標準號 |
中文名稱 |
英文名稱 |
| EN ISO 13846-2000 |
塑料管道系統熱塑性加壓塑料管道用端部負載軸承和非端部負載軸承的安裝和連接在內水壓下長期密封的試驗 |
Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000) |
| EN ISO 13849-2-2003 |
機械安全 控制系統有關安全部件 第2部分：振動 |
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003) |
| EN ISO 13897-2004 |
牙科學.汞齊合金膠囊 |
|
| EN ISO 13900-2002 |
鋼硼含量的測定蒸餾后姜黃素光譜測定法 |
Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
| EN ISO 13916-1996 |
焊接預熱溫度、道間溫度和預熱維持溫度測量的指南 |
Welding - Guidance for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) |
| EN ISO 13918-1998 |
焊接電弧螺栓焊用螺栓和陶瓷箍套 |
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998) |
| EN ISO 13919-1-1996 |
焊接電子束和激光焊接頭缺陷的質量分級指南第1部分：鋼 |
Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13919-2-2001 |
焊接電子束和激光焊接頭缺陷的質量分級指南第2部分：鋁及其可焊合金 |
Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 13920-1996 |
焊接焊接結構的一般公差長度和角度的尺寸形狀和位置 |
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
| EN ISO 13927-2003 |
塑料用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001) |
| EN ISO 13929-2001 |
小艇操舵裝置齒輪傳動連接系統 |
Small craft - Steering gear - Geared link systems (ISO 13929:2001) |
| EN ISO 13934-1-1999 |
紡織品織物拉伸特性第1部分：用條樣法測定斷裂強力和斷裂伸長率 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) |
| EN ISO 13934-2-1999 |
紡織品織物拉伸特性第2部分：用抓樣法測定斷裂強力和斷裂伸長率 |
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999) |
| EN ISO 13935-1-1999 |
紡織品織物及其制品的接縫拉伸特性第1部分：用條樣法測定接縫斷裂強力 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999) |
| EN ISO 13935-2-1999 |
紡織品織物及其制品的接縫拉伸特性第2部分：用抓樣法測定接縫斷裂強力 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999) |
| EN ISO 13936-1-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第1部分:固定接縫開口法 |
|
| EN ISO 13936-2-2004 |
紡織品.機織物縫合處紗線抗脫性測定.第2部分:固定負載法 |
|
| EN ISO 13937-1-2000 |
紡織品織物撕破特性第1部分：用沖擊擺錘方法測定撕破強力(埃爾門多夫) |
Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000) |
| EN ISO 13937-2-2000 |
紡織品織物撕破特性第2部分：褲形試樣撕破強力的測定(單舌法) |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| EN ISO 13937-3-2000 |
紡織品織物撕破特性第3部分：翼形試樣撕破強力的測定(單舌法) |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000) |
| EN ISO 13937-4-2000 |
紡織品織物撕破特性第4部分：舌形試樣撕破強力的測定(雙舌法) |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000) |
| EN ISO 13938-1-1999 |
紡織品織物脹破特性第1部分：脹破強力測定的液壓方法 |
Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
| EN ISO 13938-2-1999 |
紡織品織物脹破特性第2部分：脹破強力測定的氣壓方法 |
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
| EN ISO 13943-2000 |
消防安全詞匯 |
Fire safety - Vocabulary (ISO 13943:1999) |
| EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| EN ISO 13995-2000 |
防護服 機械特性測定服裝材料在壓力下防液體滲透阻力的測定 |
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
| EN ISO 13997-1999 |
防護服 機械特性 抗尖銳物體切割性的測定 |
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
| EN ISO 13998-2003 |
防護服 圍裙、褲子和背心耐手持刀切割和刺破性 |
Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| EN ISO 140-1-1997 |
聲學建筑物和建筑構件的隔聲測量第1部分：能抑制側向傳聲的實驗室試驗裝置的要求 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997) |
| EN ISO 140-1/prA1-2002 |
聲學建筑物和建筑構件的隔聲測量第1部分：能抑制側向傳聲的實驗室試驗裝置的要求修改A1:輕質構件試驗 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission; Amendment 1: Specific requirements on the frame of the test opening for lightwe |
| EN ISO 140-12-2000 |
聲學建筑物和建筑構件的隔聲測量第12部分：房間對房間的空氣聲和共有樓板的撞擊聲的隔聲的實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000) |
| EN ISO 140-14-2004 |
聲學.建筑物和建筑構件的隔音測量.第14部分:場地的特殊情況的指南 |
