標準號 |
中文名稱 |
英文名稱 |
| BS ISO 4798-1997 |
實驗室玻璃器皿.過濾漏斗 |
Laboratory glassware - Filter funnels |
| BS ISO 4800-1999 |
實驗室玻璃器皿.分液漏斗和滴液漏斗 |
Laboratory glassware - Separating funnels and dropping funnels |
| BS ISO 4834-1998 |
電影技術.不包括成條發行拷貝的磁性聲帶試驗?zāi)z片.基本技術特性 |
Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics |
| BS ISO 486-1995 |
電影技術.16mm電影膠片和穿孔的8mmR型電影膠片.裁剪和穿孔尺寸 |
Cinematography - 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions |
| BS ISO 487-1998 |
S和C型滾子鏈附件和鏈輪 |
Steel roller chains, types S and C, attachments and sprockets |
| BS ISO 4880-1997 |
織物和紡織品的燃燒性能.詞匯 |
Burning behaviour of textiles and textile products - Vocabulary |
| BS ISO 490-1995 |
電影技術.在沿單邊穿孔的16mm電影膠片上錄音用磁帶和磁頭縫隙(1型).位置和寬度尺寸 |
Cinematography - Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) - Positions and width dimensions |
| BS ISO 4902-1990 |
信息技術.數據通信.37路數據終端設備/數據通信設備(DTE/DCE)接口連接器和插腳號分配 |
Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4903-1990 |
信息技術.數據通信.15路數據終端設備/數據通信設備(DTE/DCE)接口連接器和插腳號分配 |
Information technology - Data communication - 15-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4909-2000 |
銀行卡.3列磁道的磁帶數據量 |
Bank cards - Magnetic stripe data content for track 3 |
| BS ISO 491-2002 |
電影攝影.35mm電影膠片和磁片.剪切和穿孔尺寸 |
Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions |
| BS ISO 4912-2002 |
紡織品.棉纖維.成熟度評估.顯微法 |
Textiles - Cotton fibres - Evaluation of maturity - Microscopic method |
| BS ISO 492-2002 |
滾動軸承.徑向軸承.公差 |
Rolling bearings - Radial bearings - Tolerances |
| BS ISO 4925-2005 |
道路車輛.液壓系統用非石油基制動液規范 |
|
| BS ISO 5-3-1996 |
攝影技術.密度測量.第3部分:光譜條件 |
Photography - Density measurements - Spectral conditions |
| BS ISO 5-4-1995 |
攝影.密度測量.反射密度測量用幾何學條件 |
Photography - Density measurements - Geometric conditions for reflection density |
| BS ISO 5007-2003 |
農用輪式拖拉機.駕駛員的座位.傳動振動的實驗室測量方法 |
(Agricultural wheeled tractors - operator’s seat - Laboratory measurement of transmitted vibration) |
| BS ISO 5008-2002 |
農業輪式拖拉機和田間作業機械.操作員全身振動試驗 |
Agricultural wheeled tractors and field machinery - Measurement of whole-body vibration of the operator |
| BS ISO 5011-2001 |
內燃機和壓縮機的空氣進氣清潔設備.性能測試 |
Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing |
| BS ISO 5024-1999 |
石油液體和液化石油氣體.測量.標準參比條件 |
Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions |
| BS ISO 5025-1998 |
增強產品.機織物.寬度和長度的測定 |
Reinforcement products - Woven fabrics - Determination of width and length |
| BS ISO 5057-1998 |
工業卡車.叉式起重車叉桿的修理和檢驗 |
Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks |
| BS ISO 509-1996 |
托盤.主要尺寸 |
Pallet trucks - Principal dimensions |
| BS ISO 513-2004 |
有規定切割邊界的金屬切削加工用硬質切削材料的分類和應用.用途大組和小組的名稱與符號 |
|
| BS ISO 5131-1996 |
聲學.農業和林業用拖拉機和機械.操作者座位上的噪音測量.檢測方法 |
Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator`s position - Survey method |
| BS ISO 516-1999 |
攝影技術.攝影機快門.定時 |
Photography - Camera shutters - Timing |
| BS ISO 5168-2005 |
流體流量的測量.不確定度評估程序 |
|
| BS ISO 5243-2004 |
紡織機械和附件.織機綜框和線錠的標準號 |
|
| BS ISO 5248-2003 |
紡織機械和附件.染整機械.輔助裝置詞匯 |
(Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary of ancillary devices) |
| BS ISO 525-1999 |
