標準號 |
中文名稱 |
英文名稱 |
| BS ISO 15152-2003 |
煙草.用作煙堿的總生物堿含量的測定.續流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| BS ISO 15153-2003 |
煙草.還原物質含量的測定.續流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| BS ISO 15154-2003 |
煙草.還原的碳水化物含量的測定.續流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| BS ISO 15161-2001 |
食品與飲料業用ISO 9001-2000的應用導則 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS ISO 15166-1-1998 |
膠粘劑.大塊樣品的準備方法.第1部分:由兩部分組成的系統 |
Adhesives - Methods of preparing bulk specimens - Two-part systems |
| BS ISO 15166-2-2001 |
膠粘劑.大塊樣品的準備方法.高溫處理一部分系統 |
Adhesives - Methods of preparing bulk specimens - Elevated-temperature-curing one-part systems |
| BS ISO 15169-2004 |
石油和液態石油產品.使用混合罐測量系統測定立式圓筒狀油罐中烴類的體積、密度和質量 |
|
| BS ISO 15171-1-1999 |
液壓和一般用途的連接.診斷用途的液壓耦合.壓力下非連接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure |
| BS ISO 15171-2-2000 |
流體動力和通用連接器.鑒定目的用液壓聯軸器.加壓連接用端頭為M16×2的聯軸器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure |
| BS ISO 15175-2004 |
土質.與地下水保護有關的土壤的表征 |
|
| BS ISO 15176-2002 |
土壤質量.挖掘土壤和要求再利用的其他土壤特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| BS ISO 15186-1-2000 |
聲學.建筑物隔聲測量和用聲強測量建筑部件.實驗室條件 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory conditions |
| BS ISO 15186-2-2003 |
聲學.用聲強作建筑物和建筑構件的隔聲測量.現場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Field measurements) |
| BS ISO 15186-3-2002 |
聲學.利用聲強度測量建筑物和建筑部件的隔音情況.低頻實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory measurements at low frequencies |
| BS ISO 15188-2001 |
術語標準化項目管理指南 |
Project management guidelines for terminology standardization |
| BS ISO 15190-2003 |
醫學實驗室.安全要求 |
(Medical laboratories - Requirements for safety) |
| BS ISO 15198-2004 |
臨床實驗室醫學.體外診斷醫療裝置.生產商驗證的用戶質量控制規程 |
|
| BS ISO 15198-2004 |
臨床實驗室藥物.體外診斷醫療設備.由制造商證實的用戶質量控制程序 |
|
| BS ISO 15202-1-2000 |
工作場所空氣.用感應耦合等離子體原子發射光譜法對氣載顆粒物質中金屬和非金屬的測定.取樣 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling |
| BS ISO 15202-2-2005 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和準金屬.樣品制備 |
|
| BS ISO 15202-2-2005 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和準金屬.樣品制備 |
|
| BS ISO 15202-3-2004 |
工作場所空氣.用感應耦合等離子體原子發射光譜法測定氣載顆粒物質中的金屬和類金屬物.分析 |
|
| BS ISO 15213-2003 |
食品和動物飼料的微生物學.計算厭氧條件下用亞硫酸鹽抑制細菌生長的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| BS ISO 15214-1998 |
食品和動物飼料的微生物學.適溫性乳酸菌的水平計數法.30℃的菌落計數技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| BS ISO 15217-2001 |
液壓傳動系統和件.16平方毫米接地接點電連接器.特性和要求 |
Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements |
| BS ISO 15218-2003 |
氣液傳動.3/2電磁閥.安裝接口表面 |
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces |
| BS ISO 15227-2000 |
光學和光學儀器.顯微鏡.立體可視顯微鏡試驗 |
Optics and optical instruments - Microscopes - Testing of stereomicroscopes |
| BS ISO 15237-2003 |
固體礦物燃料.煤中汞的總含量測定 |
(Solid mineral fuels - Determination of total mercury content of coal) |
| BS ISO 15238-2003 |
固體礦物燃料.煤中鎘的總含量測定 |
(Solid mineral fuels - Determination of total cadmium content of coal) |
