標準號 |
中文名稱 |
英文名稱 |
| ISO 6969-1999 |
道路車輛.音響信號裝置.車輛裝配后的試驗 |
Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
| ISO 6969-2004 |
道路車輛.音響信號裝置.裝車后的試驗 |
|
| ISO 697-1981 |
表面活性劑.洗滌粉.表觀密度的測定.一定容積的質量測定法 |
Surface active agents; Washing powders; Determination of apparent density; Method by measuring the mass of a given volume |
| ISO 6970-1994 |
機動腳踏車和機動腳踏兩用車的污染試驗.框架測力計 |
Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench |
| ISO 6971-2002 |
焊接結構拉曳用彎板鏈、附件和鏈輪 |
Cranked-link drag chains of welded construction, attachments and sprockets |
| ISO 6972-2002 |
焊接結構工程用彎板鏈、附件和鏈輪 |
Cranked-link mill chains of welded construction, attachments and sprockets |
| ISO 6973-1986 |
輸送機用落錘鍛無鉚接鏈條 |
Drop-forged rivetless chains for conveyors |
| ISO 6974-1-2000 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第1部分:簡明分析導則 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis |
| ISO 6974-2-2001 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第2部分:測量系統特性和數據處理統計 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data |
| ISO 6974-3-2000 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第3部分:用兩填充柱測定氫、氦、氧、氮、二氧化碳和C以上烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C using two packed columns |
| ISO 6974-4-2000 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第4部分:用兩柱測定實驗室和聯機測量系統用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C to C and C hydrocarbons for a laboratory and on-line measuring system using two columns |
| ISO 6974-5-2000 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第5部分:用三柱測定實驗室和聯機處理用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C to C and C hydrocarbons for a laboratory and on-line process application using three columns |
| ISO 6974-6 Technical Corrigendum 1-2003 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第6部分:用三個毛細管柱測定氫、氦、氧、氮、二氧化碳和C1到 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns; Technical Corrigendum 1) |
| ISO 6974-6 Technical Corrigendum 1-2003 |
天然氣.用氣相色譜法測定規定了不確定度的組分.第6部分:用三個毛細管柱測定氫、氦、氧、氮、二氧化碳和C1到C8的烴類.技術勘誤1 |
|
| ISO 6974-6-2002 |
天然氣.用氣相色譜法測定規定的不確定度的組分.第6部分:用三個毛細管柱測定氫、氦、氧、氮、二氧化碳和C到C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C to C hydrocarbons using three capillary columns |
| ISO 6975-1997 |
天然氣.擴展分析.氣相色譜法 |
Natural gas - Extended analysis - Gas-chromatographic method |
| ISO 6976 Technical Corrigendum 2-1997 |
天然氣.熱值,密度,相對密度和成分的沃泊指數的計算.技術勘誤表2 |
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 2 |
| ISO 6976 Technical Corrigendum 3-1999 |
天然氣.成分的沃伯指數和相對密度,密度及熱值的計算.技術勘誤3 |
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3 |
| ISO 6977-1983 |
天燃?xì)?水和甲醇含量的測定.氣相色譜法 |
Natural gas; Determination of water and methanol contents; Gas chromatographic method |
| ISO 6978-1-2003 |
天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣 |
(Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine) |
| ISO 6978-1-2003 |
天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣 |
|
| ISO 6978-1-2003 |
天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣 |
|
| ISO 6978-1-2003 |
天然氣.汞的測定.第1部分:用碘化學吸附法對汞的采樣 |
|
| ISO 6978-1992 |
天燃?xì)?汞測定 |
Natural gas; determination of mercury |
| ISO 6978-2 Technical Corrigendum 1-2004 |
天然氣.汞的測定.第2部分:用金/鉑合金混汞法對汞的采樣.技術勘誤1 |
|
| ISO 6978-2-2003 |
天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣 |
(Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy) |
| ISO 6978-2-2003 |
天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣 |
|
| ISO 6978-2-2003 |
天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣 |
