標準號 |
中文名稱 |
英文名稱 |
| prEN ISO 16408-2003 |
牙科學口腔衛生用品口腔清洗 |
Dentistry - Oral hygiene products - Oral rinses (ISO/DIS 16408:2003) |
| prEN ISO 16484-1-1999 |
建筑物控制系統第1部分：概述與定義 |
Building control systems - Part 1: Overview and definitions (ISO/DIS 16484-1:1999) |
| prEN ISO 16484-2-2003 |
建筑物控制系統第2部分：加熱、通風與空調(HVAC)控制系統功能度 |
Building automation and control systems (BACS) - Part 2: Hardware (ISO/FDIS 16484-2:2003) |
| prEN ISO 16671-2003 |
眼科植入物眼外科清洗液 |
Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO 16671:2003) |
| prEN ISO 16744-2003 |
牙科學固定牙齒復原用堿金屬材料 |
Dentistry - Base metal materials for fixed dental restorations (ISO/FDIS 16744:2003) |
| prEN ISO 16851-2003 |
織物傳輸帶環形傳輸帶凈長度的測試方法 |
Textile conveyor belts - Method of test for the determination of the net length of an endless (spliced) conveyor belt (ISO/FDIS 16851:2003) |
| prEN ISO 17249-2000 |
抗鏈鋸鋸割的安全鞋襪 |
Safety footwear with resistance to chain saw cutting (ISO/DIS 17249:2000) |
| prEN ISO 17250-2000 |
耐火焰的安全鞋襪 |
Safety footwear with resistance to fire-fighting hazards (ISO/DIS 17250:2000) |
| prEN ISO 17292-2002 |
石油、石油化工及相關工業用金屬球閥 |
Metal ball valves for petroleum, petrochemical and allied industries (ISO/DIS 17292:2002) / Note: Endorsement notice |
| prEN ISO 1735-2002 |
干酪及融化干酪制品脂肪含量的測定重量分析法(參照法) |
Cheese and processed cheese products - Determination of fat content - Gravimetric method (Reference method) (ISO/DIS 1735:2002) / Note: Endorsement notice |
| prEN ISO 17624-2001 |
聲學用聲屏法控制辦公室及工作間噪聲的指南 |
Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO/DIS 17624:2001) |
| prEN ISO 17641-1-2000 |
金屬焊縫的無損檢查焊件的熱裂開檢查第1部分：總則 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 1: General (ISO/DIS 17641-1:2000) |
| prEN ISO 17641-2-2000 |
金屬焊縫的無損檢查焊件的熱裂開檢查第2部分：自約束檢查 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 2: Self-restraint tests (ISO/DIS 17641-2:2000) |
| prEN ISO 17641-3-2000 |
金屬焊縫的無損檢查焊件的熱裂開檢查第3部分：外加荷載檢查 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 3: Externally loaded tests (ISO/DIS 17641-3:2000) |
| prEN ISO 17642-1-2000 |
金屬焊縫的無損檢查焊件的冷裂開檢查第1部分：總則 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 1: General |
| prEN ISO 17642-2-2000 |
金屬焊縫的無損檢查焊件的冷裂開檢查第2部分：自約束檢查 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 2: Self-restraint tests |
| prEN ISO 17642-3-2000 |
金屬焊縫的無損檢查焊件的冷裂開檢查第3部分：外加荷載檢查 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 3: Externally loaded tests |
| prEN ISO 17660-2002 |
鋼筋的焊接 |
Welding of reinforcing steel (ISO/DIS 17660:2002) |
| prEN ISO 17662-2001 |
焊接包括輔助加工在內的焊接設備的校正、鑒定及確認 |
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO/DIS 17662:2001) |
| prEN ISO 17664-2003 |
醫療裝置的消毒由制造商提供的可消毒裝置回收利用信息 |
Sterilization of medical devices - Information to be provided by the manufacturer for the reprocessing of resterilizable devices (ISO/FDIS 17664:2003) |
| prEN ISO 17707-2000 |
鞋鞋底的試驗方法抗撓曲性 |
Footwear - Test methods for outsoles - Flex resistance (ISO/DIS 17707:2000) |
| prEN ISO 17834-2003 |
熱噴涂高溫時防腐蝕及防氧化的保護涂料 |
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO/FDIS 17834:2003) |
| prEN ISO 17836-2002 |
熱噴涂沉積效率的測定 |
Determination of the deposition efficiency for thermal spaying (ISO/DIS 17836:2002) |
| prEN ISO 18265-2003 |
金屬材料硬度值的轉換 |
Metallic materials - Conversion of hardness values (ISO/FDIS 18265:2003) |
| prEN ISO 18273-2003 |
焊接消耗材料鋁及鋁合金電弧焊用絲狀電極、焊絲和焊條分類 |
