標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 6806-1996 |
用于油燃燒器的軟管和軟管組件.規范 |
Rubber hoses and hose assemblies for use in oil burners - Specification |
| BS EN ISO 6807-2004 |
旋轉式鉆探和振動用橡膠軟管和軟管組件.規范 |
|
| BS EN ISO 6807-2004 |
旋轉式鉆探和振動用橡膠軟管和軟管組件.規范 |
|
| BS EN ISO 6808-2001 |
石油類液體抽吸和低壓排放用塑料軟管和軟管組件.規范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| BS EN ISO 6817-1993 |
封閉管道中導電液體流量測量.電磁流率計測量法 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters |
| BS EN ISO 683-17-1999 |
熱處理鋼、合金鋼和易切削鋼.滾珠軸承和滾柱軸承鋼 |
(Heat-treated steels, alloy steels and free-cutting steels - Ball and roller bearing steels) |
| BS EN ISO 6845-1989 |
表面活性劑.工業烷烴磺酸鹽.烷烴單磺酸鹽平均相對分子質量和烷烴單磺酸鹽含量的測定 |
(Surface active agents - Technical alkane sulfonates - Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content) |
| BS EN ISO 6847-2001 |
焊接消耗品.化學分析用的焊接金屬塊的沉積 |
(Welding consumables - Deposition of a weld metal pad for chemical analysis) |
| BS EN ISO 6848-2005 |
電弧焊和切割.非自耗鎢電極.分類 |
|
| BS EN ISO 6860-1985 |
涂料和清漆.彎曲試驗(圓錐心軸) |
(Paints and varnishes - Bend test (conical mandrel)) |
| BS EN ISO 6867-2001 |
動物飼料.用高效液相色譜法測定維生素E的含量 |
(Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography) |
| BS EN ISO 6869-2001 |
動物飼料.鈣,銅,鐵,鎂,錳,鉀,鈉和鋅含量的測定.使用原子吸收光譜法 |
(Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry) |
| BS EN ISO 6871-1-1997 |
牙科基本金屬鑄造合金.第1部分:鈷合金 |
(Dental base metal casting alloys - Cobalt-based alloys) |
| BS EN ISO 6871-2-1997 |
牙科基本金屬鑄造合金.第2部分:鎳基合金 |
(Dental base metal casting alloys - Nickel-based alloys) |
| BS EN ISO 6872-1999 |
牙科烤瓷 |
(Dental ceramic) |
| BS EN ISO 6873-2000 |
牙科石膏制品 |
(Dental gypsum products) |
| BS EN ISO 6875-1997 |
牙科設備.牙科病人用椅 |
(Dental equipment - Dental patient chair) |
| BS EN ISO 6876-2002 |
牙科牙根管封閉材料 |
(Dental root canal sealing materials) |
| BS EN ISO 6877-1998 |
牙科用牙根管充填針 |
(Dental root-canal obturating points) |
| BS EN ISO 6878-2004 |
水質.磷的測定.鉬酸銨的光譜測定法 |
|
| BS EN ISO 6887-1-1999 |
食品和動物飼料制品微生物學.試樣準備及用于微生物檢驗的初始懸浮液和十倍制稀釋液.初始懸浮液和十倍制稀釋 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - General rules for the preparation of the initia) |
| BS EN ISO 6887-2-2003 |
食品和動物飼料的微生物學.用于微生物檢驗的試驗樣品的初始懸浮液和十倍稀釋液的制備.肉和肉制品制備的特殊 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of meat and) |
| BS EN ISO 6887-3-2003 |
食品和動物飼料的微生物學.用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的準備.魚和水產品準備的特殊規 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of fish and) |
| BS EN ISO 6887-4-2003 |
食品和動物飼料的微生物學.用于微生物檢驗的試驗樣品的初始懸浮和十倍制稀釋的準備.除奶和奶制品、肉和肉制 |
() |
| BS EN ISO 6888-1-1999 |
食品和動物飼料微生物學.陽性葡萄球菌和其它屬的凝膠水平計數方法.用Baird-Parke瓊脂培養基技術 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using Baird-Parker agar) |
| BS EN ISO 6888-2-1999 |
食品和動物飼料微生物學.陽性葡萄球菌和其它屬的凝膠水平計數方法.兔原生質血纖蛋白質瓊脂培養基技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using rabbit plasma fibrinogen agar medium |
| BS EN ISO 6888-3-2003 |
食品和動物飼料微生物學.凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法.低數值探測和MPN技術 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Detection and MPN technique for l) |
| BS EN ISO 6926-2000 |
聲學.聲功率級測定用基準聲源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS EN ISO 6940-1995 |
紡織纖維.耐燃燒.垂直定向樣品易燃性的測定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens |
| BS EN ISO 6940-2004 |
紡織織物.燃燒性能.垂直向樣品易點燃性的測定 |
|
| BS EN ISO 6941-2004 |