|
| ISO 6978-2-2003 |
天然氣.汞的測定.第2部分:用碘/鉑合金混汞法對汞的采樣 |
|
| ISO 6980-1996 |
校準劑量計和劑量強度計及測定充作為β輻射能量函數的靈敏度用的β標準放射源 |
Reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy |
| ISO 6980-2-2004 |
核能.參考β粒子輻射.第2部分:輻射場的基本數量特性的相關校正基礎 |
|
| ISO 6981-1992 |
液壓傳動.液壓缸.活塞桿端孔.裝配尺寸 |
Hydraulic fluid power; cylinders; rod end plain eyes; mounting dimensions |
| ISO 6982-1992 |
液壓傳動.液壓缸.活塞桿端球面環孔.裝配尺寸 |
Hydraulic fluid power; cylinders; rod end spherical eyes; mounting dimensions |
| ISO 6983-1-1982 |
機床的數字控制.程序格式和地址字碼的確定.第1部分:定位,移行和連續控制系統的數據格式 |
Numerical control of machines; Program format and definition of address words; Part 1 : Data format for positioning, line motion and contouring control systems |
| ISO 6984-1990 |
礦井提升用絞合鋼絲繩的非合金鋼絲.規范 |
Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
| ISO 6986-1983 |
有可轉位刀片的三面刃(開槽)銑刀.尺寸 |
Side and face milling (slotting) cutters with indexable inserts; Dimensions |
| ISO 6987-1998 |
有圓柱形固定孔和圓角的可轉位硬質合金刀片.尺寸 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions |
| ISO 6988-1985 |
金屬涂層和其它無機物涂層.在一般水分冷凝作用下的二氧化硫試驗 |
Metallic and other non organic coatings; Sulfur dioxide test with general condensation of moisture |
| ISO 6989-1981 |
紡織纖維.短纖維長度和長度分布的測定(用單纖維的測定) |
Textile fibres; Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| ISO 699-1982 |
紙漿.耐堿性的測定 |
Pulps; Determination of alkali resistance |
| ISO 6992-1986 |
供應飲水的未增塑聚氯乙烯(PVC-U)管.作為雜質出現的鎘和汞的可萃取性 |
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply; Extractability of cadmium and mercury occurring as impurities |
| ISO 6993-2001 |
輸送氣體燃料用埋設的、高耐沖擊的聚氯乙烯(PVC-HI)管道.規范 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels - Specification |
| ISO 6994-1986 |
鋁礦石.鋁含量的測定.乙二胺二乙酸(EDTA)滴定法 |
Aluminium ores; Determination of aluminium content; EDTA titrimetric method |
| ISO 6995-1985 |
鋁礦石.鈦含量的測定.4,4`二安替比林基代甲烷分光光度測定法 |
Aluminium ores; Determination of titanium content; 4,4`-Diantipyrylmethane spectrophotometric method |
| ISO 6997-1985 |
煉鋁用碳素材料.煅燒焦炭.表觀油含量的測定.加熱法 |
Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method |
| ISO 6998 Technical Corrigendum 1-1999 |
煉鋁用碳素材料.電極用瀝青.焦化值的測定.技術勘誤1 |
Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1 |
| ISO 6998-1997 |
煉鋁用碳素材料.電極用瀝青.焦化值的測定 |
Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value |
| ISO 6999-1983 |
煉鋁用碳素材料.電極用瀝青.密度的測定.測比重法 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method |
| ISO 7-1-1994 |
密封連接的管螺紋.第1部分:尺寸、公差與命名 |
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation |
| ISO 7-2-2000 |
螺紋密封連接的管螺紋.第2部分:用極限量規驗證 |
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges |
| ISO 70-1981 |
電影攝影.在35mm電影膠片上的35mm負片光學聲帶.位置和最大寬度尺寸 |
Cinematography; 35 mm negative photographic sound record on 35 mm motion-picture film; Position and maximum width dimensions |
| ISO 700-1982 |
運用于鎢極惰性氣體保護電弧焊(TIG)和涂藥焊條的手工金屬電弧焊接電源 |
Power sources for manual metal arc welding with covered electrodes and for the TIG process |
| ISO 7000-1989 |
設備用圖形符號.索引和一覽表.兩種語言版 |
Graphical symbols for use on equipment; index and synopsis |
| ISO 7000-2004 |
設備用圖形符號.索引和一覽表 |
|
| ISO 7000-2004 |
設備用圖形符號.索引和一覽表 |
|
| ISO 7001 AMD 1-1993 |
第1次修改 |
Public information symbols; amendment 1 |
| ISO 7001-1990 |
公共信息符號 |
Public information symbols |
| ISO 7002-1986 |
農產食品.從大量食品中標準取樣法的方案 |
Agricultural food products; Layout for a standard method of sampling from a lot |
| ISO 7004-2002 |
攝影技術.工業用射線照相膠片.置于X射線和γ射線下的膠片ISO感光度、ISO平均梯度和ISO梯度G2和64的測定 |