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003) |
| prEN ISO 18274-2003 |
焊接消耗材料鎳及鎳合金電弧焊用絲狀及帶狀電極、焊絲和焊條分類 |
Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2003) |
| prEN ISO 18278-1-2002 |
電阻焊可焊性第1部分：金屬材料電阻點焊、縫焊和凸焊的可焊性評價 |
Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2002) |
| prEN ISO 18278-2-2002 |
電阻焊可焊性第2部分：點焊用鋼板的交替法評價 |
Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of steel sheets for spot welding (ISO/DIS 18278-2:2002) |
| prEN ISO 18279-2002 |
釬焊釬焊焊縫的缺陷 |
Brazing - Imperfections in brazed joints (ISO/FDIS 18279:2002) |
| prEN ISO 18691-2002 |
專用安全鞋襪、防護鞋襪及職業和特殊職業鞋襪鞋帶 |
Safety, protective, occupational and specific job-related footwear for professional use - Shoe laces (ISO/DIS 18691:2002) |
| prEN ISO 19019-2002 |
遠洋船和造船技術規劃、實施及報告密封試驗 |
Sea-going vessels and marine technology - Guide for planning, carrying out and reporting seal trials (ISO/DIS 19019:2002) |
| prEN ISO 19439-2002 |
企業重組企業模式的框架 |
Enterprise integration - Framework for enterprise modelling (ISO/DIS 19439:2002) |
| prEN ISO 1968-2003 |
纖維繩索和繩索制品詞匯 |
Fibre ropes and cordage - Terms and Definitions (ISO/FDIS 1968:2003) |
| prEN ISO 19840-2003 |
油漆和清漆用防護漆對鋼結構粗表面進行防腐干膜厚度的測量及驗收標準 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003) |
| prEN ISO 19953-2003 |
鞋襪鞋跟的試驗方法抗橫向沖擊性 |
Footwear - Test methods for heels - Resistance to lateral impact (ISO/FDIS 19953:2003) |
| prEN ISO 19956-2002 |
鞋襪鞋跟的試驗方法抗疲勞性 |
Footwear - Test methods for heels - Fatigue resistance (ISO/DIS 19956:2002) |
| prEN ISO 19957-2002 |
鞋襪鞋跟的試驗方法鞋跟釘?shù)母街?/td>
| Footwear - Test methods for heels - Heel pin holding strength (ISO/DIS 19957:2002) |
| prEN ISO 19958-2003 |
鞋襪鞋跟和鞋墊(top piece)的試驗方法鞋墊附著力 |
Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO/FDIS 19958:2003) |
| prEN ISO 20344-2003 |
專用安全鞋襪、防護鞋襪及職業和特殊職業鞋襪的試驗方法 |
Personal protective equipment - Test methods for footwear (ISO/FDIS 20344:2003) / Note: Intended as replacement for EN 344-1 (1992-11). |
| prEN ISO 20345-2003 |
專用安全鞋襪規范 |
Personal protective equipment - Safety footwear (ISO/FDIS 20345:2003) / Note: Intended as replacement for EN 345-1 (1992-11), EN 345-2 (1996-07). |
| prEN ISO 20346-2003 |
專用防護鞋襪規范 |
Personal protective equipment - Protective footwear (ISO/FDIS 20346:2003) / Note: Intended as replacement for EN 346-1 (1992-11), EN 346-2 (1996-07). |
| prEN ISO 20347-2003 |
專用職業鞋襪規范 |
Personal protective equipment - Occupational footwear (ISO/FDIS 20347:2003) |
| prEN ISO 20623-2003 |
石油和石油產品液態石油產品的耐板壓特性和抗磨特性的測定四球法(歐洲條件) |
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO/FDIS 20623:2003) |
| prEN ISO 20643-2002 |
手持式或手控式機械通過手傳遞的震動在握緊處震動的測量 |
Hand-transmitted vibration from hand-held or hand-guided machinery - Measurement of vibration at the grip surface (ISO/DIS 20643:2002) |
| prEN ISO 20764-2003 |
石油和石油產品測定水含量用高沸點液體試驗樣品的制備氮清除法 |
Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO/FDIS 20764:2003) |
| prEN ISO 20783-1-2003 |
石油及石油產品阻燃液乳化穩定性的測定第1部分：HFAE類流體 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO/FDIS 20783-1:2003) |
| prEN ISO 20783-2-2003 |
石油及石油產品阻燃液乳化穩定性的測定第2部分：HFB類流體 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO/FDIS 20783-2:2003) |
| prEN ISO 20844-2002 |
石油及石油產品用柴油機噴嘴測定含聚合物油類的剪切穩定性 |
Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
| prEN ISO 20846-2002 |
石油及石油產品液態石油產品總硫量的測定紫外線熒光法 |
