標準號 |
中文名稱 |
英文名稱 |
| EN ISO 8502-4-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第4部分：油覆前凝露可能性的評定導則 |
Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993) |
| EN ISO 8502-6-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第6部分：分析用可溶性雜質的提取 Bresle法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995) |
| EN ISO 8502-9-2000 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第9部分：水溶性鹽的現場電導測定法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998) |
| EN ISO 8503-1-1995 |
涂裝油漆和有關產品前鋼材預處理噴射清理鋼材的表面粗糙度特性第1部分：磨料噴射清理表面粗糙度的ISO評 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr |
| EN ISO 8503-2-1995 |
涂裝油漆和有關產品前鋼材預處理噴射清理鋼材的表面粗糙度特性第2部分：磨料噴射清理表面粗糙度的定級 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce |
| EN ISO 8503-3-1995 |
涂裝油漆和有關產品前鋼材預處理噴射清理鋼材的表面粗糙度特性第3部分：ISO表面輪廓比較儀的校準方法和 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8503-4-1995 |
涂裝油漆和有關產品前鋼材預處理噴射清理鋼材的表面粗糙度特性第4部分：ISO表面輪廓比較儀的校準方法和 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8504-1-2001 |
涂裝油漆和有關產品前鋼材預處理表面預處理方法第1部分：總則 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
| EN ISO 8504-2-2001 |
涂裝油漆和有關產品前鋼材預處理表面預處理方法第2部分：磨料噴射清理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 8504-3-2001 |
涂裝油漆和有關產品前鋼材預處理表面預處理方法第3部分：手工和動力工具清洗 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993) |
| EN ISO 8536-1-2003 |
醫用輸液器具第1部分：玻璃輸液瓶 |
Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2000) |
| EN ISO 8536-2-2002 |
醫用輸液器具第2部分：輸液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001) |
| EN ISO 8536-8-2004 |
醫用輸液器具.第8部分:有壓力輸液儀的輸液器具 |
|
| EN ISO 8560-1999 |
技術制圖建筑工程制圖模數尺寸圖、圖線和網格的畫法 |
Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986) |
| EN ISO 8561-1995 |
家用無霜制冷設備冷藏箱、冷凍冷藏柜、冷凍食品儲藏柜和強力空氣循環冷卻的食品冷藏柜特性和試驗方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995) |
| EN ISO 8565-1995 |
金屬與合金大氣腐蝕試驗野外試驗的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992) |
| EN ISO 8580-1995 |
橡膠與塑料軟管穩定狀態下耐紫外線的測定 |
Rubber and plastic hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) |
| EN ISO 8596-1996 |
眼科光學視覺敏銳度測驗標準驗光字體及其演示 |
Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994) |
| EN ISO 8597-1996 |
光學與光學儀器視覺敏銳度測驗與驗光字體相關的方法 |
Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995) |
| EN ISO 8598-1998 |
光學與光學儀器焦距計 |
Optics and optical instruments - Focimeters (ISO 8598:1996) |
| EN ISO 8599-1996 |
光學與光學儀器隱形眼鏡光譜和光透射率的測定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994) |
| EN ISO 8611-1-2004 |
物料搬運用托盤.平托盤.第1部分:試驗方法 |
|
| EN ISO 8612-2001 |
眼科儀器張力計 |
Ophthalmic instruments - Tonometers (ISO 8612:2001) |
| EN ISO 8618-1998 |
塑料液態酚醛樹脂非揮發性物質的常規測定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995) |
| EN ISO 8619-1998 |
塑料酚醛樹脂粉在加熱玻璃盤上流動距離的測定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995) |
| EN ISO 862-1995 |
表面活性劑詞匯三種語言版 |
Surface active agents - Vocabulary - Trilingual version (ISO 862:1984/Cor. 1:1993) |
| EN ISO 8620-1995 |
塑料酚醛樹脂粉篩析用噴氣篩設備進行過濾分析 |
Plastics - Phenolic resin powder - Sieve analysis - Sieve analysis using air-jet sieve apparatus (ISO 8620:1986) |
| EN ISO 8624-2002 |
眼科光學眼鏡架測量系統與術語 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002) |
| EN ISO 8655-1-2002 |
活塞操縱的容量設備第1部分：術語、一般要求與用戶建議 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommandations (ISO 8655-1:2002) |
| EN ISO 8655-2-2002 |
活塞操縱的容量設備第2部分：活塞吸液管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) |
| EN ISO 8655-3-2002 |
活塞操縱的容量設備第3部分：活塞量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002) |
| EN ISO 8655-4-2002 |
活塞操縱的容量設備第4部分：稀釋器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002) |
| EN ISO 8655-5-2002 |
活塞操縱的容量設備第5部分：分配器 |
Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002) |
| EN ISO 8655-6-2002 |
活塞操縱的容量設備第6部分：判定測量誤差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002) |
| EN ISO 8662-10-1998 |
便攜式手提動力工具手柄振動測量第10部分：沖剪與剪切 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998) |
| EN ISO 8662-12-1997 |
便攜式手提動力工具手柄振動測量第12部分：往復式鋸和銼以擺動或旋轉式鋸 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997) |
| EN ISO 8662-13-1997 |
便攜式手提動力工具手柄振動測量第13部分：模具研磨機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
| EN ISO 8662-14-1996 |