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and 64 when exposed to X- and gamma-radiation |
| ISO 7005-1-1992 |
金屬法蘭.第1部分:鋼法蘭 |
Metallic flanges; part 1: steel flanges |
| ISO 7005-2-1988 |
金屬法蘭.第2部分:鑄鐵法蘭 |
Metallic flanges; part 2: cast iron flanges |
| ISO 7005-3-1988 |
金屬法蘭.第3部分:銅合金和組合法蘭 |
Metallic flanges; part 3: copper alloy and composite flanges |
| ISO 7006-1981 |
木工機械.安裝圓鋸片的主軸直徑 |
Woodworking machines; Diameters of spindles for receiving circular sawblades |
| ISO 7007-1983 |
木工機械.臺式帶鋸機.專用術語和驗收條件 |
Woodworking machines; Table bandsawing machines; Nomenclature and acceptance conditions |
| ISO 7008-1983 |
木工機械.有或無移動平臺的單刃圓盤鋸機.專用術語和驗收條件 |
Woodworking machines; Single blade circular saw benches with or without travelling table; Nomenclature and acceptance conditions |
| ISO 7009-1983 |
木工機械.單軸造型機.專用術語和驗收條件 |
Woodworking machines; Single spindle moulding machines; Nomenclature and acceptance conditions |
| ISO 701-1998 |
國際齒輪表示法.幾何數據符號 |
International gear notation - Symbols for geometrical data |
| ISO 7010-2003 |
圖形符號.安全顏色和安全標志.用于工作地點及公共場所的安全標志 |
(Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas) |
| ISO 7010-2003 |
圖形符號.安全顏色和安全標志.用于工作地點及公共場所的安全標志 |
|
| ISO 702-1-2001 |
機床.主軸頭和卡盤的連接尺寸.第1部分:圓錐形連接 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection |
| ISO 702-2-1975 |
機床.主軸頭和卡盤.互換尺寸.第2部分:凸輪鎖緊型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 2: Camlock type |
| ISO 702-3-1975 |
機床.主軸頭和卡盤.互換尺寸.第3部分:卡口型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 3: bayonet type |
| ISO 702-3-1975 |
機床.主軸頭和卡盤.互換尺寸.第3部分:卡口型 |
Machine tools; spindle noses and face plates; sizes for interchangeability; part 3: bayonet type |
| ISO 702-4-2004 |
機床.主軸端部和工件夾盤的連接尺寸.第4部分:圓柱形連接 |
|
| ISO 702-4-2004 |
機床.主軸端部和工件夾盤的連接尺寸.第4部分:圓柱形連接 |
|
| ISO 7023-1983 |
包裝.包裝袋.試驗用空紙袋取樣法 |
Packaging; Sacks; Method of sampling empty sacks for testing |
| ISO 7026-1997 |
柴油發動機.S規格B類針式噴嘴的20、21、21.1和27型螺旋擰入式噴嘴架 |
Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size S, type B |
| ISO 7027-1999 |
水質.混濁度的測定 |
Water quality - Determination of turbidity |
| ISO 7029-2000 |
聲學.作為齡期函數的聽力閾的統計分布 |
Acoustics - Statistical distribution of hearing tresholds as a function of age |
| ISO 703-1-1999 |
傳送帶.橫向撓性和可成槽形性.第1部分:試驗方法 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method |
| ISO 7030-1987 |
道路車輛.12、13、14、15、16、17、18和19型螺旋擰入式噴嘴架 |
Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
| ISO 7033-1987 |
混凝土的細集料和粗集料.單位體積顆粒質量和吸水性的測定.比重瓶法 |
Fine and coarse aggregates for concrete; Determination of the particle mass-per-volume and water absorption; Pycnometer method |
| ISO 704-2000 |
術語工作.原則和方法 |
Terminology work - Principles and methods |
| ISO 7040-1997 |
1 型通用扭矩六角螺母(用非金屬墊圈).性能類別 5,8和10 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 |
| ISO 7041-2002 |
2 型長效扭矩六角螺母(用非金屬墊圈).性能類別 9和12 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 - Property classes 9 and 12 |
| ISO 7042-1997 |
2型,常用扭矩全金屬六角螺母.性能類別5,8,10和12 |
Prevailing torque type all-metal hexagon nuts, style 2 - Property classes 5, 8, 10 and 12 |
| ISO 7043-1997 |
經常作用的扭矩型帶法蘭的六角螺母(非金屬墊圈).產品等級A和B |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) - Product grades A and B |
| ISO 7044-1997 |
通用扭矩型全金屬帶法蘭螺母.產品等級A和B |
Prevailing torque type all-metal hexagon nuts with flange - Product grades A and B |
| ISO 7045-1994 |
帶H型或Z型十字槽的平圓頭螺釘.產品等級A |
Pan head screws with type H or type Z cross recess; product grade A |
| ISO 7046-1-1994 |
帶H型或Z型十字槽的平沉頭螺釘(通用頭).產品等級A.第1部分:強度等級4.8 |
