標準號 |
中文名稱 |
英文名稱 |
| ISO 12678-2-1996 |
耐火制品.耐火磚的尺寸測量與外部缺陷.第2部分:轉角和邊緣存在的缺陷及其它表面不完備性 |
(Refractory products - Measurement of dimensions and external defects of refractory bricks - Part 2: Corner and edge defects and other surface imperfections) |
| ISO 1268-1-2001 |
纖維增強塑料.試驗板的制備方法.第1部分:通用條件 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions) |
| ISO 1268-1974 |
塑料.試驗用強化的樹脂粘合和低壓層壓的板材或板條的玻璃纖維制備 |
(Plastics; Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes) |
| ISO 1268-2-2001 |
纖維增強塑料.試驗用板材的生產方法.第2部分:接觸模壓法和噴射成形法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding) |
| ISO 1268-3-2000 |
纖維增強塑料.試驗板的生產方法.第3部分:濕壓縮模塑法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding) |
| ISO 1268-5-2001 |
纖維增強塑料.試驗用板材的生產方法.第5部分:長纖維卷繞法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding) |
| ISO 1268-6-2002 |
纖維增強塑料.試驗用板材的生產方法.第6部分:Pultrusion 鑄造品 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding) |
| ISO 1268-7-2001 |
纖維增強塑料.試驗用板材的生產方法.第7部分:樹脂壓鑄法 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding) |
| ISO 1268-8-2004 |
纖維增強塑料.試驗板的制備方法.第8部分:SMC和BMC的壓縮模制 |
|
| ISO 1268-9-2003 |
纖維增強塑料.試驗板的制備方法.第9部分:GMT/STC模制 |
(Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC) |
| ISO 1268-9-2003 |
纖維增強塑料.試驗板的制備方法.第9部分:GMT/STC模制 |
|
| ISO 12683-2004 |
機械鍍鋅涂層.規范和試驗方法 |
|
| ISO 12686-1999 |
金屬和其他無機覆層.鎳、自催化鎳或鉻鍍敷或精整加工前用金屬物質的自動控制噴丸處理 |
(Metallic and other inorganic coatings - Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish) |
| ISO 12687-1996 |
金屬覆層.孔隙率試驗.濕硫(硫華)試驗 |
(Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test) |
| ISO 127-1995 |
橡膠,天然膠乳濃縮物.氫氧化鉀值的測定 |
(Rubber, natural latex concentrate - Determination of KOH number) |
| ISO 12706-2000 |
無損檢驗.術語.用于滲透試驗的術語 |
(Non destructive testing - Terminology - Terms used in penetrant testing) |
| ISO 1271-1983 |
香精油.羰基值的測定 |
(Essential oils; Determination of carbonyl value; Free hydroxylamine method) |
| ISO 12710-2002 |
無損檢驗.超聲檢測.評估超聲試驗儀器的電子特性 |
(Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments) |
| ISO 12713-1998 |
無損檢驗.聲音傳播檢查.傳感器的第一次校正 |
(Non-destructive testing - Acoustic emission inspection - Primary calibration of transducers) |
| ISO 12714-1999 |
非損試驗.聲音發散的檢驗.聲音發散敏感器的二級校正 |
(Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors) |
| ISO 12715-1999 |
超聲非損試驗.接觸搜索超聲束截面特性的試驗過程和參考信息組 |
(Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles) |
| ISO 12716-2001 |
無損檢驗.聲音發散檢驗.詞匯 |
(Non-destructive testing - Acoustics emission inspection - Vocabulary) |
| ISO 1272-2000 |
香精油.酚類含量的測定 |
(Essential oils - Determination of content of phenols) |
| ISO 12721-2000 |
無損試驗.熱中子放射性試驗.射線束L/D比率的測定 |
(Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio) |
| ISO 12725-1997 |
鎳和鎳合金鑄件 |
(Nickel and nickel alloy castings) |
| ISO 12737-1996 |
金屬材料.平面變形斷裂韌性的測定 |
(Metallic materials - Determination of the plane-strain fracture toughness) |
| ISO 12739-1997 |
硫化鋅濃度.鋅含量的測定.離子交換/EDTA滴定法 |
(Zinc sulfide concentrates - Determination of zinc content - Ion-exchange/EDTA titrimetric method) |
| ISO 12740-1998 |
硫化鉛濃縮物.銀和金含量的測定.使用鉛析法和灰皿試金法的火焰試金和火焰原子吸收分光光度法 |
(Lead sulfide concentrates - Determination of silver and gold contents - Fire assay and flame atomic absorption spectrometric method using scorification or cupellation) |
| ISO 12742-2000 |
銅、鉛和鋅硫化物濃縮物.可傳送的濕度范圍的測定.流度臺法 |
(Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow table method) |
| ISO 12743-1998 |
銅,鉛和鋅硫化濃縮物.金屬和濕度含量測定的抽樣程序 |
(Copper, lead and zinc sulfide concentrates - Sampling procedures for determination of metal and moisture content) |
| ISO 12744-1997 |
銅,鉛和鋅硫化濃縮物.取樣精確性檢驗用實驗性方法 |
