標準號 |
中文名稱 |
英文名稱 |
| ISO 11979-3-1999 |
眼科植入物.眼內透鏡.第3部分:機械特性和試驗方法 |
(Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods) |
| ISO 11979-4-2000 |
眼科植入物.眼內透鏡.第4部分:貼標簽和信息 |
(Opthalmic implants - Intraocular lenses - Part 4: Labelling and information) |
| ISO 11979-5-1999 |
眼科植入物.眼內透鏡.第5部分:生物相容性 |
(Ophtalmic implants - Intraocular lenses - Part 5: Biocompatibility) |
| ISO 11979-6-2002 |
眼科植入物.眼內透鏡.第6部分:儲存期限和運輸穩定性 |
(Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability) |
| ISO 11979-7-2001 |
眼科植入物.眼內晶狀體透鏡.第7部分:門診調查 |
(Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations) |
| ISO 11979-8 Technical Corrigendum 1-2003 |
眼科植入物.眼內透鏡.第8部分:基本要求.技術勘誤1 |
(Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements; Technical Corrigendum 1 ) |
| ISO 11979-8 Technical Corrigendum 1-2003 |
眼科植入物.眼內透鏡.第8部分:基本要求.技術勘誤1 |
|
| ISO 11979-8-1999 |
眼科植入物.眼內透鏡.第8部分:基本要求 |
(Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements) |
| ISO 1198-1972 |
飛機的密封光束著陸燈.尺寸 |
(Sealed-beam landing lamps for aircraft; Dimensions) |
| ISO 11980-1997 |
眼科光學.接觸鏡片和接觸鏡片保護產品.臨床檢測指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations) |
| ISO 11981-1999 |
眼科光學.接觸鏡片和接觸鏡片保護產品.接觸鏡片用接觸鏡片保護產品物理一致性的測定 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses) |
| ISO 11984-1999 |
眼科光學.接觸鏡片.剛性鏡片彎曲和斷裂強度的測定 |
(Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage) |
| ISO 11985-1997 |
眼科光學.接觸透鏡.紫外線輻射的老化試驗(用微鏡法) |
(Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method)) |
| ISO 11986-1999 |
眼科光學.接觸鏡片和接觸鏡片保護產品.緊張和放松狀態下保持測定指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for determination of preservative uptake and release) |
| ISO 11987-1997 |
眼科光學.接觸鏡片.保質期的測定 |
(Ophthalmic optics - Contact lenses - Determination of shelf-life) |
| ISO 11990-2003 |
光學和光學儀器.激光和激光設備.氣管柄激光抗性的測定 |
(Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts) |
| ISO 11990-2003 |
光學和光學儀器.激光和激光設備.氣管柄激光抗性的測定 |
|
| ISO 11992-1-2003 |
道路車輛.牽引車和拖掛車之間電氣連接數字信息的交換.第1部分:物理層和數據鏈層 |
(Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layer) |
| ISO 11992-1-2003 |
道路車輛.牽引車和拖掛車之間電氣連接數字信息的交換.第1部分:物理層和數據鏈層 |
|
| ISO 11992-2-2003 |
道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第2部分:制動和傳動裝置用應用層 |
(Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear ) |
| ISO 11992-2-2003 |
道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第2部分:制動和傳動裝置用應用層 |
|
| ISO 11992-3-2003 |
道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第3部分:不包括制動和傳動裝置的設備用應用層 |
(Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear ) |
| ISO 11992-3-2003 |
道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第3部分:不包括制動和傳動裝置的設備用應用層 |
|
| ISO 11994-1997 |
起重機.有效性.詞匯 |
(Cranes - Availability - Vocabulary) |
| ISO 11995-1996 |
飛行器.裝載和運行設備穩定性要求 |
(Aircraft - Stability requirements for loading and servicing equipment) |
| ISO 11997-1 Technical Corrigendum 1-1998 |
色漆和清漆.耐周期性腐蝕的測定.第1部分:濕的(鹽霧)/干的/濕度.技術勘誤1 |
(Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity; Technical Corrigendum 1) |
| ISO 11997-1-1998 |
涂料和清漆.耐周期性腐蝕的測定.第1部分:濕的(鹽霧)/干的/濕度 |
(Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity) |
| ISO 11997-2-2000 |
涂料和清漆.耐周期性腐蝕的測定.第2部分:濕的(鹽霧)/干的/濕度/紫外線光 |
(Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light) |
| ISO 11998-1998 |
涂料和清漆.涂層耐濕式洗滌和可清洗性測定 |
(Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings) |
| ISO 12-1987 |
航空航天.管道.識別 |
Aerospace; Pipelines; Identification |