粘合磨料制品.總要求 |
Bonded abrasive products - General requirements |
| BS ISO 5250-2003 |
紡織機械與附件.染整機械.拉幅機和熱處理機械詞匯 |
(Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery) |
| BS ISO 5269-1-1999 |
紙漿.試驗用實驗室紙板的制備.第1部分:常規紙制造法 |
Pulps. Preparation of laboratory sheets for testing. Conventional sheet-former method |
| BS ISO 5285-2004 |
傳送帶.儲存和搬運指南 |
|
| BS ISO 5287-2003 |
皮帶傳動.汽車工業用窄V帶.疲勞試驗 |
(Belt drives - Narrow V-belts for the automotive industry - Fatigue test) |
| BS ISO 5288-2001 |
同步皮帶傳動.詞匯 |
Synchronous belt drives - Vocabulary |
| BS ISO 5290-2001 |
皮帶傳動.帶接頭的窄V型帶的槽形皮帶輪.9N/J,15N/J,20N/J和25N/J槽形截面(有效體系) |
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |
| BS ISO 5293-2004 |
輸送帶.三個導輥的最小變換距離的測定 |
|
| BS ISO 53-1998 |
通用和重型機械的圓柱齒輪.標準基本齒條輪廓 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| BS ISO 5344-2004 |
電動振動發生系統.性能特性 |
|
| BS ISO 5348-1998 |
機械振動和沖擊.加速計的機械安裝 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
| BS ISO 5350-3-1998 |
紙漿.污物和碎片的測定.第3部分:通過反射光檢驗 |
Pulps - Estimation of dirt and shives - Inspection by reflected light |
| BS ISO 5391-2004 |
氣動工具和機械.詞匯 |
|
| BS ISO 54-1997 |
通用機械和重型機械的圓柱齒輪.模數 |
(Cylindrical gears for general engineering and for heavy engineering - Modules) |
| BS ISO 5414-1-2002 |
有扁方柄刀具的螺釘壓緊刀具夾(立銑刀刀夾).第1部分:刀柄傳動系統的尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks |
| BS ISO 5414-2-2002 |
扁方柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第2部分:夾頭的連接尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation |
| BS ISO 5416-1997 |
直接還原鐵.金屬鐵含量的測定.溴-甲醇滴定法 |
Direct reduced iron - Determination of metallic iron content - Bromide-methanol titrimetric method |
| BS ISO 5418-1-1995 |
鐵礦石.銅含量的測定.第1部分:2,2`-吡奎瑙拉基(Biquinolyl)分光光度法 |
Iron ores - Determination of copper content - 2,2`-Biquinolyl spectrophotometric method |
| BS ISO 5426-2-1997 |
信息和文獻工作.目錄信息交換用拉丁字母的擴展代碼字符集.第2部分:用于歐洲小語種和舊印刷體的拉丁字母 |
Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange - Latin characters used in minor European languages and obsolete typography |
| BS ISO 5431-1999 |
皮革.濕鉻鞣革山羊皮.規范 |
Leather - Wet blue goat skins - Specification |
| BS ISO 5433-1999 |
皮革.濕鉻鞣革牛皮.規范 |
(Leather - Bovine wet blue - Specification) |
| BS ISO 5456-4-2001 |
技術制圖.投影法.中心投影 |
(Technical drawings - Projection methods - Central projection) |
| BS ISO 5459-2000 |
技術圖紙.幾何公差.幾何圖形公差的基準和基準系統 |
(Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances) |
| BS ISO 5466-1997 |
攝影.已處理的安全攝影膠片.存放技術 |
(Photography - Processed safety photographic films - Storage practices) |
| BS ISO 5473-1997 |
橡膠或塑料涂覆織物.耐擠壓性測定 |
(Rubber or plastics-coated fabrics - Determination of crush resistance) |
| BS ISO 5483-2004 |
船舶和海上技術.油箱和水箱的排水設施 |
|
| BS ISO 5507-2002 |
油料種子、植物油和脂肪.命名 |
(Oilseeds, vegetable oils and fats - Nomenclature) |
| BS ISO 5530-4-2002 |
小麥面粉.生面團物理特性.使用氣泡儀測定流變性能 |
(Wheat flour (Triticum aestivum L.) - Physical characteristics of doughs - Determination of rheological properties using an alveograph) |
| BS ISO 5536-2003 |
乳脂品.水含量的測定.卡爾.費休法 |
Milk fat products - Determination of water content - Karl Fischer method |
| BS ISO 5538-2004 |
乳和乳制品.取樣.計數檢驗 |
|
