標準號 |
中文名稱 |
英文名稱 |
| ISO 1389-2-1977 |
工業用鄰苯二甲酸酐.試驗方法.第2部分:溶解物顏色的測定 |
(Phthalic anhydride for industrial use; Methods of test; Part II : Measurement of colour of the molten material) |
| ISO 1389-3-1977 |
工業用鄰苯二甲酸酐.試驗方法.第2部分:顏色穩定性的測定 |
(Phthalic anhydride for industrial use; Methods of test; Part III : Measurement of colour stability) |
| ISO 1389-4-1977 |
工業用鄰苯二甲酸酐.試驗方法.第4部分:用硫酸處理后顏色的測定 |
(Phthalic anhydride for industrial use; Methods of test; Part IV : Measurement of colour after treatment with sulphuric acid) |
| ISO 1389-5-1977 |
工業用鄰苯二甲酸酐.試驗方法.第5部分:游離酸度的測定.電位滴定法 |
(Phthalic anhydride for industrial use; Methods of test; Part V : Determination of free acidity; Potentiometric method) |
| ISO 1389-6-1977 |
工業用鄰苯二甲酸酐.試驗方法.第6部分:鄰苯二甲酸酐含量的測定.滴定法 |
(Phthalic anhydride for industrial use; Methods of test; Part VI : Determination of phthalic anhydride content; Titrimetric method) |
| ISO 1389-7-1977 |
工業用鄰苯二甲酸酐.試驗方法.第7部分:順丁烯二酸酐含量的測定.極譜法 |
(Phthalic anhydride for industrial use; Methods of test; Part VII : Determination of maleic anhydride content; Polarographic method) |
| ISO 1389-8-1977 |
工業用鄰苯二甲酸酐.試驗方法.第8部分:灰分的測定 |
(Phthalic anhydride for industrial use; Methods of test; Part VIII : Determination of ash) |
| ISO 1389-9-1977 |
工業用鄰苯二甲酸酐.試驗方法.第9部分:在冷態下可被高錳酸鉀氧化的雜質含量的測定.碘量法 |
(Phthalic anhydride for industrial use; Methods of test; Part IX : Determination of impurities oxidizable in the cold by potassium permanganate; Iodometric method) |
| ISO 13894-1-2000 |
高壓裝飾性疊層板材.復合成份.第1部分:試驗方法 |
(High-pressure decorative laminates - Composite elements - Part 1: Test methods) |
| ISO 13895-1996 |
膠粘劑.塑料的安全制備用導則 |
(Adhesives - Guidelines for the surface preparation of plastics) |
| ISO 13897 Technical Corrigendum 1-2003 |
牙科學.汞齊合金膠囊.技術勘誤1 |
|
| ISO 13897-2003 |
牙科學.汞齊合金膠囊 |
(Dentistry - Amalgam capsules) |
| ISO 13897-2003 |
牙科學.汞齊合金膠囊 |
|
| ISO 13898-1-1997 |
鋼和鐵.鎳,銅和鈷含量的測定.電感耦合等離子體原子發射光譜分析法.第1部分:一般要求和試樣溶解 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 1: General requirements and sample dissolution) |
| ISO 13898-2-1997 |
鋼和鐵.鎳,銅和鈷含量的測定.電感耦合等離子體原子發射光譜分析法.第2部分:鎳含量的測定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of nickel content) |
| ISO 13898-3-1997 |
鋼和鐵.鎳,銅和鈷含量的測定.電感耦合等離子體原子發射光譜分析法.第3部分:銅含量的測定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of copper content) |
| ISO 13898-4-1997 |
鋼和鐵.鎳,銅和鈷含量的測定.電感耦合等離子體原子發射光譜分析法.第4部分:鈷含量的測定 |
(Steel and iron - Determination of nickel, copper and cobalt contents - Inductively coupled plasma atomic emission spectrometric method - Part 4: Determination of cobalt content) |
| ISO 139-1973 |
紡織品.調濕和試驗用標準大氣 |
(Textiles; Standard atmospheres for conditioning and testing) |
| ISO 1390-1-1977 |
工業用順丁烯二酸酐.試驗方法.第1部分:總則 |
(Maleic anhydride for industrial use; Methods of test; Part I : General) |
| ISO 1390-2-1977 |
工業用順丁烯二酸酐.試驗方法.第2部分:溶解物質顏色的測定 |
(Maleic anhydride for industrial use; Methods of test; Part II : Measurement of colour of the molten material) |