(Copper, lead and zinc sulfide concentrates - Experimental methods for checking the precision of sampling) |
| ISO 12745-1996 |
銅、鉛和鋅礦石及濃縮物.質量測量技術的精度和偏差 |
(Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques) |
| ISO 1275-1995 |
傳動和輸送機用雙節距的精密輥鏈和鏈輪 |
(Double-pitch precision roller chains and sprockets for transmission and conveyors) |
| ISO 12753-1-1999 |
繪圖圓規.第1部分:命名、圖例和等效術語 |
(Compasses - Part 1: Nomenclature, illustrations and equivalent terms) |
| ISO 12753-2-1999 |
繪圖圓規.第2部分:要求、名稱與符號和作標記 |
(Compasses - Part 2: Requirements, designation and marking) |
| ISO 12756-1998 |
繪圖與書寫儀器.圓珠筆和簽字筆.詞匯 |
(Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary) |
| ISO 12757-1-1998 |
園珠筆及其筆芯.第1部分:一般應用 |
(Ball point pens and refills - Part 1: General use) |
| ISO 12757-2-1998 |
圓珠筆和筆芯.第2部分:文件用途 |
(Ball point pens and refills - Part 2: Documentary use (DOC)) |
| ISO 12771-1997 |
塑料實驗室器皿.可處置血清移液管 |
(Plastics laboratory ware - Disposable serological pipettes) |
| ISO 12772-1997 |
實驗室玻璃器皿.可處置微血球容量計毛細管 |
(Laboratory glassware - Disposable microhaematocrit capillary tubes) |
| ISO 12775-1997 |
額定散裝玻璃產品的復合材料及其試驗方法導則 |
(Guidelines on types of glass of normal bulk-production composition and their test methods) |
| ISO 12777-1-1994 |
托盤連接件的檢驗方法.第1部分:托盤用釘子,其它榫釘型緊固件和U形釘?shù)目箯澢臏y定 |
(Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples) |
| ISO 12777-2-2000 |
托盤連接件的試驗方法.第2部分:托盤用釘子和U形釘?shù)目估Φ臏y定 |
(Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples) |
| ISO 12777-3-2002 |
托盤連接件的檢驗方法.第3部分:托盤連接件的強度測定 |
(Methods of test for pallet joints - Part 3: Determination of strength of pallet joints) |
| ISO 12789-2000 |
標準中子射線.模擬工作地點中子場產生的特性和方法 |
(Reference neutron radiations - Characteristics and methods of production of simulated workplace neutron fields) |
| ISO 1279-1996 |
香精油.利用氯化羥銨電勢法對羰基值的測定 |
(Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride) |
| ISO 12790-1-2001 |
輻射防護.放射生物測定的性能標準.第1部分:一般原則 |
(Radiation protection - Performance criteria for radiobioassay - Part 1: General principles) |
| ISO 12794-2000 |
核能.輻射防護.四肢和眼用單獨熱致發光劑量計 |
(Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes) |
| ISO 12795-2004 |
核燃料技術.二氧化鈾粉末和小球.帶雜質修正的重量分析法測定鈾和氧/鈾比率 |
|
| ISO 128-1-2003 |
技術圖紙.圖形表示的一般原則.第1部分:前言和索引 |
(Technical drawings - General principles of presentation - Part 1: Introduction and index) |
| ISO 128-1-2003 |
技術圖紙.圖形表示的一般原則.第1部分:前言和索引 |
|
| ISO 128-20-1996 |
技術制圖.畫法的一般原則.第20部分:圖線的基本規定 |
(Technical drawings - General principles of presentation - Part 20: Basic conventions for lines) |
| ISO 128-21-1997 |
技術制圖.畫法的一般原則.第21部分:計算機輔助設計(CAD)系統用圖線的表示 |
(Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems) |
| ISO 128-22-1999 |
技術制圖.展示的一般規則.第22部分:標題線和參考線的慣例和應用 |
(Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines) |
| ISO 128-23-1999 |
技術制圖.繪制的一般原理.第23部分:結構繪圖線 |
(Technical drawings - General principles of presentation - Part 23: Lines on construction drawings) |
| ISO 128-24-1999 |
技術制圖.展示的一般規則.第24部分:機械工程制圖線 |
(Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings) |
| ISO 128-25-1999 |
技術制圖.表示的一般原則.第25部分:造船繪圖線 |
(Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings) |
| ISO 128-30-2001 |
技術制圖.畫法的一般原則.第30部分:視圖的基本慣例 |
(Technical drawings - General principles of presentation - Part 30: Basic conventions for views) |
| ISO 128-34-2001 |
技術制圖.畫法的一般原則.第34部分:機械工程圖的視圖 |
(Technical drawings - General principles of presentation - Part 34: Views on mechanical engineering drawings) |
| ISO 128-40-2001 |
技術制圖.畫法的一般原則.第40部分:切面和截面的一般換算 |
(Technical drawings - General principles of presentation - Part 40: Basic conventions for cuts and sections) |
| ISO 128-44-2001 |
技術制圖.畫法的一般原則.第44部分:機械工程繪圖部分 |
