標準號 |
中文名稱 |
英文名稱 |
| ISO 5291-1993 |
皮帶傳動.套接標準的三角皮帶用的槽形皮帶輪.槽形斷面AJ,BJ,CJ和DJ(有效系列) |
Belt drives; grooved pulleys for joined classical V-belts; groove sections AJ, BJ, CJ and DJ (effective system) |
| ISO 5292-1995 |
皮帶傳動.三角皮帶和三角肋條皮帶.額定功率的計算 |
Belt drives - V-belts and V-ribbed belts - Calculation of power ratings |
| ISO 5293-1981 |
輸送帶.三個等長導輥的距離變換公式 |
Conveyor belts; Formula for transition distance on three equal length idler rolls |
| ISO 5293-2004 |
輸送帶.三個導輥的最小變換距離的測定 |
|
| ISO 5294-1989 |
同步皮帶驅動.皮帶輪 |
Synchronous belt drives; pulleys |
| ISO 5295-1987 |
同步三角皮帶.額定功率和傳動中心距的計算 |
Synchronous belts; Calculation of power rating and drive centre distance |
| ISO 5296-1-1989 |
同步皮帶驅動.皮帶.第1部分:節距號MXL、XL、L、H、XH和XXH;米制和英制尺寸 |
Synchronous belt drives; belts; part 1: pitch codes MXL, XL, L, H, XH and XXH; metric and inch dimensions |
| ISO 5296-2-1989 |
同步皮帶驅動.皮帶.第2部分:節距號MXL和XXL.米制尺寸 |
Synchronous belt drives; belts; part 2: pitch codes MXL and XXL; metric dimensions |
| ISO 53-1998 |
通用和重型機械的圓柱齒輪.標準基本齒條輪廓 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| ISO 530-1975 |
飛機.一般用途推拉式單極斷路器.尺寸 |
Aircraft; General purpose push-pull single-pole circuit-breakers; Dimensions |
| ISO 5302-2003 |
真空技術.渦輪分子泵.性能特征的測量 |
(Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics) |
| ISO 5302-2003 |
真空技術.渦輪分子泵.性能特征的測量 |
|
| ISO 5306-1983 |
肥料.取樣報告的書寫格式 |
Fertilizers; Presentation of sampling reports |
| ISO 5310-1986 |
肥料.鉀含量的測定.滴定法 |
Fertilizers; Determination of potassium content; Titrimetric method |
| ISO 5311-1992 |
肥料.體(輕拍)密度測定 |
Fertilizers; determination of bulk density (tapped) |
| ISO 5313-1986 |
高含氮量的硝酸銨肥料.存油測定法 |
High nitrogen content, straight ammonium nitrate fertilizers; Determination or oil retention |
| ISO 5314-1981 |
肥料.氨型氮量的測定.蒸餾后滴定法 |
Fertilizers; Determination of ammoniacal nitrogen content; Titrimetric method after distillation |
| ISO 5315-1984 |
肥料.氮總含量的測定.蒸餾后滴定法 |
Fertilizers; Determination of total nitrogen content; Titrimetric method after distillation |
| ISO 5316-1977 |
肥料.水溶性磷酸鹽的萃取 |
Fertilizers; Extraction of water-soluble phosphates |
| ISO 5317-1983 |
肥料.水溶性鉀含量的測定.試驗溶液的制備 |
Fertilizers; Determination of water-soluble potassium content; Preparation of the test solution |
| ISO 5318-1983 |
肥料.鉀含量的測定.苯基硼酸鉀重量分析法(參照法) |
Fertilizers; Determination of potassium content; Potassium tetraphenylborate gravimetric method (Reference method) |
| ISO 532-1975 |
聲學.響度級的計算法 |
Acoustics; Method for calculating loudness level |
| ISO 5320-1980 |
實心木拼花地板.冷杉和云杉鑲條的分類 |
Solid wood parquet; Classification of fir and spruce strips |
| ISO 5321-1978 |
拼花地板用針葉木塊原材.一般特性 |
Coniferous wood raw parquet blocks; General characteristics |
| ISO 5323-1984 |
實心木塊拼花地板和拼花地板料塊.詞匯.三種語言版 |
Solid wood parquet and raw parquet blocks; Vocabulary Trilingual edition |
| ISO 5326-1978 |
實心木鋪砌塊.硬木鋪砌塊.質量要求 |
Solid wood paving blocks; Hardwood paving blocks; Quality requirements |
