標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 4518-1995 |
金屬鍍層.鍍層厚度的測量.表面光法度輪廓儀法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995 |
| DIN EN ISO 4524-3-1995 |
金屬鍍層.金及金合金電鍍層的試驗方法.第3部分:孔隙率的陽極電解試驗 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995 |
| DIN EN ISO 4524-6-1995 |
金屬鍍層.電鍍金和金合金鍍層的測試方法.第6部分:殘留鹽類的測定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988); German version EN ISO 4524-6:1994 |
| DIN EN ISO 4526-2004 |
金屬涂層.工程用鎳電鍍層 |
|
| DIN EN ISO 4535-1999 |
釉瓷和搪瓷.抗洗滌紡織品用熱洗滌劑溶液性能測定用儀器 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983); German version EN ISO 4535:1998 |
| DIN EN ISO 4536-1995 |
金屬基質上的金屬和無機物涂層.鹽液滴腐蝕試驗(SD試驗) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
| DIN EN ISO 4538-1995 |
金屬鍍層.硫代乙酰胺腐蝕試驗(TAA試驗) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978); German version EN ISO 4538:1995 |
| DIN EN ISO 4541-1995 |
金屬和其它無機物涂層.涂膏密室耐腐蝕試驗(CORR試驗) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
| DIN EN ISO 4543-1995 |
金屬鍍層和其它無機物涂層.適用于儲存情況的腐蝕試驗一般規則 |
Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
| DIN EN ISO 4566-1995 |
艙內安裝發動機的小型船舶.錐度為1:10螺旋漿軸端和尾軸轂 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995 |
| DIN EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空氣中氧化熱穩定性的測定.烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999 |
| DIN EN ISO 4583-1998 |
塑料.環氧樹脂和有關材料.易皂化氯的測定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998); German version EN ISO 4583:1998 |
| DIN EN ISO 4589-1-1999 |
塑料.通過氧指數測定其燃燒性.第1部分:導論 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999 |
| DIN EN ISO 4589-2-1999 |
塑料.通過氧指數測定其燃燒性.第2部分:環境溫度試驗 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999 |
| DIN EN ISO 4590-2003 |
硬質泡沫塑料.開孔和閉孔容積百分?jǐn)?shù)測定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002); German version EN ISO 4590:2003) |
| DIN EN ISO 4597-1-1998 |
塑料.環氧樹脂的硬化劑和促進劑.第1部分:名稱與牌號 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
| DIN EN ISO 4599-1997 |
塑料.耐環境應力龜裂的測定.彎形條塊法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996 |
| DIN EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物樹脂.室溫下增塑劑吸收的測定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
| DIN EN ISO 4610-2002 |
塑料.氯乙烯均聚物和共聚物樹脂.使用氣噴式篩濾器械的篩析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
| DIN EN ISO 4611-2000 |
塑料.濕熱,水濺和鹽霧效果的測定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
| DIN EN ISO 4612-1999 |
塑料.測試用途的聚氯乙烯(PVC)膏料制備.行星式混合器方法 |
Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999 |
| DIN EN ISO 4613-1-1999 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第1部分:名稱與符號及規范. |
Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999 |
| DIN EN ISO 4613-2-1995 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第2部分:試樣制造和性能測定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995 |
| DIN EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和擠塑材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛壓模.可萃取的甲醛的測定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
| DIN EN ISO 4615-2000 |
塑料.未飽和的聚酯和環氧樹脂.氯的總含量的測定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
| DIN EN ISO 4617-2000 |
色漆和清漆.等義術語表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000); German version EN ISO 4617:2000 |
| DIN EN ISO 4618-2-1999 |
漆和涂料.涂層材料的術語和定義.第2部分:漆的特征和性能的專門術語 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999); Trilingual version EN ISO 4618-2:1999 |
| DIN EN ISO 4618-3-1999 |
漆和涂料.涂層材料的術語和定義.第3部分:表面準備和涂層方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999); Trilingual version EN ISO 4618-3:1999 |
| DIN EN ISO 4622-1994 |
色漆和清漆.堆積壓力試驗 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994 |
| DIN EN ISO 4623-1-2002 |
涂料和清漆.耐絲狀腐蝕性的測定 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrate (ISO 4623-1:2000); German version EN ISO 4623-1:2002 |
