標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 8986-2-2000 |
塑料.聚丁烯(PB)模塑和擠制材料.第2部分:試樣的制備和性能的測定.(包括修改件A1-2000) |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 8986-2:2000 |
| DIN EN ISO 8987-1998 |
塑料.酚醛樹脂.在B轉變試驗板上的活性測定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995); German version EN ISO 8987:1998 |
| DIN EN ISO 8987-2005 |
塑料.酚醛樹脂.在B轉變試驗板上的活化性能的測定 |
|
| DIN EN ISO 8988-1997 |
塑料.酚醛樹脂.六亞甲基四胺含量的測定.基耶達斯法和高氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995); German version EN ISO 8988:1997 |
| DIN EN ISO 8989-1998 |
塑料.酚醛樹脂.水的可混性的測定 |
Plastics - Phenolic resins - Determination of water miscibility (ISO 8989:1995); German version EN ISO 8989:1998 |
| DIN EN ISO 899-1-1997 |
塑料.蠕變的測定.第1部分:拉申蠕變 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:1993); German version EN ISO 899-1:1996 |
| DIN EN ISO 899-2-1997 |
塑料.蠕變性能的測定.第2部分:三點負載時彎曲蠕變 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:1993); German version EN ISO 899-2:1996 |
| DIN EN ISO 8990-1996 |
熱絕緣.穩定狀態中熱通過特性的測定.校正及屏蔽的隔熱箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996 |
| DIN EN ISO 8996-2005 |
熱環境的人類工效學.代謝率的測定 |
|
| DIN EN ISO 90-1-1999 |
輕型測量金屬容器.尺寸和容量測定的定義和方法.第1部分:頂開口罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997); German version EN ISO 90-1:1999 |
| DIN EN ISO 90-2-1999 |
輕型測量金屬容器.尺寸和容量測定的定義和方法.第2部分:通用容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997); German version EN ISO 90-2:1999 |
| DIN EN ISO 90-3-2001 |
輕型金屬容器.尺寸和容量測定的定義和方法.第3部分:氣溶膠罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001 |
| DIN EN ISO 9000 Berichtigung 1-2003 |
對DIN EN ISO 9000:2000-12的技術勘誤 |
Corrigenda to DIN EN ISO 9000:2000-12 |
| DIN EN ISO 9000-2000 |
質量管理體系.基礎和詞匯 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000); Trilingual version EN ISO 9000:2000 |
| DIN EN ISO 9000-2005 |
質量管理體系.基礎和詞匯 |
|
| DIN EN ISO 9000-3-1998 |
質量管理和質量保證標準.第3部分:ISO 9001-94計算機軟件的開發,供給,安裝和維護應用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997); Bilingual version EN ISO 9000-3:1997 |
| DIN EN ISO 9001-2000 |
質量管理體系.要求 |
Quality management systems - Requirements (ISO 9001:2000); Trilingual version EN ISO 9001:2000 |
| DIN EN ISO 9004-2000 |
質量管理體系.性能改進導則 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000); Trilingual version EN ISO 9004:2000 |
| DIN EN ISO 9013-1995 |
焊接和同類工藝.熱切割(氧/燃?xì)饣鹧?表面質量分類和尺寸公差 |
Welding and allied processes - Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces (ISO 9013:1992); German version EN ISO 9013:1995 |
| DIN EN ISO 9013-2003 |
熱切割.熱切割分類.產品幾何量技術規范和質量公差 |
(Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002); German version EN ISO 9013:2002) |
| DIN EN ISO 9018-2004 |
金屬材料焊縫的破壞試驗.十字形和搭接焊縫抗拉試驗 |
|
| DIN EN ISO 9020-1998 |
色漆和清漆用粘合劑.胺類樹脂的自由甲醛含量的測定 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996); German version EN ISO 9020:1998 |
| DIN EN ISO 9029-1995 |
原油.水分測定.蒸餾法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990); German version EN ISO 9029:1995 |
| DIN EN ISO 9038-2004 |
液體的耐燃性試驗 |
|
| DIN EN ISO 9047-1998 |
建筑結構.密封料.在不同溫度下的粘附作用/粘聚性能的測定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989); German version EN ISO 9047:1997 |
| DIN EN ISO 9054-2000 |
硬質泡沫塑料.自結皮高密度材料的試驗方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999 |