| ISO 5327-1978 |
實心木鋪砌塊.一般特性 |
Solid wood paving blocks; General characteristics |
| ISO 5328-1978 |
實心木鋪砌塊.軟木鋪砌塊.質量要求 |
Solid wood paving blocks; Softwood paving blocks; Quality requirements |
| ISO 5329-1978 |
實心木鋪砌塊.詞匯.三種語言版 |
Solid wood paving blocks; Vocabulary Trilingual edition |
| ISO 5333-1978 |
拼花地板用針葉木塊原材.拼花地板用冷杉和云杉木塊的分類 |
Coniferous wood raw parquet blocks; Classification of fir and spruce parquet blocks |
| ISO 5334-1978 |
實心木拼花地板.船用松木條的分類 |
Solid wood parquet; Classification of maritime pine strips |
| ISO 534-1988 |
紙和紙板.單頁紙厚度的測定(和紙板表觀密度的計算) |
Paper and board; determination of thickness and apparent bulk density or apparent sheet density |
| ISO 5344-1980 |
產生振動的電動試驗設備.描述設備特性的方法 |
Electrodynamic test equipment for generating vibration; Methods of describing equipment characteristics |
| ISO 5344-2004 |
電動振動產生設備.性能特性 |
|
| ISO 5347-10-1993 |
振動和沖擊傳感器的校正方法.第10部分:強烈沖擊的一級校正法 |
Methods for the calibration of vibration and shock pick-ups; part 10: primary calibration by high impact shocks |
| ISO 5347-11-1993 |
振動和沖擊傳感器的校正方法.第11部分:橫向振動靈敏度的試驗 |
Methods for the calibration of vibration and shock pick-ups; part 11: testing of transverse vibration sensitivity |
| ISO 5347-12-1993 |
振動和沖擊傳感器的校準方法.第12部分:橫向沖擊靈敏性的檢驗 |
Methods for the calibration of vibration and shock pick-ups; part 12: testing of transverse shock sensitivity |
| ISO 5347-13-1993 |
振動和沖擊傳感器的校正方法.第13部分:基本應變靈敏度的試驗 |
Methods for the calibration of vibration and shock pick-ups; part 13: testing of base strain sensitivity |
| ISO 5347-14-1993 |
振動和沖擊傳感器的校正方法.第14部分:鋼滑輪上的無衰減加速度計的共振頻率的試驗 |
Methods for the calibration of vibration and shock pick-ups; part 14: resonance frequency testing of undamped accelerometers on a steel block |
| ISO 5347-15-1993 |
振動和沖擊傳感器的校正方法.第15部分:聲學靈敏度試驗 |
Methods for the calibration of vibration and shock pick-ups; part 15: testing of acoustic sensitivity |
| ISO 5347-16-1993 |
振動和沖擊傳感器的校正方法.第16部分:安裝扭矩靈敏度試驗 |
Methods for the calibration of vibration and shock pick-ups; part 16: testing of mounting torque sensitivity |
| ISO 5347-17-1993 |
振動和沖擊傳感器的校正方法.第17部分:固定溫度靈敏度試驗 |
Methods for the calibration of vibration and shock pick-ups; part 17: testing of fixed temperature sensitivity |
| ISO 5347-18-1993 |
振動和沖擊傳感器的校正方法.第18部分:瞬變溫度靈敏度試驗 |
Methods for the calibration of vibration and shock pick-ups; part 18: testing of transient temperature sensitivity |
| ISO 5347-19-1993 |
振動和沖擊傳感器的校正方法.第19部分:磁場靈敏度試驗 |
Methods for the calibration of vibration and shock pick-ups; part 19: testing of magnetic field sensitivity |
| ISO 5347-22-1997 |
振動和沖擊傳感器的校準方法.第22部分:用普通方法對加速度計作共振試驗 |
Methods for the calibration of vibration and shock pick-ups - Part 22: Accelerometer resonance testing - General methods |
| ISO 5347-3-1993 |
振動和沖擊傳感器的校正方法.第3部分:二級振動校正法 |
Methods for the calibration of vibration and shock pick-ups; part 3: secondary vibration calibration |