Countersunk flat head screws (common head style) with type H or type Z cross recess; product grade A; part 1: steel of property class 4.8 |
| ISO 7046-2-1990 |
十字槽沉頭螺釘(普通頭型).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬 |
Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals |
| ISO 7047-1994 |
帶H型或Z型十字槽半圓頭沉頭螺釘.產品等級A |
Countersunk raised head screws (common head style) with type H or type Z cross recess; product grade A |
| ISO 7048-1998 |
十字槽平頭螺釘 |
Cross recessed cheese head screws |
| ISO 7049-1983 |
十字槽平圓頭自攻螺釘 |
Cross recessed pan head tapping screws |
| ISO 705-1994 |
橡膠膠乳.5℃-40℃間密度的測定 |
Rubber latex - Determination of density between 5 鳦 and 40 鳦 |
| ISO 7050-1983 |
十字槽沉頭自攻螺釘(普通頭型) |
Cross recessed countersunk (flat) head tapping screws (common head style) |
| ISO 7051-1983 |
十字槽半沉頭橢圓頭自攻螺釘 |
Cross recessed raised countersunk (oval) head tapping screws |
| ISO 7053-1992 |
六角墊圈頭自攻螺釘 |
Hexagon washer head tapping screws |
| ISO 7056-1981 |
實驗室塑料器皿.燒杯 |
Plastics laboratory ware; Beakers |
| ISO 7057-1981 |
實驗室塑料器皿.過濾漏斗 |
Plastics laboratory ware; Filter funnels |
| ISO 7058-1983 |
工業用磷酸.高溶性硫酸鹽含量的測定.還原后滴定法 |
Phosphoric acid for industrial use; Determination of higher soluble sulfate contents; Titrimetric method after reduction |
| ISO 7059-1982 |
工業用己內酰胺.在波長 290nm時吸收率的測定 |
Caprolactam for industrial use; Determination of absorbance at a wavelength of 290 nm |
| ISO 706-1985 |
橡膠膠乳.凝結物(篩余物)含量的測定 |
Rubber latex; Determination of coagulum content (sieve residue) |
| ISO 706-2004 |
橡膠膠乳.凝固物(篩余物)含量的測定 |
|
| ISO 7060-1982 |
工業用己內酰胺.結晶點的測定 |
Caprolactam for industrial use; Determination of crystallizing point |
| ISO 7061-1993 |
造船.海船的鋁質搭岸跳板 |
Shipbuilding; aluminium shore gangways for seagoing vessels |
| ISO 7063-1982 |
滾針軸承.滾道滾針型.公差 |
Needle roller bearings; Track rollers; Tolerances |
| ISO 7063-2003 |
滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差 |
|
| ISO 7064-1983 |
數據處理.檢驗符號系統 |
Data processing; Check character systems |
| ISO 7065-1-1985 |
信息處理.以限定的頻率13262次磁通變換/弧度和1.9次變換/mm(48次變換/in)在兩側調制錄制的200mm(8in)盒式軟磁盤的數據交換.第1部分:尺寸、物理和磁性特征 |
Information processing; Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 1 : Dimensional, physical and magnetic characteristics |
| ISO 7065-2-1985 |
信息處理.以限定的頻率13262次磁通變換/弧度和1.9次變換/mm(48次變換/in)在兩側調制錄制的200mm(8in)盒式軟磁盤的數據交換.第2部分:磁道排列格式 |
Information processing; Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 2 : Track format |
| ISO 7066-2-1988 |
流量測量裝置校準和使用的不確定度的評價.非線性校準關系 |
Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships |
| ISO 707-1997 |
奶乳和乳制品.取樣導則 |
Milk and milk products - Guidance on sampling |
| ISO 707-1997 |
奶乳和乳制品.取樣導則 |
Milk and milk products - Guidance on sampling |
| ISO 7072-1993 |
農業和林業拖拉機和機械.車軸銷和彈簧銷的尺寸和要求 |
Tractors and machinery for agriculture and forestry; linch pins and spring pins; dimensions and requirements |
| ISO 7077-1981 |
建筑物的測量方法.驗證尺寸符合的一般原則和步驟 |
Measuring methods for building; General principles and procedures for the verification of dimensional compliance |
| ISO 7078-1985 |
建筑結構.放線,測量和測繪程序.詞匯和指南.兩種語言版 |
Building construction; Procedures for setting out, measurement and surveying; Vocabulary and guidance notes Bilingual edition |
| ISO 7079-1981 |
莫氏錐柄和直柄的空心鉆 |
Core drills with parallel shanks and with Morse taper shanks |
| ISO 7083-1983 |
技術制圖.幾何形位公差的符號.比例和尺寸 |
Technical drawings; Symbols for geometrical tolerancing; Proportions and dimensions |
| ISO 7085-1999 |
表面淬火和回火的米制滾螺紋螺釘?shù)臋C(jī)械和性能要求 |
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com