| ISO 1390-3-1977 |
工業用順丁烯二酸酐.試驗方法.第3部分:游離酸度的測定.電位滴定法 |
(Maleic anhydride for industrial use; Methods of test; Part III : Determination of free acidity; Potentiometric method) |
| ISO 1390-4-1977 |
工業用順丁烯二酸酐.試驗方法.第4部分:順丁烯二酸酐含量的測定.滴定法 |
(Maleic anhydride for industrial use; Methods of test; Part IV : Determination of maleic anhydride content; Titrimetric method) |
| ISO 1390-5-1977 |
工業用順丁烯二酸酐.試驗方法.第5部分:灰分的測定 |
(Maleic anhydride for industrial use; Methods of test; Part V : Determination of ash) |
| ISO 1390-6-1977 |
工業用順丁烯二酸酐.試驗方法.第6部分:鐵含量的測定.2,2`-聯吡啉光度法 |
(Maleic anhydride for industrial use; Methods of test; Part VI : Determination of iron content; 2,2`- Bipyridyl photometric method) |
| ISO 13900-1997 |
鋼.硼含量測定.蒸餾后姜黃素光譜測定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation) |
| ISO 13902-1997 |
鋼和鐵.高硫含量的測定.感應爐燃燒后的紅外線吸收法 |
(Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace) |
| ISO 13909-1-2001 |
硬煤和焦炭.機械取樣.第1部分:一般介紹 |
(Hard coal and coke - Mechanical sampling - Part 1: General introduction) |
| ISO 13909-2-2001 |
硬煤和焦炭.機械取樣.第2部分:煤.流動取樣 |
(Hard coal and coke - Mechanical sampling - Part 2: Coal; Sampling from moving streams) |
| ISO 13909-3-2001 |
硬煤和焦炭.機械取樣.第2部分:煤.靜止批中取樣 |
(Hard coal and coke - Mechanical sampling - Part 3: Coal; Sampling from stationary lots) |
| ISO 13909-4-2001 |
硬煤和焦炭.機械取樣.第4部分:煤.試驗樣品的制備 |
(Hard coal and coke - Mechanical sampling - Part 4: Coal; Preparation of test samples) |
| ISO 13909-5-2001 |
硬煤和焦炭.機械取樣.第5部分:焦炭.流動取樣 |
(Hard coal and coke - Mechanical sampling - Part 5: Coke; Sampling from moving streams) |
| ISO 13909-6-2001 |
硬煤和焦炭.機械取樣.第6部分:焦炭.試驗樣品的制備 |
(Hard coal and coke - Mechanical sampling - Part 6: Coke; Preparation of test samples) |
| ISO 13909-7-2001 |
硬煤和焦炭.機械取樣.第7部分:取樣精度測定方法、樣品制備方法及試驗方法 |
(Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing) |
| ISO 13909-8-2001 |
硬煤和焦炭.機械取樣.第8部分:偏差試驗方法 |
(Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias) |
| ISO 1391-1-1976 |
工業用仲甲醛.試驗方法.第1部分:總則 |
(Paraformaldehyde for industrial use; Methods of test; Part 1 : General) |
| ISO 1391-2-1976 |
工業用仲甲醛.試驗方法.第2部分:灰分的測定 |
(Paraformaldehyde for industrial use; Methods of test; Part 2 : Determination of ash) |
| ISO 1391-3-1976 |
工業用仲甲醛.試驗方法.第3部分:鐵含量的測定.2,2`-聯吡啶光度法 |
(Paraformaldehyde for industrial use; Methods of test; Part 3 : Determination of iron content; 2,2`- Bipyridyl photometric method) |
| ISO 1391-4-1976 |
工業用仲甲醛.試驗方法.第4部分:水不溶物含量的測定 |
(Paraformaldehyde for industrial use; Methods of test; Part 4 : Determination of water-insoluble matter) |
| ISO 1391-5-1981 |
工業用多聚甲醛.試驗方法.醛含量的測定.滴定法 |
(Paraformaldehyde for industrial use; methods of test; determination of aldehyde content; titrimetric method) |
| ISO 13916-1996 |
焊接.預熱溫度、層間溫度和預加熱的維持溫度測量的導則 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature) |
| ISO 13918-1998 |
焊接.弧螺栓焊接用螺栓和水泥箍 |