| ISO 5347-4-1993 |
振動和沖擊傳感器的校正方法.第4部分:二級沖擊校正法 |
Methods for the calibration of vibration and shock pick-ups; part 4: secondary shock calibration |
| ISO 5347-5-1993 |
振動和沖擊傳感器的校正方法.第5部分:地球引力校正法 |
Methods for the calibration of vibration and shock pick-ups; part 5: calibration by earth`s gravitation |
| ISO 5347-6-1993 |
振動和沖擊傳感器的校正方法.第6部分:一級振動的低頻校正法 |
Methods for the calibration of vibration and shock pick-ups; part 6: primary vibration calibration at low frequencies |
| ISO 5347-7-1993 |
振動和沖擊傳感器的校正方法.第7部分:離心力一級校正法 |
Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge |
| ISO 5347-8-1993 |
振動和沖擊傳感器的校正方法.第8部分:雙離心力一級校正法 |
Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge |
| ISO 5348-1998 |
機械振動和沖擊.加速計的機械安裝 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
| ISO 5349-1-2001 |
機械振動.人體手臂傳輸振動的測量和評價.第1部分:通用要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements |
| ISO 5349-2-2001 |
機械振動.人體手臂傳輸振動的測量和評價.第2部分:在工作場所測量用實用指南 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement in the workplace |
| ISO 535-1991 |
紙和紙板.水吸收性測定.Cobb法 |
Paper and board; determination of water absorptiveness; Cobb method |
| ISO 5350-1 Technical Corrigendum 1-1999 |
紙漿.污物和碎片的測定.第1部分:試驗室紙張的檢驗.技術勘誤1 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets; Technical corrigendum 1 |
| ISO 5350-1-1998 |
紙漿.污物和碎片的測定.第1部分:實驗室紙板的檢驗 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets |
| ISO 5350-2 Technical Corrigendum 1-1999 |
紙漿.污物和碎片的測定.第2部分:磨碎片狀紙漿.技術勘誤1 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp; Technical corrigendum 1 |
| ISO 5350-2-1998 |
紙漿.污物和碎片的測定.第2部分:磨碎的片狀紙漿的檢驗 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp |
| ISO 5350-3-1997 |
紙漿.污物和碎片的測定.第3部分:通過反射光檢驗 |
Pulps - Estimation of dirt and shives - Part 3: Inspection by reflected light |
| ISO 5351-1-1981 |
稀釋液中的纖維素.有限粘度值的測定.第1部分:銅乙二氨(CED)溶液法 |
Cellulose in dilute solutions; Determination of limiting viscosity number; Part 1 : Method in cupri-ethylene-diamine (CED) solution |
| ISO 5351-2004 |
紙漿.銅乙二氨溶液中特性粘度值的測定 |
|
| ISO 5353-1995 |
農業和林業用土方機械、拖拉機和機械設備駕駛座標定點 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point |
| ISO 5355-1997 |
高山滑雪靴.安全要求和試驗方法 |
Alpine ski-boots - Safety requirements and test methods |
| ISO 5356-1-1996 |
麻醉劑和呼吸設備.錐形連接器.第1部分:錐體和插孔 |
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
| ISO 5356-1-2004 |
麻醉和呼吸設備.錐形接頭.第1部分:錐體和錐套 |
|
| ISO 5356-2-1987 |
麻醉劑和呼吸設備.錐形連接器.第2部分:螺紋重力支承連接器 |
Anaesthetic and respiratory equipment; Conical connectors; Part 2 : Screw-threaded weight-bearing connectors |
| ISO 5358-1992 |
人用麻醉機 |
Anaesthetic machines for use with humans |
| ISO 5359-2000 |
醫療氣體用低壓軟管部件 |
Low-pressure hose assemblies for use with medical gases |
| ISO 536-1995 |
紙和紙板.克數的測定 |
Paper and board - Determination of grammage |
| ISO 5360 Technical Corrigendum 1-1998 |
麻醉噴霧器.專用試劑灌充裝置.技術勘誤1 |