| DIN EN ISO 4623-2-2004 |
涂料和清漆.耐絲狀腐蝕性的測定.第2部分:鋁襯底 |
|
| DIN EN ISO 4624-2003 |
色漆和清漆.粘附力拉脫試驗 |
(Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002); German version EN ISO 4624:2003) |
| DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第1部分:一般說明和名稱與符號系統 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003); German version EN ISO) |
| DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第1部分:一般說明和名稱與符號系統 |
|
| DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第10部分:絲狀腐蝕等級評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003); German version EN ISO) |
| DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第10部分:絲狀腐蝕等級評定 |
|
| DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第2部分:起泡等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003); German version EN ISO 4628-2:200 |
| DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第2部分:起泡等級的評定 |
|
| DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第3部分:生銹等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003); German version EN ISO 4628-3:2003) |
| DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第3部分:生銹等級的評定 |
|
| DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第4部分:裂紋等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003); German version EN ISO 4628-4:2003) |
| DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第4部分:裂紋等級的評定 |
|
| DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第5部分:剝落等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003); German version EN ISO 4628-5:2003) |
| DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第5部分:剝落等級的評定 |
|
| DIN EN ISO 4628-6-2002 |
涂料和清漆.涂料覆層降解的評定.一般缺陷的程度、數量和大小的規定.第6部分:起霜程度的粘膠帶評定方法 |
Paints and varnishes - Evaluation of degradation of paint coatings; Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990); German version EN ISO 4628-6:2001 |
| DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第7部分:粉化等級評定用絲絨方法 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003); German version E) |
| DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第7部分:粉化等級評定用絲絨方法 |
|
| DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第8部分:劃痕周圍脫層和腐蝕度的評定 |
|
| DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第8部分:劃痕周圍脫層和腐蝕度的評定 |
|
| DIN EN ISO 4629-1998 |
色漆介質.羥值的測定.滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996); German version EN ISO 4629:1998 |
| DIN EN ISO 4651-1995 |
泡沫橡膠和塑料.動態彈性的測定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988); German version EN ISO 4651:1995 |
| DIN EN ISO 4671-2000 |
橡膠和塑料軟管及軟管組件.尺寸測量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
| DIN EN ISO 4672-1999 |
橡膠和塑料軟管低于室溫的柔性試驗 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
| DIN EN ISO 4674-2-1998 |
橡膠或塑料涂層的織物.抗撕裂強度的測定.第2部分:沖擊擺法 |
Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998 |
| DIN EN ISO 472-2002 |
塑料.詞匯 |
Plastics - Vocabulary (ISO 472:1999); German version EN ISO 472:2001 |
| DIN EN ISO 4753-2000 |
緊固件.米制ISO外螺紋零件尾端 |
Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 |
| DIN EN ISO 4757-1994 |
螺釘?shù)氖植?/td>
| Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994 |
| DIN EN ISO 4759-1-2001 |
緊固件公差.第1部分:螺栓、螺釘和墊圈和螺母.產品等級A和C |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3-2000 |
緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.產品等級A和C |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
| DIN EN ISO 4762-1998 |
內六角螺釘 |
Hexagon socket head cap screws (ISO 4762:1997); German version EN ISO 4762:1997 |
| DIN EN ISO 4762-2004 |
內六角圓柱頭螺釘 |
|
| DIN EN ISO 4796-1-2001 |
實驗室玻璃器皿.瓶.第1部分:螺紋頸口瓶 |
Laboratory glassware - Bottles - Part 1: Screw neck bottles (ISO 4796-1:2000); German version EN ISO 4796-1:2000 |
