標準號 |
中文名稱 |
英文名稱 |
| BS ISO 1628-5-1998 |
塑料.使用毛細管粘度計在稀溶液中測定聚合物的粘度.第5部分:熱塑性聚酯均聚物和共聚物 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Thermoplastic polyester (TP) homopolymers and copolymers |
| BS ISO 16287-2005 |
滑動軸承.熱塑性軸襯.尺寸和公差 |
|
| BS ISO 1629-1996 |
橡膠和膠乳專用語 |
Rubbers and latices - Nomenclature |
| BS ISO 16305-2005 |
黃油.密實度測定 |
|
| BS ISO 16329-2003 |
船舶和海上技術.高速船舶的航向控制系統 |
(Ships and marine technology - Heading control systems for high-speed craft) |
| BS ISO 16362-2005 |
環境空氣.高效液體色譜法測定粒子相位多環芳烴 |
|
| BS ISO 16366-2001 |
壓力設備.L形導向體 |
Tools for pressing - L-shaped guides |
| BS ISO 16367-2001 |
壓力設備.導板.U形和V形塊 |
Tools for pressing - Guide plates - U- and V-blocks |
| BS ISO 16368-2003 |
移動式升降工作平臺.設計計算、安全要求和試驗方法 |
(Mobile elevating work platforms - Design calculations, safety requirements and test methods) |
| BS ISO 16387-2004 |
土質.污染物對線蚓屬的影響.對繁殖和存活的影響測定 |
|
| BS ISO 1641-1-2003 |
端銑刀和槽銑刀.直柄銑刀 |
(End mills and slot drills - Milling cutters with cylindrical shanks) |
| BS ISO 1641-3-2003 |
端銑刀和槽銑刀.7/24錐柄銑刀 |
(End mills and slot drills - Milling cutters with 7/24 taper shanks) |
| BS ISO 16446-2002 |
船舶和造船技術.海洋環境保護.連接不同管形桿的連接器 |
Ships and marine technology - Marine environmental protection - Adaptor for joining dissimilar boom connectors |
| BS ISO 16458-2004 |
航天系統.不載人航天器運輸.一般要求 |
|
| BS ISO 16462-2004 |
鑲片或?qū)嵭牧⒎叫蔚痂傹X.尺寸和類型 |
|
| BS ISO 16463-2004 |
多晶金剛石鑲?cè)胁寮?尺寸、類型 |
|
| BS ISO 16468-2005 |
熔模鑄件(鋼、鎳合金和鈷合金).一般技術要求 |
|
| BS ISO 1652-2004 |
橡膠膠乳.用布洛克菲爾德試驗方法測定表觀粘度 |
|
| BS ISO 16549-2005 |
紡織材料.纖維繩的不勻性.容量法 |
|
| BS ISO 16549-2005 |
紡織材料.纖維繩的不勻性.容量法 |
|
| BS ISO 16564-2004 |
天然橡膠.用粒度分離色譜法測定平均分子質量和分子質量分布 |
|
| BS ISO 16565-2002 |
橡膠.乙烯-丙烯-二烯三共聚物中5-亞乙基-降冰片烯(ENB)或 二聚環戊二烯(DCPD) 的測定 |
Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers |
| BS ISO 16587-2004 |
機械振動和沖擊.構筑物的工況監控用性能參數 |
|
| BS ISO 16588-2003 |
水質.六復合試劑的測定.氣相色譜法 |
Water quality - Determination of six complexing agents - Gas-chromatographic method |
| BS ISO 16589-1-2002 |
含熱塑性密封件的旋轉軸唇型密封件.額定尺寸和公差 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Nominal dimensions and tolerances |
| BS ISO 16589-2-2002 |
含熱塑性密封件的旋轉軸唇型密封件.詞匯 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Vocabulary |
| BS ISO 16589-3-2002 |
含熱塑性密封件的旋轉軸唇型密封件.儲存、搬運和安裝 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Storage, handling and installation |
| BS ISO 16589-4-2002 |
含熱塑性密封件的旋轉軸唇型密封件.性能測試程序 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Performance test procedures |
| BS ISO 16589-5-2002 |
含熱塑性密封件的旋轉軸唇型密封件.外觀缺陷的標識 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Identification of visual imperfections |
| BS ISO 16603-2004 |