(Welding - Studs and ceramic ferrules for arc stud welding) |
| ISO 13919-1-1996 |
焊接.電子和激光射線焊接接頭.缺陷的質量級別導則.第1部分:鋼 |
(Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel) |
| ISO 13919-2-2001 |
焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 |
(Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys) |
| ISO 1392-1977 |
結晶點的測定.一般方法 |
(Determination of crystallizing point; General method) |
| ISO 13920-1996 |
焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position) |
| ISO 13921-1996 |
航空.內部偏頸十字形帶螺紋或不帶螺紋的、標準的、短的或中等長度MJ螺紋、金屬材料涂覆或沒有涂覆的、強度 |
(Aerospace - Screws, 100 reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| ISO 13924-2000 |
塑料管和配件.聚乙烯/金屬過渡配件、聚乙烯攻絲三通管和聚乙烯支管管托的彎曲拉力循環試驗 |
(Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles) |
| ISO 13926-1-1998 |
針頭系列.第1部分:醫用注射器針頭用玻璃圓柱體 |
(Pen systems - Part 1: Glass cylinders for pen-injectors for medical use) |
| ISO 13926-1-2004 |
針頭系列.第1部分:醫用針頭注射器用玻璃套筒 |
|
| ISO 13926-2-1999 |
針頭系列.第2部分:醫用注射器針頭用圓盤和柱基 |
(Pen systems - Part 2: Plungers and discs for pen-injectors for medical use) |
| ISO 13927-2001 |
塑料.用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector) |
| ISO 13929-2001 |
小型船舶.操舵裝置.一般鏈接系統 |
(Small craft - Steering gear - General link systems) |
| ISO 1393-1977 |
工業用液態鹵代烴.酸度的測定.滴定法 |
(Liquid halogenated hydrocarbons for industrial use; Determination of acidity; Titrimetric method) |
| ISO 13930-1998 |
鐵礦石.低溫還原分解的動態試驗 |
(Iron ores - Dynamic test for low-temperature reduction-disintegration) |
| ISO 13934-1-1999 |
紡織材料.織物拉伸特性.第1部分:用條形方法對最大作用力和在最大作用力下延伸的測定 |
(Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method) |
| ISO 13934-2-1999 |
紡織材料.織物拉伸特性.第2部分:用夾鉗方法對最大作用力的測定 |
(Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method) |
| ISO 13935-1-1999 |
紡織材料.織物和成衣接縫拉伸特性.用剝離方法對接縫裂開最大拉力的測定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method) |
| ISO 13935-2-1999 |
紡織材料.織物和成衣接縫拉伸特性.用夾鉗方法對接縫裂開最大拉力的測定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method) |
| ISO 13936-1-2004 |
紡織品.機織物中縫合處紗線的抗滑脫性測定.第1部分:固定縫開口法 |
|
| ISO 13936-2-2004 |
紡織品.機織物中縫合處紗線的抗滑脫性測定.第2部分:固定荷載法 |
|
| ISO 13937-1 Technical Corrigendum 1-2004 |
紡織品.織物撕破特性.第1部分:用沖擊擺錘方法測定撕破強力(埃爾門多夫).技術勘誤1 |
|
| ISO 13937-1-2000 |
紡織材料.織物撕裂特性.第1部分:用沖擊擺方法測定撕裂力(埃爾門多夫) |
(Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)) |
| ISO 13937-2-2000 |
紡織材料.織物撕裂特性.第2部分:褲形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)) |
| ISO 13937-3-2000 |
紡織材料.織物撕裂特性.第3部分:翼形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)) |
| ISO 13937-4-2000 |
紡織材料.織物撕裂特性.第4部分:舌形試樣撕裂力的測定(雙撕裂法) |
(Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)) |
| ISO 13938-1-1999 |
織物.纖維破碎特性.第1部分:破碎強度和破碎膨脹測定的液壓方法 |
(Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension) |
| ISO 13938-2-1999 |
織物.纖維破碎特性.第1部分:破碎強度和破碎膨脹測定的氣壓方法 |
(Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension) |
| ISO 1394-1977 |
工業用液態鹵代烴.濁點的測定 |
