標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 9222-1-1995 |
技術制圖.動密封應用.第1部分:簡化畫法 |
(Technical drawings - Seals for dynamic application - General simplified representation) |
| BS EN ISO 9222-2-1995 |
技術制圖.動力應用的密封裝置.簡化畫法詳解 |
(Technical drawings - Seals for dynamic application - Detailed simplified representation) |
| BS EN ISO 9237-1995 |
紡織品.纖維織物透氣性的測定 |
(Textiles - Determination of the permeability of fabrics to air) |
| BS EN ISO 9239-1-2002 |
著火試驗反應.地板覆蓋物上火焰的水平表面擴展.使用輻射熱源測定燃燒性能 |
(Reaction to fire tests - Horizontal surface spread of flame on floor-covering systems - Determination of the burning behaviour using a radiant heat source) |
| BS EN ISO 9241-1-1997 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第1部分:概述 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - General introduction) |
| BS EN ISO 9241-10-1996 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第10部分:對話原理 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Dialogue principles) |
| BS EN ISO 9241-11-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.使用指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Guidance on usability) |
| BS EN ISO 9241-12-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.信息表示法 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Presentation of information) |
| BS EN ISO 9241-13-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.用戶導則 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - User guidance) |
| BS EN ISO 9241-15-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.命令對話 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Command dialogues) |
| BS EN ISO 9241-16-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.直接控制對話 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Direct manipulation dialogues) |
| BS EN ISO 9241-17-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第17部分:表格填寫對話 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Form-filling dialogues) |
| BS EN ISO 9241-4-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.鍵盤要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Keyboard requirements) |
| BS EN ISO 9241-5-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.工作臺布置及位置要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Workstation layout and postural requirements) |
| BS EN ISO 9241-6-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.工作環境指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Guidance on the work environment) |
| BS EN ISO 9241-7-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.反射顯示的要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for display with reflections) |
| BS EN ISO 9241-8-1998 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.顯示色要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for displayed colours) |
| BS EN ISO 9241-9-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.非鍵盤輸入裝置的要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for non-keyboard input devices) |
| BS EN ISO 9251-1996 |
熱絕緣.材料的熱傳導條件和性能.詞匯 |
(Thermal insulation - Heat transfer - Conditions and properties of materials - Vocabulary) |
| BS EN ISO 9283-1998 |
操縱工業機器人.性能指標和有關試驗方法 |
(Manipulating industrial robots - Performance criteria and related test methods) |
| BS EN ISO 9288-1996 |
熱絕緣.散熱傳遞.物理的量值和定義 |
(Thermal insulation - Heat transfer by radiation - Physical quantities and definitions) |
| BS EN ISO 9289-1991 |
油料種子殘渣.游離殘留乙烷測定 |
(Oilseed residues - Determination of free residual hexane) |
| BS EN ISO 9300-1991 |
用文杜利臨界流量噴嘴測定氣體流量 |
(Measurement of gas flow by means of critical flow Venturi nozzles) |
| BS EN ISO 9308-1-2000 |
水質.表面水和廢水中大腸桿菌和大腸桿菌類細菌的檢測與計數.薄膜過濾法 |
