標準號 |
中文名稱 |
英文名稱 |
| EN ISO 787-18-1995 |
顏料和體質顏料的通用試驗方法第18部分：篩余物測定機械沖洗法 |
General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure (ISO 787-18:1983) |
| EN ISO 787-19-1995 |
顏料的通用試驗方法第19部分：水溶性硝酸鹽的測定(水楊酸法) |
General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method) (ISO 787-19:1974) |
| EN ISO 787-2-1995 |
顏料和體質顏料的通用試驗方法第2部分：在105℃揮發物的測定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 ℃ (ISO 787-2:1981) |
| EN ISO 787-23-1995 |
顏料和體質顏料的通用試驗方法第23部分：密度測定(用離心機消除夾帶的空氣) |
General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979) |
| EN ISO 787-24-1995 |
顏料和體質顏料的通用試驗方法第24部分：著色顏料的相對著色力和白色顏料的相對散射力的測定光度法 |
General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods (ISO 787-24:1985) |
| EN ISO 787-3-2000 |
顏料和體質顏料的通用試驗方法第3部分：水溶性物質的測定 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000) |
| EN ISO 787-5-1995 |
顏料和體質顏料的通用試驗方法第5部分：吸油值測定 |
General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980) |
| EN ISO 787-8-2000 |
顏料和體質顏料的通用試驗方法第8部分：可溶于水的物質的測定冷萃取法 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water; Cold extraction method (ISO 787-8:2000) |
| EN ISO 787-9-1995 |
顏料和體質顏料的通用試驗方法第9部分：水懸浮液pH值的測定 |
General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension (ISO 787-9:1981) |
| EN ISO 7885-2000 |
一次性牙科直接注射針頭 |
Sterile dental injection needles for single use (ISO 7885:2000) |
| EN ISO 7886-1-1997 |
一次性使用無菌皮下注射器 第1部分：手推注射器 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995) |
| EN ISO 7886-2-1997 |
一次性使用無菌皮下注射器第2部分：帶動力驅動注射泵的注射器 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
| EN ISO 7887-1994 |
水質色度的檢驗和測定 |
Water quality - Examination and determination of colour (ISO 7887:1994) |
| EN ISO 7899-2-2000 |
水質腸球菌的檢測和計數第２部分：濾膜過濾法 |
Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000) |
| EN ISO 7932-1997 |
微生物學臘狀芽孢桿菌計數通用指南30度時菌落計數技術 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30℃ (ISO 7932:1993, including Technical Corrigendum 1:1997) |
| EN ISO 7933-2004 |
熱環境的人類工效學.通過計算預熱應力對熱應力的分析測定和說明 |
|
| EN ISO 7937-2004 |
食品和動物飼料的微生物學.梭菌屬計數的水平方法.菌落計數技術 |
|
| EN ISO 7944-1998 |
光學和光學儀器基準波長 |
Optics and optical instruments - Reference wavelengths (ISO 7944:1998) |
| EN ISO 7965-2-1996 |
袋跌落試驗第2部分：熱塑柔性薄膜袋 |
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993) |
| EN ISO 7980-2000 |
水質鈣和鎂的測定原子吸收光譜法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986) |
| EN ISO 7998-1996 |
光學和光學儀器 |
Optics and optical instruments - Spectacle frames - Vocabulary and lists of equivalent terms (ISO 7998:1984) |
| EN ISO 801-1-1996 |
紙漿成批銷售質量的測定第1部分：漿板漿包 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 801-1:1994) |
| EN ISO 801-3-1996 |
紙漿成批銷售質量的測定第3部分：成套漿包 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994) |
| EN ISO 8028-2000 |
真空噴涂漆用橡膠和／或塑料軟管和軟管組件規范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
| EN ISO 8030-1997 |
橡膠和塑料軟管易燃燒性試驗方法 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) |
| EN ISO 8031-1997 |
橡膠和塑料軟管和軟管組件電阻率測定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993) |
| EN ISO 8032-1999 |
橡膠和塑料軟管和軟管組件液壓脈沖彎曲試驗(半歐姆型試驗) |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
| EN ISO 8044-1999 |
金屬與合金的腐蝕基本術語和定義 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999) |
| EN ISO 8067-1995 |
軟質泡沫聚合材料撕裂強度的測定 |
Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:1989) |
| EN ISO 8092-1-1998 |