| BS ISO 5548-2004 |
酪蛋白和酪蛋白酸鹽.乳糖含量的測定.光度法 |
|
| BS ISO 5593-1998 |
滾動軸承.詞匯 |
(Rolling bearings - Vocabulary) |
| BS ISO 5596-2000 |
液壓傳動.隔離式儲氣蓄能器.壓力、容積的范圍和特性量 |
(Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities) |
| BS ISO 5599-1-2001 |
氣壓液動.五通方向控制閥.不帶電連接器的安裝接口表面 |
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 |
氣壓液動.五通方向控制閥.任選電氣連接器的安裝接口面 |
Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector |
| BS ISO 5626-1994 |
紙.耐折彎性測定 |
Paper - Determination of folding endurance |
| BS ISO 5631-2001 |
紙和板.顏色的測定(C/2°).漫反射法 |
Paper and board - Determination of colour (C/2 ? - Diffuse reflectance method |
| BS ISO 5636-4-2005 |
紙和紙板.透氣性的測定(中等范圍).謝菲爾德方法 |
|
| BS ISO 5652-1990 |
信息技術.信息交換用9磁道、12.7mm(0.5in)寬磁帶.使用246字符/mm(6250字符/in)編碼字符集的格式和錄制 |
Information processing - 9-track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - Format and recording, using group coding at 246 cpmm (6250 cpi) |
| BS ISO 5655-2001 |
攝影技術.工業X射線照相膠片和金屬增感屏.尺寸 |
Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions |
| BS ISO 5658-2-1997 |
燃燒試驗.火焰?zhèn)鞑?第2部分:直立布局中建筑產品側面的火焰蔓延程度 |
Reaction to fire tests - Spread of flame - Lateral spread on building products in vertical configuration |
| BS ISO 5658-4-2001 |
燃燒試驗反應.火焰?zhèn)鞑?垂直定向樣品火焰垂直傳播的中型試驗 |
(Reaction to fire tests - Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen) |
| BS ISO 5667-17-2000 |
水質.取樣.懸浮沉淀物的取樣指南 |
Water quality - Sampling - Guidance on sampling of suspended sediments |
| BS ISO 5667-18-2001 |
水質.取樣.污染地區地下水取樣指南 |
Water quality - Sampling - Guidance on sampling of groundwater at contaminated sites |
| BS ISO 5681-2002 |
農作物保護設備.詞匯 |
Equipment for crop protection - Vocabulary |
| BS ISO 5687-2003 |
收割設備.聯合收割機.谷物箱容量和卸料裝置性能的測定和標注 |
Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance |
| BS ISO 5692-1-2004 |
農用車輛.拖掛車輛的機械連接裝置.掛接環的尺寸 |
|
| BS ISO 5707-1997 |
擠奶裝置.結構和性能 |
Milking machine installations - Construction and performance |
| BS ISO 5718-2002 |
收割機.農用旋轉式割草機刀片.要求 |
Harvesting equipment - Blades for agricultural rotary mowers - Requirements |
| BS ISO 5725-1-1995 |
測量方法和結果的精確性(精度和精確度).一般原則和定義 |
Accuracy (trueness and precision) of measurement methods and results - General principles and definitions |
| BS ISO 5725-2-1995 |
測量方法和結果的精確性(精度和精密度).標準測量方法的重復性和再現性測定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| BS ISO 5725-3-1995 |
測量方法和測量結果的精確性(精度和精密度).第3部分;標準測量方法的精密度的間歇性測量 |
Accuracy (trueness and precision) of measurement methods and results - Intermediate measures of the precision of a standard measurement method |
| BS ISO 5725-4-1995 |
測量方法和測量結果的精確性(精度和精密度).第4部分;標準測量方法的真實測定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method |
| BS ISO 5725-5-1998 |
測量方法和結果的準確度.標準測量方法精度測定的迭代法 |
Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method |
| BS ISO 5725-6-1995 |
測量方法和測量結果的精確性(精度和精密度).第6部分;準確值的實際應用 |
Accuracy (trueness and precision) of measurement methods and results - Use in practice of accuracy values |
| BS ISO 5738-2004 |
乳和乳制品.銅含量的測定.光度參照法 |
|
| BS ISO 5739-2003 |
酪蛋白和酪蛋白酸鹽.焦粒和外部物質含量的測定 |
Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter |
| BS ISO 5742-2004 |
