標準號 |
中文名稱 |
英文名稱 |
| ISO 7591-1982 |
道路車輛.汽車和掛車的反光注冊牌照.規范 |
Road vehicles; Retro-reflective registration plates for motor vehicles and trailers; Specification |
| ISO 7592-1983 |
標定的圓鋼鏈節提升鏈條.正確使用和保養導則 |
Calibrated round steel link lifting chains; Guidelines to proper use and maintenance |
| ISO 7593-1986 |
非焊接裝配的鏈?zhǔn)剿骶?等級T(8) |
Chain slings assembled by methods other than welding; Grade T(8) |
| ISO 7595-1984 |
鋼索的套接步驟.熔融金屬的套接 |
Socketing procedures for wire ropes; Molten metal socketing |
| ISO 7597-1987 |
T(8)級的鋼鏈?zhǔn)褂玫膸Ъ夂铜h(huán)孔的鍛造起重鉤 |
Forged steel lifting hooks with point and eye for use with steel chains of grade T(8) |
| ISO 7598-1988 |
適于按照ISO 7/1攻絲用不銹鋼管 |
Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 7599-1983 |
鋁及其合金的陽極氧化.鋁的陽極氧化物鍍層的一般規范 |
Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium |
| ISO 76 AMD 1-1999 |
滾動軸承.額定靜負載.修改件1:附錄A(信息).基礎額定靜負載計算的不連續性 |
Rolling bearings - Static load ratings; Amendment 1: Annex A (informative) - Discontinuities in the calculation of basic static load ratings |
| ISO 76-1987 |
滾動軸承.額定靜負載 |
Rolling bearings; Static load ratings |
| ISO 760-1978 |
水的測定.卡爾費希爾(KarlFischer)法(一般方法) |
Determination of water; Karl Fischer method (General method) |
| ISO 7606-1988 |
造船.內河船.吃水表尺 |
Shipbuilding; inland navigation vessels; draught scales |
| ISO 7607-1984 |
造船.內河航行.多斗式挖泥船.挖斗容量標度 |
Shipbuilding; Inland navigation; Multi-bucket dredgers; Scale of bucket capacities |
| ISO 7608-1985 |
造船.內河航行.含油混合物和污水管接頭 |
Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water |
| ISO 7609-1985 |
香精油.在毛細管填料柱中用氣相色譜法分析.一般方法 |
Essential oils; Analysis by gas chromatography on capillary columns; General method |
| ISO 761-1977 |
工業用乙酸酐和丁醇.溴值的測定 |
Acetic anhydride and butan-1-ol for industrial use; Determination of bromine number |
| ISO 7611-1985 |
用機加工制取的檸檬油和橙葉油以及白檸檬油(橙花醛+香葉醛)含量的測定毛細管色相色譜法 |
Oils of lemon and petitgrain citronnier, and oil of lime obtained by a mechanical process; Determination of citral (neral + geranial) content; Gas chromatographic method on capillary columns |
| ISO 7612-1994 |
柴油發動機.安裝直列式燃油噴射泵的基座 |
Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions |
| ISO 7616-1986 |
硬質泡沫塑料.在特定的載荷和溫度條件下壓縮蠕變的測定 |
Cellular plastics, rigid; Determination of compressive creep under specified load and temperature conditions |
| ISO 7617-1-2001 |
室內裝飾用塑料涂層織物.第1部分:聚氯乙烯涂層針織物的規范 |
Plastics-coated fabrics for upholstery - Part 1: Specification for PVC-coated knitted fabrics |
| ISO 7617-2-1994 |
塑料.室內裝飾用涂覆材料.第2部分:PVC涂覆編織物的規范 |
Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics |
| ISO 7617-2-2003 |
室內裝飾用塑料涂覆織物.第2部分:聚氯乙烯涂覆紡織品的規范 |
(Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics) |
| ISO 7617-2-2003 |
室內裝飾用塑料涂覆織物.第2部分:聚氯乙烯涂覆紡織品的規范 |
|
| ISO 7617-3-1988 |
塑料.室內裝飾用涂覆材料.第3部分:聚氨脂涂覆編織物規范 |
Plastics-coated fabrics for upholstery; part 3: specification for polyurethane-coated woven fabrics |
| ISO 7619-1-2004 |
硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第1部分:硬度計法(肖氏硬度) |
|
| ISO 7619-1-2004 |
硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第1部分:硬度計法(肖氏硬度) |