道路車輛車載電氣線束的連接第1部分：單極連接接頭尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
| EN ISO 8092-2-2001 |
道路車輛車載電氣線束的連接第2部分：定義、試驗方法和一般性能要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2000) |
| EN ISO 8092-3-1999 |
道路車輛車載電氣線束的連接第3部分：多極連接接頭尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
| EN ISO 8092-4-1999 |
道路車輛車載電氣線束的連接第4部分：單極和多極連接插頭尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997) |
| EN ISO 8099-2000 |
小艇廁所污物集存系統 |
Small craft - Toilet waste retention systems (ISO 8099:2000) |
| EN ISO 8106-2004 |
玻璃容器.用重量法測定容量.試驗方法 |
|
| EN ISO 8113-2004 |
玻璃容器.耐垂直負載.試驗方法 |
|
| EN ISO 8130-14-2004 |
粉末涂料.第14部分:術語 |
|
| EN ISO 8130-9-1999 |
粉末涂料第9部分：取樣 |
Coating powders - Part 9: Sampling (ISO 8130-9:1992) |
| EN ISO 8166-2003 |
電阻焊接 用固定機械設備評定點焊焊條壽命的程序 |
Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machines settings (ISO 8166:2003) |
| EN ISO 81714-1-1999 |
產品技術文件用圖形符號的設計第1部分：基本規則 |
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999) |
| EN ISO 8178-1-1996 |
往復式內燃機排放測量第1部分：氣體和顆粒排放物的試驗臺測量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996) |
| EN ISO 8178-2-1996 |
往復式內燃機排放測量第2部分：氣體和顆粒排放物的現場測量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996) |
| EN ISO 8178-4-1996 |
往復式內燃機排放測量第4部分：不同用途發動機的試驗周期 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996) |
| EN ISO 8178-5-1997 |
往復式內燃機排放測量第5部分：試驗用燃料 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997) |
| EN ISO 8178-6-2000 |
往復式內燃機排放測量第6部分：測量結果和試驗報告 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000) |
| EN ISO 8185-1997 |
醫用加濕器濕化系統的一般要求 |
Humidifiers for medical use - General requirements for humidification systems (ISO 8185:1997) |
| EN ISO 8192-1995 |
水質活性污泥對氧消耗量的抑制性試驗 |
Water quality - Test for the inhibition of oxygen consumption by activated sludge (ISO 8192:1986) |
| EN ISO 8205-1-2002 |
電阻焊接水冷次級線圈連接電纜第1部分：雙導體連接電纜的尺寸和要求 |
Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |
| EN ISO 8205-2-2002 |
電阻焊接水冷次級線圈連接電纜第2部分：單根導線連接電纜的尺寸和要求 |
Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) |
| EN ISO 8205-3-1996 |
電阻焊接水冷次級線圈連接電纜第3部分：試驗要求 |
Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993) |
| EN ISO 8222-2002 |
石油測量系統校正用校準容積校準槽使用時的修正溫度 |
Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002) |
| EN ISO 8224-1-2003 |
移動式噴澆灌機械 第1部分：操作特性和實驗室及現場試驗方法 |
Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO 8224-1:2003) |
| EN ISO 8230-1997 |
使用全氯乙烯的干洗機的安全要求 |
Safety requirements for dry-cleaning machines using perchloroethylene (ISO 8230:1997) |
| EN ISO 8249-2000 |
焊接奧氏體和成雙鐵素體奧氏體鎳－鉻不銹鋼焊接金屬中鐵素體數(FN)的測定 |
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| EN ISO 8253-1-1998 |
聲學聽力測試方法第1部分：基本純音氣導和骨導閾測聽方法 |
Acoustics - Audiometric test methods - Part 1: Basic pure tone air and bone conduction threshold audiometry (ISO 8253-1:1989) |
| EN ISO 8253-2-1998 |
聲學聽力測試方法第2部分：純音和窄帶試驗信號聲場測聽方法 |
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure tone and narrow-band test signals (ISO 8253-2:1992) |
| EN ISO 8253-3-1998 |
聲學聽力測試方法第3部分：語言測聽方法 |
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:1996) |
| EN ISO 8254-1-2003 |
紙和紙板光澤度的測量第1部分：用聚光束測量75°光澤、TAPPI法 |
Paper and board - Measurement of specular gloss - Part 1: 75?gloss with a converging beam, TAPPI method (ISO 8254-1:1999) |
| EN ISO 8254-2-2003 |
紙和紙板光澤度的測量第2部分：用平行光束的75度、DINI法 |
Paper and board - Measurement of specular gloss - Part 2: 75?gloss with a parallel beam, DIN method (ISO 8254-2:2003) |