| ISO 120-1977 |
塑料.酚-甲醛模塑.游離氨和銨化合物的測定.比色法 |
(Plastics; Phenol-formaldehyde mouldings; Determination of free ammonia and ammonium compounds; Colorimetric comparison method) |
| ISO 12000-2000 |
塑料/橡膠.聚合物的分散及橡膠乳(天然的和合成的).定義和試驗方法的檢驗 |
(Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods) |
| ISO 12001-1996 |
聲學.機械設備產生的噪聲.噪聲試驗規程的介紹和起草規則 |
(Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code) |
| ISO 12003-1-2002 |
農林業用拖拉機.窄軌距輪式拖拉機.第1部分:前懸掛傾翻保護裝置 |
(Agricultural and forestry tractors - Narrow-track wheeled tractors - Part 1: Front-mounted roll-over protective structures) |
| ISO 12003-1-2002 |
農林業用拖拉機.窄軌距輪式拖拉機.第1部分:前懸掛傾翻保護裝置 |
|
| ISO 12003-2-2002 |
農林業用拖拉機.窄軌距輪式拖拉機.第2部分:后懸掛傾翻保護裝置 |
(Agricultural and forestry tractors - Narrow-track wheeled tractors - Part 2: Rear-mounted roll-over protective structures) |
| ISO 12003-2-2002 |
農林業用拖拉機.窄軌距輪式拖拉機.第2部分:后懸掛傾翻保護裝置 |
|
| ISO 12004-1997 |
金屬材料.成形極限圖示測定指南 |
(Metallic materials - Guidelines for the determination of forming-limit diagrams) |
| ISO 12004-1997 |
金屬材料 成形極限圖示測定指南 |
|
| ISO 12005-2003 |
激光和激光設備.激光束參數的試驗方法.偏振 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization) |
| ISO 12005-2003 |
激光和激光設備.激光束參數的試驗方法.偏振 |
|
| ISO 12006-2-2001 |
建筑施工.施工作業的信息組織.第2部分:信息分類的框架 |
(Building construction - Organization of information about construction works - Part 2: Framework for classification of information) |
| ISO 12017-1995 |
塑料.聚甲基丙烯酸甲酯雙合板和三合板的試驗方法 |
(Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods) |
| ISO 1202-1981 |
香精油.1,8-桉樹腦含量的測定 |
(Essential oils; Determination of 1,8-cineole content) |
| ISO 12020-1997 |
水的質量.用原子吸收光譜測定法測定鋁 |
(Water quality - Determination of aluminium - Atomic absorption spectrometric methods) |
| ISO 12021-1-1996 |
道路車輛.對外部風壓的敏感度.第1部分:利用風力發送進行的開放回路試驗方法 |
(Road vehicles - Sensitivity to lateral wind - Part 1: Open-loop test method using wind generator input) |
| ISO 1203-1998 |
攝影技術.膠卷照相機.后窗位置 |
Photography - Roll film cameras - Back window location |
| ISO 12039-2001 |
靜止源發射.一氧化碳,二氧化碳和氧氣的測定.自動測量系統的校準和性能特性 |
(Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems) |
| ISO 1204-1990 |
往復式內燃機.旋轉方向的規定 |
Reciprocating internal combustion engines; designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine |
| ISO 12040-1997 |
印刷技術.印刷和印刷油墨.使用過濾氙弧燈評價色牢度 |
(Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light) |
| ISO 12043-1995 |
滾子軸承.單列角面接觸的球軸承.平擋圈和無活塞脹圈槽之間的突緣的倒棱尺寸 |
Roller bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
| ISO 12044-1995 |
滾子軸承.單列角面接觸的球軸承.外圈無測推力邊的倒棱尺寸 |
Roller bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
| ISO 12046-1995 |
同步皮帶傳動.自動皮帶.物理特性的測定 |
Synchronous belt drives - Automotive belts - Determination of physical properties |
| ISO 12048-1994 |
包裝.完成,填充運輸包裝.壓力試驗機用壓力試驗和堆積試驗 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
| ISO 12056-1996 |
飛行器.大容積飛行器用自動推進乘客扶梯.性能要求 |
Aircraft - Self-propelled passenger stairs for large capacity aircraft - Functional requirements |
| ISO 12058-1-1997 |
塑料.使用落球粘度計測定粘度.第1部分:斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method |
| ISO 1206-2001 |
滾動軸承.滾針軸承尺寸系列48,49,69.邊界尺寸和公差 |
Rolling bearings - Needle roller bearings, dimension series 48, 49 und 69 - Boundary dimensions and tolerances |
| ISO 1207-1992 |
一字槽圓柱頭螺釘.A級產品 |
Slotted cheese head screws; product grade A |
| ISO 12076-2002 |
鋼絲繩.彈性的實際模量的測定 |
Steel wire ropes - Determination of the actual modulus of elasticity |