Anaesthetic vaporizers - Agent-specific filling systems; Technical Corrigendum 1 |
| ISO 5360-1993 |
麻醉噴霧器.專用試劑灌充裝置 |
Anaesthetic vaporizers; agent-specific filling systems |
| ISO 5361-1999 |
麻醉和呼吸設備.導氣管和連接件 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| ISO 5361-4-1987 |
導氣管.第4部分:柯爾(Cole)型 |
Tracheal tubes; Part 4 : Cole type |
| ISO 5362-2000 |
麻醉劑儲存袋 |
Anaesthetic reservoir bags |
| ISO 5362-2000 |
麻醉劑儲存袋 |
Anaesthetic reservoir bags |
| ISO 5364-2001 |
麻醉和呼吸設備.口咽部導氣管 |
Anaesthetic and respiratory equipment - Oropharyngeal airways |
| ISO 5366-3 Technical Corrigendum 1-2003 |
麻醉和呼吸設備.氣管造口術插管.第3部分:小兒氣管造口術插管.技術勘誤1 |
Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes; Technical Corrigendum 1 |
| ISO 5366-3 Technical Corrigendum 1-2003 |
麻醉和呼吸設備.氣管造口術插管.第3部分:小兒氣管造口術插管.技術勘誤1 |
|
| ISO 5366-3-2001 |
麻醉和呼吸設備.氣管造口術插管.第3部分:小兒氣管造口術插管 |
Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes |
| ISO 5367-2000 |
麻醉儀器和通風機用呼吸管 |
Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| ISO 5372-1978 |
工業(包括食品工業)用濃縮磷酸鹽.砷含量的測定.二乙基二硫代氨基甲酸銀光度法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of arsenic content; Silver diethyldithiocarbamate photometric method |
| ISO 5373-1981 |
工業(包括食品工業)用濃縮磷酸鹽.鈣含量的測定.火焰原子吸收光譜測定法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of calcium content; Flame atomic absorption spectrometric method |
| ISO 5374-1978 |
工業(包括食品工業)用濃縮磷酸鹽.氯化物含量的測定.電位滴定法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of chloride content; Potentiometric method |
| ISO 5375-1979 |
工業(包括食品工業)用濃縮磷酸鹽.氮氧化物含量的測定.3,4-二甲苯酚分光光度法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of oxides of nitrogen content; 3,4- Xylenol spectrophotometric method |
| ISO 5377-1981 |
水解淀粉制品.還原能力和葡萄糖當量的測定.萊恩和埃諾常量滴定法 |
Starch hydrolysis products; Determination of reducing power and dextrose equivalent; Lane and Eynon constant titre method |
| ISO 5378-1978 |
淀粉及其制品.用克耶達法測定氮含量.分光光度法 |
Starches and derived products; Determination of nitrogen content by the Kjeldahl method; Spectrophotometric method |
| ISO 5379-1983 |
淀粉及其制品.二氧化硫含量的測定.酸量滴定法和濁度測定法 |
Starches and derived products; Determination of sulfur dioxide content; Acidimetric method and nephelometric method |
| ISO 5381-1983 |
水解淀粉制品.水含量的測定.改進的卡爾.費歇爾(Kas Figches)法 |
Starch hydrolysis products; Determination of water content; Modified Karl Fischer method |
| ISO 5388-1981 |
固定式空氣壓縮機.安全規則和實用規范 |
Stationary air compressors; Safety rules and code of practice |
| ISO 5389-1992 |
渦輪壓縮機.性能試驗規程 |
Turbocompressors; performance test code |
| ISO 5390-1977 |
壓縮機.分類.兩種語言版 |
Compressors; Classification Bilingual edition |
| ISO 5391-2003 |
風動工具和機器.詞匯 |
|
| ISO 5393-1994 |
螺紋緊固件用旋轉式裝配工具.性能試驗方法 |
Rotary tools for threaded fasteners - Performance test method |
| ISO 5395 AMD 1-1992 |
動力剪草機,草坪拖拉機,草坪和園藝拖拉機,專用割草機和帶割草裝置的草坪和園藝拖拉機.定義,安全要求和試驗規程.修改件1 |
Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions, safety requirements and test procedures; amendment 1 |
