標準號 |
中文名稱 |
英文名稱 |
| ISO 11040-1-1992 |
預灌裝注射器.第1部分:牙科局部麻醉器玻璃管 |
(Prefilled syringes; part 1: glass cylinders for dental local anaesthetic cartridges) |
| ISO 11040-2-1994 |
預灌裝注射器.第2部分:牙科局部麻醉器玻璃管用柱塞和盤柄 |
(Prefilled syringes - Part 2: Plungers and discs for dental local anaesthetic cartridges) |
| ISO 11040-3-1993 |
預灌裝注射器.第3部分:牙科局部麻醉瓶用鋁蓋 |
(Prefilled syringes; part 3: aluminium caps for dental local anaesthetic cartridges) |
| ISO 11040-4-1996 |
預灌裝注射器.第4部分:血管注射劑用玻璃圓拄體 |
(Prefilled syringes - Part 4: Glass barrels for injectables) |
| ISO 11040-5-2001 |
預灌裝注射器.第5部分:注射器用玻璃柱塞 |
(Prefilled syringes - Part 5: Plungers for injectables) |
| ISO 11041-1996 |
工作地點空氣.用氫化法和原子吸收光譜測定法對砷離子、砷化合物和三氧化砷蒸氣的測定 |
(Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry) |
| ISO 11042-1-1996 |
燃?xì)廨啓C(jī).氣體排放.第1部分:測量和評價 |
(Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation) |
| ISO 11042-2-1996 |
燃?xì)廨啓C(jī).氣體排放.第2部分:自動排放監測 |
(Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring) |
| ISO 11043-1998 |
羅勒屬胡椒酚甲醚油(羅勒L.) |
(Oil of basil, methyl chavicol type (Ocimum basilicum L.)) |
| ISO 11047-1998 |
土壤質量.土壤的王水萃取物中鎘、鉻、鈷、銅、鉛、錳、鎳和鋅的測定.火焰原子吸收光譜法和電熱原子吸收光譜 |
(Soil quality - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil - Flame and electrothermal atomic absorption spectrometric methods) |
| ISO 11048-1995 |
土壤質量.水溶性硫酸鹽和酸溶性硫酸鹽的測定 |
(Soil quality - Determination of water-soluble and acid-soluble sulfate) |
| ISO 11050-1993 |
小麥粉和硬粒麥麩.來自性畜雜質的測定 |
(Wheat flour and durum wheat semolina; determination of impurities of animal origin) |
| ISO 11051-1994 |
硬粒小麥.規范 |
(Durum weath (Triticum durum Desf.) - Specification) |
| ISO 11052-1994 |
硬粒小麥面及精制麥呋.黃顏料含量的測定 |
(Durum wheat flour and semolina - Determination of yellow pigment content) |
| ISO 11054-1993 |
切削工具.高速鋼組的命稱與符號 |
(Cutting tools; designation of high-speed steel groups) |
| ISO 11055-1996 |
往復式內燃機的飛輪.離合器的裝配尺寸 |
(Flywheels for reciprocating internal combustion engines - Installation dimensions for clutches) |
| ISO 11056-1999 |
感官分析.分類研究法.量級估計方法 |
(Sensory analysis - Methodology - Magnitude estimation method) |
| ISO 11058-1999 |
土工織物和土工織物相關產品.一般水平無負載水滲透試驗的測定 |
(Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load) |
| ISO 1106-1-1984 |
熔焊接縫射線照相檢驗的推薦實施規程.第1部分:50mm以下的鋼板的熔焊對接 |
(Recommended practice for radiographic examination of fusion welded joints; Part 1 : Fusion welded butt joints in steel plates up to 50 mm thick) |
| ISO 1106-2-1985 |
熔焊接縫射線照相檢驗的推薦實施規程.第2部分:厚度50-200(包括200)mm的鋼板的熔焊對接 |
(Recommended practice for radiographic examination of fusion welded joints; Part 2 : Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness) |
| ISO 1106-3-1984 |
熔焊接縫射線照相檢驗的推薦實施規程.第3部分:對管壁厚度至50mm的鋼管的熔焊環接 |
(Recommended practice for radiographic examination of fusion welded joints; Part 3 : Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness) |
| ISO 11064-1-2000 |
控制中心的人類工效學設計.第1部分:控制中心的設計原則 |
(Ergonomic design of control centres - Part 1: Principles for the design of control centres) |
| ISO 11064-2-2000 |
控制中心的人類工效學設計.第2部分:控制室的安排原則 |
(Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites) |
| ISO 11064-3 Technical Corrigendum 1-2002 |
控制中心的人類工效學設計.第3部分:控制室配置.技術勘誤1 |
(Ergonomic design of control centres - Part 3: Control room layout; Technical Corrigendum 1) |
| ISO 11064-3-1999 |
控制中心的人類工效設計.第3部分:控制室布置 |
(Ergonomic design of control centres - Part 3: Control room layout) |
| ISO 11064-4-2004 |
控制中心的人類工效學設計.第4部分:工作站的布置和尺寸 |
|
| ISO 1107-2003 |
漁網.網片.基本術語和定義 |
(Fishing nets - Netting - Basic terms and definitions) |
| ISO 1107-2003 |
漁網.網片.基本術語和定義 |
|
| ISO 11070-1998 |
一次性無菌管內導管導引器 |
(Sterile single-use intravascular catheter introducers) |
| ISO 11074-1-1996 |
土壤質量.詞匯.第1部分:土壤保護和污染的相關術語和定義 |
(Soil quality - Vocabulary - Part 1: Terms and definitions relating to the protection and pollution of the soil) |
| ISO 11074-2-1998 |
