標準號 |
中文名稱 |
英文名稱 |
| ISO 11265-1994 |
土壤.電導性比率的測定 |
(Soil quality - Determination of the specific electrical conductivity) |
| ISO 11266-1994 |
土壤質量.需氧條件下的土壤中生物分解實驗室試驗指南 |
(Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions) |
| ISO 11267-1999 |
土壤質量.由于土壤污染造成的彈尾目真菌的復制的抑制 |
(Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants) |
| ISO 11268-1-1993 |
土質.蚯蚓(惡臭蚯蚓)上有害污物的作用.第1部分:使用人造土壤酶作用物時測定急性毒力的方法 |
(Soil quality; effects of pollutants on earthworms (Eisenia fetida); part 1: determination of acute toxicity using artificial soil substrate) |
| ISO 11268-2-1998 |
土壤質量.利用蚯蚓測定污染物對土壤的影響.第2部分:蚯蚓繁殖對土質影響的測定 |
(Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 2: Determination of effects on reproduction) |
| ISO 11268-3-1999 |
土壤質量.污染對蚯蚓的影響.第3部分:土壤情況影響測定指南 |
(Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on determination of effects in field situations) |
| ISO 11269-1-1993 |
土質.測定土壤植物叢上有害污物的作用.第1部分:根生長抑制測量的方法 |
(Soil quality; determination of the effects of pollutants on soil flora; part 1: method for the measurement of inhibition of root growth) |
| ISO 11269-2-1995 |
土壤質量.土壤植物群污染效力的測定.高級植物增長和外部突出物上的化學藥品的效力 |
(Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of chemicals on the emergence and growth of higher plants) |
| ISO 1127-1992 |
不銹鋼管.尺寸、公差和單位長度的規范質量 |
(Stainless steel tubes; dimensions, tolerances and conventional masses per unit length) |
| ISO 11271-2002 |
土壤質量.氧化還原電勢的測定.現場試驗 |
(Soil quality - Determination of redox potential - Field method) |
| ISO 11272-1998 |
土壤質量.干散密度的測定 |
(Soil quality - Determination of dry bulk density) |
| ISO 11274-1998 |
土壤質量.水分保持特性的測定.實驗室法 |
(Soil quality - Determination of the water-retention characteristic - Laboratory methods) |
| ISO 11275-2004 |
土質.不飽和液體滲導性和水保持特性的測定.風蒸發法 |
|
| ISO 11276-1995 |
土質.孔隙水壓力的測定.土壤濕度計法 |
(Soil quality - Determination of pore water pressure - Tensiometer method) |
| ISO 11277 Technical Corrigendum 1-2002 |
土壤質量.礦質土壤材料顆粒尺寸分布測定.篩分法和沉淀法.技術勘誤1 |
(Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation; Technical Corrigendum 1) |
| ISO 11277-1998 |
土壤質量.礦質土壤材料粒度分布的測定.篩分法和沉淀法 |
(Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation) |
| ISO 11285-2004 |
牛奶.乳糖含量的測定.酶催化方法 |
|
| ISO 11286-1997 |
茶.粒度分析法進行等級分類 |
(Tea - Classification of grades by particle size analysis) |
| ISO 11286-2004 |
茶葉.用粒度分析法進行等級分類 |
|
| ISO 11289-1993 |
密封容器中的加熱食物.pH值的測定 |
(Heat-processed foods in hermetically sealed containers; determination of pH) |
| ISO 1129-1980 |
鍋爐、過熱器和熱交換器用鋼管材.尺寸、公差和常規單位長度的重量 |
(Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length) |
| ISO 11290-1 AMD 1-2004 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第1部分:檢測方法.修改件1:隔離介質和溶血試驗以及包括精確數據的修改 |
|
| ISO 11290-1-1996 |
食品和動物飼料的微生物分析法.單核細胞增多性利斯特菌的計算和橫向檢測法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method) |
| ISO 11290-2 AMD 1-2004 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第2部分:計數方法.修改件1:計數介質的修改 |
|
| ISO 11290-2-1998 |
食品和動物飼料的微生物分析法.單核細胞增多性利斯特菌的計算和橫向檢測法.第1部分:檢測法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method) |
| ISO 11294-1994 |
烘烤后的磨碎的咖啡.水分含量的測定.103度重量損失的方法 |
(Roasted ground coffee - Determination of moisture content - Method by determination of loss in mass at 103 鳦 (Routine method)) |
| ISO 113-1999 |
滾動軸承.止推軸承座.外形尺寸 |
(Rolling bearings - Plummer block housings - Boundary dimensions) |