|
| EN ISO 140-3-1995 |
聲學建筑物和建筑構件的隔聲測量第3部分：建筑物構件空氣聲隔聲的實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) |
| EN ISO 140-3/prA1-2002 |
聲學建筑物和建筑構件的隔聲測量第3部分：建筑構件隔聲的實驗室測量修改A1:兩層間避免強連接的輕質雙 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements; Amendment 1: Specific mounting conditions for lightweight double partitions to avoid st |
| EN ISO 140-4-1998 |
聲學建筑物和建筑構件的隔聲測量第4部分：房間之間空氣聲隔聲的現場測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
| EN ISO 140-5-1998 |
聲學建筑物和建筑構件的隔聲測量第5部分：飾面構件和飾面的空氣聲隔聲的現場測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of facade elements and facades (ISO 140-5:1998) |
| EN ISO 140-6-1998 |
聲學建筑物和建筑構件的隔聲測量第6部分：地板撞擊聲隔聲的實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998) |
| EN ISO 140-7-1998 |
聲學建筑物和建筑構件的隔聲測量第7部分：地板撞擊聲隔聲的現場測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998) |
| EN ISO 140-8-1997 |
聲學建筑物和建筑構件的隔聲測量第8部分：重型標準地板上敷設面層使傳遞的撞擊噪聲減低的實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997) |
| EN ISO 14001-1996 |
環境管理體系規范及使用指南 |
Environmental management systems - Specification with guidance for use (ISO 14001:1996) |
| EN ISO 14001-2004 |
環境管理系統.使用的要求和指南 |
|
| EN ISO 1401-1999 |
農業噴霧用橡膠軟管 |
Rubber hoses for agricultural spraying (ISO 1401:1999) |
| EN ISO 1402-1996 |
橡膠和塑料軟管和軟管組件液壓試驗 |
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) |
| EN ISO 14020-2001 |
環境標志和聲明通用原則 |
Environmental labels and declarations - General principles (ISO 14020:2000) |
| EN ISO 14021-2001 |
環境標志和聲明自我環境聲明(II型環境標志) |
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
| EN ISO 14024-2000 |
環境標志和聲明I型環境標志原則和程序 |
Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999) |
| EN ISO 1403-1997 |
一般用途的輸水橡膠軟管規范 |
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) |
| EN ISO 14031-1999 |
環境管理環境表現評價指南 |
Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:1999) |
| EN ISO 14040-1997 |
環境管理生命周期評價原則與框架 |
Environmental management - Life cycle assessment - Principles and framework (ISO 14040:1997) |
| EN ISO 14041-1998 |
環境管理生命周期評價目的與范圍的確定清單分析 |
Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis (ISO 14041:1998) |
| EN ISO 14042-2000 |
環境管理生命周期評價生命周期影響評價 |
Environmental management - Life cycle assessment - Life cycle impact assessment (ISO 14042:2000) |
| EN ISO 14043-2000 |
環境管理生命周期評價生命周期解釋 |
Environmental management - Life cycle assessment - Life cycle interpretation (ISO 14043:2000) |
| EN ISO 14111-1999 |
天然氣分析溯源性準則 |
Natural gas - Guidelines for traceability in analysis (ISO 14111:1997) |
| EN ISO 14113-1997 |
氣焊設備最大設計壓力為450bar的壓塑空氣和液化氣用橡膠和塑料軟管組件 |
Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997) |
| EN ISO 14114-1999 |
氣焊設備焊接、切割及相關工藝用的乙炔匯流系統一般要求 |
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999) |
| EN ISO 14122-1-2001 |
機器安全接近機器的固定方式第1部分：兩種級別的固定方式的選擇 |
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels (ISO 14122-1:2001) |
| EN ISO 14122-2-2001 |
機器安全接近機器的固定方式第2部分：工作平臺和通道 |
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) |
| EN ISO 14122-3-2001 |
機器安全接近機器的固定方式第3部分：樓梯、梯子和護欄 |
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
| EN ISO 14122-4-2004 |
機械安全.進入機械的固定方式.第4部分:固定梯子 |
|
| EN ISO 14125-1998 |
纖維增強塑料復合材料彎曲性能的測定 |
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998) |
| EN ISO 14126-1999 |
纖維增強塑料復合材料平面方向壓縮性的測定 |
Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999) |
| EN ISO 14129-1997 |
