標準號 |
中文名稱 |
英文名稱 |
| ISO 6170-1999 |
紡紗機.粗梳機用搓條橡膠 |
(Spinning machinery - Condenser rubbers for cards) |
| ISO 6173-1982 |
自由端紡紗機.詞匯.三種語言版 |
(Open-end spinning machines; Vocabulary Trilingual edition) |
| ISO 6176-1994 |
紡織機械.經紗上漿機.最大有效寬度 |
(Textile machinery - Warp sizing machines - Maximum usable width) |
| ISO 6177-1986 |
紡織機械.卷布輥.術語和主要尺寸 |
(Textile machinery; Cloth rollers; Terminology and main dimensions) |
| ISO 6178-1983 |
離心機.結構和安全規則.圓柱形轉子殼體內切向應力的計算方法 |
(Centrifuges; Construction and safety rules; Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor) |
| ISO 6179-1998 |
硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體傳播速度的測定(重力測重技術) |
(Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)) |
| ISO 618-1974 |
紙.信紙包括活頁紙 |
(Paper; Articles of stationery that include detachable sheets; Overall trimmed sizes) |
| ISO 6182-1-1993 |
火災防護措施.自動噴水系統.第1部分:噴灑器的要求和試驗方法 |
(Fire protection; automatic sprinkler systems; part 1: requirements and test methods for sprinklers) |
| ISO 6182-1-2004 |
消防.自動噴水滅火系統.第1部分:灑水噴頭的性能要求和試驗方法 |
|
| ISO 6182-11-2003 |
消防.自動噴水滅火系統.第11部分:吊管架的要求和試驗方法 |
(Fire protection - Automatic sprinkler systems - Part 11: Requirements and test methods for pipe hangers ) |
| ISO 6182-11-2003 |
消防.自動噴水滅火系統.第11部分:吊管架的要求和試驗方法 |
|
| ISO 6182-2-1993 |
火災防護措施.自動噴水系統.第2部分:濕式報警閥.減速箱和水馬達報警器 |
(Fire protection; automatic sprinkler systems; part 2: requirements and test methods for wet alarm valves, retard chambers and water motor alarms) |
| ISO 6182-3-1993 |
火災防護措施.自動噴水系統.第3部分:干式管閥的試驗方法和要求 |
(Fire protection; automatic sprinkler systems; part 3: requirements and test methods for dry pipe valves) |
| ISO 6182-4-1993 |
火災防護措施.自動噴水系統.第4部分:速啟裝置的要求和試驗方法 |
(Fire protection; automatic sprinkler systems; part 4: requirements and test methods for quick-opening devices) |
| ISO 6182-5-1995 |
火災防護措施.自動噴水系統.第5部分:噴水滅火閥的要求和試驗方法 |
(Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves) |
| ISO 6182-7-2004 |
消防.自動噴水滅火系統.第7部分:早期撲滅快速反應灑水噴頭的要求和試驗方法 |
|
| ISO 6183-1990 |
火災防護設備.房屋用二氧化碳滅火裝置.設計和安裝 |
(Fire protection equipment; carbon dioxide extinguishing systems for use on premises; design and installation) |
| ISO 6184-1-1985 |
防爆系統.第1部分:空氣中易燃?jí)m埃爆炸指數的測定 |
(Explosion protection systems; Part 1 : Determination of explosion indices of combustible dusts in air) |
| ISO 6184-2-1985 |
防爆系統.第2部分:空氣中易燃?xì)怏w爆炸指數的測定 |
(Explosion protection systems; Part 2 : Determination of explosion indices of combustible gases in air) |
| ISO 6184-3-1985 |
防爆系統.第3部分:除粉塵/空氣和氣體/空氣混合物以外的燃料/空氣混合物爆炸指數的測定 |
(Explosion protection systems; Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures) |
| ISO 6184-4-1985 |
防爆系統.第4部分:爆炸排除系統效能的測定 |
(Explosion protection systems; Part 4 : Determination of efficacy of explosion suppression systems) |
| ISO 6185-1-2001 |
充氣船.第1部分:最大電動機功率為4.5KW的船 |
(Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW) |
| ISO 6185-2-2001 |