(Technical drawings - General principles of presentation - Part 44: Sections on mechanical engineering drawings) |
| ISO 128-50-2001 |
技術制圖.畫法的一般原則.第50部分:切圖和分圖的表示區域的基本慣例 |
Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections |
| ISO 12800-2003 |
核燃料技術.氧化鈾粉末比表面積的BET測量方法指南 |
(Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method) |
| ISO 12800-2003 |
核燃料技術.氧化鈾粉末比表面積的BET測量方法指南 |
|
| ISO 12803-1997 |
測定钚濃縮物用硝酸钚溶液樣品表示方法 |
(Representative sampling of plutonium nitrate solutions for determination of plutonium concentration) |
| ISO 12807-1996 |
放射性材料的安全運輸.包裝件的泄漏試驗 |
(Safe transport of radioactive materials - Leakage testing on packages) |
| ISO 12819 Technical Corrigendum 1-1999 |
電池動力表電池壽命的評估方法.技術勘誤1 |
(Method of evaluation of the battery life of a battery-powered watch; Technical Corrigendum 1) |
| ISO 12819-1999 |
電池動力表電池壽命的評估方法 |
(Method of evaluation of the battery life of a battery-powered watch) |
| ISO 12844-1999 |
未加工的光學玻璃.金剛石薄片的可磨性.試驗方法和分類 |
Raw optical glass - Grindability with diamond pellets - Test method and classification |
| ISO 12853-1997 |
光學和光學儀器.顯微鏡.用戶信息提供 |
Optics and optical instruments - Microscopes - Information provided to the user |
| ISO 12858-1-1999 |
光學和光學設備.大地測量設備的輔助裝置.第1部分:不便鋼水平支柱 |
Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs |
| ISO 12858-2-1999 |
光學和光學設備.大地測量設備的輔助裝置.第2部分:三角架 |
Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods |
| ISO 12864-1997 |
眼科光學.接觸透鏡.散光的測定 |
Ophthalmic optics - Contact lenses - Determination of scattered light |
| ISO 12865-1998 |
眼科儀器.檢眼鏡 |
Ophthalmic instruments - Retinoscopes |
| ISO 12866-1999 |
眼科設備.視野鏡 |
Ophthalmic instruments - Perimeters |
| ISO 12867-1998 |
眼科儀器.試驗框架 |
Ophthalmic instruments - Trial frames |
| ISO 12870-1997 |
眼鏡科學.眼鏡鏡.一般要求和試驗方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods |
| ISO 12870-2004 |
眼科光學.眼鏡鏡架.要求和試驗方法 |
|
| ISO 12870-2004 |
眼科光學.眼鏡鏡架.要求和試驗方法 |
|
| ISO 12884-2000 |
環境空氣.總(氣相和粒子相)多環芳香烴的測定.用氣相色譜法或質譜分析法收集過濾器背上的吸附劑 |
Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses |
| ISO 12890-1999 |
水質.對淡水魚的胚胎和幼體毒性的測定 |
Water quality - Determination of toxicity to embryos and larvae of freshwater fish - Semi-static method |
| ISO 12891-1-1998 |
外科植入物的分析和修補.第1部分:修補和處理 |
Retrieval and analysis of surgical implants - Part 1: Retrieval and handling |
| ISO 12891-2-2000 |
外科植入物的分析和收回.第2部分:收回的金屬外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 2: Analysis of retrieved metallic surgical implants |
| ISO 12891-3-2000 |
外科植入物的分析和收回.第3部分:收回的聚合的外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 3: Analysis of retrieved polymeric surgical implants |
| ISO 12891-4-2000 |
外科植入物的分析和收回.第3部分:收回的陶瓷的外科植入物的分析 |
Retrieval and analysis of surgical implants - Part 4: Analysis of retrieved ceramic surgical implants |
| ISO 12894-2001 |
熱環境人類工效學.暴露于極熱和冷環境中的人的醫學檢驗 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments |
| ISO 129-1-2004 |
技術繪圖.尺寸和公差的表示.第1部分:一般準則 |
|
| ISO 129-1985 |
技術制圖.尺寸.一般原則、定義、標注方法和特殊畫法 |
Technical drawings; Dimensioning; General principles, definitions, methods of execution and special indications |
| ISO 12900-1997 |
硬度煤.磨損性的測定 |
Hard coal - Determination of abrasiveness |
| ISO 12917-1-2002 |
石油和液化石油產品.臥式圓形油罐的校正.第1部分:手工法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manuel methods |
| ISO 12917-2-2002 |
石油和液態石油產品.臥式圓筒狀油罐的標定.第2部分:光電內測距法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method |
| ISO 12922 Technical Corrigendum 1-2001 |
潤滑劑、工業用油和有關產品(L級).H系列(液壓系統).HFAE、HFAS、HFB、HFC、HFDR和HFDU類規范.技術勘誤1 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1 |
| ISO 12922-1999 |