| BS ISO 15242-1-2004 |
滾動軸承.振動測量方法.基本原則 |
|
| BS ISO 15243-2004 |
滾動軸承.損害和故障.術語、特性和成因 |
|
| BS ISO 15261-2004 |
振動和沖擊發生系統.詞匯 |
|
| BS ISO 15303-2001 |
動植物脂肪和油.GC/MS法檢測和識別揮發性有機雜質 |
Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminent by GC/MS |
| BS ISO 15310-2000 |
纖維增強的塑料化合物.用板彎曲方法測定面內剪切模量 |
Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method |
| BS ISO 15312-2004 |
滾動軸承.熱速額定值.計算和系數 |
|
| BS ISO 15314-2005 |
塑料.海上曝光法 |
|
| BS ISO 15319-2001 |
再生紙漿.用反射光儀器法評價可視原料中的雜質 |
Recycled pulps - Estimation of visible contraries by instrumental means using reflected light |
| BS ISO 15323-2002 |
奶粉蛋白質產品.氮溶解率測定 |
Dried milk protein products - Determination of nitrogen solubility index |
| BS ISO 15324-2001 |
金屬和合金的腐蝕.用滴水蒸發試驗評價應力腐蝕裂紋 |
Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| BS ISO 15350-2001 |
鋼鐵.碳和硫總含量的測定.感應爐中燃燒后的紅外線吸收法(常規法) |
Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) |
| BS ISO 15359-2000 |
紙和紙板.摩擦系數的靜態和動態測定.水平面法 |
Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method |
| BS ISO 15360-1-2001 |
再生紙漿.粘性和塑性的估測.外觀檢查法 |
Recycled pulps - Estimation of stickies and plastics - Visual method |
| BS ISO 15361-2001 |
紙漿.在濕潤或干燥的條件下測定零距抗張強度 |
Pulps - Determination of zero-span tensile strength, wet or dry |
| BS ISO 15364-2000 |
船舶技術.貨船用壓力/真空閥 |
Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 15368-2001 |
光學和光學儀器.平面的反射系數的測定和平行板透射率的測定 |
Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| BS ISO 15370-2004 |
船舶與海上技術.客輪的低位照明.布局 |
|
| BS ISO 15370-2004 |
船舶與海上技術.客輪的低位照明.布局 |
|
| BS ISO 15371-2000 |
船舶技術.船上廚房的深油烹飪設備保護用滅火系統.著火試驗 |
Ships and marine technology - Fire-extinguishing systems for protection of galley deep-fat cooking equipment - Fire tests |
| BS ISO 15372-2003 |
船舶與海上技術.充氣式救生艇.充氣室用漆布 |
(Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers) |
| BS ISO 15373-2001 |
塑料.聚合物水分散體.游離甲醛含量的測定 |
(Plastics - Polymer dispersions - Determination of free formaldehyde) |
| BS ISO 15374-1998 |
外科植入物.鍛件制品要求 |
(Implants for surgery - Requirements for production of forgings) |
| BS ISO 15379-1-2004 |
鋁生產用含碳材料.陰極塊材料.壓力作用下由于鈉滲透引起的膨脹的測定 |
|
| BS ISO 15379-2-2004 |
鋁生產用碳質材料.陰極塊材料.無壓力作用下由于鈉滲透引起的膨脹的測定 |
|
| BS ISO 15380-2002 |
潤滑劑、工業用油和相關產品(L類).系列H(液壓系統).HETG, HEPG, HEES 和 HEPR類的規范 |
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| BS ISO 15389-2004 |
航天系統.飛行著陸脫落插頭 |
|
| BS ISO 15390-2004 |
航天環境(自然和人工).星系宇宙射線模型 |
|
| BS ISO 15390-2004 |
航天環境(自然和人工).星系宇宙射線模型 |
|
| BS ISO 15394-2000 |
包裝.航運、運輸和可接受標簽的兩維符號和條碼 |
Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| BS ISO 15401-2000 |
船和造船技術.散貨船.船體結構的建造質量 |
Ships and marine technology - Bulk carriers - Construction quality of hull structure |
| BS ISO 15402-2000 |
船和造船技術.散貨船.船體結構的修理質量 |
Ships and marine technology - Bulk carriers - Repair quality of hull structure |
| BS ISO 15403-2000 |
天然氣.用作車輛壓縮燃料的天然氣質量的名稱與符號 |
Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles |
| BS ISO 15407-1-2000 |
18mm和26mm五氣口氣動方向控制閥.無電插頭的安裝界面 |
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector |
| BS ISO 15407-2-2003 |
氣壓傳動.五氣口方向控制閥,規格18mm和26mm.有任選電接頭的安裝接口 |
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) |
| BS ISO 15459-1-2000 |
信息技術.傳輸塊體的特殊識別.總則 |
Information technology - Unique identification of transport units - General |
| BS ISO 15469-1998 |
日光的空間分布.CIE標準陰天和晴天 |
Spatial distribution of daylight - CIE standard overcast sky and clear sky |
| BS ISO 15469-2004 |
日光的空間分布.CIE標準普通天 |
|
| BS ISO 15470-2005 |
表面化學分析.X射線光電光譜法.選定的儀器性能參數的描述 |
|
| BS ISO 15471-2005 |
表面化學分析.俄歇電子光譜法.選定的儀器性能參數的描述 |
|
| BS ISO 15472-2001 |
表面化學分析.X-射線光電譜.能量刻度的校正 |
Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales |
| BS ISO 15489-1-2001 |
信息和文獻工作.記錄品管理.總則 |
Information and documentation - Records management - General |
| BS ISO 15490-2001 |
細陶瓷(高級陶瓷、高級工業陶瓷).室溫下單片陶瓷抗拉強度的試驗方法 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
| BS ISO 155-1999 |
皮帶傳動.皮帶輪.中心調整極限值 |
Belt drives - Pulleys - Limiting values for adjustment of centres |
| BS ISO 15509-2001 |
膠粘劑.工程塑料接頭粘結強度的測定 |
Adhesives - Determination of the bond strength of engineering-plastic joints |
| BS ISO 15511-2004 |
信息和文獻工作.圖書館和相關組織的國際標準標識符 |
|
| BS ISO 15511-2004 |
信息和文獻工作.圖書館和相關組織的國際標準標識符 |
|
| BS ISO 15512-1999 |
塑料.水含量的測定 |
Plastics - Determination of water content |
| BS ISO 15513-2000 |
起重機.起重機司機(操縱者)、吊裝工、信號員和助手的資格要求 |
Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| BS ISO 15517-2004 |
煙草.硝酸鹽含量的測定.連續流分析法 |
|
| BS ISO 15517-2004 |
煙草.硝酸鹽含量的測定.連續流分析法 |
|
| BS ISO 15529-1999 |
光學和光學儀器.透光功能.樣品成像系統調整透光功能(MTF)的測量原理 |
Optics and optical instruments - Optical transfer function - Principles of measurement of modular transfer function (MTF) of sampled imaging systems |
| BS ISO 15544-2001 |
石油和天然氣工業.海上生產裝置.緊急響應要求和導則 |
Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response |
| BS ISO 15550-2002 |
內燃機.測量發動機功率的測定方法.總要求 |
Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| BS ISO 15552-2004 |
氣壓傳動.具有可拆卸安裝件的、1000kPa(10 bar)系列、孔徑為32mm至320mm的氣缸.基礎尺寸、安裝尺寸和附件尺寸 |
|
| BS ISO 15554-1999 |
食品加工中γ輻射線輻射設備劑量測定的實施規程 |
Practice for dosimetry in gamma irradiation facilities for food processing |
| BS ISO 15557-1999 |
輻射鉻膜劑量測定系統的實施規程 |
Practice for use of a radiochromic film dosimetry system |
| BS ISO 15558-1999 |
聚甲基丙烯酸甲酯劑量測定系統的實施規程 |
Practice for use of a polymethylmethacrylate dosimetry system |
| BS ISO 15559-1999 |
輻射化學光學波導劑量測定系統的實施規程 |
Practice for use of a radiochromic optical waveguide dosimetry system |
| BS ISO 15560-1999 |
用高劑量輻射劑量實驗室校驗的性能和特性的實施規程 |
Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory |
| BS ISO 15562-1999 |
食品加工用電離輻射和韌性輻射設備劑量測定的實施規程 |
Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing |
| BS ISO 15563-1999 |
乙醇-氯苯劑量測定系統的實施規程 |
Practice for use of the ethanol-chlorobenzene dosimetry system |
| BS ISO 15564-1999 |
輻射敏感指示計的使用指南 |
Guide for use of radiation-sensitive indicators |
