標準號 |
中文名稱 |
英文名稱 |
| ISO 5810-1982 |
淀粉及其制品.氯化物含量的測定.電位滴定法 |
Starches and derived products; Determination of chloride content; Potentiometric method |
| ISO 5813-1983 |
水質.溶解氧的測定.碘量法 |
Water quality; Determination of dissolved oxygen; Iodometric method |
| ISO 5814-1990 |
水質.溶解氧的測定.電化探測法 |
Water quality; determination of dissolved oxygen; electrochemical probe method |
| ISO 5815-1-2003 |
水質.n日生化需氧量(BODn)的測定.第1部分:加烯丙硫脲的稀釋和接種法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 1: Dilution and seeding method with allythiourea addition ) |
| ISO 5815-1-2003 |
水質.n日生化需氧量(BODn)的測定.第1部分:加烯丙硫脲的稀釋和接種法 |
|
| ISO 5815-1989 |
水質.五天后(BOD5)對生化氧需求的測定.稀釋和催育法 |
Water quality; determination of biochemical oxygen demand after 5 days (BOD); dilution and seeding method |
| ISO 5815-2-2003 |
水質.n日生化需氧量(BODn)的測定.第2部分:未稀釋樣品的測定法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 2: Method for undiluted samples) |
| ISO 5815-2-2003 |
水質.n日生化需氧量(BODn)的測定.第2部分:未稀釋樣品的測定法 |
|
| ISO 5817-1992 |
鋼弧焊接頭.缺點等級導則 |
Arc-welded joints in steel; guidance on quality levels for imperfections |
| ISO 5817-2003 |
焊接.鋼、鎳、鈦及其合金熔焊接頭(束焊除外).缺陷的質量分級 |
|
| ISO 582-1995 |
滾動軸承.倒棱尺寸的最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| ISO 5821-1979 |
電阻點焊電極帽接頭 |
Resistance spot welding electrode caps |
| ISO 5822-1988 |
點焊設備.錐度塞規和錐度環規 |
Spot welding equipment; taper plug gauges and taper ring gauges |
| ISO 5826-1999 |
電阻焊設備.變壓器.適用于各種變壓器的一般規范 |
Resistance welding equipment - Transformers - General specifications applicable to all transformers |
| ISO 5827-1983 |
點焊.電極擋塊和夾緊裝置 |
Spot welding; Electrode back-ups and clamps |
| ISO 5828-2001 |
電阻焊設備.連接水冷耳的接線柱用的輔助電纜 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| ISO 5829-1984 |
電阻點焊.內錐度1:10的電極接頭 |
Resistance spot welding; Electrode adaptors, female taper 1 : 10 |
| ISO 583-1-1999 |
帶織物架的傳送帶.整個厚度和部分厚度.第1部分:試驗方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of elements - Part 1: Methods of test |
| ISO 5830-1984 |
電阻點焊.凸頭電極帽 |
Resistance spot welding; Male electrode caps |
| ISO 5832-1-1997 |
外科植入物.金屬材料.第1部分:可鍛不銹鋼 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| ISO 5832-11-1994 |
外科植入物.金屬材料.第11部分:鍛造6鈦/7鋁/鈮合金 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 5832-12-1996 |
外科植入物.金屬材料.第12部分:鍛造鈷/鉻/鉬合金 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ISO 5832-2-1999 |
外科植入物.金屬材料.第2部分:非合金鈦 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium |
| ISO 5832-3-1996 |
外科植入物.金屬材料.第3部分:鈦6-鉛4-釩可鍛合金 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 5832-4-1996 |
外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| ISO 5832-6-1997 |
外科植入物.金屬材料.第6部分:可鍛鈷鎳鉻鉬合金 |
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 5832-7-1994 |
外科植入物.金屬材料.第7部分:可鍛的和冷成形的鈷鉻鎳鉬鐵合金 |