(Water quality - Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water - Membrane filtration method) |
| BS EN ISO 9308-3-1999 |
水質.表面和廢水中大腸桿菌和大腸桿菌型細菌的計數和檢測.表面和廢水中大腸桿菌的計數和檢測的小型化方法( |
(Water quality - Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water - Miniaturized method (most probable number) for the detection and enumeration of E. coli) |
| BS EN ISO 9311-2-2002 |
熱塑性塑料管道系統用膠粘劑.剪切強度測定 |
(Adhesives for thermoplastic piping systems - Determination of shear strength) |
| BS EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.測定耐內壓力性的試驗方法 |
|
| BS EN ISO 9312-1995 |
電阻焊設備.電極擋塊的絕緣柱 |
(Resistance welding equipment - Insulated pins for use in electrode back-ups) |
| BS EN ISO 9337-2-2004 |
接觸鏡片.后頂點屈光度的測定.鹽水中浸泡的接觸鏡片的測量 |
|
| BS EN ISO 9338-1998 |
光學和光學儀器.接觸鏡片.直徑的測定 |
(Optics and optical instruments - Contact lenses - Determination of the diameters) |
| BS EN ISO 9339-1-1998 |
光學及光學儀器.接觸鏡片.厚度測定.直接接觸鏡片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Rigid contact lenses) |
| BS EN ISO 9339-2-1998 |
光學及光學儀器.接觸鏡片.厚度測定.水凝膠接觸鏡片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Hydrogel contact lenses) |
| BS EN ISO 9340-1999 |
光學及光學儀器.接觸鏡片.直接接觸鏡片的應力測定 |
(Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses) |
| BS EN ISO 9341-1998 |
光學和光學儀器.接觸鏡片.剛性接觸鏡片雜質和表面缺陷的測定 |
(Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses) |
| BS EN ISO 9342-1996 |
光學及光學儀器.焦距校正用檢驗透鏡 |
(Optics and optical instruments - Test lenses for calibration of focimeters) |
| BS EN ISO 9346-1996 |
熱絕緣.質量傳遞.物理量和定義 |
(Thermal insulation - Mass transfer - Physical quantities and definitions) |
| BS EN ISO 9360-1-2000 |
麻醉和呼吸設備.使人體呼吸氣體增濕的熱和潮氣交換(HMEs).與最小潮量250 ml一起使用的熱和潮氣交換 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with minimum tidal volumes of 250 ml) |
| BS EN ISO 9360-2-2002 |
麻醉和呼吸設備.使人體呼吸濕潤氣體用熱和潮氣交換器(HMEs).250ml最小量氣管造口病人用熱和潮氣交換器 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml) |
| BS EN ISO 9363-1-1999 |
光學和光學議器.接觸鏡片.接觸鏡片材料的細胞毒性的測定.瓊酯覆蓋試驗和生長抑制試驗 |
(Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Agar overlay test and growth inhibition test) |
| BS EN ISO 9377-2-2000 |
水質.烴油指數的測定.用溶劑萃取法和氣相色譜法 |
(Water quality - Determination of hydrocarbon oil index - Method using solvent extraction and gas chromatography) |
| BS EN ISO 9391-1995 |
水質.宏無脊椎生物的深水取樣.菌落定性和定量采樣設備的使用導則 |
(Water quality - Sampling in deep water for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers) |
| BS EN ISO 9394-1998 |
眼科光學.接觸鏡片和接觸鏡片護理產品.用兔眼睛研究目鏡法測定生物相溶性 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes) |
| BS EN ISO 9396-2001 |
塑料.酚醛樹脂.利用自動裝置測定在給定溫度下的膠凝時間 |
(Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus) |
| BS EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
(Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method) |
| BS EN ISO 9400-1996 |
鎳基合金.抗晶間腐蝕性的測定 |
(Nickel-based alloys - Determination of resistance to intergranular corrosion) |
| BS EN ISO 9408-1999 |
水質.含水介質中有機化合物最大需氧生物降解能力的評定.在封閉的呼吸器中測定需氧量 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer) |
| BS EN ISO 9409-1-1997 |
操作工業機器人.機械界面.板(A式) |
(Manipulating industrial robots - Mechanical interfaces - Plates (form A)) |
| BS EN ISO 9409-1-2004 |
操作型工業機器人.機械接口.板型 |
|
| BS EN ISO 9409-2-1997 |
操縱工業機器人.機械界面.軸(A式) |
(Manipulating industrial robots - Mechanical interfaces - Shafts (form A)) |
| BS EN ISO 9409-2-2004 |
操作型工業機器人.機械接口.軸 |
|
| BS EN ISO 9431-1999 |
建筑圖紙.圖和正文的間隔,圖紙上的標題欄 |
(Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets) |
| BS EN ISO 9439-2001 |
水質.水介質中有機化合物臨界需氧生物降解性的評估.二氧化碳評估試驗 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test) |
| BS EN ISO 945-1994 |
抵石墨顯微結構的表示方法 |
(Cast iron - Designation of microstructure of graphite) |
| BS EN ISO 9454-2-2001 |