防止接觸血液和體液的防護服.防護服材料防止血液和體液滲透性的測定.使用人造血液的試驗方法 |
|
| BS ISO 16604-2004 |
防止與血液和體液接觸的服裝.服裝材料防血生病原體滲透性的測定.使用Phi-X174噬菌體的試驗方法 |
|
| BS ISO 16609-2004 |
銀行業務.使用對稱技術的消息鑒別要求 |
|
| BS ISO 16642-2003 |
計算機在術語方面的應用.術語標記框架 |
(Computer applications in terminology - Terminological markup framework) |
| BS ISO 16649-1-2001 |
食品和動物飼料的微生物學.β-葡糖苷酸-陽性大腸桿菌計數的水平方法.第1部分:44℃時用薄膜材料和5-溴代-4氯-3-吲哚-D-葡糖苷酸的計群技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of -glucuronidase-positive Escherichia coli - Colony-count technique at 44 鳦 using membranes and 5-bromo-4- chloro-3-indolyl--D-glucuronide |
| BS ISO 16649-2-2001 |
食品和動物飼料的微生物學.β-葡糖苷酸-陽性大腸桿菌計數的水平方法.第2部分:44℃時用薄膜材料和5-溴代-4-氯-3-吲哚β-D-葡糖苷酸的計群技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of -glucuronidase-positive Escherichia coli - Colony-count technique at 44 鳦 using 5-bromo-4-chloro-3-indolyl--D-glucuronide |
| BS ISO 16656-2004 |
液壓傳動.10MPa(100 bar)下使用的缸徑在32mm到100mm的單桿、短沖程氣缸.安裝尺寸 |
|
| BS ISO 16664-2004 |
氣體分析.校正氣體和氣體混合物的處理.指南 |
|
| BS ISO 16700-2004 |
微電子束分析.掃描電子顯微鏡.圖像放大校準指南 |
|
| BS ISO 16701-2003 |
金屬及合金的腐蝕.調節空氣中的腐蝕.暴露于間歇噴灑鹽溶液和潮濕循環受控環境下的加速腐蝕試驗 |
(Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt) |
| BS ISO 16702-2002 |
車間空氣質量.利用 2-(1-methoxyphenyl) piperazine 和液相色譜法測定空氣中異氰酸酯的總含 |
Workplace air quality - Determination of total isocyanate groups in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography |
| BS ISO 16703-2004 |
土質.用氣相色譜法測定C10至C40范圍內的烴含量 |
|
| BS ISO 16712-2005 |
水質.海水或河口沉積物對端足類甲殼動物急性毒性的測定 |
|
| BS ISO 16712-2005 |
水質.海水或河口沉積物對端足類甲殼動物急性毒性的測定 |
|
| BS ISO 16740-2005 |
工作場所空氣.空中漂浮顆粒物質中六價鉻的測定.使用二苯卡巴肼的離子色譜法和分光光度計測量法 |
|
| BS ISO 16770-2004 |
塑料.聚乙烯的環境應力斷裂測定.全切口蠕變?cè)囼?yàn) |
|
| BS ISO 16770-2004 |
塑料.聚乙烯的環境應力斷裂測定.全切口蠕變?cè)囼?yàn) |
|
| BS ISO 16772-2004 |
土質.用水蒸氣原子光譜法或冷蒸氣原子熒光光譜法測定王水土壤萃取物中的汞 |
|
| BS ISO 16805-2005 |
色漆和清漆粘合劑.玻璃化轉變溫度的測定 |
|
| BS ISO 16805-2005 |
色漆和清漆粘合劑.玻璃化轉變溫度的測定 |
|
| BS ISO 16820-2004 |
感官分析.方法學.順序分析 |
|
| BS ISO 16862-2003 |
色漆和清漆.抗凹陷性評定 |
(Paints and varnishes - Evaluation of sag resistance) |
| BS ISO 16869-2002 |
塑料.塑料成份中抑真菌化合物效果的評定 |
Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| BS ISO 16873-2002 |
液壓流體傳動力.壓力開關.安裝表面 |
Hydraulic fluid power - Pressure switches - Mounting surfaces |
| BS ISO 16874-2004 |
液壓傳動.歧管及其件的標識 |
|
| BS ISO 16881-1-2005 |
起重機.軌道輪和相關觸輪滑軌支撐結構的設計計算.總則 |
|
| BS ISO 16889-2000 |
液壓傳動過濾器.評價過濾器件過濾性能的多路法 |
Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element |
| BS ISO 16902-1-2003 |
液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵 |
(Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps) |
| BS ISO 16915-2004 |
鑄模用工具.直澆口拉出器 |
|
| BS ISO 16916-2004 |
壓模工具.注模工具規格單 |
|
| BS ISO 16929-2003 |