|
| ISO 7619-1997 |
橡膠.用袖珍硬度計測定壓痕硬度 |
Rubber - Determination of indentation hardness by means of pocket hardness meters |
| ISO 7619-2-2004 |
硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第2部分:IRHD袖珍測試計法 |
|
| ISO 7619-2-2004 |
硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第2部分:IRHD袖珍測試計法 |
|
| ISO 762-1982 |
水果和蔬菜制品.礦物雜質含量的測定 |
Fruit and vegetable products; Determination of mineral impurities content |
| ISO 762-2003 |
水果和蔬菜制品.礦物雜質含量的測定 |
(Fruit and vegetable products - Determination of mineral impurities content ) |
| ISO 762-2003 |
水果和蔬菜制品.礦物雜質含量的測定 |
|
| ISO 7620-1986 |
橡膠材料.耐化學性 |
Rubber materials; Chemical resistance |
| ISO 7622-1-1984 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第1部分:伸長的測量 |
Steel cord conveyor belts; Longitudinal traction test; Part 1 : Measurement of elongation |
| ISO 7622-2-1984 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第2部分:抗拉強度的測量 |
Steel cord conveyor belts; Longitudinal traction test; Part 2 : Measurement of tensile strength |
| ISO 7623-1996 |
鋼絲芯線輸送機皮帶.纜索涂層粘合力試驗.最初試驗和后期處理 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
| ISO 7624-1997 |
石油產品和潤滑劑.抑制礦物質渦輪機油.氧化穩定性的測定 |
Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
| ISO 7625-1983 |
不包括硬質合金的燒結金屬材料.測定碳含量用化學分析的樣品制備 |
Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content |
| ISO 7626-1-1986 |
振動和沖擊.機械靈活性的實驗測定.第1部分:基本定義和傳感器 |
Vibration and shock; Experimental determination of mechanical mobility; Part 1 : Basic definitions and transducers |
| ISO 7626-2-1990 |
振動和沖擊.力導納的實驗測定.第2部分:利用帶附加激振器的單點平移激發的測量 |
Vibration and shock; experimental determination of mechanical mobility; part 2: measurements using single-point translation excitation with an attached vibration exciter |
| ISO 7626-5-1994 |
振動和沖擊.力導納的實驗測定.第5部分:使用與結構不連接的激發器用沖擊激發法進行測量 |
Vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
| ISO 7627-1-1983 |
硬質合金.火焰原子吸收光譜法的化學分析.第1部分:一般要求 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 1 : General requirements |
| ISO 7627-2-1983 |
硬質合金.火焰原子吸收光譜法的化學分析.第2部分:含量為0.001%-0.02%(m/m)(平均克分子)的鈣、鉀、鎂和鈉含量的測定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 2 : Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) |
| ISO 7627-3-1983 |
硬質合金.火焰原子吸收光譜法的化學分析.第3部分:含量為0.01%-0.5%(m/m)(平均克分子)的鈷、鐵、錳和鎳含量的測定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 3 : Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-4-1983 |
硬質合金.火焰原子吸收光譜法的化學分析.第4部分:含量為0.01%—0.5%(m/m)(平均克分子)的鉬、鈦和釩含量的測定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 4 : Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-5-1983 |
硬質合金.火焰原子吸收光譜法的化學分析.第5部分:含量為0.5%—2%(m/m)(平均克分子)的鈷、鐵、錳、鉬、鎳、鈦和釩含量的測定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 5 : Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
| ISO 7627-6-1985 |
硬質合金.火焰原子吸收光譜法進行化學分析.第6部分:在0.0%-2%(m/m)范圍內的鉻含量的測定 |
Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 6 : Determination of chromium in contents from 0,01 to 2 % (m/m) |
| ISO 7628-1-1998 |
道路車輛.氣壓制動系統用熱塑管材.第1部分:尺寸和標記 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 1: Dimensions and marking |