潤滑油、工業油及有關產品(L級).H系列(液壓系統).HFAE、HFAS、HFB、HFC、HFDR和HFDU類別規范 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 12925-1 Technical Corrigendum 1-2002 |
潤滑劑、工業用油和相關產品(L類).(齒輪)C種.第1部分:密封齒輪系統用潤滑劑.技術勘誤1 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
| ISO 12925-1-1996 |
潤滑劑、工業用油及有關(L類)產品.(齒輪)C種.第1部分:密封齒輪系統用潤滑劑規范 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 12937-2000 |
石油產品.水含量測定.庫侖卡耳.費歇爾滴定法 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method |
| ISO 12944-1-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第1部分:一般性介紹 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction |
| ISO 12944-2-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第2部分:環境分類 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments |
| ISO 12944-3-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第3部分:設計上的考慮 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations |
| ISO 12944-4-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第4部分:表面類型和表面處理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation |
| ISO 12944-5-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第5部分:防護漆系統 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems |
| ISO 12944-6-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第6部分:實驗室性能試驗方法 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods |
| ISO 12944-7-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第7部分:涂漆工藝的實施和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work |
| ISO 12944-8-1998 |
涂料和清漆.防護漆系統對鋼結構的腐蝕防護.第8部分:新工藝和維修規范的開發 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance |
| ISO 12945-1-2000 |
紡織品.測定織物表面起毛和起球的傾向.第1部分:起球箱法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method |
| ISO 12945-2-2000 |
紡織材料.測定織物表面起毛和起球的特性.第2部分:改良的起毛起球試驗法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method |
| ISO 12947-1 Technical Corrigendum 1-2002 |
紡織品.用馬丁代爾(Martinadale)法對織物抗磨損性的測定.第1部分:馬丁代爾耐磨試驗儀.技術勘誤1 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus; Technical Corrigendum 1 |
| ISO 12947-1-1998 |
織物.Martinadale法對纖維磨損抗性的測定.第1部分:磨損試驗裝置 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
| ISO 12947-2 Technical Corrigendum 1-2002 |
紡織品.用馬丁代爾(Martinadale)法對織物抗磨損性的測定.第2部分:試樣破損的測定.技術勘誤1 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown; Technical Corrigendum 1) |
| ISO 12947-2-1998 |
紡織品.馬丁代爾法測定織物耐磨性.第2部分:樣品破損的測定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown) |
| ISO 12947-3 Technical Corrigendum 1-2002 |
紡織品.用馬丁代爾(Martinadale)法對織物抗磨損性的測定.第3部分:質量損失的測定.技術勘誤1 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss; Technical Corrigendum 1) |
| ISO 12947-3-1998 |
織物.Martinadale法對纖維磨損抗性的測定.第3部分:重量損失的測定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss) |
| ISO 12947-4 Technical Corrigendum 1-2002 |
紡織品.用馬丁代爾(Martinadale)法對織物抗磨損性的測定.第4部分:外觀變化的評定.技術勘誤1 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change; Technical Corrigendum 1 |
| ISO 12947-4-1998 |
織物.Martinadale法對纖維磨損抗性的測定.第4部分:表面變化的評估 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change |
| ISO 12951-1999 |
鋪地織物.用Lisson試驗對質量損失的測定 |
Textile floor coverings - Determination of mass loss using the Lisson test |
| ISO 12952-1-1998 |
紡織品.床上用品的燃燒性能.第1部分:由隱燃香煙引起的可燃性的一般試驗方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette |
| ISO 12952-2-1998 |
織物.床上用品的燃燒性能.第2部分:由隱燃香煙引起的可燃性的特殊試驗方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette |
| ISO 12952-3-1998 |
織物.床上用品的燃燒性能.第3部分:由一小團明火引起的可燃性的一般試驗方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame |
| ISO 12952-4-1998 |
織物.床上用品的燃燒性能.第4部分:由一小團明火引起的可燃性的特殊試驗方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame |
| ISO 12956-1999 |
土工和土工相關產品.特性化開口尺寸的測定 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com