紡織織物.燃燒性能.垂直向樣品火焰蔓延性的測定 |
|
| BS EN ISO 6942-2002 |
防護服.對熱和火的防護.評估暴露到熱輻射源的材料和材料組件的試驗方法 |
(Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat) |
| BS EN ISO 6945-1996 |
橡膠軟管.外涂層耐磨性的測定 |
(Rubber hoses - Determination of abrasion resistance of the outer cover) |
| BS EN ISO 6946-1997 |
建筑物組件和建筑物構件.熱阻和熱傳遞率.計算方法 |
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method |
| BS EN ISO 6947-1997 |
焊接.工作狀態.傾角和轉動的定義 |
(Welds - Working positions - Definitions of angles of slope and rotation) |
| BS EN ISO 6974-1-2000 |
天然氣.用氣相色譜法測定規定的不確定度的組分.簡明分析導則 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis) |
| BS EN ISO 6974-2-2001 |
天然氣.用氣相色譜法測定規定的不確定度的組分.測量系統特性和數據處理統計 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data) |
| BS EN ISO 6974-3-2000 |
天然氣.用氣相色譜法測定規定不確定度的組分.利用兩個封裝柱測定氫、氦、氧、氮、二氧化碳和 C8 碳氫化合物 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two pack) |
| BS EN ISO 6974-4-2000 |
天然氣.用氣相色譜法測定規定不確定度的組分.利用兩個封裝柱實驗室在線測量系統測定氮、二氧化碳和C1 到 C5 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line mea) |
| BS EN ISO 6974-5-2000 |
天然氣.用氣相色譜法測定規定不確定度的組分.利用三個封裝柱實驗室在線過程應用系統測定氮、二氧化碳和C1 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line pro) |
| BS EN ISO 6988-1986 |
金屬涂層和其它無機物涂層.在一般水分冷凝作用下的二氧化硫試驗 |
(Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture) |
| BS EN ISO 7027-2000 |
水質.混濁度的測定 |
(Water quality - Determination of turbidity) |
| BS EN ISO 7029-2000 |
聲學.作為齡期函數的聽力閾的統計分布 |
(Acoustics - Statistical distribution of hearing thresholds as a function of age) |
| BS EN ISO 703-1-2000 |
傳送帶.橫向撓性和可成槽形性.試驗方法 |
(Conveyor belts - Transverse flexibility and troughability - Test method) |
| BS EN ISO 7040-1998 |
1型通用扭矩六角螺母(用非金屬墊圈).性能類別5、8和10 |
(Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10) |
| BS EN ISO 7042-1998 |
2型常用扭矩全金屬六角螺母.性能類別5、8、10和12 |
(Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12) |
| BS EN ISO 7045-1995 |
Z型和H型十字凹平頭螺釘.A級產品 |
(Pan head screws with type H or type Z cross recess - Product grade A) |
| BS EN ISO 7046-1-1994 |
H型或Z型十字槽沉頭螺釘(圓頭型).A級產品.4.8類性能鋼 |
(Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Countersunk flat head screws (common head style) with type H or type Z cross recess - Product gra) |
| BS EN ISO 7046-2-1995 |
H型和Z型十字埋凹頭螺釘.A級產品.8.8類,不銹鋼和非鐵類金屬鋼特性 |
(Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals) |
| BS EN ISO 7047-1995 |
H型和Z型十字凹埋頭螺釘(普通型).A級產品 |
(Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A) |
| BS EN ISO 7048-1999 |
十字槽圓頭螺釘 |
(Cross recessed cheese head screws) |
| BS EN ISO 7049-1995 |
十字凹頭絲錐螺釘 |
(Cross recessed pan head tapping screws) |
| BS EN ISO 7050-1995 |
十字凹埋頭絲錐螺釘(普通型)規范 |
(Specification for cross-recessed countersunk (flat) head tapping screws (common head style)) |
| BS EN ISO 7051-1995 |
十字凹頭開槽絲錐螺釘規范 |
(Specification for cross-recessed raised countersunk (oval) head tapping screws) |
| BS EN ISO 707-1997 |
奶乳和乳制品.取樣導則 |
(Milk and milk products - Guidance on sampling) |
| BS EN ISO 7083-1995 |
技術制圖.幾何形位公差的符號.比例和尺寸 |
(Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions) |
| BS EN ISO 7085-1999 |
表面淬火和回火的米制滾螺紋螺釘?shù)臋C械和性能要求 |
(Mechanical and performance requirements of case hardened and tempered metric thread rolling screws) |
| BS EN ISO 7089-2000 |
平墊圈.標準系列.產品等級A |
(Plain washers - Normal series - Product grade A) |
| BS EN ISO 7090-2000 |
倒角平墊圈.標準系列.產品等級A |