| DIN EN ISO 4796-2-2001 |
實驗室玻璃器皿.瓶.第2部分:錐形頸瓶 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000); German version EN ISO 4796-2:2000 |
| DIN EN ISO 4796-3-2001 |
實驗室玻璃器皿.瓶.第3部分:吸氣瓶 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000); German version EN ISO 4796-3:2000 |
| DIN EN ISO 4823-2001 |
牙科學.彈性印模材料 |
Dentistry - Elastomeric impression materials (ISO 4823:2000); German version EN ISO 4823:2000 |
| DIN EN ISO 4824-2000 |
牙科學.陶瓷托牙牙齒 |
Dentistry - Ceramic denture teeth (ISO 4824:1993 + AMD 1-1997); including Amendment A1:2000; German version EN ISO 4824:1996 + A1:2000 |
| DIN EN ISO 483-1999 |
塑料.恒定值下為保持相對濕度使用水溶液作調節和試驗用的小型外殼 |
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988); German version EN ISO 483:1999 |
| DIN EN ISO 4833-2003 |
食品和動物飼料的微生物學.微生物計數的水平法.30℃時的菌落計數技術 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 鳦 (ISO 4833:2003); German version EN ISO 4833:2003) |
| DIN EN ISO 4869-2-1995 |
聲學.聽力保護器.第2部分:當聽力保護器磨損時影響性的A-重聲壓級的評定 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994); German version EN ISO 4869-2:1995 |
| DIN EN ISO 4869-4-2000 |
聲學.聽力保護器.第4部分:依據壓力回聲的耳罩的有效聲音壓力級別的測量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998); German version EN ISO 4869-4:2000 |
| DIN EN ISO 4871-1997 |
聲學.機器和設備釋放燥音值的公告和驗證 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); German version EN ISO 4871:1996 |
| DIN EN ISO 489-1999 |
塑料.折射指數的測定 |
Plastics - Determination of the refractive index (ISO 489:1999); German version EN ISO 489:1999 |
| DIN EN ISO 4892-1-2001 |
塑料.暴露于實驗室光源的方法.第1部分:通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999); German version EN ISO 4892-1:2000 |
| DIN EN ISO 4892-2-2000 |
塑料.暴露于實驗室光源的方法.第2部分:氙弧燈光源 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994); German version EN ISO 4892-2:1999 |
| DIN EN ISO 4892-3-2000 |
塑料.暴露于實驗室光源的方法.第3部分:UV熒光燈 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994); German version EN ISO 4892-3:1999 |
| DIN EN ISO 4894-1-1999 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和擠塑材料.第1部分:名稱與符號系統和基本規范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997); German version EN ISO 4894-1:1999 |
| DIN EN ISO 4894-2-1999 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和擠塑材料.第2部分:性能的測定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999 |
| DIN EN ISO 4895-1999 |
塑料.液態環氧樹脂.結晶可能性的測定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997); German version EN ISO 4895:1999 |
| DIN EN ISO 4921-2002 |
針織.基本概念.詞匯 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000); German version EN ISO 4921:2001 |
| DIN EN ISO 4934-2004 |
鋼和鐵.硫含量的測定.重力法 |
|
| DIN EN ISO 4957-2001 |
工具鋼 |
Tool steels (ISO 4957:1999); German version EN ISO 4957:1999 |
| DIN EN ISO 505-2000 |
輸送帶.彈性輸送帶抗撕裂擴展性的測定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999); German version EN ISO 505:1999 |
| DIN EN ISO 5079-1996 |
紡織品.纖維.紡織纖維最大拉伸強力和最大拉伸強力延伸的測定 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979); German version EN ISO 5079:1995 |
| DIN EN ISO 5080-1999 |
波羅麻農用細繩 |
Sisal agricultural twines (ISO 5080:1994); German version EN ISO 5080:1999 |
| DIN EN ISO 5084-1996 |
紡織品.紡織品厚度的測定 |
Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996); German version EN ISO 5084:1996 |
| DIN EN ISO 5135-1999 |
聲學.通過混響室測量確定空氣流量,容積流量調節器,節流調節件和閉鎖調節件的噪音的聲功率級 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998 |
| DIN EN ISO 5155-1996 |
家用冷卻器.冷凍器和冰凍器.性能和檢驗方法 |
Household refrigerating appliances - Frozen food storage cabinets and food freezers - Characteristics and test methods (ISO 5155:1995); German version EN ISO 5155:1995 |
| DIN EN ISO 5165-1999 |
石油產品.柴油燃料點火質量的測定.十六烷發動機法 |
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998); German version EN ISO 5165:1998 |