(Liquid halogenated hydrocarbons for industrial use; Determination of cloud point) |
| ISO 13942-2000 |
粘合磨料.極限偏差和跳動公差 |
(Bonded abrasive products - Limit deviations and run-out tolerances) |
| ISO 13943-2000 |
防火安全.詞匯 |
(Fire safety - Vocabulary) |
| ISO 13944-1996 |
潤滑金屬粉末混合物.潤滑物含量測定.改良的索格利特(提取器)萃取法 |
(Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method) |
| ISO 13948-1-2000 |
柴油發動機.燃料噴射管和燃料噴射器低壓連接.第1部分:螺紋連接 |
(Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections) |
| ISO 13948-2-2000 |
柴油發動機.燃料噴射管和燃料噴射器低壓連接件.第2部分:無螺紋(推動)連接件 |
(Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections) |
| ISO 1395 AMD 1-1982 |
第1次修改 |
(Short pitch transmission precision bush chains and chain wheels; amendment 1) |
| ISO 1395-1977 |
短節距傳動的精密套筒鏈和鏈輪 |
(Short pitch transmission precision bush chains and chain wheels) |
| ISO 13951-2001 |
塑料管道系統.聚烯烴管道及管道配件對拉伸負載耐性的試驗方法 |
(Plastics piping systems - Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading) |
| ISO 13953-2001 |
聚乙烯管和配件.從對焊接頭測定抗拉強度和試樣的斷裂形式 |
(Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint) |
| ISO 13954-1997 |
塑料管和配件.額定外徑大于或等于90mm的聚乙烯(PE)電熔組件的剝離內散試驗 |
(Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm) |
| ISO 13955-1997 |
塑料管和配件.聚乙烯(PE)電熔組件的壓碎內散試驗 |
(Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies) |
| ISO 13957-1997 |
塑料管和配件.聚乙烯(PE)敲擊T.抗沖擊試驗方法 |
(Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance) |
| ISO 13958-2002 |
血液透析和相關治療的濃縮物 |
(Concentrates for haemodialysis and related therapies) |
| ISO 13959-2002 |
血液透析用水和有關療法 |
(Water for haemodialysis and related therapies) |
| ISO 13960-2003 |
心血管植入物與人造器官.血漿過濾器 |
(Cardiovascular implants and artificial organs - Plasmafilters ) |
| ISO 13960-2003 |
心血管植入物與人造器官.血漿過濾器 |
|
| ISO 13964-1998 |
空氣質量.環境空氣中臭氧含量測定.紫外線光度計法 |
(Air quality - Determination of ozone in ambient air - Ultraviolet photometric method) |
| ISO 13965-1998 |
肉和肉制品.淀粉和葡萄糖的測定.酶催化方法 |
(Meat and meat products - Determination of starch and glucose contents - Enzymatic method) |
| ISO 13966-1998 |
熱塑管和配件.標準環硬挺度 |
(Thermoplastics pipes and fittings - Nominal ring stiffnesses) |
| ISO 13967-1998 |
熱塑配件.環硬挺度的測定 |
(Thermoplastics fittings - Determination of ring stiffness) |
| ISO 13968-1997 |
塑料管道及導管系統.熱塑性塑料管.環狀物揉韌性的測定 |
(Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility) |
| ISO 13969-2003 |
乳及乳制品.微生物抑制劑試驗的標準化描述指南 |
(Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests) |
| ISO 13969-2003 |
乳及乳制品.微生物抑制劑試驗的標準化描述指南 |
|
| ISO 13984-1999 |
液壓.道路車輛燃油系統界面 |
(Liquid hydrogen - Land vehicle fuelling system interface) |
| ISO 13990-1996 |
紡織機械及附件.針織機用導紗器.詞匯 |
(Textile machinery and accessories - Yarn feeders for knitting machines - Vocabulary) |
| ISO 13992 AMD 1-2004 |
高山滑雪板裝配.安全要求和試驗方法.修改件1 |
|
| ISO 13992-1997 |
高山滑雪板.裝配.安全要求和試驗方法 |
(Alpine touring ski-bindings - Safety requirements and test methods) |
| ISO 13993-2001 |