Petroleum products - Determination of total sulfur content of liquid petroleum products - Ultraviolet fluorescence method (ISO/DIS 20846:2002) / Note: Endorsement notice |
| prEN ISO 20847-2002 |
石油產品機動車燃料含硫量的測定能量分散X射線熒光光譜法 |
Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO/DIS 20847:2002) / Note: Endorsement notice |
| prEN ISO 20884-2002 |
石油產品機動車燃料含硫量的測定波長分散X射線熒光光譜法 |
Petroleum products - Determination of low sulfur content of automotive fuels - Wavelenght-dispersive X-ray fluorescence spectrometry (ISO/DIS 20884:2002) / Note: Endorsement notice |
| prEN ISO 21007-1-2002 |
可移動氣瓶 采用射頻識別技術的識別和標志 第1部分：參考結構和術語 |
Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology (ISO/DIS 21007-1:2002) |
| prEN ISO 21007-2-2002 |
可移動氣瓶 采用射頻識別技術的識別和標志 第1部分：數據機構的框架 |
Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency (ISO/DIS 21007-2:2002) |
| prEN ISO 21267-1-2003 |
技術制圖鐵路上的應用第1部分：一般原則 |
Technical drawings - Railway applications - Part 1: General principles (ISO/FDIS 21267-1:2003) |
| prEN ISO 21267-2-2003 |
技術制圖鐵路上的應用第2部分：零件目錄 |
Technical drawings - Railway applications - Part 2: Parts lists (ISO/FDIS 21267-2:2003) |
| prEN ISO 21267-3-2003 |
技術制圖鐵路上的應用第3部分：技術文件的修改 |
Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents (ISO/FDIS 21267-3:2003) |
| prEN ISO 21572-2003 |
飼料原生改良有機物及衍生制品的檢查蛋白質基法 |
Foodstuffs - Methods for the detection of genetically modified organisms and derived products - Protein based methods (ISO/FDIS 21572:2003) |
| prEN ISO 21787-2001 |
工業閥門熱塑塑料制球閥 |
Industrial valves - Globe valves of thermoplastic materials (ISO/DIS 21787:2001) |
| prEN ISO 21868-2002 |
紡織地面覆蓋物維護及清洗指南 |
Textile floor coverings - Guidelines for maintenance and cleaning (ISO/DIS 21868:2002) |
| prEN ISO 2360-2003 |
非磁性基金屬上非導電涂層鍍層厚度的測量振幅靈敏的渦流法 |
Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO/FDIS 2360:2003) / Note: Intended as replacement for EN ISO 2360 (1995-01). |
| prEN ISO 2580-2-2003 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 2580-2:2003) / Note: Intended as replacement for EN ISO 2580-2 (1999-05). |
| prEN ISO 2692-2002 |
技術制圖幾何公差最大實體原則 |
Technical drawings - Geometrical tolerancing - Maximum material principle (ISO/DIS 2692:2002) |
| prEN ISO 2722-1997 |
釉瓷和搪瓷室溫下耐檸檬酸的測定 |
Vitreous and porcelain enamels - Determination of resistance to citric acid at room temperature (ISO 2722:1997) |
| prEN ISO 2801-1997 |
阻熱和隔熱服防護服的選擇、保存和使用的一般建議 |
Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing (ISO/FDIS 2801:1997) |
| prEN ISO 2810-2002 |
色漆和清漆天然老化 |
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO/DIS 2810:12002) |
| prEN ISO 2897-2-2003 |
塑料耐沖擊聚苯乙烯(PS-I)模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 2897-2:2003) / Note: Intended as replacement for EN ISO 2897-2 (1999-05). |
| prEN ISO 306-2002 |
塑料熱塑性材料維卡軟化溫度的測定 |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO/DIS 306:2002) |
| prEN ISO 3095-2001 |
鐵路應用 聲學有軌車輛發射的噪聲的測量 |
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO/DIS 3095:2001) |
| prEN ISO 3126-2002 |
塑料管材塑料管成分測量與尺寸的測定 |
Plastics piping systems - Plastics components - Determination of dimensions (ISO/FDIS 3126:2002) |
| prEN ISO 3170-2002 |
石油液體人工采樣 |
Petroleum liquids - Manual sampling (ISO/DIS 3170:2002) |
| prEN ISO 3327-2001 |
硬質金屬橫向斷裂強度的測定 |
Hardmetals - Determination of transverse rupture strength (ISO/DIS 3327:2001) |
| prEN ISO 3381-2001 |
鐵路應用聲學有軌車輛內的噪音測量 |