充氣船.第2部分:最大電動機功率為4.5KW至15KW的船 |
(Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive) |
| ISO 6185-3-2001 |
充氣船.第3部分:最大電動機功率為15KW以上的船 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater |
| ISO 6186-1998 |
塑料.澆注性的測定 |
Plastics - Determination of pourability |
| ISO 6187-2001 |
硬質泡沫塑料.易碎性的測定 |
Rigid cellular plastics - Determination of friability |
| ISO 6189-1983 |
聲學.用于保護聽覺的純音響空氣傳導閾值的聽力測定 |
Acoustics; Pure tone air conduction threshold audiometry for hearing conservation purposes |
| ISO 619-1981 |
錳礦石.鉻含量的測定.二苯卡巴肼光度測定法和過硫酸銀滴定法 |
Manganese ores; Determination of chromium content; Diphenylcarbazide photometric method and silver persulphate titrimetric method |
| ISO 6191-1981 |
工業用輕質烯烴.微量水的測定.費歇爾(Karl Fischer)法 |
Light olefins for industrial use; Determination of traces of water; Karl Fischer method |
| ISO 6192-1981 |
工業用輕質烯烴.氨的測定.光度法 |
Light olefins for industrial use; Determination of ammonia; Photometric method |
| ISO 6194-1-1982 |
旋轉軸唇型密封件.第1部分:公稱尺寸和公差 |
Rotary shaft lip type seals; Part 1 : Nominal dimensions and tolerances |
| ISO 6194-2-1991 |
旋轉軸唇型密封件.第2部分:詞匯 |
Rotary shaft lip type seals; part 2: vocabulary |
| ISO 6194-3-1988 |
旋轉軸唇型密封墊.第3部分:儲存、運輸及安裝 |
Rotary shaft lip type seals; part 3: storage, handling and installation |
| ISO 6194-4-1999 |
旋轉軸唇型密封件.第4部分:性能試驗過程 |
Rotary shaft lip type seals - Part 4: Performance test procedures |
| ISO 6194-5-1990 |
旋轉軸唇型密封件.第5部分:目視缺陷的鑒別 |
Rotary shaft lip type seals; part 5: identification of visual imperfections |
| ISO 6195-2002 |
流體動力系統和件.往復作用的活塞桿刮垢環罩.尺寸和公差 |
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
| ISO 6196-1-1993 |
縮微攝影技術詞匯.第1部分:一般術語 |
Micrographics; Vocabulary; Part 01: General terms |
| ISO 6196-10 Technical Corrigendum 1-2004 |
縮微攝影技術.詞匯.第10部分:索引.技術勘誤1 |
|
| ISO 6196-10-1999 |
縮微攝影技術.詞匯.第10部分:索引 |
Micrographics - Vocabulary - Part 10: Index |
| ISO 6196-2-1993 |
縮微攝影技術.詞匯.第2部分:影象位置和記錄方法 |
Micrographics; Vocabulary; Part 02: Image positions and methods of recording |
| ISO 6196-3-1997 |
縮微攝影技術詞匯.第3部分:膠片沖洗 |
Micrographics - Vocabulary - Part 03: Film processing |
| ISO 6196-4-1998 |
縮微攝影技術.詞匯.第4部分:材料和包裝 |
Micrographics - Vocabulary - Part 4: Materials and packaging |
| ISO 6196-5-1987 |
縮微攝影技術.詞匯.第5部分:影象質量.清晰度和檢驗.三種語言版本 |
Micrographics; Vocabulary; Part 05: Quality of images, legibility, inspection Trilingual edition |
| ISO 6196-6-1992 |
縮微攝影技術.詞匯.第6部分:設備 |
Micrographics; vocabulary; Part 06: Equipment |
| ISO 6196-7-1992 |
縮微攝影技術.詞匯.第7部分:計算機縮微技術 |
Micrographics; Vocabulary; Part 07: Computer micrographics |
| ISO 6196-8-1998 |
縮微攝影技術.詞匯.第8部分:應用 |
Micrographics - Vocabulary - Part 8: Use |
| ISO 6198-1993 |
縮微照相.透明縮微品閱讀器的性能特征 |
Micrographics; readers for transparent microforms; performance characteristics |
| ISO 6199-1991 |
縮微攝影技術.在16mm和35mm銀膠凝型縮微膠卷上的文件縮微攝影.操作規程 |
Micrographics; microfilmimg of documents on 16 mm and 35 mm silver-gelatin type microfilm; operating procedures |