便攜式手提動力工具手柄振動測量第14部分：采石工具和針束除銹機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996) |
| EN ISO 8662-2/prA2-2000 |
便攜式手提動力工具手柄振動測量第2部分：鑿錘和鉚釘錘修改2 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 2 (ISO 8662-2:1992/AMD 1:1999) |
| EN ISO 8662-3/prA2-2000 |
便攜式手提動力工具手柄振動測量第3部分：巖石鉆頭和旋轉錘修改2 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 2 (ISO 8662-3:1992/AMD 1:1999) |
| EN ISO 8662-4-1995 |
便攜式手提動力工具手柄振動測量第4部分：磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994) |
| EN ISO 8662-6-1995 |
便攜式手提動力工具手柄振動測量第6部分：沖擊鉆 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994) |
| EN ISO 8662-7-1997 |
便攜式手提動力工具手柄振動測量第7部分：具有沖擊、脈沖或棘輪作用力的扳手、螺絲刀和擰螺母機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) |
| EN ISO 8662-8-1997 |
便攜式手提動力工具手柄振動測量第8部分：拋光機和旋轉式軌道和特殊軌道磨光機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
| EN ISO 8662-9-1996 |
便攜式手提動力工具手柄振動測量第9部分：汽錘 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996) |
| EN ISO 8666-2002 |
小艇主要數據 |
Small craft - Principal data (ISO 8666:2002) |
| EN ISO 8669-2-1996 |
尿收集袋第2部分：要求與測試方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996) |
| EN ISO 8670-2-1996 |
造口術收集袋第2部分：要求和測試方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996) |
| EN ISO 8673-2000 |
六角螺母,1型米制細牙螺紋產品等級A和B級 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999) |
| EN ISO 8674-2000 |
六角螺母,2型米制細牙螺紋產品等級A和B級 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999) |
| EN ISO 8675-2000 |
六角薄螺母(倒角)米制細牙螺紋產品等級A和B級 |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999) |
| EN ISO 8676-2000 |
米制細牙六角頭螺釘產品等級A和B級 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) |
| EN ISO 868-2003 |
塑料與硬質橡膠用硬度計測定壓痕硬度［肖氏(SHORE)硬度］ |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8689-1-2000 |
水質江河中生物的分類第1部分：對底棲微型無脊椎動物調查的生物質量數據的解釋方法指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000) |
| EN ISO 8689-2-2000 |
水質江河中生物的分類第2部分：對底棲微型無脊椎動物調查的生物質量數據的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000) |
| EN ISO 8692-2004 |
水質.用單細胞綠藻進行淡水藻類生長抑制性試驗 |
|
| EN ISO 8728-1998 |
船舶與海上技術船用陀羅羅經 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997) |
| EN ISO 8729-1998 |
船舶與海上技術船用雷達反射器 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997) |
| EN ISO 8733-1997 |
不淬硬鋼或奧氏體不銹鋼內螺紋圓柱銷 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997) |
| EN ISO 8734-1997 |
淬硬鋼和馬氏體不銹鋼(定位銷)圓柱銷 |
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
| EN ISO 8735-1997 |
淬硬鋼或馬氏體不銹鋼內螺紋圓柱銷 |
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
| EN ISO 8739-1997 |
槽銷帶導桿及全長平行溝槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
| EN ISO 8740-1997 |
槽銷帶倒角及全長平行溝槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
| EN ISO 8741-1997 |
槽銷半長倒錐槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997) |
| EN ISO 8742-1997 |
槽銷中部槽長為1/3全長 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
| EN ISO 8743-1997 |
槽銷中部槽長為1/2全長 |
Grooved pins - Half-length centre grooved (ISO 8743:1997) |
| EN ISO 8744-1997 |
槽銷全長錐槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997) |
| EN ISO 8745-1997 |
槽銷半長錐槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997) |
| EN ISO 8746-1997 |
圓頭槽銷 |
Grooved pins with round head (ISO 8746:1997) |
| EN ISO 8747-1997 |
沉頭槽銷 |
Grooved pins with countersunk head (ISO 8747:1997) |
| EN ISO 8748-1997 |
彈性圓柱銷卷制、重型 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997) |
| EN ISO 8750-1997 |
彈性圓柱銷卷制、標準型 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997) |
| EN ISO 8751-1997 |
彈性圓柱銷卷制、輕型 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997) |
| EN ISO 8752-1997 |
彈性圓柱銷開槽、重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997) |
| EN ISO 8754-2003 |
石油產品含硫量的測定非擴散型X－射線熒光光譜法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN ISO 8765-2000 |
米制細牙六角頭螺栓產品等級A和B級 |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) |
| EN ISO 877-1996 |
塑料玻璃板下日光暴曬耐老化及性能測定 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 8780-1-1995 |
顏料和體質顏料評定分散性的分散方法第1部分：綜述 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990) |
| EN ISO 8780-2-1995 |
顏料和體質顏料評定分散性的分散方法第2部分：用振蕩機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990) |
| EN ISO 8780-3-1995 |