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO/DIS 3381:2001) |
| prEN ISO 3471-1998 |
土方機械翻車保護結構實驗室試驗和性能要求 |
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994 + Amendment 1:1997) |
| prEN ISO 3635-1996 |
服裝的尺寸標識定義和人體的測量步驟 |
Size designation of clothes - Definitions and body measurement procedure (includes ISO 3635:1981/DAM1) |
| prEN ISO 3745-2003 |
聲學聲壓法測定噪聲源的聲功率級消聲室和半消聲室精密法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO/FDIS 3745:2003) |
| prEN ISO 3758-2002 |
紡織品使用符號的保養標簽規則 |
Textiles - Care labelling code using symbols (ISO/DIS 3758:2002) |
| prEN ISO 376-2002 |
金屬材料單軸試驗機校驗用校力檢驗儀的校準 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO/DIS 376:2002) |
| prEN ISO 3766-2003 |
建筑工程制圖鋼筋混凝土的簡化畫法 |
Construction drawings - Simplified representation of concrete reinforcement (ISO/FDIS 3766:2003) / Note: Intended as replacement for EN ISO 3766 (1999-07). |
| prEN ISO 3838-2002 |
原油和液體或固體石油產品密度或相對密度的測定毛細管塞比重瓶和帶刻度雙毛細管比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO/DIS 3838:2002) |
| prEN ISO 389-8-2001 |
聲學校正聽力設備的基準零級第8部分：純音和頭戴式耳機用的基準等效閾聲壓級 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO/DIS 389-8:2001) |
| prEN ISO 407-2001 |
小型醫用氣瓶針導軛式閥連接 |
Small medical gas cylinders - PIN-index yoke-type valve connections (ISO/DIS 407:2001) |
| prEN ISO 4126-1-2003 |
防止過壓防護的安全裝置 第1部分：安全閥 |
Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003) |
| prEN ISO 4126-4-2003 |
保護額外壓力的安全設備第4部分：飛行員操作安全閥 |
Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003) |
| prEN ISO 4126-5-2003 |
防止過壓防護的安全裝置 第5部分：受控安全減壓系統 |
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO/FDIS 4126-5:2003) |
| prEN ISO 4126-6-2002 |
保護額外壓力的安全設備第6部分：防爆膜安全設備的應用,選擇與安裝 |
Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO/FDIS 4126-6:2002) |
| prEN ISO 4126-7-2003 |
防止過壓防護的安全裝置 第7部分：通用數據 |
Safety devices for protection against excessive pressure - Part 7: Common data (ISO/FDIS 4126-7:2003) |
| prEN ISO 4526-2002 |
金屬覆蓋層工程用鎳電鍍層 |
Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO/DIS 4526:2002) |
| prEN ISO 463-2003 |
產品幾何技術規范(GPS)尺寸測量?jī)x器：測微儀設計與度量衡學的要求 |
Geometrical product specification (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO/DIS 463:2003) |
| prEN ISO 4934-2003 |
鋼和鑄鐵硫含量的測定重量分析法 |
Steel and iron - Determination of sulfur content - Gravimetric method (ISO/FDIS 4934:2003) / Note: Intended as replacement for EN 24934 (1989-05). |
| prEN ISO 5263-3-2003 |
prEN ISO 5263-3-2003 |
|
| prEN ISO 544-2003 |
焊接消耗品焊接填縫金屬的交貨技術條件產品型號、尺寸、公差和標記 |
Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings (ISO/FDIS 544:2003) |
| prEN ISO 5534-2002 |
干酪和融化干酪制品總固含量的測定（參照法） |
Cheese and processed cheese products - Determination of total solids content (Reference method) (ISO/DIS 5534:2002) / Note: Endorsement notice |
| prEN ISO 5667-3-2003 |
水質采樣第3部分：樣品保存和處理方法指南 |
Water quality - Sampling - Part 3: Guidance on the preservation and handling of samples (ISO/FDIS 5667-3:2003) / Note: Intended as replacement for prEN ISO 5667-3 (2002-02). |
| prEN ISO 5674-2001 |
農林用拖拉機和機械動力輸出(PTO)軸護罩強度與磨損試驗 |
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests title (ISO/DIS 5674:2001) |
| prEN ISO 580-2002 |
塑料管與管道系統注模制熱塑性塑料配件加熱反應的視覺評估方法 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO/DIS 580:2002) |
| prEN ISO 5817-2003 |
焊接鋼、鎳、鈦與其合金熔化焊接接合不理想性質量級別 |
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO/FDIS 5817:2003) |