軟釬焊劑.分類和要求.性能要求 |
(Soft soldering fluxes - Classification and requirements - Performance requirements) |
| BS EN ISO 9455-10-2001 |
軟釬焊劑的試驗方法.助熔劑功效試驗.焊料展開法 |
(Soft soldering fluxes - Test methods - Flux efficacy test, solder spread method) |
| BS EN ISO 9455-12-1994 |
軟釬焊劑.試驗方法.鋼管耐腐蝕試驗 |
(Soft soldering fluxes - Test methods - Steel tube corrosion test) |
| BS EN ISO 9455-13-2000 |
軟釬焊助熔劑.試驗方法.助熔劑飛濺量的測定 |
(Soft soldering fluxes - Test methods - Determination of flux spattering) |
| BS EN ISO 9455-15-2000 |
軟釬焊劑.試驗方法.銅腐蝕試驗 |
(Soft soldering fluxes - Test methods - Copper corrosion test) |
| BS EN ISO 9455-2-1996 |
軟釬焊劑.試驗方法.第2部分:不揮發物的測定.沸點計法 |
(Soft soldering fluxes - Test methods - Determination of non-volatile matter, ebulliometric method) |
| BS EN ISO 9455-3-1995 |
軟釬焊劑.試驗方法.酸值測定.電勢法和目測滴定法 |
(Soft soldering fluxes - Test methods - Determination of acid value, potentiometric and visual titration methods) |
| BS EN ISO 9455-6-1997 |
軟釬焊劑.試驗方法.第6部分:鹵化物(不包括氟化物)的含量測定 |
(Soft soldering fluxes - Test methods - Determination and detection of halide (excluding fluoride) content) |
| BS EN ISO 9455-9-1996 |
軟釬焊劑.試驗方法.第9部分:氨含量測定 |
(Soft soldering fluxes - Test methods - Determination of ammonia content) |
| BS EN ISO 9456-1992 |
光學和光學儀器.眼科光學.眼鏡架標志 |
(Optics and optical instruments - Opthalmic optics - Marking of spectacle frames) |
| BS EN ISO 9488-2000 |
太陽能.詞匯 |
(Solar energy - Vocabulary) |
| BS EN ISO 9509-1990 |
水質.通過化學藥品和污水對活性污泥中微生物硝酸化抑制作用的鑒定方法 |
(Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water) |
| BS EN ISO 9513-2002 |
金屬材料.單軸向試驗用引伸計的校準 |
Metallic materials - Calibration of extensometers used in uniaxial testing |
| BS EN ISO 9514-1993 |
色漆和清漆.液態適用期測定.樣品的制備和狀態調節以及試驗指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing |
| BS EN ISO 9514-2005 |
色漆和清漆.多組分涂覆系統適用期測定.樣品的制備和處理以及試驗指南 |
|
| BS EN ISO 9554-2005 |
纖維繩索.一般規范 |
|
| BS EN ISO 9556-2001 |
鋼鐵.含碳總量的測定.感應電爐燃燒紅外線吸收法 |
(Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace) |
| BS EN ISO 9562-2004 |
水質.可吸附鹵素(AOX)的測定 |
|
| BS EN ISO 9606-2-2004 |
焊工的認可試驗.熔焊.鋁和鋁合金 |
|
| BS EN ISO 9606-2-2004 |
焊工的認可試驗.熔焊.鋁和鋁合金 |
|
| BS EN ISO 9606-3-1999 |
焊工的認可試驗.熔焊.銅及銅合金 |
(Approval testing of welders - Fusion welding - Copper and copper alloys) |
| BS EN ISO 9606-4-1999 |
焊工的認可試驗.熔焊.鎳及鎳合金 |
(Approval testing of welders - Fusion welding - Nickel and nickel alloys) |
| BS EN ISO 9606-5-2000 |
焊工的認可試驗.熔焊.鈦和鈦合金.鋯和鋯合金 |
Approval testing of welders - Fusion welding - Titanium and titanium alloys, zirconium and zirconium alloys |
| BS EN ISO 9614-1-1993 |
聲學.利用聲音強度測定噪聲源功率級.第1部分:離散點測量 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points) |
| BS EN ISO 9614-2-1997 |
聲學.利用聲強度對噪聲源聲功率級別的測定.使用掃描測量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement by scanning |
| BS EN ISO 9614-3-2002 |
聲學.利用聲強度對噪聲源聲功率級別的測定.使用掃描精確測量法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning) |
| BS EN ISO 9626-1991 |
醫療設備生產用不銹鋼針管 |
(Stainless steel needle tubing for the manufacture of medical devices) |
| BS EN ISO 9653-2000 |
粘合劑.膠粘剪切強度的試驗方法 |
(Adhesives - Test method for shear strength of adhesive bonds (ISO 9653:1998)) |
| BS EN ISO 9664-1995 |
粘合劑.拉伸剪切結構膠粘劑疲勞性能的試驗方法 |
(Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear) |
| BS EN ISO 9665-2000 |
粘合劑.動物膠.取樣和試驗方法 |
(Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998)) |
| BS EN ISO 9680-1994 |
牙科手術用照明燈具規范 |
(Specification for dental operating light) |
| BS EN ISO 9687-1993 |
牙科設備.圖形符號 |
(Dental equipment - Graphical symbols) |
| BS EN ISO 9692-2-1998 |
焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊 |
(Welding and allied processes - Joint preparation - Submerged arc welding of steels) |