土壤質量.詞匯.第2部分:取樣的相關術語和定義 |
(Soil quality - Vocabulary - Part 2: Terms and definitions relating to sampling) |
| ISO 11074-4-1999 |
土壤質量.詞匯.第4部分:土壤和場所修正的有關術語和定義 |
(Soil quality - Vocabulary - Part 4: Terms and definitions related to the rehabilitation of soils and sites) |
| ISO 11075-1993 |
航空航天.飛機的解凍和防凍牛頓液.ISO2型 |
(Aerospace; aircraft de-icing/anti-icing newtonian fluids, ISO type I) |
| ISO 11076-2000 |
航空航天.飛行器流體解凍和防凍法 |
(Aerospace - Aircraft de-icing/anti-icing methods with fluids) |
| ISO 11077-1993 |
航空航天.自行式解凍和防凍車.功能要求 |
(Aerospace; self-proppelled de-icing/anti-icing vehicles; functional requirements) |
| ISO 11078-1994 |
航空航天.飛行器的除冰/防凍非牛頓流體.ISO II類 |
(Aerospace - Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II) |
| ISO 1108-1992 |
香料和調味品.非揮發乙醚萃取測定 |
(Spices and condiments; determination of non-volatile ether extract) |
| ISO 11082-1992 |
混凝土構件增強用焊接制品的認證方案 |
(Certification scheme for welded fabric for the reinforcement of concrete structures) |
| ISO 11083-1994 |
水質.四氯化鉻的測定.用于1.5的二苯卡巴肼的光譜法 |
(Water quality - Determination of chromium(VI) - Spectrometric method using 1,5-diphenylcarbazide) |
| ISO 11084-1-1993 |
印刷技術.攝影材料、銀箔和相紙的記錄系統.第1部分:3針系統 |
(Graphic technology; register systems for photographic materials, foils and paper; part 1: three-pin systems) |
| ISO 11086-1996 |
燃?xì)廨啓C(jī).詞匯 |
(Gas turbines - Vocabulary) |
| ISO 11087-1997 |
高山滑雪板裝配.緊固裝置.安全要求和試驗方法 |
(Alpine ski-bindings - Retention devices - Safety requirements and test methods) |
| ISO 11087-2004 |
高山雪橇緊固.緊固裝置.要求和試驗方法 |
|
| ISO 11088-1998 |
高山雪橇/聯接裝置/靴系統裝配的調整和檢驗 |
(Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system) |
| ISO 11088-2004 |
高山滑雪板/裝配/靴子設備的裝配、調節和檢查 |
|
| ISO 11088-2004 |
高山滑雪板/裝配/靴子設備的裝配、調節和檢查 |
|
| ISO 11089-1997 |
生合成橡膠.用高效液體色譜分析法測定抗退化性 |
(Rubber, raw synthetic - Determination of anti-degradants by high-performance liquid chromatography) |
| ISO 1109-1975 |
耐火材料制品.致密的定型耐火材料制品的分類 |
(Refractory products; Classification of dense shaped refractory products) |
| ISO 11090-1-1998 |
機床.電卸料刻模機的試驗條件.術語和精度試驗.第1部分:單柱架式鑿巖機(縱橫移動臺型和固定工作臺型) |
(Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type)) |
| ISO 11090-2-1998 |
機床.電卸料刻模機的試驗條件.術語和精度試驗.第2部分:雙柱架式鑿巖機(移動頭型和縱橫移動工作臺型) |
(Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 2: Two column machines (slide-head type and cross-slide table type)) |
| ISO 11091-1994 |
建筑制圖.園林設計制圖實用規程 |
(Construction drawings - Landscape drawing practice) |
| ISO 11092-1993 |
紡織品.生理效應.穩態條件下耐熱和耐水蒸汽性能的測量 |
(Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)) |
| ISO 11093-1-1994 |
紙和紙板.硬紙板錐形圓筒的檢驗.第1部分:取樣 |
(Paper and board - Testing of cores - Part 1: Sampling) |
| ISO 11093-2-1994 |
紙和紙板.硬紙板錐形圓筒的檢驗.第2部分:試樣的條件 |
(Paper and board - Testing of cores - Part 2: Conditioning of test samples) |
| ISO 11093-3-1994 |
紙和紙板.硬紙板錐形圓筒的檢驗.第3部分:利用烘干法對其含水量的測定 |
(Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven drying method) |
| ISO 11093-4-1997 |
紙和紙板.硬紙板錐形圓筒的檢驗.第1部分:尺寸測量 |
(Paper and board - Testing of cores - Part 4: Measurement of dimensions) |
| ISO 11093-5-1994 |
紙和紙板.硬紙板錐形圓筒的檢驗.第5部分:同心旋轉特性的測定 |
(Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation) |
| ISO 11093-6-1996 |
紙和紙板.硬紙板圓筒的檢驗.用三點法測定抗彎強度 |
(Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method) |
| ISO 11093-7-1997 |
紙和紙板.硬紙板圓筒的檢驗.用三點法測定彎曲模量 |
(Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method) |
| ISO 11093-8-1997 |
紙和紙板.硬紙板錐形圓筒的檢驗.第8部分:試驗?zāi)Ｐ头治龇y(cè)定自然頻率和彎曲模量 |
(Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis) |
| ISO 11093-9-1994 |
紙和紙板.硬紙板錐形圓筒的檢驗.第9部分:抗壓扁性的測定 |
(Paper and board - Testing of cores - Part 9: Determination of flat crush resistance) |
| ISO 11094-1991 |
聲學.由電動剪草機、草地拖拉機、草地和園藝拖拉機、專用切草機和帶有切草附件的草地和園藝拖拉機發出的空 |
(Acoustics; test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments) |
| ISO 11095-1996 |
利用標準物質作線性校準 |
(Linear calibration using reference materials) |