Implants for surgery; metallic materials; part 7: forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 5832-8-1997 |
外科植入物.金屬材料.第8部分:可鍛的鈷鎳鉻鉬鎢鐵合金 |
Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 5833-2002 |
外科植入物.丙烯酸樹脂粘接劑 |
Implants for surgery - Acrylic resin cements |
| ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.第1部分:粉劑型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form |
| ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.第2部分:模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms |
| ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.第2部分:模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms |
| ISO 5835-1991 |
外科植入物.不對稱螺紋的六角頭球面頸金屬骨螺釘.尺寸 |
Implants for surgery; metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread; dimensions |
| ISO 5836-1988 |
外科植入物.金屬骨板.相應于具有不對稱螺紋及球形底面的螺釘?shù)目?/td>
| Implants for surgery; metal bone plates; holes corresponding to screws with asymmetrical thread and spherical under-surface |
| ISO 5837-1-1985 |
外科植入物.骨髓腔內插釘裝置.第1部分:三葉狀或V形截面的骨髓內腔釘 |
Implants for surgery; Intramedullary nailing systems; Part 1 : Intramedullary nails with cloverleaf or V-shaped cross-section |
| ISO 5837-2-1980 |
外科植入物.骨髓腔內插釘術裝置.第2部分:髓腔用釘 |
Implants for surgery; Intramedullary nailing systems; Part 2 : Medullary pins |
| ISO 5838-1-1995 |
外科植入物.接骨釘和骨架金屬絲.第1部分:材料和機械要求 |
Implants for surgery - Skeletal pins and wires - Part 1: Material and mechanical requirements |
| ISO 5838-2-1991 |
外科植入物.骨骼銷釘和骨架金屬絲.第2部分:斯臺因曼骨骼銷釘.尺寸 |
Implants for surgery; skeletal pins and wires; part 2: Steinmann skeletal pins; dimensions |
| ISO 5838-3-1993 |
外科植入物.骨架銷釘和骨架金屬絲.第3部分:Kirschner骨架金屬絲 |
Implants for surgery; skeletal pins and wires; part 3: Kirschner skeletal wires |
| ISO 584-1982 |
塑料.未飽和的聚酯樹脂.80℃時的反應性測定(常規方法) |
Plastics; Unsaturated polyester resins; Determination of reactivity at 80 degrees C (conventional method) |
| ISO 5840-1996 |
心血管植入物.心臟瓣膜修復術 |
Cardiovascular implants - Cardiac valve prostheses |
| ISO 5841-1-1989 |
心臟起搏器.第1部分:可植入起搏器 |
Cardiac pacemakers; part 1: implantable pacemakers |
| ISO 5841-2-2000 |
外科植入物.心臟起搏器.第2部分:對使用脈搏發生器或?qū)Ч艿娜说呐R床實踐報告 |
Implants for surgery - Cardiac pacemakers - Part 2: Reporting of clinical performance of populations of pulse generators or leads |
| ISO 5841-3 Technical Corrigendum 1-2003 |
外科植入物.心臟起搏器.第3部分:可植入起搏器用扁平型連接器(IS-1).技術勘誤1 |
(Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors (IS-1) for implantable pacemakers; Technical Corrigendum 1) |
| ISO 5841-3 Technical Corrigendum 1-2003 |
外科植入物.心臟起搏器.第3部分:可植入起搏器用扁平型連接器(IS-1).技術勘誤1 |
|
| ISO 5841-3-2000 |
外科植入物.心臟起搏器.第3部分:可植入起搏器用低截面連接器[IS-1] |
Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors [IS-1] for implantable pacemakers |
| ISO 5843-1-1985 |
航空航天器結構.等義術語表.第1部分:航空航天電力設備.三種語言版 |
