000 |
光學及光學儀器.接觸鏡片.厚度測定.第2部分:水凝膠接觸鏡片.技術勘誤1 |
(Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1) |
| ISO 9339-2-1998 |
光學及光學儀器.接觸鏡片.厚度測定.第2部分:水凝膠接觸鏡片 |
(Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses) |
| ISO 934-1980 |
動植物脂肪和油.水含量的測定.夾帶法 |
(Animal and vegetable fats and oils; Determination of water content; Entrainment method) |
| ISO 9340-1996 |
光學及光學儀器.接觸鏡片.直接接觸鏡片的應力測定 |
(Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses) |
| ISO 9341-1996 |
光學及光學儀器.接觸鏡片.直接接觸鏡片中夾雜物和表面不完備性的測定 |
(Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses) |
| ISO 9342-1996 |
光學及光學儀器.焦距校正用檢驗透鏡 |
(Optics and optical instruments - Test lenses for calibration of focimeters) |
| ISO 9343-1988 |
手鉗和夾具.滑動結合手鉗.尺寸和試驗值 |
(Pliers and nippers - Slip joint pliers - Dimensions and test values) |
| ISO 9343-2004 |
夾扭鉗和剪切鉗.鯉魚鉗.尺寸和試驗值 |
|
| ISO 9344-1996 |
光學和光學儀器.顯微鏡.目鏡的分度 |
(Optics and optical instruments - Microscopes - Graticules for eyepieces) |
| ISO 9345-1-1996 |
光學和光學儀器.顯微鏡.有關機械參考面投影距離.第1部分:160mm長的管 |
(Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160 mm) |
| ISO 9345-2-2003 |
光學和光學儀器.顯微鏡.相對機械參考面的象距.第2部分:無限大光學校正系統 |
(Optics and optical instruments - Microscopes: Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems) |
| ISO 9345-2-2003 |
光學和光學儀器.顯微鏡.相對機械參考面的象距.第2部分:無限大光學校正系統 |
|
| ISO 9346 AMD 1-1996 |
隔熱.質量轉移.物理量和定義.修改件1 |
(Thermal insulation - Mass transfer - Physical quantities and definitions; Amendment 1) |
| ISO 9346-1987 |
熱絕緣.質量轉移.物理量和定義 |
(Thermal insulation - Mass transfer - Physical quantities and definitio) |
| ISO 9349-1991 |
預絕緣高強度鑄鐵管道系統 |
(Preinsulated ductile iron pipeline systems) |
| ISO 9349-2004 |
預絕緣球墨鑄鐵管道系統 |
|
| ISO 9349-2004 |
預絕緣球墨鑄鐵管道系統 |
|
| ISO 935-1988 |
動植物脂肪和油.滴定度的測定 |
(Animal and vegetable fats and oils; determination of titre) |
| ISO 9352-1995 |
塑料.用磨輪對抗磨耗性能的測定 |
(Plastics - Determination of resistance to wear by abrasive wheels) |
| ISO 9353-1991 |
玻璃增強塑料.膜袋模塑單向增強板的制備 |
(Glass-reinforced plastics; preparation of plates with unidirectional reinforcements by bag moulding) |
| ISO 9354 Technical Corrigendum 1-2000 |
紡織材料.編織.編碼系統和實例.技術勘誤1 |
(Textiles - Weaves - Coding system and examples; Technical Corrigendum 1) |
| ISO 9354-1989 |
紡織品.織法.代碼和實例 |
(Textiles; weaves; coding system and examples) |
| ISO 9355-1-1999 |
顯示和控制調節器設計的人類工效學要求.第1部分:用戶與顯示和控制調節器的相互作用 |
(Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays and control actuators) |
| ISO 9355-2-1999 |
顯示和控制調節器設計的人類工效學要求.第2部分:顯示 |
(Ergonomic requirements for the design of displays and control actuators - Part 2: Displays) |
| ISO 9356-1989 |
帶或不帶連接管件的聚烯烴管總成.抗內壓.試驗方法 |
(Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method) |
| ISO 9357-1990 |
作物保護設備.農用噴霧器.藥罐容積和灌注口直徑 |
(Equipment for crop protection; agricultural sprayers; tank nominal volume and filling hole diameter) |
| ISO 9358-1994 |
光學及光學儀器.成像系統的紗幕眩光.測量的定義及方法 |
(Optics and optical instruments - Veiling glare of image-forming systems - Definitions and methods of measurement) |
| ISO 9359-1989 |
空氣質量.環境空氣質量評定用分層取樣法 |
(Air quality; stratified sampling method for assessment of ambient air quality) |
| ISO 936-1998 |
肉和肉制品.總灰分的測定 |
(Meat and meat products - Determination of total ash) |
| ISO 9360-1-2000 |
麻醉和呼吸設備.使人體呼吸氣體增濕的熱和潮氣交換(HMEs).第1部分:與最小潮量一起使用的熱和潮氣交換 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml) |
| ISO 9360-2-2001 |