塑料.在中間試劑試驗中明確的堆肥處理的條件下塑料的分解度的測定 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| BS ISO 1700-1995 |
電影技術.8mmS型電影原片.剪切和穿孔尺寸 |
Cinematography - 8 mm type S motion-picture raw stock film - Cutting and perforating dimensions |
| BS ISO 17053-2005 |
鋼和鐵.氧測定.經惰性氣體熔化后的紅外線方法 |
|
| BS ISO 17058-2004 |
鋼鐵.砷含量的測定.分光光度法 |
|
| BS ISO 17081-2004 |
氫滲透的測量方法和用電化學法測定金屬中的氫吸收和遷移 |
|
| BS ISO 17082-2004 |
氣壓傳動.閥.供貨商文件中的數據 |
|
| BS ISO 17101-2004 |
農用機械.轉式和甩刀式割草機.拋擲物體試驗和驗收標準 |
|
| BS ISO 17126-2005 |
土質.污染物對土壤植物群影響的測定.萵苣出苗的篩選試驗(萵苣L.) |
|
| BS ISO 17126-2005 |
土質.污染物對土壤植物影響的測定.萵苣出苗的篩選方法(萵苣L.) |
|
| BS ISO 17155-2003 |
土質.用呼吸曲線測定土壤植物群的個體密度和活性 |
Soil quality - Determination of abundance and activity of soil microflora using respiration curves |
| BS ISO 17166-2000 |
紅斑參考作用光譜和標準紅斑劑量 |
Erythema reference action spectrum and standard erythema dose |
| BS ISO 17202-2002 |
紡織品.單絲紗捻度的測定.松勁和上勁法 |
Textiles - Determination of twist in single spun yarns - Untwist/retwist method |
| BS ISO 17239-2004 |
水果、蔬菜及其產品.砷含量的測定.氫化原子吸收光譜法 |
|
| BS ISO 17240-2004 |
水果和蔬菜制品.錫含量的測定.火焰原子吸收光譜法 |
|
| BS ISO 17247-2005 |
煤.最終分析 |
|
| BS ISO 17266-2002 |
電影.35mm電影膠片上多通道邏輯數字聲控圖片和負片,以及70mm電影膠片上數字聲控圖片和負片.正片和寬度尺寸 |
(Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints) |
| BS ISO 17281-2002 |
在適度高負載速度下(GDOWNiDOWNc 和 KDOWNiDOWNc)抗斷裂韌性的測定 |
Plastics - Determination of fracture toughness (GDOWNiDOWNc and KDOWNiDOWNc) at moderately high loading rates (1 m/s) |
| BS ISO 17282-2004 |
塑料.設計數據的獲取和表示指南 |
|
| BS ISO 17282-2004 |
塑料.設計數據的獲取和表示指南 |
|
| BS ISO 17288-1-2002 |
乘用車.無級駕駛.操縱斷開回路試驗方法 |
Passenger cars - Free-steer behaviour - Steering-release open-loop test method |
| BS ISO 17288-2-2004 |
乘用車.無級變速性能.轉向脈沖開環試驗方法 |
|
| BS ISO 17294-1-2004 |
水質.感應耦合等離子體質譜法(ICP-MS)的應用.通用指南 |
|
| BS ISO 17313-2004 |
土質.使用軟壁滲透儀測定飽和多孔材料的水滲導性 |
|
| BS ISO 17331-2005 |
表面化學分析.從硅片工作標準物質表面采集素的化學方法及其全反射X射線熒光光譜法的測定 |
|
| BS ISO 17332-2001 |
電影攝影.印制在35mm移動彩印膠片的生產商的圖像識別信息 |
Cinematography - Manufacturer printed latent image identification information for 35mm motion-picture colour-print film - Specifications |
| BS ISO 17339-2003 |
船舶和海上技術.救生艇和救生船用海錨 |
(Ships and marine technology - Sea anchors for survival craft and rescue boats) |
| BS ISO 17353-2004 |
水質.選定的有機錫化合物的測定.氣相色譜法 |
|
| BS ISO 17355-2003 |
航天數據和信息傳送系統.CCSDS文件送協議 |
(Space data and information transfer systems - CCSDS file delivery protocol) |
| BS ISO 17355-2004 |
航天數據和信息傳送系統.CCSDS文件送協議 |
|
| BS ISO 17355-2004 |
航天數據和信息傳送系統.CCSDS文件送協議 |
|
| BS ISO 17356-2-2005 |
道路車輛.嵌入式機動車裝置用開放式界面.連接OS、COM和NM的OSEK/VDX規范 |
|
| BS ISO 17357-2003 |
船舶和海上技術.高壓浮式充氣橡膠護舷材 |
(Ships and marine technology - High-pressure floating pneumatic rubber fenders) |
| BS ISO 17359-2004 |