Aerospace construction; List of equivalent terms; Part 1 : Aerospace electrical equipment Trilingual edition |
| ISO 5843-10-1988 |
航天.等義術語表.第10部分:飛機結構 |
Aerospace; list of equivalent terms; part 10: aircraft structure |
| ISO 5843-2-1990 |
航空航天.等義術語表.第2部分:航空航天用鉚釘.三種語言版 |
Aerospace; list of equivalent terms; part 2: aerospace rivets |
| ISO 5843-3-1997 |
航空航天的等義術語表.第3部分:航空航天用螺栓和螺母 |
Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts |
| ISO 5843-4-1990 |
航空航天.等義術語表.第4部分:飛行動力學 |
Aerospace; list of equivalent terms; part 4: flight dynamics |
| ISO 5843-5-1990 |
航空航天.等義術語一覽表.第5部分:飛行器設備的環境條件和飛行條件 |
Aerospace; list of equivalent terms; part 5; environmental and operating conditions for aircraft equipment |
| ISO 5843-6-1985 |
航空航天.等義術語表.第6部分:標準大氣 |
Aerospace; List of equivalent terms; Part 6 : Standard atmosphere Trilingual edition |
| ISO 5843-8-1988 |
航空航天.等義術語表.第8部分:航空器可靠性 |
Aerospace; list of equivalent terms; part 8: aircraft reliability |
| ISO 5843-9-1988 |
航空航天.等義術語表.第9部分:航空器 |
Aerospace; list of equivalent terms; part 9: aircraft |
| ISO 5845-1-1995 |
技術制圖.緊固件的組合的簡單表示法.第一部分:通用原則 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles |
| ISO 5845-2-1995 |
技術制圖.緊固件的組合的簡單表示法.第二部分:航空設備用鉚釘 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment |
| ISO 585-1990 |
塑料.非增塑的醋酸纖維素.水份含量的測定 |
Plastics; unplasticized cellulose acetate; determination of moisture content |
| ISO 5855-1-1999 |
航空航天.MJ螺紋.第1部分:一般要求 |
Aerospace - MJ threads - Part 1: General requirements |
| ISO 5855-2-1999 |
航空航天.MJ螺紋.第2部分:螺栓和螺母的限制尺寸 |
Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts |
| ISO 5855-3-1999 |
航空航天.MJ螺紋.第3部分:液體系統配件的限制尺寸 |
Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems |
| ISO 5856-1991 |
航空航天.強度等級小于或等于1100 MPa的涂覆或不覆內偏置十字形肋驅動普通金屬柄中短長度MJ螺紋100普通埋頭螺釘.尺寸 |
Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 5857-1988 |
航空航天.強度類別1250MPa和MJ螺紋的合金鋼凸頭螺栓.采購規格 |
Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5858-1999 |
航空航天.最高工作溫度小于或等于425℃的自鎖螺母的采購規范 |
Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 C - Procurement specification |
| ISO 5859-1991 |
航空航天.液壓氣動裝置和部件原理圖的圖形符號 |
Aerospace; graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| ISO 5864-1993 |
ISO 英制螺紋.允差和公差 |
ISO inch screw threads; allowances and tolerances |
| ISO 5866-1983 |
飛機.有扁接頭的Ⅱ-2型和Ⅱ-3A型插座式的倒向繼電器.余隙和固定尺寸 |
Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions |
| ISO 5867-1-1996 |
小型飛機.電磁繼電器和接觸器.第1部分:一般要求 |
Aircraft - Electromagnetic relays and contactors - Part 1: General requirements |
| ISO 587-1997 |
固體礦物燃料.用埃斯凱(Eschkal)混合劑測定氯 |
Solid mineral fuels - Determination of chlorine using Eschka mixture |
| ISO 5878 ADD 1-1983 |
第1次補充 |
Addendum 1-1983 |
| ISO 5878 ADD 2-1983 |
第2次補充 |
Reference atmospheres for aerospace use; addendum 2 |
| ISO 5878 AMD 1-1990 |