| ISO 11096-2002 |
道路車輛.行人防護.行人的大腿,腿和膝蓋的沖擊試驗方法 |
(Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee) |
| ISO 1110-1995 |
塑料.聚酰胺.試樣的加速調配 |
(Plastics - Polyamides - Accelerated conditioning of test specimens) |
| ISO 11102-1-1997 |
內燃機.手柄起動裝置.安全技術要求和檢驗 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests) |
| ISO 11102-2-1997 |
內燃機.手柄起動裝置.第2部分:測量脫扣距離和角度的方法 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement) |
| ISO 11103-1991 |
空間數據和信息傳輸系統.無線電測量和軌道數據 |
(Space data and information transfer systems; radio metric and orbit data) |
| ISO 11104-1991 |
空間數據和信息傳輸系統.時間碼格式 |
(Space data and information transfer systems; time code formats) |
| ISO 11104-2003 |
空間數據和信息傳輸系統.時間碼格式 |
|
| ISO 11105-1997 |
小型船舶.汽油發動機和/或汽油罐防水船艙的通風 |
(Small craft - Ventilation of petrol engine and/or petrol tank compartments) |
| ISO 11106-1-1997 |
攝影術.放影師沖洗幻燈片用淺盤子.第1部分:敞口式直放沖洗幻燈片盤(歐洲設計的) |
(Photography - Slide trays for projectors - Part 1: Straight slide tray, open type (European design)) |
| ISO 11106-2-1997 |
攝影術.放影師沖洗幻燈片用淺盤子.第2部分:封閉式直放沖洗幻燈片盤(日本設計的) |
(Photography - Slide trays for projectors - Part 2: Straight slide tray, closed type (Japanese design)) |
| ISO 11108-1996 |
信息和文獻工作.檔案紙.穩定耐久性的要求 |
(Information and documentation - Archival paper - Requirements for permanence and durability) |
| ISO 11110-1997 |
冬運設備.雪橇功能部件/滑雪靴/雪橇連接裝置調節裝置用試驗設備.要求和試驗 |
(Winter-sports equipment - Test devices for the setting of the functional unit ski/boot/binding - Requirements and tests) |
| ISO 11111-1995 |
紡織機器的安全要求 |
(Safety requirements for textile machinery) |
| ISO 11112 AMD 1-2001 |
土方機械.駕駛員座椅.尺寸和要求.修改件1 |
(Earth-moving machinery - Operator`s seat - Dimensions and requirements; Amendment 1) |
| ISO 11112-1995 |
土方機械.駕駛員座椅的尺寸和要求 |
(Earth-moving machinery - Operator`s seat - Dimensions and requirements) |
| ISO 11113-1995 |
液化氣氣瓶(乙炔和液化石油氣).充氣時間的檢驗 |
(Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling) |
| ISO 11114-1-1997 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第1部分:金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials) |
| ISO 11114-2-2000 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第2部分:非金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials) |
| ISO 11114-3-1997 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第3部分:有氧環境中自燃試驗 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere) |
| ISO 11116-1-1999 |
氣體瓶.閥門與氣體瓶連接的17E錐型螺紋.第1部分:規范 |
(Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specification) |
| ISO 11116-2-1999 |
氣體瓶.閥門與氣體瓶連接的17E錐型螺紋.第1部分:檢驗量規 |
(Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges) |
| ISO 11117-1998 |
氣瓶.工業和醫療氣瓶用閥護罩和閥擋.設計、制作和試驗 |
(Gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests) |
| ISO 11118-1999 |
儲氣瓶.非再填充式金屬氣瓶.規范和試驗方法 |
(Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods) |
| ISO 11119-3-2002 |
混合結構氣瓶.規范和試驗方法.第3部分:無負載共用金屬或非金屬襯里的全纏繞纖維增強混合氣瓶 |
(Gas cylinders of composite construction - Specification and test methods - Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners) |
| ISO 1112-1999 |
計時儀器.功能和非功能寶石 |
(Horology - Functional and non-functional jewels) |
| ISO 11120-1999 |
氣體瓶.150升-3000升水容量的可再填充的無縫鋼管.設計,結構和試驗 |
(Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing) |
| ISO 11124-1-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料規范.第1部分:一般說明和分類 |
(Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification) |
| ISO 11124-2-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料規范.第2部分:冷硬鑄鐵砂粒 |
(Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit) |
| ISO 11124-3-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料規范.第3部分:高碳鑄鋼噴丸及砂粒 |
(Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit) |
| ISO 11124-4-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料規范.第4部分:低碳鑄鋼噴丸 |
(Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot) |