| ISO 5395-1990 |
動力剪草機、草坪拖拉機、草坪和園藝拖拉機、專用割草機和帶割草裝置的草坪和園藝拖拉機.定義.安全要求和試驗規程 |
Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions; safety requirements and test procedures |
| ISO 5396-1977 |
硬質合金的鐓鍛模.術語.兩種語言版 |
Hardmetal heading dies; Terminology Bilingual edition |
| ISO 5397-1984 |
皮革.氮含量和皮質”含量的測定.滴定法 |
Leather; Determination of nitrogen content and hide substance; Titrimetric method |
| ISO 5399-1984 |
皮革.水溶性鎂鹽的測定.乙二胺四乙酸滴定法 |
Leather; Determination of water-soluble magnesium salts; EDTA titrimetric method |
| ISO 54-1996 |
通用機械和重型機械的圓柱齒輪.模數和徑節 |
Cylindrical gears for general engineering and for heavy engineering - Modules |
| ISO 540-1995 |
固體礦物燃料.煤灰熔融性的測定.高溫管法 |
Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method |
| ISO 5400-1984 |
皮革.硅總含量的測定.還原硅鉬酸鹽光譜測定法 |
Leather; Determination of total silicon content; Reduced molybdosilicate spectrometric method |
| ISO 5402-2002 |
皮革.物理和機械試驗.用撓曲計測定抗彎性 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method |
| ISO 5403-2002 |
皮革.物理和機械試驗.柔性皮革的耐水性測定 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leather |
| ISO 5404-2002 |
皮革.物理和機械試驗.厚革的耐水性測定 |
Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers |
| ISO 5407-1981 |
用于鐓鍛模的燒結硬質合金片.尺寸和公差 |
As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances |
| ISO 5408-1983 |
柱面螺紋.詞匯.兩種語言版 |
Cylindrical screw threads; Vocabulary Bilingual edition |
| ISO 5413-1993 |
機床.莫氏錐度強制傳動 |
Machine tools; positive drive of morse tapers |
| ISO 5414-1-2002 |
扁方柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第1部分:刀柄驅動系統的尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks |
| ISO 5414-2-2002 |
扁方柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第2部分:夾頭的連接尺寸和名稱與符號 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation |
| ISO 5415-1977 |
7/24外錐度和莫氏內錐度的異徑連接套 |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw |
| ISO 5416-1997 |
直接還原鐵.金屬鐵含量的測定.溴-甲醇滴定法 |
Direct reduced iron - Determination of metallic iron content - Bromine-methanol titrimetric method |
| ISO 5417-1986 |
用于旋轉窯的耐火磚.尺寸 |
Refractory bricks for use in rotary kilns; Dimensions |
| ISO 5418-1-1994 |
鐵礦石.銅含量的測定.第1部分:2,2`-吡奎瑙拉基(Biquinolyl)分光光度法 |
Iron ores - Determination of copper content - Part 1: 2,2`-Biquinolyl spectrophotometric method |
| ISO 5419 Technical Corrigendum 1-1996 |
麻花鉆.術語.定義和類型.技術勘誤1 |
Twist drills - Terms, definitions and types; Technical corrigendum 1 |
| ISO 5419-1982 |
麻花鉆.術語、定義和類型.兩種語言版 |
Twist drills; Terms, definitions and types Bilingual edition |
| ISO 542-1990 |
油料種子.取樣 |
Oilseeds; sampling |
| ISO 5420-1983 |
鉸刀.術語,定義和類型.兩種語言版 |
Reamers; Terms, definitions and types Bilingual edition |
| ISO 5421-1977 |
精磨的高速鋼刀刃 |
Ground high speed steel tool bits |
| ISO 5422-1982 |
道路車輛.拖纜,纜繩或棒的固定 |
Road vehicles; Anchorages for towing ropes, cables or bars |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com