| BS ISO 15565-1999 |
液態鉻輻射劑量測定系統的使用規程 |
Practice for use of a radiochromic liquid dosimetry system |
| BS ISO 15567-1999 |
X-射線(韌性輻射)劑量測定的實施規程 |
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing |
| BS ISO 15570-1999 |
纖維素乙酸酯劑量測定系統的使用規程 |
Practice for use of cellulose acetate dosimetry system |
| BS ISO 15583-2005 |
船舶和海上技術.海運標準清單 |
|
| BS ISO 15592-1-2001 |
切細煙草及其煙制品.抽樣、調節和分析方法.抽樣 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Sampling |
| BS ISO 15592-2-2001 |
切細煙草及其煙制品.抽樣、調節和分析方法.調節和檢驗用大氣環境 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing |
| BS ISO 15592-3-2003 |
細切煙草及其煙制品.抽樣、調節和分析方法.用常規分析吸煙機測定煙制品中顆粒物質總量、水和煙堿測定的準備和無煙堿干燥顆粒物質的計算 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and |
| BS ISO 15593-2001 |
環境煙草煙霧.呼吸懸浮顆粒評價.通過熒光和紫外線吸收對顆粒物質的測定 |
Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence |
| BS ISO 15597-2004 |
石油和石油產品試驗方法.BS 2000-503:氯和溴含量的測定.波長色散X射線熒光光譜測定法 |
|
| BS ISO 15600-2000 |
模具.注塑模用隔熱板 |
Tools for moulding - Thermal insulating sheets for injection moulds |
| BS ISO 15621-1999 |
吸尿輔助器.評定的一般指南 |
Urine-absorbing aids - General guidance on evaluation |
| BS ISO 15629-2002 |
物料搬運托盤.新托盤組件和用過的木制平托盤檢修用緊固件質量 |
Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| BS ISO 15632-2002 |
微光束分析.帶半導體探測器的能量散射X射線光譜儀的儀器規范 |
Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
| BS ISO 15634-2005 |
鐵礦石.鉻含量的測定.火焰原子吸收光譜測定法 |
|
| BS ISO 15635-2003 |
砂布.頁輪圓盤 |
(Coated abrasives - Flap discs) |
| BS ISO 15636-2003 |
剛紙圓盤用輔助墊片 |
(Back-up pads for vulcanized fibre discs) |
| BS ISO 15637-1-2002 |
圓柱形研磨套筒支承夾具.手動砂輪機用帶柄的支承夾具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines |
| BS ISO 15637-2-2002 |
圓柱形研磨套筒支承夾具.固定機械用支承夾具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures for stationary machines |
| BS ISO 15643-2002 |
道路建設和維修設備.瀝青粘合劑攤鋪機/鐵銑.術語和商業規范 |
Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| BS ISO 15644-2002 |
道路建設和維修設備. 碎片攤鋪機.術語和商業規范 |
Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications |
| BS ISO 15645-2002 |
道路建設和維修設備.道路壓碾機.術語和商業規范 |
Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
| BS ISO 15648-2004 |
黃油.鹽含量的測定.電勢滴定法 |
|
| BS ISO 15649-2001 |
石油和天然氣工業.管道 |
Petroleum and natural gas industries - Piping |
| BS ISO 15663-1-2001 |
石油和天然氣工業.壽命周期成本.方法學 |
Petroleum and natural gas industries - Life cycle costing - Methodology |
| BS ISO 15663-2-2001 |
石油和天然氣工業.壽命周期成本.方法論的應用和計算方法指南 |
Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods |
| BS ISO 15663-3-2001 |
石油和天然氣工業.生命周期成本.實施導則 |
(Petroleum and natural gas industries - Life cycle costing - Implementation guidelines) |
| BS ISO 15664-2001 |
聲學.露天設備噪聲控制設計程序 |
Acoustics - Noise control design procedures for open plant |
| BS ISO 15665-2003 |
聲學.管、閥和法蘭隔聲 |
(Acoustics - Acoustic insulation for pipes, valves and flanges) |
| BS ISO 15668-2000 |
銀行業務.安全文件傳輸(零售) |
Banking - Secure file transfer (retail) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com