顏料和體質顏料評定分散性的分散方法第3部分：用高速粉碎機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990) |
| EN ISO 8780-4-1995 |
顏料和體質顏料評定分散性的分散方法第4部分：用壓研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
| EN ISO 8780-5-1995 |
顏料和體質顏料評定分散性的分散方法第5部分：用自動研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990) |
| EN ISO 8780-6-1995 |
顏料和體質顏料評定分散性的分散方法第6部分：用三轅研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990) |
| EN ISO 8781-1-1995 |
顏料和體質顏料分散性評定方法第1部分：有色顏料著色力變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990) |
| EN ISO 8781-2-1995 |
顏料和體質顏料分散性評定方法第2部分：磨碎細度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990) |
| EN ISO 8781-3-1995 |
顏料和體質顏料分散性評定方法第3部分：光澤變化評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990) |
| EN ISO 8785-1999 |
產品幾何量技術規范（GPS）表面缺陷術語、定義和參數 |
Geometrical product specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
| EN ISO 8795-2001 |
人類生活用水輸送用塑料管道系統遷移評定塑料管道遷移值的測定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) |
| EN ISO 8799-1995 |
表面活性劑乙氧基化醇和烷基酚硫酸鹽未硫酸化物含量的測定 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988) |
| EN ISO 8819-1995 |
液化石油氣硫化氫的測定乙酸鉛法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993) |
| EN ISO 8826-1-1995 |
技術制圖滾動軸承第1部分：通用簡化畫法 |
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989) |
| EN ISO 8847-2004 |
小艇.操舵裝置.鋼索和滑輪系統 |
|
| EN ISO 8849-2003 |
小艇 電動直流艙底泵 |
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
| EN ISO 887-2000 |
米制普通螺栓、螺釘和螺母用平墊圈總方案 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) |
| EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.第1部分:水蒸汽中的提取物 |
|
| EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.第2部分:識別和表征 |
|
| EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.第3部分:釋放粒子計數的測定 |
|
| EN ISO 8872-2003 |
輸血、輸液和注射瓶鋁蓋 一般要求和試驗方法 |
Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) |
| EN ISO 8891-2000 |
貴金屬含量至少為25%但不低于75%的牙科用鑄造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
| EN ISO 8892-1995 |
油料餅粕殘留已烷總量的測定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987) |
| EN ISO 8968-1-2001 |
牛奶含氮量的測定第1部分：凱氏法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001) |
| EN ISO 8968-2-2001 |
牛奶含氮量的測定第2部分：分段溶解法(宏觀法) |
Milk - Determination of nitrogen content - Part 2: Block digestion method (Macro method) (ISO 8968-2:2001) |
| EN ISO 8968-4-2001 |
牛奶含氮量的測定第4部分：非蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 4: Determination of non-protein nitrogen content (ISO 8968-4:2001) |
| EN ISO 8968-5-2001 |
牛奶含氮量的測定第5部分：蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001) |
| EN ISO 8973-1999 |
液化石油氣密度和蒸氣壓的計算 |
Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997) |
| EN ISO 8974-2002 |
塑料酚醛樹脂用氣體色譜法測定殘余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002) |
| EN ISO 8975-1995 |
塑料酚醛樹脂pH值的測定 |
Plastics - Phenolic resins - Determination of pH (ISO 8975:1989) |
| EN ISO 898-1-1999 |
碳鋼和鑄鋼鑄造的緊固件機械性能第1部分：螺栓、螺釘和螺柱 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) |
| EN ISO 898-5-1998 |
碳鋼和鑄鋼鑄造的緊固件機械性能第5部分：緊定螺釘及類似的不受拉應力的螺紋緊固件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998) |
| EN ISO 898-6-1995 |
緊固件機械性能第6部分：規定保證載荷值的螺母 細牙螺紋 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN ISO 8980-1-1997 |
眼科光學未切邊成品眼鏡片第1部分：單焦點和多焦點鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996) |
| EN ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.第1部分:單焦點和多焦點鏡片規范 |
|
| EN ISO 8980-2-1997 |
眼科光學未切邊成品眼鏡片第2部分：漸變焦鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996) |
| EN ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.第2部分:漸變焦眼鏡片規范 |
|
| EN ISO 8980-3-1999 |
眼科光學未切邊成品眼鏡片第3部分：透光性規范和試驗方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999) |
| EN ISO 8980-4-2000 |
眼科光學未切邊成品眼鏡片第4部分：防反射涂層的試驗方法和規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000) |
| EN ISO 8985-1998 |
塑料乙烯／乙酸乙烯共聚物(EVAC)熱塑塑料乙酸乙烯含量的測定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998) |
| EN ISO 8986-1-1999 |
塑料聚丁烯模塑和擠塑材料第1部分：命名體系和基本規范 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993) |
| EN ISO 8987-1998 |
塑料酚醛樹脂在Ｂ轉變試驗板上的活化性能的測定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995) |
| EN ISO 8988-1997 |
塑料酚醛樹脂六次甲基四胺含量的測定凱氏法和過氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com