| ISO 62-1999 |
塑料.吸水性的測定 |
Plastics - Determination of water absorption |
| ISO 6200-1999 |
縮微攝影技術.源文件的第一代銀色透明微型膠片.密度規范和試驗方法 |
Micrographics - First generation silver-gelatin microforms of source documents - Density specifications and method of measurement |
| ISO 6205-1988 |
內河航行船舶.客艙密封系統.基本技術要求 |
Inland navigation vessels; customs sealing systems; basic technical requirements |
| ISO 6206-1979 |
工業用化學制品.取樣.詞匯.兩種語言版 |
Chemical products for industrial use; Sampling; Vocabulary Bilingual edition |
| ISO 6207-1992 |
無縫鎳管和鎳合金管 |
Seamless nickel and nickel alloy tube |
| ISO 6208-1992 |
鎳和鎳合金扳.薄扳和帶材 |
Nickel and nickel alloy plate, sheet and strip |
| ISO 6209-1988 |
橡膠配方配合劑.炭黑.可萃取物溶劑的測定 |
Rubber compounding ingredients; carbon black; determination of solvent extractable material |
| ISO 621-1981 |
錳礦石.金屬鐵含量(不超過2-0/0)的測定.磺基水楊酸光度測定法 |
Manganese ores; Determination of metallic iron content (metallic iron content not exceeding 2 %); Sulphosalicylic acid photometric method |
| ISO 6210-1-1991 |
機器人電阻焊槍氣瓶.第1部分:一般要求 |
Cylinders for robot resistance welding guns; part 1: general requirements |
| ISO 6216-1980 |
造船.內河航行.領航船.分類和基本要求 |
Shipbuilding; Inland navigation; Pilot craft; Classification and basic requirements |
| ISO 6217-1982 |
造船.內河航行.領航船.識別涂色和標記 |
Shipbuilding; Inland navigation; Pilot craft; Identification painting and inscriptions |
| ISO 6218-1981 |
造船.內河航行.推進式駁船的連接用絞車.主要尺寸 |
Shipbuilding; Inland navigation; Coupling winches for push tows; Main dimensions |
| ISO 6219-1983 |
造船.內河船舶.起錨機和起錨絞車 |
Shipbuilding; Inland vessels; Windlasses and anchor capstans |
| ISO 622-1981 |
固體礦物燃料.磷含量的測定.還原磷鉬酸鹽光度法 |
Solid mineral fuels; Determination of phorphorus content; Reduced molybdophosphate photometric method |
| ISO 6222-1999 |
水質.可培養微生物的計數.通過對營養瓊脂培養基培養的計群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium |
| ISO 6224-1995 |
輸水通用織物增強的塑料軟管.規范 |
Plastics hoses, textile-reinforced, for general-purpose water applications - Specification |
| ISO 6225-1-1984 |
天然生橡膠.蓖麻油含量的測定.第1部分:蓖麻油甘油脂含量的測定.薄層色譜光度法 |
Rubber, raw, natural; Determination of castor oil content; Part 1 : Determination of castor oil glycerides content; Thin layer chromatographic method |
| ISO 6225-2-1990 |
天然生橡膠.蓖麻油含量的測定.第2部分:蓖麻酸總含量的測定.氣相色譜法 |
Rubber, raw, natural; determination of castor oil content; part 2: determination of total ricinoleic acid content by gas chromatography |
| ISO 6227-1982 |
工業用化學制品.測定氯離子的一般方法.電勢測定法 |
Chemical products for industrial use; General method for determination of chloride ions; Potentiometric method |
| ISO 6228-1980 |
工業用化學制品.通過還原和滴定分析法測定微量硫化合物(如硫酸鹽)的一般方法 |
Chemical products for industrial use; General method for determination of traces of sulphur compounds, as sulphate, by reduction and titrimetry |
| ISO 6229-1980 |
工業用六氟硅酸鈉.游離二氧化硅含量的測定.重量分析法 |
Sodium hexafluorosilicate for industrial use; Determination of free silica content; Gravimetric method |