機器的工況監測和診斷.通用指南 |
|
| BS ISO 1738-2004 |
黃油.鹽含量的測定 |
|
| BS ISO 17380-2005 |
土質.易釋放的氰化物和氰化物總含量的測定.連續流量分析法 |
|
| BS ISO 17398-2004 |
安全顏色和安全信號.安全信號的分類、特性和持久性 |
|
| BS ISO 17399-2004 |
航天系統.人機集成 |
|
| BS ISO 17410-2001 |
食品和動物飼料的微生物學.psychrotrophic微生物計數的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic micro-organisms |
| BS ISO 17422-2002 |
塑料.環境問題.標準中環境問題一般導則 |
Plastics - Environmental aspects - General guidelines for their inclusion in standards |
| BS ISO 17432-2005 |
醫療信息學.文電和通信.DICOM持續對象的網上存取 |
|
| BS ISO 17433-2003 |
航天數據和信息傳送系統.數據包遙測業務 |
(Space data and information transfer systems - Packet telemetry services) |
| BS ISO 17470-2004 |
微電子束分析.電子探測微觀分析.用波長色散X射線光譜測定法定性點分析指南 |
|
| BS ISO 17493-2001 |
耐熱服裝和設備.用熱空氣循環爐做耐對流熱試驗的試驗方法 |
Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven |
| BS ISO 17497-1-2004 |
聲學.表面的聲音擴散特性.混響室中無規入射擴散系數的測量 |
|
| BS ISO 17531-2002 |
攝影.沖卷藥液.4-(N-乙基-N-2甲基磺酰氨乙基)2-甲苯二胺倍半硫酸鹽水化合物的規范 |
Photography - Processing chemicals - Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
| BS ISO 1754-1998 |
攝影技術.使用35mm膠片和卷筒軟片制版的照相機.畫面尺寸 |
Photography - Cameras using 35 mm film and roll film - Picture sizes |
| BS ISO 17555-2003 |
塑料.薄膜和薄板.雙軸向取向的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films) |
| BS ISO 17556-2003 |
塑料.通過測量呼吸計中的需氧量或放出的二氧化碳量來測定土壤中的最大好氧生物降解能力 |
(Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved) |
| BS ISO 17557-2003 |
塑料.薄膜和薄板.鑄造的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Cast polypropylene (PP) films) |
| BS ISO 17559-2004 |
液壓傳動.電控液壓泵.性能特征測定的試驗方法 |
|
| BS ISO 17560-2002 |
表面化學分析.再生離子質量的光譜測定.硅中硼的深仿形方法 |
Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon |
| BS ISO 17564-2001 |
丁腈橡膠.通過碘值測定氫化丁腈橡膠中的剩余未飽和狀態 |
Nitrile rubber - Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value |
| BS ISO 17604-2003 |
食品和動物飼料的微生物學.微生物分析用尸體取樣 |
(Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis) |
| BS ISO 1762-2002 |
紙、紙板和紙漿.在525℃燃燒時殘留物(灰分)的測定 |
Paper, board and pulps - Determination of residue (ash) on ignition at 525 鳦 |
| BS ISO 17631-2002 |
船舶和航海技術.防火船板、救生器具和疏散設施 |
Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape |
| BS ISO 1766-1999 |
鋪地織物.地毯底層上的毛絨厚度的測定 |
Textile floor coverings - Determination of thickness of pile above the substrate |
| BS ISO 17710-2002 |
塑料.在聚乙胺酯生產中用的聚合物.測定微型滴定法的不飽和等級 |
Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration |
| BS ISO 17724-2003 |
圖形符號.詞匯 |
(Graphical symbols - Vocabulary) |
| BS ISO 17733-2004 |
工作場所空氣.汞和無機汞化合物的測定.低溫蒸氣原子吸收光譜測定法或原子熒光光譜測定法 |
|
| BS ISO 17744-2004 |
塑料.作為溫度和壓力函數的比容的測定(pvT圖).活塞裝置法 |
|
| BS ISO 17771-2003 |
塑料.熱固性模制化合物.SMC中纖維潤濕程度的測定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com