| ISO 7628-2 Technical Corrigendum 1-1999 |
道路車輛.用于氣壓制動系統中的熱塑管材.第2部分:車輛固定和試驗方法.技術勘誤1 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods; Technical Corrigendum 1 |
| ISO 7628-2-1998 |
道路車輛.氣壓制動系統用熱塑管材.第2部分:車輛上的裝配及試驗方法 |
Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods |
| ISO 7629-1987 |
道路車輛.制動閘襯.圓形制動墊片.試驗后表面和材料傷殘的評定 |
Road vehicles; Brake linings; Disc brake pads; Evaluation of surface and material flaws after testing |
| ISO 763-1982 |
水果和蔬菜制品.鹽酸不溶性灰分的測定 |
Fruit and vegetable products; Determination of ash insoluble in hydrochloric acid |
| ISO 763-2003 |
水果和蔬菜制品.鹽酸不溶性灰分的測定 |
(Fruit and vegetable products - Determination of ash insoluble in hydrochloric acid ) |
| ISO 763-2003 |
水果和蔬菜制品.鹽酸不溶性灰分的測定 |
|
| ISO 7630-1985 |
道路車輛.使用石油基液壓制動液的鼓式輪閘液壓缸的彈性O(shè)形密封圈(最大工作溫度120℃) |
Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7631-1985 |
道路車輛.使用石油基液壓制動液的液壓制動系統液壓缸的彈性皮碗和密封墊圈(最大工作溫度120℃) |
Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7632-1985 |
道路車輛.使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊圈(最大工作溫度120℃) |
Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7633-1985 |
道路車輛.使用石油基液壓制動液的鼓式輪閘液壓缸的彈性保護罩(最大工作溫度120℃) |
Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7634-1995 |
牽引車.壓縮空氣制動系統.制動性能的測量 |
Towed road vehicles - Compressed-air braking systems - Measurement of braking performance |
| ISO 7634-2003 |
道路車輛.壓縮空氣制動系統.試驗程序 |
(Road vehicles - Compressed-air braking systems - Test procedures) |
| ISO 7634-2003 |
道路車輛.壓縮空氣制動系統.試驗程序 |
|
| ISO 7635-1991 |
道路車輛.氣動或充氣式液壓制動系統.制動性能的測量 |
Road vehicles; air or air over hydraulic braking systems; measurement of braking performance |
| ISO 7635-2003 |
道路車輛.機動車輛用氣壓或氣動-液壓制動系統(包括有電子控制功能的機動車輛).試驗規程 |
(Road vehicles - Air or air-over hydraulic braking systems for motor vehicles (including those with electronic control functions) - Test procedures ) |
| ISO 7635-2003 |
道路車輛.機動車輛用氣壓或氣動-液壓制動系統(包括有電子控制功能的機動車輛).試驗規程 |
|
| ISO 7636-1984 |
自行車和輕便摩托車車鈴.技術規范 |
Bells for bicycles and mopeds; Technical specifications |
| ISO 7637-1-2002 |
道路車輛.由傳導和耦合引起的電干擾.第1部分:定義和總則 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
| ISO 7637-2-1990 |
道路車輛.電導和耦合引起的電干擾.第2部分:標稱電源電壓24V的商用車輛.僅沿電源線的瞬間電導 |
Road vehicles; electrical disturbance by conduction and coupling; part 2: commercial vehicles with nominal 24 V supply voltage; electrical transient conduction along supply lines only |
| ISO 7637-2-2004 |
道路車輛.傳導和耦合引起的電干擾.第2部分:僅沿電源線瞬間電導 |
|
| ISO 7637-3 Technical Corrigendum 1-1995 |
道路車輛.電導和耦合引起的電干擾.第3部分:標稱電源電壓12V或24V的車輛.通過電容耦合和電感耦合經由線不同于電源線瞬間電傳輸.技術勘誤表1 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V and 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines; Technical Corrigendu |
| ISO 7637-3-1995 |
道路車輛.電導和耦合引起的電干擾.第3部分:標稱電源電壓12V或24V的車輛.通過電容耦合和電感耦合經由線不同于電源線瞬間電傳輸 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7638-1 Technical Corrigendum 1-1998 |
道路車輛.制動系統用電連接器.第1部分:24 V額定電源電壓用連接器.技術勘誤1 |
Road vehicles - Electrical connectors for braking systems - Part 1: Connectors for 24 V nominal supply voltage; Technical Corrigendum 1 |
| ISO 7638-1-1997 |