| DIN EN ISO 9073-2-1997 |
紡織品.非織物的試驗方法.第2部分:厚度的測定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (ISO 9073-2:1995); German version EN ISO 9073-2:1996 |
| DIN EN ISO 9073-4-1997 |
紡織品.非織物的試驗方法.第4部分:抗撕裂擴展強度的測定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997); German version EN ISO 9073-4:1997 |
| DIN EN ISO 9073-6-2003 |
紡織品.非織造品的試驗方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000); German version EN ISO 9073-6:2003 |
| DIN EN ISO 9073-7-1998 |
紡織品.非織造品的試驗方法.第7部分:彎曲長度的測定 |
Textiles - Test methods for non-wovens - Part 7: Determination of bending length (ISO 9073-7:1995); German version EN ISO 9073-7:1998 |
| DIN EN ISO 9073-8-1998 |
紡織品.非織造品的試驗方法.第8部分:液體滲透時間的測定(模擬尿) |
Textiles - Test methods for non-wovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995); German version EN ISO 9073-8:1998 |
| DIN EN ISO 9073-9-1998 |
紡織品.非織造品的試驗方法.第9部分:懸垂系數的測定 |
Textiles - Test methods for non-wovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995); German version EN ISO 9073-9:1998 |
| DIN EN ISO 9093-1-1998 |
小船.船底閥和船體外殼管配件.第1部分:金屬件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997 |
| DIN EN ISO 9093-2-2003 |
小艇.通海旋塞及貫穿艇體配件.第2部分:非金屬的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002); German version EN ISO 9093-2:2002 |
| DIN EN ISO 9094-1-2003 |
小艇.防火.第2部分:艇體長為15m及以下的小艇 |
(Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003); German version EN ISO 9094-1:2003) |
| DIN EN ISO 9094-2-2003 |
小艇.防火.第2部分:艇體長超過15m的小艇 |
(Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002); German version EN ISO 9094-2:2002) |
| DIN EN ISO 9097 Berichtigung 1-2001 |
DIN EN ISO 9097-1994的勘誤 |
Corrigendum to DIN EN ISO 9097:1994 (German version EN ISO 9097:1994/A1:2000) |
| DIN EN ISO 9097-1995 |
小型艦船.電扇 |
Small craft - Electric fans (ISO 9097:1991); German version EN ISO 9097:1994 |
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸緣瓶口.第5部分:普通規格43和48 |
|
| DIN EN ISO 9142-2004 |
膠粘劑.粘接接頭測試用標準試驗室老化條件的選擇指南 |
|
| DIN EN ISO 9163-1998 |
紡織玻璃纖維.粗紗.試樣的制造和浸漬粗紗拉伸強度的測定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996); German version EN ISO 9163:1998 |
| DIN EN ISO 9163-2005 |
紡織玻璃纖維.粗紗.試樣的制備和浸漬粗紗拉伸強度的測定 |
|
| DIN EN ISO 9167-1-1995 |
油菜種子.葡萄糖甙含量測定.第1部分:高性能液相色譜法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performance liquid chromatography (ISO 9167-1:1992); German version EN ISO 9167-1:1995 |
| DIN EN ISO 9167-2-1997 |
油菜種子.葡萄糖甙含量測定.第2部分:X線熒光分析法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994); German version EN ISO 9167-2:1997 |
| DIN EN ISO 9173-1-1995 |
拔牙鉗.第1部分:螺釘和鉸鏈接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991); German version EN ISO 9173-1:1995 |
| DIN EN ISO 9187-1-2004 |
醫用注射設備.第1部分:注射用安瓿瓶 |
|
| DIN EN ISO 9220-1995 |
金屬鍍層.鍍層厚度的測量.掃描電子顯微鏡法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994 |
| DIN EN ISO 9237-1995 |
紡織品.纖維織物透氣性的測定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 |
| DIN EN ISO 9239-1-2002 |
地板對燃燒試驗反應.第1部分:用輻射熱源測定燃燒特性 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002); German version EN ISO 9239-1:2002 |
| DIN EN ISO 9241-1-2002 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第1部分:概述 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction (ISO 9241-1:1997) (including Amendment AMD 1:2001); German version EN ISO 9241-1:1997 + A1:2001 |