| BS EN ISO 9692-3-2001 |
焊接和相關工藝.接頭的準備.鋁及其合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 |
(Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys) |
| BS EN ISO 9692-4-2003 |
焊接和相關工藝.接頭制備.包鋼 |
(Welding and allied processes - Joint preparation - Clad steels) |
| BS EN ISO 9693-2000 |
金屬-陶瓷牙科修復系統 |
(Metal-ceramic dental restorative systems) |
| BS EN ISO 9702-1997 |
塑料.環氧氨硬化劑.對第1、2、3 氨組含氮量的測定 |
(Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content) |
| BS EN ISO 9703-3-1999 |
麻醉和呼吸護理報警信號.警報應用指南 |
(Anaesthetic and respiratory care alarm signals - Guidance on application of alarms) |
| BS EN ISO 9707-1991 |
信息和文本資料.圖書、報紙、期刊和電子出版物的分布和生產統計 |
(Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications) |
| BS EN ISO 9713-2004 |
神經外科植入物.顱內動脈瘤自閉合夾 |
|
| BS EN ISO 9771-1997 |
塑料.酚醛樹脂.測定可溶酚醛樹脂在酸性條件下的反應性 |
(Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions) |
| BS EN ISO 9773-1999 |
塑料.薄軟試樣垂直與小火焰源接觸燃燒性能的測定 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source) |
| BS EN ISO 9785-2002 |
船舶和造船技術.可行駛內燃機機動車的貨艙.總氣流需求的理論計算 |
(Ship and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required) |
| BS EN ISO 9787-1999 |
操縱工業機器人.坐標系和運動專門用語 |
(Manipulating industrial robots - Coordinate systems and motion nomenclatures) |
| BS EN ISO 9832-2003 |
動植物脂肪和油.工業己烷殘留量的測定 |
(Animal and vegetable fats and oils - Determination of residual technical hexane content) |
| BS EN ISO 9856-2004 |
輸送帶.彈性和固定延伸率的測定和彈性模量的計算 |
|
| BS EN ISO 9856-2004 |
輸送帶.彈性模數的測定 |
|
| BS EN ISO 9862-2005 |
土工合成織物.抽樣和試樣制備 |
|
| BS EN ISO 9863-1-2005 |
土工合成織物.特定壓力下厚度的測定.單層 |
|
| BS EN ISO 9863-2-1996 |
土工織物和相關產品.特定壓力下厚度的測定.多層制品的單層厚度測定程序 |
(Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Procedure for determination of thickness of single layers of multilayer products) |
| BS EN ISO 9864-2005 |
土工合成織物.土工織物和相關產品每單位面積質量測定的試驗方法 |
|
| BS EN ISO 9873-2000 |
手持式牙科器械.可重復使用的鏡子和手柄 |
(Dental hand instruments - Reusable mirrors and handles) |
| BS EN ISO 9875-2002 |
船舶和造船技術.船用回聲探測設備 |
(Ships and marine technology - Marine echo-sounding equipment) |
| BS EN ISO 9876-1999 |
船舶和航海技術.氣象圖用航海傳真接收機 |
(Ships and marine technology - Marine facsimile receivers for meteorological charts) |
| BS EN ISO 9886-2001 |
用生理測量法評定熱應變 |
(Evaluation of thermal strain by physiological measurements) |
| BS EN ISO 9886-2004 |
人類工程學.熱疲勞的生理學測量評價 |
|
| BS EN ISO 9887-1995 |
水質.含水介質中有機物化合物需氧生物降解性的評定.半連續激活污泥法(SCAS) |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS)) |
| BS EN ISO 9888-1999 |
水質.含水介質中有機化合物最大需氧生物降解能力的評定.靜態試驗(Zahn-Wellens法) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method)) |
| BS EN ISO 9902-1-2001 |
紡織機械.噪聲試驗規程.通用要求 |
(Textile machinery - Noise test code - Common requirements) |
| BS EN ISO 9902-2-2001 |
紡織機械.噪聲試驗規程.紡紗準備和紡紗機械 |
(Textile machinery - Noise test code - Spinning preparatory and spinning machinery) |
| BS EN ISO 9902-3-2001 |
紡織機械.噪聲試驗規程.非紡織機械 |
(Textile machinery - Noise test code - Nonwoven machines) |
| BS EN ISO 9902-4-2001 |
紡織機械.噪聲試驗規程.紗的加工、纜索和繩制造用機械 |
(Textile machinery - Noise test code - Yarn processing, cordage and rope manufacturing machines) |
| BS EN ISO 9902-5-2001 |
紡織機械.噪聲試驗規程.織造和針織用機械 |
(Textile machinery - Noise test code - Weaving and knitting preparatory machinery) |
| BS EN ISO 9902-6-2001 |
紡織機械.噪聲試驗規程.制布機械 |
(Textile machinery - Noise test code - Fabric manufacturing machines) |
| BS EN ISO 9902-7-2001 |
紡織機械.噪聲試驗規程.染色和精整機械 |
(Textile machinery - Noise test code - Dyeing and finishing machines) |
| BS EN ISO 9905-1994 |
離心泵技術規范.I類 |
(Technical specifications for centrifugal pumps - Class I) |
| BS EN ISO 9906-2000 |
回轉動力泵.液壓性能驗收試驗.1和2級 |
(Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com