纖維增強塑料復合材料用±45°張力試驗法測定平面剪應力/剪應變特性、包括平面切變模量和剪切強度 |
Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by ?45°tension test method (ISO 14129:1997) |
| EN ISO 14130-1997 |
纖維增強塑料復合材料用短試片法測定表觀層間粘合剪切強度 |
Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| EN ISO 14155-1-2003 |
人用醫療器械的臨床調查 第1部分：一般要求 |
Clinical investigation of medical devices for human subjects - Part 1: General requirements (ISO 14155-1:2003) |
| EN ISO 14155-2-2003 |
人體臨床檢查用醫療裝置第2部分：臨床檢查計劃 |
Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans (ISO 14155-2:2003) |
| EN ISO 14159-2004 |
機械安全.機械設計的衛生要求 |
|
| EN ISO 14160-1998 |
使用液體化學滅菌劑對包括動物源材料在內的一次性使用醫療器具進行滅菌的確認和常規控制 |
Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid sterilants (ISO 14160:1998) |
| EN ISO 14161-2000 |
醫療保健產品滅菌生物指示物選擇、使用和檢驗結果解釋指南 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000) |
| EN ISO 14163-1998 |
聲學采用消聲器的噪聲控制指南 |
Acoustics - Guidelines for noise control by silencers (ISO 14163:1998) |
| EN ISO 14181-2000 |
動物飼料有機氯化物農藥殘留物的測定氣相色譜法 |
Animal feeding stuffs - Determination of residues of organochloride pesticides - Gas chromatographic method (ISO 14181:2000) |
| EN ISO 14182-1999 |
動物飼料有機磷農藥殘留物的測定氣相色譜法 |
Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999) |
| EN ISO 14184-1-1998 |
紡織品甲醛的測定第1部分：游離和水解態甲醛(水萃取法) |
Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998) |
| EN ISO 14184-2-1998 |
紡織品甲醛的測定第2部分：釋放的甲醛(蒸氣吸收法) |
Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998) |
| EN ISO 1421-1998 |
橡膠或塑料涂覆織物拉伸強度和斷裂伸長的測定 |
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998) |
| EN ISO 14233-2003 |
牙科學聚合物基模壓材料 |
Dentistry - Polymer-based die materials (ISO 14233:2003) |
| EN ISO 14246-2001 |
可運輸氣瓶氣瓶閥門生產試驗和檢驗 |
Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001) |
| EN ISO 14253-1-1998 |
產品幾何量技術規范(GPS)工作的測量檢驗和測量設備第1部分：按規范檢驗一致性或不一致性的判定規則 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998) |
| EN ISO 14257-2001 |
聲學工作室中聲學性能評估用空間聲音分布曲線的測量和參量描述 |
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
| EN ISO 14268-2002 |
皮革物理及機械性能試驗水蒸汽滲透性的測定 |
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2002) |
| EN ISO 14270-2001 |
電阻點焊、縫焊和凸焊的機械撕裂試驗用樣品尺寸及程序 |
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2000) |
| EN ISO 14271-2001 |
電阻點焊、凸焊和縫焊的維氏硬度試驗(低荷載和微硬度) |
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000) |
| EN ISO 14272-2001 |
電阻點焊和凸焊的交叉拉伸試驗用樣品尺寸和程序 |
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000) |
| EN ISO 14273-2001 |
電阻點焊、縫焊和凸焊的抗剪試驗用樣品尺寸和程序 |
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000) |
| EN ISO 14284-2002 |
鋼和鐵測定化學成分用樣品的取樣和制備 |
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN ISO 14310-2001 |
石油和天然氣工業井下設備裝填器和橋狀砂堵 |
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001) |
| EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| EN ISO 14324-2003 |
電阻點焊焊縫的破壞性試驗 點焊縫的疲勞試驗方法 |
Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003) |
| EN ISO 14327-2004 |
電阻焊接.電阻點焊、凸焊和縫焊的可焊性凸角的測定過程 |
|
| EN ISO 14329-2003 |
電阻焊接焊縫的破環性檢驗電阻點焊、縫焊和凸焊焊縫的疲勞類型和幾何量測量 |
Resistance welding - Destructive test of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003) |
| EN ISO 14356-2003 |
牙科 修復材料 |
Dentistry - Duplicating material (ISO 14356:2003) |
| EN ISO 14372-2001 |
焊接耗材通過測量擴散氫方法測定手工電弧焊 焊條的抗?jié)裥?/td>
| Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000) |
| EN ISO 14402-1999 |