麻醉和呼吸設備.使人體呼吸氣體增濕的熱和潮氣交換器(HMEs).第2部分:潮氣量最小為250ml的氣管造口病人用熱 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml) |
| ISO 9361-1-1991 |
可轉位鑲齒刀具.圓角陶瓷鑲齒刀片.第2部分:無固定孔鑲齒刀片的尺寸 |
(Indexable inserts for cutting tools; ceramic inserts with rounded corners; part 1: dimensions of inserts without fixing hole) |
| ISO 9361-2-1991 |
可轉位鑲齒刀具.圓角陶瓷鑲齒刀片.第3部分:具有圓柱形固定孔的鑲齒刀片的尺寸 |
(Indexable inserts for cutting tools; ceramic inserts with rounded corners; part 2: dimensions of inserts with cylindrical fixing hole) |
| ISO 9362-1994 |
銀行事務.銀行事務遠程通訊電報.銀行鑒別碼 |
(Banking - Banking telecommunication messages - Bank identifier codes) |
| ISO 9363-1-1994 |
光學和光學議器.接觸鏡片.接觸鏡片材料的致癌性的測定.第1部分:瓊酯用作細菌固體培養基中的支持物的免疫擴 |
(Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test) |
| ISO 9364-2001 |
工業連續熱浸鍍鋁/鋅薄鋼板.制圖和結構特性 |
(Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities) |
| ISO 9366-2001 |
整體地板軟木彈性磚片.邊緣平直度和垂直度的測定與檢驗 |
(Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from straightness of edges) |
| ISO 9367-1-1989 |
滾裝船上道路車輛捆綁和固定裝置.一般要求.第1部分:商業車輛和車輛組合(半掛車除外) |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded) |
| ISO 9367-2-1994 |
滾裝船上汽車捆綁和固定裝置.一般要求.第2部分:半掛車 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 2: semi-trailers) |
| ISO 9368-1-1990 |
用稱量法測量封閉管道中液體的流量.測試裝置規程.第1部分:靜態稱量裝置 |
(Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; part 1: static weighing systems) |
| ISO 937-1978 |
肉和肉制品.氮含量的測定(參照法) |
(Meat and meat products; Determination of nitrogen content (Reference method)) |
| ISO 9370-1997 |
塑料.風化試驗中輻射曝光的儀器測定.一般導則和基本試驗方法 |
(Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method) |
| ISO 9373-1989 |
起重機和有關設備.試驗期間測量參數精確度的要求 |
(Cranes and related equipment; accuracy requirements for measuring parameters during testing) |
| ISO 9374-1-1989 |
起重機.提供的信息.第1部分:總則 |
(Cranes; information to be provided; part 1: general) |
| ISO 9374-3-2002 |
起重機.應提供的咨詢、定購、報價和供應信息.第3部分:塔式起重機 |
(Cranes - Information to be provided for enquiries, orders, offers and supply - Part 3: Tower cranes) |
| ISO 9374-4-1989 |
起重機.提供的信息.第4部分:動臂起重機 |
(Cranes; information to be provided; part 4: jib cranes) |
| ISO 9374-5-1991 |
起重機.提供的信息.第5部分:橋式起重機和龍門式起重機 |
(Cranes; information to be provided; part 5: overhead travelling cranes and portal bridge cranes) |
| ISO 9375-1989 |
木工機械.固定位置的砂輪機.術語 |
(Woodworking machines; disc sanding machines with spindle in fixed position; nomenclature) |
| ISO 9376-1988 |
早馬鈴薯.冷卻和冷藏運輸指南 |
(Early potatoes; guide to cooling and refrigerated transport) |
| ISO 9377-2-2000 |
水質.油氣指數的測定.第2部分:溶劑萃取法和氣相色譜法 |
(Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography) |
| ISO 9378-1993 |
攝影技術.微泡縮微膠片.ISO曝光速度和ISO曝光范圍 |
(Photography; vesicular microfilm; determination of ISO speed and ISO range) |
| ISO 9379-1989 |
門具.重復開、關門的試驗 |
(Doorsets; repeated opening and closing test) |
| ISO 938-1975 |
手控臺式運貨車.基本尺寸 |
(Hand-operated stillage trucks; Principal dimensions) |
| ISO 9380-1990 |
門具.反復扭轉試驗 |
(Doorsets; Repeated torsion test) |
| ISO 9381-1989 |
門具.靜態扭轉試驗 |
(Doorsets; static torsion test) |
| ISO 9382-1990 |
船載駁.全系列.分類和主要要求 |
(Shipborne barges, all series; classification and main requirements) |
| ISO 9383 AMD 1-2004 |
纖維增強水泥制品.屋面用小波瓦或非對稱截面瓦和配件.修改件1 |
|
| ISO 9383-1995 |
纖維加強水泥制品.屋頂和鑲面(建筑物)短波紋或不對稱的面板和配件 |
(Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing) |
| ISO 9384 AMD 1-2004 |
纖維水泥背瓦.修改件1 |
|
| ISO 9384-1991 |
纖維水泥墻面板 |