第1次修改 |
Reference atmospheres for aerospace use; amendment 1 |
| ISO 5878-1982 |
航空航天用參考大氣 |
Reference atmospheres for aerospace use |
| ISO 5884-1987 |
航空航天.液壓系統和組件.液壓流體固體微粒污染的系統取樣和測量方法 |
Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 5887-1981 |
飛機.乘務員接氧氣源的調壓面具接頭的接口 |
Aircraft; Joints for connecting crew members` regulator masks to oxygen sources |
| ISO 5889-1983 |
錳礦石和錳精礦.鋁、銅、鉛和鋅含量的測定.火焰原子吸收光譜測定法 |
Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method |
| ISO 5889-1983 |
錳礦石和錳精礦.鋁、銅、鉛和鋅含量的測定.火焰原子吸收光譜測定法 |
Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method |
| ISO 589-1981 |
硬煤.全水分的測定 |
Hard coal; Determination of total moisture |
| ISO 589-2003 |
硬煤.總水分的測定 |
(Hard coal - Determination of total moisture ) |
| ISO 589-2003 |
硬煤.總水分的測定 |
|
| ISO 5890-1981 |
錳礦石和錳精礦.硅含量的測定.重量法 |
Manganese ores and concentrates; Determination of silicon content; Gravimetric method |
| ISO 5892-1981 |
建筑橡膠襯墊.預制結構襯墊用硫化硬橡膠材料.規范 |
Rubber building gaskets; Materials for preformed solid vulcanized structural gaskets; Specification |
| ISO 5893-2002 |
可拉伸、彎曲和壓縮型(恒定的橫動速率)橡膠和塑料試驗設備規范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| ISO 5894-1999 |
船和造船技術.有螺栓緊固蓋的人孔 |
Ships and marine technology - Manholes with bolted covers |
| ISO 5897-1998 |
轎車.后車窗除霧系統.試驗方法 |
Passenger cars - Rear-window demisting system - Test method |
| ISO 5898-1997 |
轎車.轎車后車窗除霜系統.試驗方法 |
Passenger cars - Rear-window defrosting system - Test method |
| ISO 590-1981 |
巴西黃樟油 |
Oil of brazilian sassafras |
| ISO 5902-1980 |
高山雪橇.彈性性能的測定 |
Alpine skis; Determination of the elastic properties |
| ISO 5903-1981 |
體育器械.自由體操著地墊和地板.硬度和沖擊緩沖的測定 |
Gymnastic equipment; Landing mats and surfaces for floor exercises; Determination of hardness and impact damping |
| ISO 5904-1981 |
體育器械.自由體操用的著地墊和地板.阻滑移的測定 |
Gymnastic equipment; Landing mats and surfaces for floor exercises; Determination of resistance to slipping |
| ISO 5905-1980 |
體育器械.著地墊(2000mm×125mm×60mm) |
Gymnastic equipment; Landing mats (2 000 mm x 1 250 mm x 60 mm) |
| ISO 5906-1980 |
體育器械.自由體操用的地板.墊子 |
Gymnastic equipment; Surfaces for floor exercices; Mats |
| ISO 5907-1980 |
體育器械.自由體操用地板.木地板 |
Gymnastic equipment; Surfaces for floor exercises; Boards |
| ISO 591-1-2000 |
涂料用二氧化鈦顏料.第1部分:規范和試驗方法 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test |
| ISO 5912 AMD 1-1998 |
野營帳篷.修改件1 |
Camping tents; Amendment 1 |
| ISO 5912-1993 |
野營帳篷 |
Camping tents |
| ISO 5912-2003 |
宿營帳篷 |
(Camping tents ) |
| ISO 5912-2003 |
宿營帳篷 |
|
| ISO 5912-2003 |
宿營帳篷 |
|
| ISO 5915-1980 |
工業用六氟硅酸鈉.顆粒大小分布的測定.篩分法 |
Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method |
| ISO 5916-1982 |
工業用氯代甲烷.雜質的測定.氣相色譜法 |
Methyl chloride for industrial use; Determination of impurities; Gas chromatographic methods |