(Plain washers, chamfered - Normal series - Product grade A) |
| BS EN ISO 7091-2000 |
平墊圈.標準系列.產品等級C |
(Plain washers - Normal series - Product grade C) |
| BS EN ISO 7092-2000 |
平墊圈.小型系列.產品等級A |
(Plain washers - Small series - Product grade A) |
| BS EN ISO 7093-1-2000 |
平墊圈.大型系列.產品等級A |
(Plain washers - Large series - Product grade A) |
| BS EN ISO 7093-2-2000 |
平墊圈.大型系列.產品等級C |
(Plain washers - Large series - Product grade C) |
| BS EN ISO 7094-2000 |
平墊圈.超大型系列.產品等級C |
(Plain washers - Extra large series - Product grade C) |
| BS EN ISO 7096-2000 |
土方機械.駕駛員座椅振動的實驗室評價 |
(Earth-moving machinery - Laboratory evaluation of operator seat vibration) |
| BS EN ISO 7142-2004 |
色漆和清漆用粘合劑.環氧樹脂.通用試驗方法 |
|
| BS EN ISO 717-1-1997 |
聲學.建筑物和建筑物構件內的隔音測定.第1部分:建筑物和內部建筑物構件的氣載音響隔離 |
(Acoustics - Rating of sound insulation in buildings and of building elements - Airborne sound insulation) |
| BS EN ISO 717-2-1997 |
聲學.建筑物和建筑物構件內的隔音測定.第2部分:撞擊音響的隔離 |
(Acoustics - Rating of sound insulation in buildings and of building elements - Impact sound insulation) |
| BS EN ISO 7200-2004 |
技術產品文獻.標題欄和文獻標題的數據區域 |
|
| BS EN ISO 7208-2000 |
脫脂乳、乳清和乳酪.脂肪含量的測定.重量分析法(基準方法) |
(Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (reference method)) |
| BS EN ISO 7214-1998 |
泡沫塑料.聚乙烯.試驗方法 |
(Cellular plastics - Polyethylene - Methods of test) |
| BS EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定壓降下的氣流值估計法 |
(Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop) |
| BS EN ISO 7233-1992 |
橡膠和塑料軟管以及軟管部件.吸入阻力的測定 |
(Rubber and plastics hoses and hose assemblies - Determination of suction resistance) |
| BS EN ISO 7235-2003 |
聲學.管道消音器和氣體終端設備的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss) |
| BS EN ISO 7250-1998 |
技術設計的基本人體測量 |
(Basic human body measurements for technological design) |
| BS EN ISO 7263-1995 |
瓦楞紙.試驗起瓦楞后耐壓扁性的測定 |
(Corrugating medium - Determination of the flat crush resistance after laboratory fluting) |
| BS EN ISO 7278-1-1990 |
液態烴.動態測量.容積式流量計試驗系統.第1部分:一般原理 |
(Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles) |
| BS EN ISO 7278-2-1990 |
液態烴.動態測量.容量計用驗證系統.第2部分:管式校準儀 |
(Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers) |
| BS EN ISO 7284-1996 |
電阻焊設備.汽車工業用多點點焊的兩個單獨副線圈的變壓器詳細規范 |
(Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry) |
| BS EN ISO 7287-2002 |
熱切割設備用圖形符號 |
(Graphical symbols for thermal cutting equipment) |
| BS EN ISO 7291-2001 |
氣焊設備.小于等于300bar的焊接、切削及相關工藝用多頭管系用壓力調節器 |
(Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar) |
| BS EN ISO 7327-1996 |
塑料.環氧樹脂用固化劑和催化劑.酸酐中游離酸測定 |
(Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride) |
| BS EN ISO 7328-2000 |
以奶為基料的食用冰制品和冰配制食品.脂肪含量的測定.重量分析法(基準方法) |
(Milk based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method)) |
| BS EN ISO 7345-1996 |
熱絕緣.物理量與定義 |
(Thermal insulation - Physical quantities and definitions) |
| BS EN ISO 7346-1-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死的物質毒性的測定.靜態法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Static method) |
| BS EN ISO 7346-2-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.半靜態法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Semi-static method) |
| BS EN ISO 7346-3-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.流量法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Flow-through method) |