| DIN EN ISO 9241-10-1996 |
用屏幕終端的辦公室工作的人類工效學要求.第10部分:對話結構的原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996); German version EN ISO 9241-10:1996 |
| DIN EN ISO 9241-11-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第11部分:使用性能指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998); German version EN ISO 9241-11:1998 |
| DIN EN ISO 9241-12-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第12部分:信息表示法 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); German version EN ISO 9241-12:1998 |
| DIN EN ISO 9241-13-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第13部分:用戶導則 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); German version EN ISO 9241-13:1998 |
| DIN EN ISO 9241-14-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第14部分:對話菜單 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); German version EN ISO 9241-14:1999 |
| DIN EN ISO 9241-15-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第15部分:通過命令語言進行的對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997); German version EN ISO 9241-15:1997 |
| DIN EN ISO 9241-16-2000 |
帶有可視顯示終端的辦公室工作的人類工效學要求.第16部分:直接操作對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct-manipulation dialogues (ISO 9241-16:1999); German version EN ISO 9241-16:1999 |
| DIN EN ISO 9241-17-2000 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第17部分:表格填寫對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); German version EN ISO 9241-17:1998 |
| DIN EN ISO 9241-4 Berichtigung 1-2002 |
DIN EN ISO 9241-4:1999 勘誤 |
Corrigenda to DIN EN ISO 9241-4:1999; German version EN ISO 9241-4:1998/AC:2000 |
| DIN EN ISO 9241-4-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第4部分:鍵盤要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements for visual display terminals (ISO 9241-4:1998); German version EN ISO 9241-4:1998 |
| DIN EN ISO 9241-5-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第5部分:工作臺布置及人體姿勢的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998); German version EN ISO 9241-5:1999 |
| DIN EN ISO 9241-6-2001 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第6部分:工作環境導則 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999); German version EN ISO 9241-6:1999 |
| DIN EN ISO 9241-7-1998 |
帶有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第7部分:顯示及其相關的反射性要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998); German version EN ISO 9241-7:1998 |
| DIN EN ISO 9241-8-1998 |
用屏幕終端的辦公室工作的人類工效學要求.第8部分:彩色顯示的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997); German version EN ISO 9241-8:1997 |
| DIN EN ISO 9241-9-2002 |
用視覺顯示終端辦公的人類工效學要求.第9部分:非鍵盤輸入設備要求(ISO 9241-9:2000) |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000); German version EN ISO 9241-9:2001 |
| DIN EN ISO 9251-1996 |
熱絕緣.材料的熱傳導條件和性能.術語 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987); German version EN ISO 9251:1995 |
| DIN EN ISO 9283-1999 |
操縱工業機器人.性能參數和相關試驗方法 |
Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1998); German version EN ISO 9283:1998 |
| DIN EN ISO 9288-1996 |
熱絕緣.散熱傳遞.物理的量值和定義 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989); German version EN ISO 9288:1996 |
| DIN EN ISO 9289-1995 |