水質流動分析法(FIA和CFA)測定苯酚指數 |
Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999) |
| EN ISO 14403-2002 |
水質用連續流量分析法測定總氰化物和游氰化物含量 |
Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
| EN ISO 14419-1999 |
紡織品拒油性耐碳?xì)浠衔镌囼?yàn) |
Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998) |
| EN ISO 14438-2002 |
建筑玻璃能量平衡值的測定計算法 |
Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002) |
| EN ISO 14453-1998 |
紙漿丙酮可溶物的測定 |
Pulps - Determination of acetone-soluble matter (ISO 14453:1997) |
| EN ISO 14501-1998 |
乳和乳粉黃曲霉毒素M1含量的測定用免疫親合色譜法提純和用高效液相色譜法 |
Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography (IS0 14501:1998) |
| EN ISO 14509-2000 |
小艇由機動游艇所發出空氣噪聲的測定 |
Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000) |
| EN ISO 14509/A1-2004 |
小艇.動力娛樂用艇發出的空氣噪音的測量.修改件1 |
|
| EN ISO 14526-1-1999 |
塑料酚醛粉末模塑化合物(PF-PMCs)第1部分：命名體系及基本規范 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999) |
| EN ISO 14526-2-1999 |
塑料酚醛粉末模塑化合物(PF-PMCs)第2部分：試樣的制備和性能的測定 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999) |
| EN ISO 14526-3-1999 |
塑料酚醛粉末模塑化合物(PF-PMCs)第3部分：對所選模塑化合物的要求 |
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999) |
| EN ISO 14527-1-1999 |
塑料脲醛和脲/蜜胺酚醛粉末模塑化合物(UF- 和UF/MF-PMCs)第1部分：命名體系及基本規范 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999) |
| EN ISO 14527-2-1999 |
塑料脲醛和脲/蜜胺酚醛粉末模塑化合物(UF- 和UF/MF-PMCs)第2部分：試樣的制備和性能的測定 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999) |
| EN ISO 14527-3-1999 |
塑料脲醛和脲/蜜胺酚醛粉末模塑化合物(UF- 和UF/MF-PMCs)第3部分：對選擇的模塑化合物的要求 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999) |
| EN ISO 14528-1-1999 |
塑料蜜胺酚醛粉末模塑化合物(MF-PMCs)第1部分：命名體系及基本規范 |
m und Basi Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999) |
| EN ISO 14528-2-1999 |
塑料蜜胺酚醛粉末模塑化合物(MF-PMCs)第2部分：試樣的制備和性能的測定 |
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN ISO 14528-3-1999 |
塑料蜜胺酚醛粉末模塑化合物(MF-PMCs)第3部分：對所選模塑化合物的要求 |
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999) |
| EN ISO 14529-1-1999 |
塑料蜜胺/酚醛粉末模塑化合物(MP-PMCs)第1部分：命名體系及基本規范 |
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999) |
| EN ISO 14529-2-1999 |
塑料蜜胺/酚醛粉末模塑化合物(MP-PMCs)第2部分：試樣的制備和性能的測定 |
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999) |
| EN ISO 14529-3-1999 |
塑料蜜胺/酚醛粉末模塑化合物(MP-PMCs)第3部分：對所選模塑化合物的要求 |
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999) |
| EN ISO 14530-1-1999 |
塑料不飽和聚酯粉末模塑化合物(UP-PMCs)第1部分：命名體系及基本規范 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999) |
| EN ISO 14530-2-1999 |
塑料不飽和聚酯粉末模塑化合物(UP-PMCs)第2部分：試樣的制備和性能的測定 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999) |
| EN ISO 14530-3-1999 |
塑料不飽和聚酯粉末模塑化合物(UP-PMCs)第3部分：對所選擇模塑化合物的要求 |
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999) |
| EN ISO 14534-2002 |
眼科光學隱形眼鏡和隱形眼鏡保護產品基本要求 |
Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002) |
| EN ISO 14539-2001 |
操作型工業機器人用抓式鉗子進行物品傳遞詞匯和特征表示 |
Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics (ISO 14539:2000) |
| EN ISO 14554-1-2000 |
焊接質量要求金屬材料的電阻焊接第1部分：完整質量要求 |
Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000) |
| EN ISO 14554-2-2000 |
焊接質量要求金屬材料的電阻焊接第2部分：基本質量要求 |
Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000) |
| EN ISO 14555-1998 |
焊接金屬材料的電弧螺栓焊 |
Welding - Arc stud welding of metallic materials (ISO 14555:1998) |
| EN ISO 14556-2000 |
鋼夏比V形切痕擺式?jīng)_擊試驗儀器試驗法 |
Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com