| BS EN ISO 7369-2004 |
管道.金屬軟管和軟管組件.詞匯 |
|
| BS EN ISO 7371-1996 |
家用冷凍設備.有或沒有低溫隔層的冰箱.特征和試驗方法 |
(Household refrigerating appliances - Refrigerators with or without low temperature compartment - Characteristics and test methods) |
| BS EN ISO 7376-2004 |
麻醉和呼吸設備.氣管插管術用喉鏡 |
|
| BS EN ISO 7376-2004 |
麻醉和呼吸設備.氣管插管術用喉鏡 |
|
| BS EN ISO 7380-1998 |
六角型套解圓頭螺紋 |
(Hexagon socket button head screws) |
| BS EN ISO 7380-2004 |
內六角平圓頭螺釘 |
|
| BS EN ISO 7384-1995 |
模擬大氣腐蝕試驗.通則 |
(Corrosion tests in artificial atmospheres - General requirements) |
| BS EN ISO 7389-2003 |
房屋建筑.連接件.密封件回彈性的測定 |
(Building construction - Jointing products - Determination of elastic recovery of sealants) |
| BS EN ISO 7390-2004 |
房屋建筑.連接件.密封劑的耐流動性測定 |
|
| BS EN ISO 7405-1997 |
牙科學.牙科醫療設備生物分解性的疾病前評定.牙科材料的試驗方法 |
(Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials) |
| BS EN ISO 7437-1996 |
技術制圖.建筑制圖.預制結構件的生產圖紙的一般規則 |
(Technical drawings - Construction drawings - General rules for execution of production drawings for prefabricated structural components) |
| BS EN ISO 7438-2000 |
金屬材料.彎曲試驗 |
(Metallic materials - Bend test) |
| BS EN ISO 7439-2002 |
含銅的宮內節育避孕器具.要求、試驗 |
(Copper-bearing intra-uterine contraceptive devices - Requirements, tests) |
| BS EN ISO 7441-1995 |
金屬和合金的耐腐蝕性.在露天暴露腐蝕試驗中雙金屬腐蝕性的測定 |
(Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests) |
| BS EN ISO 7458-2004 |
玻璃容器.耐內壓力.試驗方法 |
|
| BS EN ISO 7459-2004 |
玻璃容器.抗熱震性和熱震耐久性.試驗方法 |
|
| BS EN ISO 7459-2004 |
玻璃容器.抗熱震性和熱震耐久性.試驗方法 |
|
| BS EN ISO 748-2000 |
明渠液體流量測量.速度面積法 |
(Measurement of liquid flow in open channels - Velocity-area methods) |
| BS EN ISO 7488-1996 |
牙科用混汞器 |
(Dental amalgamators) |
| BS EN ISO 7490-2001 |
牙科用石膏粘接鑄造熔模 |
(Dental gypsum-bonded casting investments) |
| BS EN ISO 7491-2000 |
牙科材料.顏色穩定性的測定 |
(Dental materials - Determination of colour stability) |
| BS EN ISO 7492-1997 |
牙科探測器 |
(Dental explorers) |
| BS EN ISO 7493-2000 |
牙科醫生凳 |
(Dental operator’s stool) |
| BS EN ISO 7494-2-2003 |
牙科學.牙科裝置.供水和供氣 |
(Dentistry - Dental units - Water and air supply) |
| BS EN ISO 75-1-1994 |
塑料.載荷下偏轉溫度的測定.第1部分:一般試驗方法 |
(Plastics - Determination of temperature of deflection under load - General test method) |
| BS EN ISO 75-1-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.一般試驗方法 |
|
| BS EN ISO 75-2-1994 |
塑料.載荷下偏轉溫度的測定.第2部分:塑料和橡木 |
(Plastics - Determination of temperature of deflection under load - Plastics and ebonite) |
| BS EN ISO 75-2-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.塑料、硬橡膠和長纖維增強合成物 |
|
| BS EN ISO 75-3-1994 |
塑料.載荷下偏轉溫度的測定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
(Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics) |
| BS EN ISO 75-3-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.高強度熱固性疊層板材 |
|
| BS EN ISO 7500-1-1999 |
金屬材料.靜態單軸向試驗機的鑒定.拉伸和壓縮試驗機.測力系統的鑒定和校準 |
(Metallic materials - Verification of static uniaxial testing machines - Tension/compression testing machines - Verification and calibration of the force-measuring system) |
| BS EN ISO 7500-1-2004 |
金屬材料.靜態單軸向試驗機的鑒定.拉伸和壓縮試驗機.測力系統的鑒定和校準 |
|
| BS EN ISO 7500-2-1999 |
金屬材料.靜態單軸向試驗機的校正.拉伸蠕變試驗機.對作用負載力的校驗 |
(Metallic materials - Verification of static uniaxial testing machines - Tension creep testing machines - Verification of the applied load) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com