| DIN EN ISO 5167-1-1995 |
用壓差裝置測量流體流量.第1部分:圓截面管道中插入的節流孔板,噴嘴和文杜利管 |
Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full (ISO 5167-1:1991); German version EN ISO 5167-1:1995 |
| DIN EN ISO 5167-1-2004 |
用園截面管道中插入的壓差裝置測量流體流量.第1部分:總體規則和要求 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003) |
| DIN EN ISO 5167-1-2004 |
用園截面管道中插入的壓差裝置測量流體流量.第1部分:總體規則和要求 |
|
| DIN EN ISO 5167-1/A1-1998 |
用壓差裝置測量流體流量.第1部分:圓截面管道中插入的節流孔板,噴嘴和文杜利管.修正A1 |
Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full; Amendment A1 (ISO 5167-1-1991/AMD 1:1998); German version EN ISO 5167-1:1995/ |
| DIN EN ISO 5167-2-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第2部分:節流孔板 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003) |
| DIN EN ISO 5167-2-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第2部分:節流孔板 |
|
| DIN EN ISO 5167-3-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003) |
| DIN EN ISO 5167-3-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴 |
|
| DIN EN ISO 5167-4-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第4部分:文杜利管 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003); German versions EN ISO 5167-4:2003) |
| DIN EN ISO 5167-4-2004 |
用插入圓截面管道中的壓差裝置測量流體流量.第4部分:文杜利管 |
|
| DIN EN ISO 5172-1997 |
焊接,切割和加熱用手工焊槍.規范和試驗 |
Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995); German version EN ISO 5172:1996 |
| DIN EN ISO 5183-1-2000 |
電阻焊接設備.外錐度1:10電極接頭.第1部分:圓錐形接頭,錐度1:10 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000 |
| DIN EN ISO 5183-2-2002 |
電阻點焊.外錐度1:10電極接頭.第2部分:端推力電極用平衡柄接頭(ISO 5183-2:2000) |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002 |
| DIN EN ISO 5198-1999 |
離心式混合軸流泵.液壓性能試驗規程.精密級 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998 |
| DIN EN ISO 5210-1996 |
工業閥門.多圈旋轉閥門驅動器附件 |
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996 |
| DIN EN ISO 5211-2001 |
工業閥門.單圈旋轉型閥門驅動器附件 |
Industrial valves - Part-turn actuator attachments (ISO 5211:2001); German version EN ISO 5211:2001 |
| DIN EN ISO 5263-1-2004 |
紙漿.實驗室濕法分解.第1部分:化學紙漿的分解 |
|
| DIN EN ISO 5263-1997 |
紙漿.實驗室濕法分解 |
Pulps - Laboratory wet disintegration (ISO 5263:1995); German version EN ISO 5263:1997 |
| DIN EN ISO 5263-2-2004 |
紙漿.實驗室濕法分解.第2部分:20 鳦時機械紙漿的分解 |
|
| DIN EN ISO 5263-3-2004 |
紙漿.實驗室濕法分解.第3部分:85 鳦時機械紙漿的分解 |
|
| DIN EN ISO 5264-2-2003 |
紙漿.實驗室打漿.第2部分:PFI碾磨法 |
(Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2002); German version EN ISO 5264-2:2002) |
| DIN EN ISO 5267-1-2000 |
紙漿.排水能力的測定.第1部分:朔 -里格勒法(SCHO-PPER-RIEGLER) |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999); German version EN ISO 5267-1:2000 |
| DIN EN ISO 5269-1-2000 |
紙漿.實驗室物理試驗用紙板制備.第1部分:常規紙制造法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:1998); German version EN ISO 5269-1:2000 |
| DIN EN ISO 5269-1-2005 |
紙漿.物理試驗用實驗室紙張的制備.第1部分:常規紙頁成型法 |
|
| DIN EN ISO 5269-2-2000 |
紙漿.實驗室物理試驗用紙板制備.第2部分:快速KOTHEN方法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K攖hen method (ISO 5269-2:1998); German version EN ISO 5269-2:2000 |
| DIN EN ISO 527-1-1996 |
塑料.拉伸性能測定.第1部分:總則 |
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996 |
| DIN EN ISO 527-2-1996 |
塑料.拉伸性能測定.第2部分:模壓和擠壓塑料試驗條件 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996 |
| DIN EN ISO 527-3 Berichtigung 1-1998 |
對DIN EN ISO 527-3:1995-10的校正 |
Corrigenda to DIN EN ISO 527-3:1995-10 (EN ISO 527-3:1995/AC:1998) |
| DIN EN ISO 527-3-1995 |
塑料.拉伸性能測定.第3部分:薄膜和板的試驗條件 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995); German version EN ISO 527-3:1995 |
| DIN EN ISO 527-3-2003 |
塑料.抗拉性能的測定.第3部分:薄膜和薄板材的試驗條件 |
(Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002) |
| DIN EN ISO 527-4-1997 |
塑料.拉伸性能測定.第4部分:均質和非均質增強纖維塑料復合材料的檢驗條件 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com