| EN ISO 8256-1996 |
塑料拉伸沖擊強度測定包括技術勘誤1 |
Plastics - Determination of tensile-impact strength (ISO 8256:1990, including Technical Corrigendum 1:1991) |
| EN ISO 8256-2004 |
塑料.拉伸沖擊強度測定 |
|
| EN ISO 8261-2001 |
乳和乳制品用于微生物檢驗的試驗樣品及初始懸浮液與十倍稀釋劑制備的通用指南 |
Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination (ISO 8261:2001) |
| EN ISO 8282-1997 |
牙科設備汞及合金混和器和調節器 |
Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994) |
| EN ISO 8289-2001 |
釉瓷和搪瓷檢查和定位缺陷的低壓試驗 |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000) |
| EN ISO 8290-1998 |
釉瓷和搪瓷室溫下抗硫酸腐蝕的測定 |
Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature (ISO 8290:1998) |
| EN ISO 8292-1995 |
動植物油脂硬脂含量的測定脈沖核磁共振法 |
Animal and vegetable fats and oils - Determination of solid fat content - Pulsed nuclear magnetic resonance method (ISO 8292:1991) |
| EN ISO 8294-1999 |
動植物油脂銅、鐵和鎳含量的測定石墨爐原子吸收法 |
Animal and vegetable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994) |
| EN ISO 8295-2004 |
塑料.薄膜和薄板.摩擦系數的測定 |
|
| EN ISO 8307-1997 |
軟質泡沫聚合材料回彈性測定 |
Flexible cellular polymeric materials - Determination of resilience (ISO 8307:1990) |
| EN ISO 8308-1995 |
橡膠和塑料軟管和管件液體透過管壁性能測定 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993) |
| EN ISO 8311-1995 |
冷凍輕烴液船用隔膜式油罐和單獨式油罐的標定物理測量法 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement (ISO 8311:1989) |
| EN ISO 8316-1995 |
封閉管道中液體流量的測定采用在容積計量容器內收集液體的方法 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987) |
| EN ISO 8317-2004 |
防兒童拆開的包裝.可再次包裝的要求和試驗程序 |
|
| EN ISO 8318-2002 |
包裝 滿裝的運輸包裝和單貨物 用振動頻率作正弦振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000) |
| EN ISO 8320-1-2003 |
接觸透鏡與接觸透鏡護理產品詞匯第1部分：接觸透鏡 |
Contact lenses and concact lens care products - Vocabulary - Part 1: Contact lenses (ISO 8320-1:2003) |
| EN ISO 8320-2-2001 |
接觸透鏡與接觸透鏡護理產品詞匯第2部分：接觸透鏡護理產品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products (ISO 8320-2:2001) |
| EN ISO 8321-1-2002 |
眼科光學接觸透鏡的材料、光學及尺寸特性的規范第1部分：固定角膜和鞏膜接觸透鏡規范 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses (ISO 8321-1:2002) |
| EN ISO 8321-2-2000 |
眼科光學接觸透鏡的材料、光學及尺寸特性的規范第2部分：單焦凝膠透鏡 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000) |
| EN ISO 8325-2004 |
牙醫學.旋轉儀器的試驗方法 |
|
| EN ISO 8330-2000 |
橡膠和塑料軟管和軟管組件詞匯 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998) |
| EN ISO 8351-1-1996 |
包裝袋的分類方法第1部分：紙袋 |
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994) |
| EN ISO 8351-2-1996 |
包裝袋的分類方法第2部分：熱塑柔性薄膜袋 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994) |
| EN ISO 8359-1996 |
醫用氧氣濃縮器安全要求 |
Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996) |
| EN ISO 8362-1-2004 |
注射容器及附件.第1部分:玻璃管注射瓶 |
|
| EN ISO 8362-3-2003 |
注射劑用注射器容器及附件 第3部分：注射瓶鋁蓋 |
Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001) |
| EN ISO 8362-4-2004 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| EN ISO 8367-1-1996 |
包裝一般用途包裝袋的尺寸公差第1部分：紙袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993) |
| EN ISO 8367-2-1996 |
包裝一般用途包裝袋的尺寸公差第2部分：熱塑柔性薄膜袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993) |
| EN ISO 8381-2000 |
以乳為基料的嬰兒食品測定脂肪含量重量分析法(參照法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) (ISO 8381:2000) |
| EN ISO 8384-2001 |
船舶與海上技術挖泥船詞匯 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000) |
| EN ISO 8385-1999 |
船舶與海上技術挖泥船分類 |
Ships and marine technology - Dredgers - Classification (ISO 8385:1999) |