| ISO 1130-1975 |
紡織纖維.試驗用的幾種取樣方法 |
(Textile fibres; Some methods of sampling for testing) |
| ISO 11303-2002 |
金屬和合金的腐蝕.防大氣腐蝕方法的選擇指南 |
(Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion) |
| ISO 11306-1998 |
金屬和合金的腐蝕.暴露在海水表面的金屬和合金的評定導則 |
(Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water) |
| ISO 11312-2000 |
攝影技術.預壓加工感光材料片.尺寸和相應要求 |
(Photography - Sheets of sensitized materials for the pre-press industry - Dimensions and related requirements) |
| ISO 11314-1995 |
攝影.電影放映機.成象尺度/放映距離的計算 |
(Photography - Projectors - Image size/projection distance calculations) |
| ISO 11315-1-1997 |
攝影.室內投影.第1部分:幻燈機的投影屏照明試驗 |
(Photography - Projection in indoor rooms - Part 1: Screen illumination test for still projectors) |
| ISO 11315-2-1997 |
攝影.室內投影.第2部分:幻燈投影和視頻投影的投影屏照明試驗 |
(Photography - Projection in indoor rooms - Part 2: Screen luminance test for still and video projection) |
| ISO 11315-3-1999 |
攝影.室內投影機.第3部分:透射投影屏的分類和其透射光亮度水平的測定 |
(Photography - Projection in indoor rooms - Part 3: Classification of transmitting projection screens and measurement of their transmitted luminance levels) |
| ISO 11316-1999 |
攝影術.靜態圖片的投影.圖像特性評價的測量方法 |
(Photography - Projection of still pictures - Measuring methods for the evaluation of imaging properties) |
| ISO 11318-2002 |
心臟除顫器.可植入體內的心臟除顫器聯結器系統DF-1.尺寸和試驗要求 |
(Cardiac defibrillators - Connector assembly DF-1 for implantable defibrillators - Dimensional and test requirements) |
| ISO 1132-1-2000 |
滾動軸承.公差.第1部分:術語和定義 |
(Rolling bearings - Tolerances - Part 1: Terms and definitions) |
| ISO 1132-2-2001 |
滾動軸承.公差.第2部分:測量和校驗原理和方法 |
(Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods) |
| ISO 11323-2002 |
鐵礦石和直接軋制鐵.詞匯 |
(Iron ore and direct reduced iron - Vocabulary) |
| ISO 11329-2001 |
液體比重測定.感潮航道中懸浮泥砂遷移的測量 |
(Hydrometric determinations - Measurement of suspended sediment transport in tidal channels) |
| ISO 1133-1997 |
塑料.熱塑塑料熔體質量流速(MFR)和熔體體積流速(MVR)的測定 |
(Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics) |
| ISO 11334-1-1994 |
用胳膊操作的助步器的要求和試驗方法.第1部分:肘支撐器 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches) |
| ISO 11334-4-1999 |
用一只胳膊操作的助步器的要求和試驗方法. 第4部分:具有多于三條腿支撐的步行器扶杖 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs) |
| ISO 11337-2004 |
塑料.聚酰胺.氣相色譜法測定ε-己內酰胺和ω-月桂酰 |
|
| ISO 11338-1-2003 |
固定源排放.氣相和粒相多環芳香烴的測定.第1部分:取樣 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling) |
| ISO 11338-1-2003 |
固定源排放.氣相和粒相多環芳香烴的測定.第1部分:取樣 |
|
| ISO 11338-2-2003 |
固定源排放.氣相和粒相多環芳香烴的測定.第2部分:樣品制備、清潔和測定 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination) |
| ISO 11338-2-2003 |
固定源排放.氣相和粒相多環芳香烴的測定.第2部分:樣品制備、清潔和測定 |
|
| ISO 11339-2003 |
粘合劑.撓性粘合組件的T-剝離試驗 |
(Adhesives - T-peel test for flexible-to-flexible bonded assemblies ) |
| ISO 11339-2003 |
粘合劑.撓性粘合組件的T-剝離試驗 |
|
| ISO 11339-2003 |
粘合劑.撓性粘合組件的T-剝離試驗 |
|
| ISO 1134-1993 |
梨.冷藏 |
(Pears; cold storage) |
| ISO 11341-1994 |
色漆和清漆.人工風化及人工輻射照.濾子化的氙弧輻射照 |
(Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation) |
| ISO 11341-2004 |
色漆和清漆.模擬氣候及模擬輻射曝曬.氙弧燈曝曬 |
|
| ISO 11342 Technical Corrigendum 1-2000 |
機械振動.撓性轉子的機械平衡方法和標準.技術勘誤1 |
(Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors; Technical Corrigendum 1) |
| ISO 11342-1998 |
機械振動.撓性轉子的機械平衡方法和標準 |
(Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors) |
| ISO 11343-2003 |
粘合劑.在沖擊條件下高強度膠粘劑耐動態劈裂的測定.楔形物沖擊法 |
(Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method ) |
| ISO 11343-2003 |
粘合劑.在沖擊條件下高強度膠粘劑耐動態劈裂的測定.楔形物沖擊法 |
|
| ISO 11343-2003 |
粘合劑.在沖擊條件下高強度膠粘劑耐動態劈裂的測定.楔形物沖擊法 |
|
| ISO 11344-2004 |
合成生橡膠.用凝膠滲透色譜法測定溶液聚合物分子質量的分布 |
|
| ISO 11345-1997 |
橡膠.碳黑分散的評估.快速比較法 |
(Rubber - Assessment of carbon black dispersion - Rapid comparative methods) |
| ISO 11346-1997 |
硫化橡膠或熱塑性橡膠.使用阿倫紐斯曲線進行壽命和最高溫度-評定 |
(Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot) |
| ISO 11346-2004 |
硫化或熱塑性橡膠.使用壽命和最高溫度的估計 |
|
| ISO 11346-2004 |
硫化或熱塑性橡膠.使用壽命和最高溫度的估計 |
|
| ISO 11346-2004 |
硫化或熱塑性橡膠.使用壽命和最高溫度的估計 |
|
| ISO 11348-1-1998 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第1部分:使用新制備細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria) |
| ISO 11348-2-1998 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第2部分:使用液體干細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria) |
| ISO 11348-3-1998 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第2部分:使用凍干細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria) |
| ISO 1135-1-1987 |
醫用輸液設備.第1部分:玻璃輸液瓶,塞和塞帽 |
(Transfusion equipment for medical use; Part 1 : Glass transfusion bottles, closures and caps) |
| ISO 1135-3-1986 |
醫用輸液設備.第3部分:取血器具 |
(Transfusion equipment for medical use; Part 3 : Blood-taking set) |
| ISO 1135-4-1998 |
醫用輸血器具.第4部分:一次性使用輸血器 |
(Transfusion equipment for medical use - Part 4: Transfusion sets for single use) |
| ISO 1135-4-2004 |
醫用輸血器具 第4部分:一次性使用輸血器 |
|
| ISO 11357-1-1997 |
塑料.特定掃描量熱法(DSC).第1部分:一般原理 |
(Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles) |
| ISO 11357-2-1999 |
塑料.特定掃描量熱法(DSC).第2部分:玻璃傳導溫度的測定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature) |
| ISO 11357-3-1999 |
塑料.級差掃描量熱術(DSC).第3部分:熔化和結晶焓和溫度的測定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization) |
| ISO 11357-5-1999 |
塑料.差示掃描量熱法(DSC).第5部分:反應溫度、時間、焓和轉化度特征反應曲線的測定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion) |
| ISO 11357-6-2002 |
塑料.差示掃描量熱法(DSC).第6部分:氧化傳導時間的測定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 6: Determiantion of oxidation induction time) |
| ISO 11357-7-2002 |
塑料.差示掃描量熱法(DSC).第7部分:結晶動力的測定 |
(Plastics - Differential scanning calorimetry - (DSC) - Part 7: Determination of crystallization kinetics) |
| ISO 11358-1997 |
塑料.高聚物的熱重分析法(TG).一般原理 |
(Plastics - Thermogravimetry (TG) of polymers - General principles) |
| ISO 11359-1-1999 |
塑料.熱力學分析(TMA).第1部分:一般原理 |
(Plastics - Thermomechanical analysis (TMA) - Part 1: General principles) |
| ISO 11359-2-1999 |
塑料.熱力學分析(TMA).第2部分:線性熱膨脹系數和玻璃化轉變溫度的測定 |
(Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature) |
| ISO 11359-3-2002 |
塑料.熱力學分析(TMA).第3部分:滲透溫度的測定 |
(Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature) |
| ISO 1136-1976 |
羊毛.纖維平均直徑的測定.透氣性法 |
(Wool; Determination of mean diameter of fibres; Air permeability method) |
| ISO 11369-1997 |
水質.固體-液體提取后用UV檢驗液相色譜高功能植物處理劑使用方法的測定 |
(Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction) |
| ISO 11372-1995 |
液化乙炔氣瓶.充氣時間的檢驗 |
(Cylinders for dissolved acetylene - Inspection at time of filling) |
| ISO 11374-1993 |
農用拖拉機和機具.四點式剛性聯結器規范 |
(Agricultural tractors and implements; four-point rigid hitch; specifications) |
| ISO 11375-1998 |
建筑物用建筑機械和設備.術語和定義 |
(Building construction machinery and equipment - Terms and definitions) |
| ISO 11377-1997 |
鋪地織物.地板土.試驗位點的確立和對土的估計 |
(Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation) |
| ISO 11378-1-2000 |
織物地板覆蓋物.實驗室土壤試驗.第1部分:卡帕土壤試驗 |
(Textile floor coverings - Laboratory soiling tests - Part 1: Kappasoil test) |
| ISO 11378-2-2001 |
紡織地板覆蓋物.實驗室土壤試驗.第2部分:轉鼓試驗 |
(Textile floor coverings - Laboratory soiling tests - Part 2: Drum test) |
| ISO 11379-1997 |
鋪地織物.用霧化抽吸器對實驗室清潔的過程 |
(Textile floor coverings - Laboratory cleaning procedure using spray extraction) |
| ISO 1138-1981 |
橡膠配方配合劑.炭黑.硫含量的測定 |
(Rubber compounding ingredients; Carbon black; Determination of sulphur content) |
| ISO 11380-1994 |
光學和光學儀器.眼科光學.鏡片樣板 |
(Optics and optical instruments - Ophthalmic optics - Formers) |
| ISO 11381-1994 |
光學和光學儀器.眼科光學.螺紋 |
(Optics and optical instruments - Ophthalmic optics - Screw threads) |
| ISO 1139-1973 |
紡織品.紗線的名稱和牌號 |
(Textiles; Designation of yarns) |
| ISO 11393-1-1998 |
手持式鏈鋸使用者用防護服裝.第1部分:抗鏈鋸切割試驗用由飛輪驅動的試驗機械 |
(Protective clothing for users of hand-held chain-saws - Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw) |
| ISO 11393-2-1999 |
手持式鏈鋸使用者用防護服裝.第2部分:護腿的性能要求和試驗方法 |
(Protective clothing for users of hand-held chain-saws - Part 2: Test methods and performance requirements for leg protectors) |
| ISO 11393-3-1999 |
手持式鏈鋸使用者用防護服裝.第3部分:鞋靴的試驗方法 |
(Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear) |
| ISO 11393-4-2003 |
手持式鏈鋸使用者用防護服裝.第4部分:防護手套試驗方法和性能要求 |
|
| ISO 11393-5-2001 |
手持式鏈鋸使用者的防護服裝.第5部分:防護綁腿的試驗方法和性能要求 |
(Protective clothing for users of hand-held chain-saws - Part 5: Test methods and performance requirements for protective gaiters) |
| ISO 11399-1995 |
熱環境的人類工效學.相關國際標準的原理和應用 |
(Ergonomics of the thermal environment - Principles and application of relevant international standards) |
| ISO 1140-1990 |
繩索.聚酰胺繩索.規范 |
(Ropes; polyamide; Specification) |
| ISO 1140-2004 |
纖維繩索.聚酰胺繩索.3、4 和8股絞繩 |
|
| ISO 11400-1992 |
鎳、鎳鐵和鎳合金.磷含量測定.二氧磷釩鉬分子吸收光譜法 |
(Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method) |
| ISO 11401-1993 |
塑料.酚醛樹脂.用液相色譜法分離 |
(Plastics; phenolic resins; separation by liquid chromatography) |
| ISO 11402-1993 |
塑料.縮聚樹脂.游離甲醛的測定 |
(Plastics; condensation resins; determination of free formaldehyde) |
| ISO 11402-2004 |
酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 |
|
| ISO 11402-2004 |
酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 |
|
| ISO 11403-1-2001 |
塑料.可比較多點數據的采集和表示.第1部分:機械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties) |
| ISO 11403-2-1995 |
塑料.可比較多點數據的采集和表示.第2部分:熱處理性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties) |
| ISO 11403-3-1999 |
塑料.可比多點數據的采集和表示.第3部分:環境對性能的影響 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties) |
| ISO 11406-2001 |
商用道路車輛.帶尾部連接器的牽引車輛和掛鉤掛車間的機械連接器.互換性 |
(Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability) |
| ISO 11407-2004 |
商用道路車輛.尾部帶向前和向下連接器的牽引車和中軸掛車間的機械連接.互換性 |
|
| ISO 11408-1999 |
化學轉化膜覆層.鐵和鋼上的黑色氧化覆層.規范和試驗方法 |
(Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods) |
| ISO 11409-1993 |
塑料.酚醛樹脂.用差別掃描量熱法測定反應熱和反應溫度 |
(Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry) |
| ISO 1141-1990 |
繩索.聚酯繩索.規范 |
(Ropes; polyester; Specification) |
| ISO 1141-2004 |
纖維繩索.聚酯繩索.3、4 和8股絞繩 |
|
| ISO 11412-1998 |
鋁制品用碳素材料.煅燒焦炭.水含量測定 |
(Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content) |
| ISO 11413-1996 |
塑料管及其配件.聚乙烯管和電熔配件之間的試驗管接頭部件的制備 |
(Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com