夾扭鉗和剪切鉗.術語 |
|
| BS ISO 5743-2004 |
夾扭鉗和剪切鉗.通用技術條件 |
|
| BS ISO 5744-2004 |
夾扭鉗和剪切鉗.試驗方法 |
|
| BS ISO 5745-2004 |
夾扭鉗和剪切鉗.夾扭鉗.尺寸和試驗值 |
|
| BS ISO 5746-2004 |
夾扭鉗和剪切鉗.鉗工鉗和電工鉗.尺寸和試驗值 |
|
| BS ISO 5748-2004 |
夾扭鉗和剪切鉗.頂切鉗.尺寸和試驗值 |
|
| BS ISO 5749-2004 |
夾扭鉗和剪切鉗.斜嘴鉗.尺寸和試驗值 |
|
| BS ISO 5751-1-2004 |
摩托車輪胎和輪輞(米制系列).設計指南 |
|
| BS ISO 5751-1-2004 |
摩托車輪胎和輪輞(米制系列).設計指南 |
|
| BS ISO 5751-3-2004 |
摩托車輪胎和輪輞(米制系列).配套輪輞輪廓范圍 |
|
| BS ISO 5751-3-2004 |
摩托車輪胎和輪輞(米制系列).配套輪輞輪廓范圍 |
|
| BS ISO 5758-2003 |
電影.供交換用影片及磁性(聲跡)素材.容器標簽的最低限內容 |
(Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials) |
| BS ISO 5765-1-2002 |
奶粉、干冰混合物和加工的奶酪.測定乳糖含量.利用乳糖中葡萄糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the glucose moiety of the lactose |
| BS ISO 5765-2-2002 |
奶粉、干冰混合物和加工的奶酪.測定乳糖含量.利用乳糖中半乳糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the galactose moiety of the lactose |
| BS ISO 5768-1999 |
電影技術.16mm電影膠片在W 型電影攝影機片窗上形成的影象.位置和尺寸 |
Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions |
| BS ISO 5781-2000 |
液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.安裝面 |
Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 5782-1-1998 |
氣壓傳動.空氣壓縮過濾器.供貨商文件應包括的主要特性和產品標志要求 |
Pnuematic fluid power - Compressed air filters - Main characteristics to be included in supplier`s literature and product-marking requirements |
| BS ISO 5782-2-1998 |
氣壓傳動.空氣壓縮過濾器.測定包括在供貨商文件中的主要特性的試驗方法 |
Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier`s literature |
| BS ISO 5796-2000 |
橡膠配方配合劑.天然碳酸鈣.試驗方法 |
Rubber compounding ingredients - Natural calcium carbonate - Test methods |
| BS ISO 5797-2004 |
造船和海上技術.耐火結構的窗和側舷窗 |
|
| BS ISO 5797-2004 |
造船和海上技術.耐火結構的窗和側舷窗 |
|
| BS ISO 5799-1995 |
攝影技術.醫用和牙科用直接爆光射線攝影膠片/處理系統.ISO感光速度和ISO平均梯度的測定 |
Photography - Direct-exposing medical and dental radiographic film/process systems - Determination of ISO speed and ISO average gradient |
| BS ISO 5800-1995 |
攝影技術.靜物照相用彩色負片.ISO感光度的測定 |
Photography - Colour negative films for still photography - Determination of ISO speed |
| BS ISO 5805-1998 |
機械振動和沖擊.人體暴露.詞匯 |
Mechanical vibration and shock - Human exposure - Vocabulary |
| BS ISO 582-1995 |
滾動軸承.倒角尺寸.最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| BS ISO 5832-2-1999 |
外科植入物.金屬材料.非合金鈦 |
Implants for surgery - Metallic materials - Unalloyed titanium |
| BS ISO 5833-2002 |
外科植入物.丙烯酸樹脂粘接劑 |
Implants for surgery - Acrylic resin cements |
| BS ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.粉劑型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Powder form |
| BS ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Moulded forms |
| BS ISO 5834-4-2005 |
外科植入物.超高分子量聚乙烯.氧化指數測量法 |
|
| BS ISO 5841-2-2001 |
外科植入物.心臟起搏器.對使用脈搏發生器的人群的臨床實踐報告 |
Implants for surgery - Cardiac pacemakers - Reporting of clinical performance of populations of pulse generators or leads |
| BS ISO 5893-2002 |
橡膠和塑料的試驗設備.拉伸、彎曲和壓縮型.規范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| BS ISO 5894-2000 |
船和造船技術.有螺栓緊固蓋的人孔 |
Ships and marine technology - Manholes with bolted covers |
| BS ISO 5912-2004 |
野營帳篷 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com