| EN ISO 8388-2003 |
針織物 類型 詞匯 |
Knitted fabrics - Types - Vocabulary (ISO 8388:1998) |
| EN ISO 8401-1994 |
金屬覆蓋層延展性的測量方法述評 |
Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986) |
| EN ISO 8420-2002 |
動植物油脂性極化合物量的測定 |
Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002) |
| EN ISO 8429-1996 |
光學與光學儀器眼科學分度盤刻度 |
Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986) |
| EN ISO 8434-1-1997 |
用于流體傳動和一般用途的金屬管接頭第1部分：24度縮式管接頭 |
Metallic tube connections for fluid power and general use - Part 1: 24 degrees compression fittings (ISO 8434-1:1994) |
| EN ISO 8434-4-2000 |
用于流體傳動和一般用途的金屬管接頭第4部分：帶O形圈焊接接頭體的24度錐形管接頭 |
Metallic tube connections for fluid power and general use - Part 4: 24?degrees cone connectors with O-ring weld-on nipples (ISO 8434-4:1995) |
| EN ISO 8442-1-1997 |
與食品接觸的材料和制品刀具與凹形餐具第1部分：準備食物用刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997) |
| EN ISO 8442-2-1997 |
與食品接觸的材料和制品刀具與凹形餐具第2部分：不銹鋼及鍍銀刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997) |
| EN ISO 8442-3-1997 |
與食品接觸的材料和制品刀具與凹形餐具第3部分：銀盤和裝飾性凹盤的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware (ISO 8442-3:1997) |
| EN ISO 8442-4-1997 |
與食品接觸的材料和制品刀具與凹形餐具第4部分：鍍金刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 4: Requirements for gold-plated cutlery (ISO 8442-4:1997) |
| EN ISO 8442-6-2000 |
與食品接觸的材料和制品刀具與凹形餐具第6部分：用漆膜保護的光亮鍍銀餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000) |
| EN ISO 8442-7-2000 |
與食品接觸的材料和制品刀具與凹形餐具第7部分：銀、其他貴金屬及其合金制餐刀的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Specification for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000) |
| EN ISO 8442-8-2000 |
與食品接觸的材料和制品刀具與凹形餐具第8部分：銀制餐具和裝飾性杯盤的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Specification for silver table and decorative holloware (ISO 8442-8:2000) |
| EN ISO 845-1995 |
泡沫塑料和橡膠表觀密度的測定 |
Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988) |
| EN ISO 846-1997 |
塑料微生物作用的評價 |
Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| EN ISO 8467-1995 |
水質高錳酸鹽指數的測定 |
Water quality - Determination of permanganate index (ISO 8467:1993) |
| EN ISO 8468-1994 |
船舶橋樓布置和相關設備要求和指南 |
Ships bridge layout and associated equipment - Requirements and guidelines (ISO 8468:1990) |
| EN ISO 8491-2004 |
金屬材料.管(全截面).彎曲試驗 |
|
| EN ISO 8492-2004 |
金屬材料.管.壓扁試驗 |
|
| EN ISO 8493-2004 |
金屬材料.管.擴口試驗 |
|
| EN ISO 8494-2004 |
金屬材料.管.卷邊試驗 |
|
| EN ISO 8495-2004 |
金屬材料.管.環形擴口試驗 |
|
| EN ISO 8496-2004 |
金屬材料.管.環形拉伸試驗 |
|
| EN ISO 8497-1996 |
絕熱圓管保溫層的穩態傳熱性質的測定 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
| EN ISO 8501-1 Supplement-2001 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的目視評定第1部分的補充信息：用不同磨料噴砂處理時鋼表面 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast |
| EN ISO 8501-1-2001 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的目視評定第1部分：未涂裝的鋼材和全面清除原有涂層后鋼材 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo |
| EN ISO 8501-2-2001 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的目視評定第2部分：局部清除原有涂層后鋼材的銹蝕等級 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| EN ISO 8502-2-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第2部分：清理過的表面上的氯化物的實驗室測定 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992) |
| EN ISO 8502-3-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第3部分：油漆前預處理后的鋼材表面上的灰塵評定 |
Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com