| ISO 623-1974 |
紙和紙板.硬紙夾和卷宗.尺寸 |
Paper and board; Folders and files; Sizes |
| ISO 6230-1989 |
錳礦石.用篩分法測定粒度分配 |
Manganese ores; determination of size distribution by sieving |
| ISO 6233-1983 |
錳礦石和錳精礦.鈣和鎂含量的測定.乙二胺四乙酸(EDTA)滴定法 |
Manganese ores and concentrates; Determination of calcium and magnesium contents; EDTA titrimetric method |
| ISO 6234-1981 |
銀行業務.認可印鑒冊及其縮微膠片的顯示 |
Bank operations; Authorized signature lists and their representation on microfiche |
| ISO 6235-1995 |
生橡膠.聚苯乙烯塊含量的測定.臭氧分解法 |
Rubber, raw - Determination of block polystyrene content - Ozonolysis method |
| ISO 6237-1987 |
粘合劑.木材與木材粘結劑.用拉伸負荷測定剪切強度 |
Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by tensile loading |
| ISO 6237-2003 |
粘合劑.木材與木材粘結體.用拉伸負荷測定剪切強度 |
(Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading ) |
| ISO 6237-2003 |
粘合劑.木材與木材粘結體.用拉伸負荷測定剪切強度 |
|
| ISO 6238-2001 |
粘合劑.木材與木材的粘合劑.用壓縮負荷測定剪切強度 |
Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading |
| ISO 6240-1980 |
建筑物性能標準.內容和說明 |
Performance standards in building; Contents and presentation |
| ISO 6241-1984 |
建筑物性能標準.標準的制定原則和所考慮的因素 |
Performance standards in building; Principles for their preparation and factors to be considered |
| ISO 6242-1-1992 |
建筑結構.用戶要求的表示法.第1部分:熱量的要求 |
Building construction; expression of users` requirements; part 1: thermal requirements |
| ISO 6242-2-1992 |
建筑結構.用戶要求的表示法.第2部分:空氣純度要求 |
Building construction; expression of users` requirements; part 2: air purity requirements |
| ISO 6242-3-1992 |
建筑結構.用戶要求的表示法.第3部分:聲學要求 |
Building construction; expression of users` requirements; part 3: acoustical requirements |
| ISO 6243-1997 |
建筑設計氣候.符號的提案系統 |
Climatic data for building design - Proposed system of symbols |
| ISO 6244-1982 |
石油蠟和礦脂.滴熔點的測定 |
Petroleum waxes and petrolatums; Determination of drop melting point |
| ISO 6245-2001 |
石油產品.灰分的測定 |
Petroleum products - Determination of ash |
| ISO 6246 Technical Corrigendum 1-1998 |
石油產品.輕質和中度餾出燃料的含膠量.噴射蒸發法.技術勘誤1 |
Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method; Technical Corrigendum 1 |
| ISO 6246-1995 |
石油產品.輕度和中度蒸餾燃料的膠含量.噴射蒸發法 |
Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method |
| ISO 6247 Technical Corrigendum 1-1999 |
石油產品.潤滑油發泡特性的測定.技術勘誤1 |
Petroleum products - Determination of foaming characteristics of lubricating oils; Technical Corrigendum 1 |
| ISO 6247-1998 |
石油產品.潤滑油發泡特性的測定 |
Petroleum products - Determination of foaming characteristics of lubricating oils |
| ISO 6249-1999 |
石油產品.燃?xì)廨啓C(jī)燃料的熱氧化穩定性的測定.JFTOT法 |
Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method |
| ISO 625 Technical Corrigendum 1-1996 |
固體礦物燃料.碳和氫含量的測定.李比希(Liebig)法.技術勘誤1 |
Solid mineral fuels - Determination of carbon and hydrogen - Liebig method; Technical Corrigendum 1 |
| ISO 625-1996 |
固體礦物燃料.碳和氫含量的測定.李比希氏法 |
Solid mineral fuels - Determination of carbon and hydrogen - Liebig method |