油料種子殘渣.游離殘留乙烷測定 |
Oilseed residues - Determination of free residual hexane (ISO 9289:1991); German version EN ISO 9289:1995 |
| DIN EN ISO 9300-1995 |
用文杜利臨界流量噴嘴測定氣體流量 |
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:1990); German version EN ISO 9300:1995 |
| DIN EN ISO 9300-2005 |
用文杜利臨界流量噴嘴測量氣體流量 |
|
| DIN EN ISO 9308-1-2001 |
水質.大腸桿菌和大腸桿菌類的檢測與計數.第1部分:膜過濾法 |
Water quality - Detection and enumeration of Escherichia coli coliform bacteria - Part 1: Membrane filtration method (ISO 9308-1:2000); German version EN ISO 9308-1:2000 |
| DIN EN ISO 9308-3-1999 |
水質.表面水和廢水中大腸桿菌和大腸桿菌類的驗證和計數.第3部分:通過液體介質中接種的微型法 |
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 9308-3:1998); German version EN ISO 9308-3:1998 |
| DIN EN ISO 9311-1-2005 |
熱塑管道系統用膠粘劑.第1部分:膠粘膜特性的測定 |
|
| DIN EN ISO 9311-2-2002 |
熱塑管道系統用的膠粘計.第2部分:剪切強度的測定 |
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002 |
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9312-1995 |
電阻焊設備.電極擋塊的絕緣柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990); German version EN ISO 9312:1994 |
| DIN EN ISO 9337-1-2000 |
接觸鏡片.后屈光度的測定.第1部分:使用聚焦儀的手工方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999); German version EN ISO 9337-1:2000 |
| DIN EN ISO 9337-2-2004 |
接觸鏡片.后屈光度的測定.第2部分:在鹽中浸漬的接觸鏡片的測量 |
|
| DIN EN ISO 9338-1998 |
光學和光學儀器.接觸鏡片.直徑的測定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996); German version EN ISO 9338:1998 |
| DIN EN ISO 9339-1-1998 |
光學及光學儀器.接觸鏡片.厚度測定.第1部分:直接接觸鏡片 |
Optics and optical instruments - Contact lenses; Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996); German version EN ISO 9339-1:1998 |
| DIN EN ISO 9339-2-1998 |
光學和光學儀器.接觸鏡片.厚度測定.第2部分:水凝膠接觸鏡片 |
Optics and optical instruments - Contact lenses; determination of thickness - Part 2: Hydrogel contact lenses (ISO 9339-2:1998); German version EN ISO 9339-2:1998 |
| DIN EN ISO 9340-1998 |
光學及光學儀器.接觸鏡片.直接接觸鏡片的應力測定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996); German version EN ISO 9340:1998 |
| DIN EN ISO 9341-1998 |
光學及光學儀器.接觸鏡片.形狀穩定的接觸鏡片中雜質和表面缺陷的測定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996); German version EN ISO 9341:1998 |
| DIN EN ISO 9342-1998 |
光學和光學儀器.焦距計校正用檢驗透鏡 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996); German version EN ISO 9342:1998 |
| DIN EN ISO 9346-1996 |
熱絕緣.質量傳遞.物理量值和定義 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987); German version EN ISO 9346:1996 |
| DIN EN ISO 9360-1-2000 |
麻醉和呼吸設備.人體中增濕呼吸氣體用熱與濕度交換器(HMEs).第1部分:250ml最小呼吸氣容積的HMEs |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000); German version EN ISO 9360-1:2000 |
| DIN EN ISO 9360-2-2003 |
麻醉和呼吸設備.使人體呼吸氣體增濕的熱和潮氣交換器(HMEs).第2部分:潮氣量最小為250ml的氣管造口病人用熱和潮氣交換器 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001); German version EN ISO 9360- |
| DIN EN ISO 9363-1-1999 |
光學和光學儀器.接觸鏡片.接觸鏡片材料致癌性的測定.第1部分:瓊脂涂蓋試驗和生長抑制試驗 |
Optics and optical instruments - Contact lenses; determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994); German version EN ISO 9363-1:1999 |
| DIN EN ISO 9377-2-2001 |
水質.油氣指數的測定.第2部分:溶劑萃取法和氣相色譜法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000); German version EN ISO 9377-2:2000 |
| DIN EN ISO 9391-1995 |
水質.宏無脊椎生物的深水取樣.菌落使用導則 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993); German version EN ISO 9391:1995 |