| ISO 5917-1980 |
氯氟代烴.沸程的測定.產品特性試驗 |
Chlorofluorinated hydrocarbons; Determination of boiling range; Test for product characterization |
| ISO 5918-1982 |
工業用氯氟代烴.惰性氣體含量的測定.氣相色譜法.一般原理 |
Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles |
| ISO 592-1998 |
香精油.旋光度的測定 |
Essential oils - Determination of optical rotation |
| ISO 5920-1983 |
氯氟代烴.水含量的測定.重量法 |
Chlorofluorinated hydrocarbons; Determination of water content; Gravimetric method |
| ISO 5921-1982 |
工業用氯氟代烴.氣相色譜分析的一般原理 |
Chlorofluorohydrocarbons for industrial use; Analysis by gas chromatography; General principles |
| ISO 5922-1981 |
可鍛鑄鐵 |
Malleable cast iron |
| ISO 5923-1989 |
火災防護措施.滅火介質.二氧化碳 |
Fire protection; fire extinguishing media; carbon dioxide |
| ISO 5925-1-1981 |
著火試驗.控制煙霧的門戶裝置性能的評定.第1部分:環境溫度試驗 |
Fire tests; Evaluation of performance of smoke control door assemblies; Part 1 : Ambient temperature test |
| ISO 5930-1979 |
工業用天然及人造冰晶石和氟化鋁.磷含量的測定.還原磷鉬 酸鹽光度法 |
Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Reduced molybdophosphate photometric method |
| ISO 5931-2000 |
鋁生產用碳素物.煅燒焦炭和煅燒碳產品.用艾氏卡法測定全硫含量 |
Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method |
| ISO 5932-1980 |
工業用硼酸,氧化硼和四硼酸二鈉.鈷含量的測定.2-亞硝基-1萘酚光度法 |
Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of cobalt content; 2- nitroso-1- naphthol photometric method |
| ISO 5933-1980 |
工業用硼酸、氧化硼、四硼酸二鈉和粗硼酸鈉.硼酸、氧化硼和四硼酸二鈉中鎳總含量的測定以及粗硼酸鈉中可溶于堿的鎳含量的測定.糠偶酰 α-二肟光度法 |
Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use; determination of total nickel content of boric acid, boric oxide and disodium tetraborates and the alkali-soluble nickel content of crude sodium borates; furil alp |
| ISO 5934-1980 |
工業用粗硼酸鈉.堿可溶銅和錳含量的測定.雙(二芐基二硫代氨基甲酸)鋅和甲醛肟光度法 |
Crude sodium borates for industrial use; Determination of alkali-soluble copper and manganese contents; Zinc bis(dibenzyldithiocarbamate) and formaldehyde oxime photometric methods |
| ISO 5935-1984 |
工業用粗硼酸鈉.二氧化硅總含量和堿可溶氧化硅含量的測定.硅鉬酸鹽光譜測定法 |
Crude sodium borates for industrial use; Determination of total and alkali-soluble silica contents; Molybdosilicate spectrometric method |
| ISO 5936-1980 |
工業用粗硼酸鈉.碳酸鹽含量的測定.重量法 |
Crude sodium borates for industrial use; Determination of carbonate content; Gravimetric method |
| ISO 5937-1980 |
工業用過硼酸鈉.磨耗度的測定 |
Sodium perborates for industrial use; Determination of degree of attrition |
| ISO 5938-1979 |
工業用天然及人造冰晶石和氟化鋁.硫含量的測定.X射線熒光光譜法 |
Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of sulphur content; X-ray fluorescence spectrometric method |
| ISO 5939-1980 |
生產鋁用碳素材料.電極用瀝青.水含量的測定.共沸蒸溜 [迪安--斯達克(Dean and Stark)測定法]法 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method |
| ISO 594-1-1986 |
注射器、針頭和某些其它醫用設備的有6%錐度的錐形配件.第1部分:一般要求 |
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com