| ISO 6250-1997 |
石油產品.航空燃料的水反應的測定 |
Petroleum products - Determination of the water reaction of aviation fuels |
| ISO 6251-1996 |
液化石油氣.對銅的腐蝕性.銅片試驗 |
Liquefied petroleum gases - Corrosiveness to copper - Copper strip test |
| ISO 6252-1992 |
塑料.環境應力破裂(ESC)測定.恒定-拉伸-應力法 |
Plastics; determination of Environmental Stress Cracking (ESC); constant-tensile-stress method |
| ISO 6255-1997 |
轎車.轎車后窗洗滌和擦拭系統.試驗方法 |
Passenger cars - Rear-window washing and wiping systems - Test methods |
| ISO 6257-2002 |
鋁生產用碳素材料.電極用瀝青.取樣 |
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling |
| ISO 6258-1985 |
核電站.防地震的設計 |
Nuclear power plants; Design against seismic hazards |
| ISO 6259-1-1997 |
熱塑管.拉伸特性的測定.第1部分:通用試驗方法 |
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method |
| ISO 6259-2-1997 |
熱塑管.拉伸特性的測定.未增塑聚氯乙烯(PVC-U),氯化聚氯乙烯(PVC-C)和耐沖擊聚氯乙烯(PVC-HI)制管 |
Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI) |
| ISO 6259-3-1997 |
熱塑管.拉伸特性的測定.第3部分:聚烯烴管 |
Thermoplastic pipes - Determination of tensile properties - Part 3: Polyolefin pipes |
| ISO 6260-1984 |
郵匯付款單 |
Mail payment orders |
| ISO 6261-1995 |
配用于可轉位刀片的鏜桿(有柱形刀柄的刀具夾).名稱與符號 |
Boring bars (tool holders with cylindrical shank) for indexable inserts - Designation |
| ISO 6262-1-1982 |
配用于可轉位刀片的端銑刀.第1部分:扁平直柄端銑刀 |
End mills with indexable inserts; Part 1: End mills with flatted parallel shank |
| ISO 6262-2-1982 |
配用于可轉位刀片的端銑刀.第2部分:莫氏錐柄端銑刀 |
End mills with indexable inserts; part 2: End mills with Morse taper shank |
| ISO 6263-1997 |
液壓傳動.補償式流量控制閥.裝配面 |
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| ISO 6264-1998 |
液壓傳動.減壓閥.裝配面 |
Hydraulic fluid power - Pressure-relief valves - Mounting surfaces |
| ISO 6265-1992 |
高山雪橇.畸形負荷和斷裂頁荷測定 |
Alpine skis; determination of deformation load and breaking load |
| ISO 6266-1980 |
高山雪橇.疲勞指數的測定.周期性載荷試驗 |
Alpine skis; Determination of fatigue indexes; Cyclic loading test |
| ISO 6267-1980 |
高山雪橇.彎曲振動的測量 |
Alpine skis; Measurement of bending vibrations |
| ISO 6270-1-1998 |
涂料和清漆.耐濕度的測定.第1部分:連續冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation |
| ISO 6271-1997 |
透明液體.用鉑鈷標度評定顏色 |
Clear liquids - Estimation of colour by the platinum-cobalt scale |
| ISO 6272-1-2002 |
涂料和清漆.快速毀壞(抗沖擊)試驗.第1部分:大面積砸痕的落錘試驗 |
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter |
| ISO 6272-2-2002 |
涂料和清漆.快速毀壞(抗沖擊)試驗.第2部分:小面積砸痕的落錘試驗 |
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter |
| ISO 6274-1982 |
混凝土.集料的篩分析 |
Concrete; Sieve analysis of aggregates |
| ISO 6275-1982 |
凝固的混凝土.比重的測定 |
Concrete, hardened; Determination of density |
| ISO 6276-1982 |
壓實的新攪拌混凝土.比重的測定 |
Concrete, compacted fresh; Determination of density |
| ISO 6278-1980 |
滾針軸承.滾道滾針.外形尺寸 |
Needle roller bearings; Track rollers; Boundary dimensions |
| ISO 6279-1979 |
滑動軸承.整體軸承用鋁合金 |
Plain bearings; Aluminium alloy for solid bearings |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com