(Fibre-cement siding shingles) |
| ISO 9385-1990 |
玻璃及玻璃陶瓷.努氏硬度試驗 |
(Glass and glass-ceramics; Knoop hardness test) |
| ISO 9386-1-2000 |
運動性受損的殘疾人用動力操縱的提升平臺.安全、尺寸和功能操作規則.第1部分:垂直提升平臺 |
(Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 1: Vertical lifting platforms) |
| ISO 9386-2-2000 |
運動性受損的殘疾人用動力操縱的提升平臺.安全、尺寸和功能操作規則.第2部分:在一個傾斜面移動的就座者、站 |
(Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane) |
| ISO 9388-1992 |
鎳合金.磷含量測定.鉬蘭分子吸收光譜法 |
(Nickel alloys; determination of phosphorus content; molybdenum blue molecular absorption spectrometric method) |
| ISO 939-1980 |
香料和調味品.水含量的測定.挾帶法 |
(Spices and condiments; Determination of moisture content; Entrainment method) |
| ISO 9390-1990 |
水質.硼酸鹽的測定.用甲亞胺-H進行的光譜測定法 |
(Water quality; determination of borate; spectrometric method using azomethine-H) |
| ISO 9391-1993 |
水質.宏無脊椎生物的深水取樣.菌落使用導則 |
(Water quality; sampling in deep waters for macro-invertebrates; guidance on the use of colonization, qualitative and quantitative samplers) |
| ISO 9392-1989 |
膠凝軟木盤.密封性能 |
(Agglomerated cork discs; sealing behaviour) |
| ISO 9393-1-1994 |
熱塑性塑料閥門.壓力試驗方法.第1部分:總則 |
(Thermoplastics valves - Pressure test methods and requirements - Part 1: General) |
| ISO 9393-1-2004 |
工業用熱塑性閥門.壓力試驗方法和要求.第1部分:總則 |
|
| ISO 9393-2 Technical Corrigendum 1-1997 |
熱塑性塑料閥門.壓力試驗方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯閥門的試驗條件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1) |
| ISO 9393-2-1997 |
熱塑性塑料閥門.壓力試驗方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯閥門的試驗條件和 |
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves) |
| ISO 9394-1998 |
眼科光學.接觸鏡片和接觸透鏡護理制品.用兔眼睛研究目鏡法測定生物相溶性 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes) |
| ISO 9396-1997 |
塑料.酚醛樹脂.在使用自動裝置的特殊條件下甲價酚醛樹脂凝膠時間的測定 |
(Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus) |
| ISO 9397-1995 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
(Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method) |
| ISO 9398-1-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第1部分:家用織物熨燙機 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 1: Flatwork ironing machines) |
| ISO 9398-1-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第1部分:家用織物熨燙機 |
|
| ISO 9398-2-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第2部分:間歇式轉鼓烘燥機 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2: Batch drying tumblers) |
| ISO 9398-2-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第2部分:間歇式轉鼓烘燥機 |
|
| ISO 9398-3-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第3部分:管道式洗滌機 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 3: Washing tunnels) |
| ISO 9398-3-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第3部分:管道式洗滌機 |
|
| ISO 9398-4-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第4部分:洗滌脫水聯合機 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 4: Washer-extractors) |
| ISO 9398-4-2003 |
工業洗衣機規范.容量和能耗特性定義和測試.第4部分:洗滌脫水聯合機 |
|
| ISO 94-1982 |
紡織機械和附件.環錠細紗機和環錠捻線機的錠距 |
(Textile machinery and accessories; Spindle gauges for ring-spinning and ring-doubling frames) |
| ISO 940-1979 |
香料和調味品.醇不溶性萃取物的測定 |
(Spices and condiments; Determination of alcohol-soluble extract) |
| ISO 9400-1990 |
鎳基合金.抗晶間腐蝕性的測定 |
(Nickel-based alloys; determination of resistance to intergranular corrosion) |
| ISO 9401-1991 |
機床.電動夾盤的爪 |
(Machine tools; jaw mountings on power chucks) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com