滑雪設備租賃商店實施規范.租賃設施中完整和不完整高山滑雪裝配靴的取樣和檢驗 |
(Rental ski shop practice - Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications) |
| ISO 13994-1998 |
對液體化合物的防護服裝.防護服裝材料在壓力下防液體滲透的阻力測定 |
(Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure) |
| ISO 13995-2000 |
防護服.機械特性.材料抗動力撕扯和穿刺性的試驗方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| ISO 13996-1999 |
防護服.機械性能.刺穿阻力的測定 |
(Protective clothing - Mechanical properties - Determination of resistance to puncture) |
| ISO 13997-1999 |
防護服.機械特性.抗尖銳物切割特性的測定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
| ISO 13998-2003 |
防護服.防小折刀切割和刺穿的圍裙、褲子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives) |
| ISO 13998-2003 |
防護服.防小折刀切割和刺穿的圍裙、褲子和背心 |
|
| ISO 13999-1-1999 |
防護服裝.防止刀切傷和割傷的手套和胳膊護套.第1部分:鏈郵遞手套和胳膊護套 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain-mail gloves and arm guards) |
| ISO 13999-2-2003 |
防護服.防止刀割傷和刺傷用的手套和手臂護套.第3部分:不包括鏈環在內的材料制手套和手臂護套 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail) |
| ISO 13999-2-2003 |
防護服.防止刀割傷和刺傷用的手套和手臂護套.第3部分:不包括鏈環在內的材料制手套和手臂護套 |
|
| ISO 13999-3-2002 |
防護服.防止被手持刀具割傷和刺傷用的手套和手臂保護物.第3部分:編織物,皮革和其它編織材料的沖擊切割試驗 |
(Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials) |
| ISO 14-1982 |
內定心的直邊花鍵軸.尺寸,公差和檢驗 |
(Straight-sided splines for cylindrical shafts with internal centering; Dimensions, tolerances and verification) |
| ISO 140-1 AMD 1-2004 |
聲學.建筑物和建筑構件的隔聲測量.第1部分:能抑制側向傳聲的實驗室試驗裝置的要求.修改件1: 輕型雙葉隔板用開度測試框架的特殊要求 |
|
| ISO 140-1-1997 |
聲學.建筑物和建筑構件的隔音測量.第1部分:抑制側向傳輸?shù)膶?shí)驗室試驗裝置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission) |
| ISO 140-10-1991 |
聲學.建筑物和建筑構件的隔音測量.第10部分:小型建筑物構件空氣隔音的實驗室測量 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 10: laboratory measurement of airborne sound insulation of small building elements) |
| ISO 140-12-2000 |
聲學.建筑物和建筑部件隔音測量.第12部分:通道地板的房間對房間氣載和沖擊聲音隔絕的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor) |
| ISO 140-14-2004 |
聲學.建筑物和建筑構件的隔聲測量.第14部分:試驗場中特殊情況指南 |
|
| ISO 140-2 Technical Corrigendum 1-1993 |
聲學.建筑物和建筑構件的隔音測量.第2部分:精度數據的測定.檢驗和應用.技術勘誤1-9 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data; technical corrigendum 1) |
| ISO 140-2-1991 |
聲學.建筑物和建筑構件的隔音測量.第2部分:精確數據的確定.驗證和應用 |
(Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data) |
| ISO 140-3 AMD 1-2004 |
聲學.建筑物和建筑構件的隔聲測量.第3部分:建筑構件空氣聲隔聲的實驗室測量.修改件1:輕型雙葉隔板的安裝指南 |
|
| ISO 140-3-1995 |
聲學.建筑物和建筑構件的隔音測量.第3部分:建筑物構件的氣載音響隔離的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements) |
| ISO 140-4-1998 |
聲學.建筑物和建筑構件的隔音測量.第4部分:房間之間氣載聲音隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms) |
| ISO 140-5-1998 |
聲學.建筑物和建筑構件的隔音測量.第5部分:正面構件和正面的氣載聲音隔絕的現場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of fa嘺de elements and fa嘺des) |
| ISO 140-6-1998 |
聲學.建筑物和建筑構件的隔音測量.第6部分:地板沖擊聲隔絕的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors) |
| ISO 140-7-1998 |
聲學.建筑物和建筑構件的隔音測量.第7部分:地板沖擊聲隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com