道路車輛.制動系統用電連接器.第1部分:24 V標稱電源電壓用連接器 |
Road vehicles - Electrical connectors for braking systems - Part 1: Connectors for 24 V nominal supply voltage |
| ISO 7638-1-2003 |
道路車輛.牽引車和掛車的電氣連接用連接器.第1部分:具有24V標稱電源電壓的車輛的制動系統和行駛系用連接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage ) |
| ISO 7638-1-2003 |
道路車輛.牽引車和掛車的電氣連接用連接器.第1部分:具有24V標稱電源電壓的車輛的制動系統和行駛系用連接器 |
|
| ISO 7638-2 Technical Corrigendum 1-1998 |
道路車輛.制動系統用電連接器.第2部分:12 V額定電源電壓用連接器.技術勘誤2 |
Road vehicles - Electrical connectors for braking systems - Part 2: Connectors for 12 V nominal supply voltage; Corrigendum 1 |
| ISO 7638-2-1997 |
道路車輛.制動系統用電連接器.第2部分:12 V標稱電源電壓用連接器 |
Road vehicles - Electrical connectors for braking systems - Part 2: Connectors for 12 V nominal supply voltage |
| ISO 7638-2-2003 |
道路車輛.牽引車和掛車的電氣連接用連接器.第2部分:具有12V標稱電源電壓的車輛的制動系統和行駛系用連接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage ) |
| ISO 7638-2-2003 |
道路車輛.牽引車和掛車的電氣連接用連接器.第2部分:具有12V標稱電源電壓的車輛的制動系統和行駛系用連接器 |
|
| ISO 7639-1985 |
道路車輛.故障診斷系統.圖形符號.兩種語言版 |
Road vehicles; Diagnostic systems; Graphical symbols Bilingual edition |
| ISO 764-2002 |
計時儀器.防磁表 |
Horology - Magnetic resistant watches |
| ISO 7641-1-1983 |
道路車輛.旅居車和輕型掛車.牽引桿的機械強度計算.第1部分:鋼牽引桿 |
Road vehicles; Caravans and light trailers; Calculation of the mechanical strength of the drawbar; Part 1 : Steel drawbars |
| ISO 7642-1991 |
旅居掛車和輕型掛車.具有超速控制閘的0類和0類掛車.制動閘慣量臺架試驗方法 |
Caravans and lights trailers; trailers of categories O and O with overrun brakes; inertia bench test methods for brakes |
| ISO 7643-1991 |
旅居掛車和輕型掛車.具有超速控制閘的O(1)類和O(2)類掛車.閘控制線性臺架試驗法 |
Caravans and light trailers; trailers of categories O and O with overrun brakes; linear bench test methods for brake controls |
| ISO 7646-1986 |
商業用車輛和公共汽車.齒輪箱法蘭.A型 |
Commercial vehicles and buses; Gearbox flanges; Type A |
| ISO 7647-1986 |
商業用車輛和公共汽車.齒輪箱法蘭.S型 |
Commercial vehicles and buses; Gearbox flanges; Type S |
| ISO 7648-1987 |
往復式內燃機飛輪殼.公稱尺寸和公差 |
Flywheel housings for reciprocating internal combustion engines; Nominal dimensions and tolerances |
| ISO 7649-1991 |
往復式內燃機離合器殼體.公稱尺寸和公差 |
Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances |
| ISO 765-1976 |
不用通俗名稱的農藥.三種語言版 |
Pesticides considered not to require common names Trilingual edition |
| ISO 7650 AMD 1-2001 |
商用車輛和公共汽車.1、2、3和4類起動發動機的安裝尺寸.修改件1 |
Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
| ISO 7650-1987 |
商業用車輛和公共汽車.1、2、3和4型起動電機的裝配尺寸 |
Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
| ISO 7651-1991 |
商業用車輛和公共汽車.1、2、3型交流發電機安裝尺寸 |
Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
| ISO 7652 AMD 1-1992 |
第1次修改 |
Road vehicles; base-mounted air compressors, single cylinder V-belt drive; mounting dimensions; amendment 1 |
| ISO 7652-1983 |
道路車輛.單缸三角皮帶傳動基座安裝的空氣壓縮機.安裝尺寸 |
Road vehicles; Base-mounted air compressors, single cylinder V-belt drive; Mounting dimensions |
| ISO 7653-1985 |
道路車輛.商業用車輛.動力輸出裝置(PTO)和輔助傳動機組之間的聯結器 |
Road vehicles; Commercial vehicles; Couplings between power take-offs (PTO) and ancillary driven units |
| ISO 7654-1998 |
道路車輛.柴油發動機用離心式燃油濾清器.裝配和連接尺寸 |
Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| ISO 7656-1993 |
商業用道路車輛.尺寸代碼 |
Commercial road vehicles; dimensional codes |
| ISO 7657-1995 |
管道工程.條繞式可曲撓金屬軟管的一般要求 |
Pipework - General requirements for stripwound flexible metal hoses |
| ISO 7658-1984 |
管道工程.條繞式柔性金屬軟管.特性試驗和驗證 |
Pipework; Stripwound flexible metal hoses; Testing and verification of characteristics |
| ISO 7660-1983 |
香精油.含有難于皂化的酯類香精油酯值的測定 |
Essential oils; Determination of ester value of oils containing difficult-to-saponify esters |
| ISO 7661-1984 |
航空航天.流體動力系統.按軸向校準的管道夾塊.設計標準和質量鑒定試驗.米制系列 |
Aerospace; Fluid systems; Clamp blocks for tube lines having axial alignment; Design standard and qualification testing; Metric series |
| ISO 7662-1988 |
橡膠和塑料管.內襯磨損的測定 |
Rubber and plastics hoses; determination of abrasion of lining |
| ISO 7663-1995 |
鹵化異丁烯一戊二烯橡膠(BIIR和CIIR).評估程序 |
Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures |
| ISO 7664-2000 |
生橡膠、天然橡膠和生合成橡膠.存儲通用指南 |
Rubber, raw, natural and raw synthetic - General guidance on storage |
| ISO 7665-1983 |
信息處理.信息交換用盒式軟磁盤的文件結構和標號 |
Information processing; File structure and labelling of flexible disk cartridges for information interchange |
| ISO 7668-1986 |
陽極化鋁和鋁合金.20°、45°、60°或85°角的鏡面反射和鏡面光澤的測量 |
Anodized aluminium and aluminium alloys; measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
| ISO 7671-1991 |
建筑物內污物和廢物排放(耐低溫和高溫)系統用聚丙烯管道和管配件(由彈性密封環連接).規范 |
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
| ISO 7671-2003 |
建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.聚丙烯(PP) |
(Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) ) |
| ISO 7671-2003 |
建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.聚丙烯(PP) |
|
| ISO 7675-1991 |
建筑物內污物和廢物排放(耐低溫和高溫)系統用聚氯乙烯管和配件.規范 |
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
| ISO 7675-2003 |
建筑物內污、廢水(低溫和高溫)排放用塑料管道系統.氯化聚氯乙烯 |
(Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)) |
| ISO 7675-2003 |
建筑物內污、廢水(低溫和高溫)排放用塑料管道系統.氯化聚氯乙烯 |
|
| ISO 768-1972 |
建筑用纖維板.彎曲強度的測定 |
Fibre building boards; Determination of bending strength |
| ISO 7682-1991 |
建筑物內污物和廢物排放(耐低溫和高溫)系統用丙烯晴/丁二烯/苯乙烯管和配件.規范 |
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
| ISO 7682-2003 |
建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯(ABS) |
(Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS) ) |
| ISO 7682-2003 |
建筑物內污、廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯(ABS) |
|
| ISO 7684-1997 |
塑料管系統.玻璃增強熱固性塑料(GRP)管.干燥條件下測定蠕變因素 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| ISO 7685-1998 |
塑料管道系統.玻璃增強熱固塑料(GRP)管.最初的指定塑料環硬度測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| ISO 7686-1992 |
塑料管和配件.不透明度.試驗方法 |
Plastics pipes and fittings; opacity; test method |
| ISO 7689-1988 |
航空航天.強度類別1100MPa和MJ螺紋的合金鋼螺栓.采購規格 |
Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 769-1972 |
建筑用纖維板.硬板和中硬板.浸水后吸水性和厚度膨脹的測定 |
Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water |
| ISO 7692-1983 |
鈦鐵.鈦含量的測定.滴定法 |
Ferrotitanium; Determination of titanium content; Titrimetric method |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com