| ISO 11125-1-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第1部分:取樣 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling) |
| ISO 11125-2-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第2部分:粒徑分布測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution) |
| ISO 11125-3-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第3部分:硬度測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness) |
| ISO 11125-4-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第4部分:表觀密度測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density) |
| ISO 11125-5-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第5部分:有缺陷顆粒百分比和微結構的測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure) |
| ISO 11125-6-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第6部分:雜質的測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter) |
| ISO 11125-7-1993 |
涂料和相關產品使用前鋼襯底的制備.金屬噴砂清理磨料的試驗方法.第7部分:濕度的測定 |
(Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture) |
| ISO 11126-1 Technical Corrigendum 1-1997 |
清漆及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第1部分:總論和分類.技術勘誤表1 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1) |
| ISO 11126-1 Technical Corrigendum 2-1997 |
清漆及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第1部分:總論和分類.技術勘誤表2 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2) |
| ISO 11126-1-1993 |
涂料及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第1部分:總論和分類 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification) |
| ISO 11126-10-2000 |
涂料及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第10部分:石榴石 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne) |
| ISO 11126-3-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第3部分:煉銅熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag) |
| ISO 11126-4-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第4部分:煤爐熔渣 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag) |
| ISO 11126-5-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第5部分:煉鎳熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag) |
| ISO 11126-6-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第5部分:鐵爐熔渣 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag) |
| ISO 11126-7 Technical Corrigendum 1-1999 |
清漆及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第7部分:熔化氧化鋁.技術勘誤1 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1) |
| ISO 11126-7-1995 |
涂料和相關制品使用前鋼襯底的制備.噴砂清理磨料的規范.第7部分:熔融氧化鋁 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide) |
| ISO 11126-8-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.第8部分:橄欖石沙 |
(Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand) |
| ISO 11126-9-1999 |
清漆及有關產品使用前對鋼底襯的制備.非金屬噴沙清理磨料規范.第9部分:十字石 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite) |
| ISO 11127-1-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第1部分:取樣 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling) |
| ISO 11127-2-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第2部分:粒徑分布測定 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution) |
| ISO 11127-3-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第3部分:表觀密度測定 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density) |
| ISO 11127-4-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第4部分:玻璃劃痕試驗法評定硬度 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test) |
| ISO 11127-5-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第5部分:濕度測定 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture) |
| ISO 11127-6-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第6部分:通過測量傳導性測定水溶雜質 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement) |
| ISO 11127-7-1993 |
涂料和相關產品使用前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第7部分:水溶氯化物的測定 |
(Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides) |
| ISO 1113-1979 |
信息處理.穿孔紙帶的7位編碼字符集表示法 |
(Information processing; Representation of the 7- bit coded character set on punched tape) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com