| DIN EN ISO 9394-1998 |
眼科光學.接觸鏡片和接觸鏡片護理制品.通過兔眼視覺研究測定生物適合性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:1998); German version EN ISO 9394:1998 |
| DIN EN ISO 9396-2001 |
塑料.酚醛樹脂.用自動裝置測定在特別條件下甲階酚醛樹脂的膠凝時間 |
Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9400-1995 |
鎳基合金.抗晶間腐蝕性的測定 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990); German version EN ISO 9400:1995 |
| DIN EN ISO 9408-1999 |
水質.使用在封閉的呼吸測定計中需氧測定的方法評定有機化合物在水介質中的最大需氧生物降解能力 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999); German version EN ISO 9408:1999 |
| DIN EN ISO 9409-1-1997 |
工業機器人.機械接口.第1部分:板(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A) (ISO 9409-1:1996); German version EN ISO 9409-1:1996 |
| DIN EN ISO 9409-1-2004 |
操作型工業機器人.機械接口.第1部分:板 |
|
| DIN EN ISO 9409-2-1997 |
工業機器人.機械接口.第2部分:柄(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (form A) (ISO 9409-2:1996); German version EN ISO 9409-2:1996 |
| DIN EN ISO 9439-2000 |
水質.液體介質中有機化合物最大好氣菌生物降解性的評價.二氧化碳評價試驗 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999); German version EN ISO 9439:2000 |
| DIN EN ISO 945-1994 |
鑄鐵.石墨顯微結構的表示方法 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975); German version EN ISO 945:1994 |
| DIN EN ISO 9454-2-2000 |
軟釬焊劑.分類和要求.第2部分:性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998); German version EN ISO 9454-2:2000 |
| DIN EN ISO 9455-10-2000 |
軟釬焊劑.試驗方法.第10部分:助熔劑功效試驗.焊料展開法 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998); German version EN ISO 9455-10:2000 |
| DIN EN ISO 9455-12-1994 |
軟釬劑.試驗方法.第12部分:鋼管腐蝕試驗 |
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992); German version EN ISO 9455-12:1994 |
| DIN EN ISO 9455-13-1999 |
軟釬焊劑.檢驗方法.第13部分:焊劑飛濺量的測定 |
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996); German version EN ISO 9455-13:1999 |
| DIN EN ISO 9455-15-1999 |
軟釬焊劑.檢驗方法.第15部分:銅腐蝕檢驗 |
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996); German version EN ISO 9455-15:1999 |
| DIN EN ISO 9455-16-2001 |
軟釬焊助熔劑.試驗方法.第16部分:助熔劑功效試驗.濕平衡法 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998); German version EN ISO 9455-16:2001 |
| DIN EN ISO 9455-2-1995 |
軟釬焊劑.試驗方法.第2部分:不揮發物的測定.沸點計法 |
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993); German version EN ISO 9455-2:1995 |
| DIN EN ISO 9455-3-1994 |
軟釬焊劑.試驗方法.第3部分:酸值測定.電勢法和目測滴定法 |
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:1992); German version EN ISO 9455-3:1994 |
| DIN EN ISO 9455-6-1997 |
軟釬焊劑.試驗方法.第6部分:鹵化物含量的測定和驗證(除了氟化物外) |
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995); German version EN ISO 9455-6:1997 |
| DIN EN ISO 9455-9-1995 |
軟釬焊劑.試驗方法.第9部分:氨含量測定 |
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993); German version EN ISO 9455-9:1995 |
| DIN EN ISO 9456-1996 |
光學和光學儀器.眼科光學.眼鏡架標志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991); German version EN ISO 9456:1996 |
| DIN EN ISO 9488-2001 |
太陽能.詞匯 |
Solar energy - Vocabulary (ISO 9488:1999); Trilingual version EN ISO 9488:1999 |
| DIN EN ISO 9509-1995 |
水質.通過化學藥品和污水對活性污泥中微生物硝酸化抑制作用的鑒定方法 |
Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989); German version EN ISO 9509:1995 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com