| prEN ISO 6134-1999 |
飽和水蒸汽橡膠軟管和軟管組件規范 |
Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:1999) |
| prEN ISO 6158-2002 |
金屬覆蓋層工程用鉻電鍍層 |
Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO/DIS 6158:2002) |
| prEN ISO 6218-2002 |
內河船舶推拖用手操作連接設備安全要求與主要尺寸 |
Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO/DIS 6218:2002) |
| prEN ISO 6385-2003 |
工作系統設計的人類工效學原則 |
Ergonomic principles in the design of work systems (ISO/FDIS 6385:2003) / Note: Intended as replacement for ENV 26385 (1990-06). |
| prEN ISO 6402-2-2003 |
塑料丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinatio |
| prEN ISO 6710-2002 |
一次性使用靜脈血樣采集容器 |
Single-use containers for venous blood specimen collection (ISO/DIS 6710:2002) |
| prEN ISO 6807-2003 |
旋轉式鉆探和振動用橡膠軟管和軟管組件規范 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO/FDIS 6807:2003) |
| prEN ISO 6826-1994 |
往復式內燃機防火 |
Reciprocating internal combustion engines - Fire protection (ISO/DIS 6826:1994) |
| prEN ISO 7-2-2001 |
用螺紋密封的管螺紋第2部分：用極限量規檢驗 |
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges (ISO 7-2:2000) |
| prEN ISO 7200-1-1999 |
技術產品文件文件標題和標題欄第1部分：一般結構和內容 |
Technical product documentation - Document headers and title blocks - Part 1: General structure and content (ISO/DIS 7200-1:1999) |
| prEN ISO 7200-2-1999 |
術產品文件文件標題和標題欄第2部分：機械工程的標題欄 |
Technical product documentation - Document headers and title blocks - Part 2: Title blocks for mechanical engineering (ISO/DIS 7200-2:1999) |
| prEN ISO 7200-2002 |
技術制圖標題欄 |
Technical product documentation - Data fields in title blocks and document headers (ISO/DIS 7200:2002) |
| prEN ISO 7369-2002 |
管道工程金屬軟管和軟管裝備詞匯 |
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO/DIS 7369:2002) |
| prEN ISO 7458-2003 |
玻璃容器耐內壓力試驗方法 |
Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2003) |
| prEN ISO 7459-2003 |
玻璃容器抗熱震性和熱震耐久性試驗方法 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO/FDIS 7459:2003) |
| prEN ISO 75-1-2003 |
塑料載荷下?lián)锨鷾囟鹊臏y(cè)定第1部分：一般試驗方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO/FDIS 75-1:2003) / Note: Intended as replacement for EN ISO 75-1 (1996-02). |
| prEN ISO 75-2-2003 |
塑料載荷下?lián)锨鷾囟鹊臏y(cè)定第2部分：塑料與硬橡膠 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibre-reinforced composites (ISO/FDIS 75-2:2003) / Note: Intended as replacement for EN ISO 75-2 (1996-02). |
| prEN ISO 75-3-2003 |
塑料載荷下?lián)锨鷾囟鹊臏y(cè)定第3部分：高強度熱固性疊層板和長纖維增強塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO/FDIS 75-3:2003) / Note: Intended as replacement for EN ISO 75-3 (1996-02). |
| prEN ISO 7500-1-2001 |
料靜態單軸向試驗機的驗證第1部分：拉伸／壓縮試驗機力測量系統的驗證和校正 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO/DIS 7500-1:2001) |
| prEN ISO 7539-7-2002 |
金屬與合金的腐蝕應力腐蝕試驗第7部分：慢速率應力試驗 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO/DIS 7539-7:2002) |
| prEN ISO 760-1995 |
水的測定卡爾．費休法(通用方法) |
Determination of water - Karl Fischer method (General method) (ISO 760:1978) |
| prEN ISO 7686-2003 |
塑料管材與管件不透明度測定 |
Plastics pipes and fittings - Determination of opacity (ISO/DIS 7686:2003) / Note: Intended as replacement for EN 578 (1993-07). |
| prEN ISO 7827-1995 |
水質在含水介質中對有機化合物的“極限”有氧生物降解能力的評估溶解有機碳分析方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994) |
| prEN ISO 7864-1995 |
一次性使用無菌皮下注射器 |
Sterile hypodermic needles for single use (ISO 7864:1993) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com