| ISO 1208-1982 |
香料和調味品.污物的測定 |
Spices and condiments; Determination of filth |
| ISO 12080-1-2000 |
干脫脂奶.維生素A含量的測定.第1部分:比色法 |
Dried skimmed milk - Determination of vitamin A content - Part 1: Colorimetric method |
| ISO 12080-2-2000 |
干脫脂奶.維生素A含量的測定.第2部分:高性能液相色譜法 |
Dried skimmed milk - Determination of vitamin A content - Part 2: Method using high-performance liquid chromatography |
| ISO 12081-1998 |
牛奶.鈣含量的測定.滴定法 |
Milk - Determination of calcium content - Titrimetric method |
| ISO 12082-1997 |
經過處理的乳酪和乳酪制品.添加的檸檬酸鹽乳化劑和表示為檸檬酸的酸化劑/pH值控制劑的含量測定 |
Processed cheese and processed cheese products - Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid |
| ISO 12083-1994 |
信息和文獻.電子手稿的制備和原稿標注 |
Information and documentation - Electronic manuscript preparation and markup |
| ISO 12085 Technical Corrigendum 1-1998 |
幾何制品規范(GPS).表面紋理:輪廓法.主要參數.技術勘誤1 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters; Technical Corrigendum 1) |
| ISO 12085-1996 |
幾何制品規范(GPS).表面特征:外形法.主要參數 |
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters |
| ISO 12086-1-1995 |
塑料.含氟聚合物的分散、模塑和擠塑材料.第1部分:名稱與符號系統和基本規范 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications) |
| ISO 12086-2-1995 |
塑料.含氟聚合物的分散、模塑和擠塑材料.第2部分:試樣制備和性能測定 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties) |
| ISO 1209-1-1990 |
硬質泡沫塑料.撓曲試驗.第1部分:撓曲性的測定 |
(Cellular plastics, rigid; flexural tests; part 1: bending test) |
| ISO 1209-1-2004 |
硬性泡沫塑料.彎曲特性的測定.第1部分:基本彎曲試驗 |
|
| ISO 1209-2-1990 |
硬質泡沫塑料.撓曲試驗.第2部分:撓曲性的測定 |
(Cellular plastics, rigid; flexural tests; part 2: determination of flexural properties) |
| ISO 1209-2-2004 |
硬質泡沫塑料.彎曲性能的測定.第2部分:撓曲強度和彈性的表面彎曲模量的測定 |
|
| ISO 12091-1995 |
結構墻用熱塑性塑料管.烘爐試驗 |
(Structured-wall thermoplastics pipes - Oven test) |
| ISO 12092-2000 |
壓力管道用配件、閥門以及其它由未增塑聚氯乙烯、氯化聚乙烯、丙烯腈-丁二烯-苯乙烯共聚物和丙烯腈-苯乙烯- |
(Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure - |
| ISO 12094-1994 |
壓力焊接鋼管.焊接鋼管制造時帶鋼/鋼板疊層不完整性檢驗的超聲檢驗 |
(Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes) |
| ISO 12095-1994 |
壓力無縫鋼管和壓力焊接鋼管.液體滲透檢驗 |
(Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing) |
| ISO 12096-1996 |
抗壓力用埋弧焊接鋼管.不完全探測含縫用放射性試驗 |
(Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections) |
| ISO 12097-1-2002 |
道路車輛.安全氣球零部件.第1部分:詞匯 |
(Road vehicles - Airbag components - Part 1: Vocabulary) |
| ISO 12097-2-1996 |
道路車輛.空氣囊組件.第2部分:氣囊組件的試驗 |
(Road vehicles - Airbag components - Part 2: Testing of airbag modules) |
| ISO 12097-3-2002 |
道路車輛.空氣囊零部件.第3部分:充氣機組合件的檢驗 |
(Road vehicles - Airbag components - Part 3: Testing of inflator assembly) |
| ISO 12098 Technical Corrigendum 1-2001 |
24V系統的商用車輛.牽引車和拖車間的15極連接器.尺寸和觸點配置.技術勘誤1 |
(Commercial vehicles with 24 V systems - 15-pole connectors between towing vehicles and trailers - Dimensions and contact allocation; Technical Corrigendum 1) |
| ISO 12098-1994 |
帶24V系統的商用車輛.牽引車和拖車間的15桿連接器.尺寸和接線配置 |
(Commercial vehicles with 24 V systems - 15-pole connectors between towing vehicles and trailers - Dimensions and contact allocation) |
| ISO 12098-2004 |
公路車輛.牽引車和掛車之間電氣連接用連接器.具有24V標稱電源電壓的車輛用15極連接器 |
|
| ISO 12100-1-2003 |
機械安全.基本概念和設計通則.第1部分:基本術語、方法學 |
|
| ISO 12100-2-2003 |
機械安全.基本概念和設計通則.第2部分:技術原理 |
|
| ISO 12103-1-1997 |
道路車輛.過濾器評價塵土試驗.第1部分:塵土試驗方法 |
(Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust) |
| ISO 12103-2-1997 |
道路車輛.過濾器評定用試驗用粉塵.第2部分:氧化鋁試驗粉塵 |
(Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust) |
| ISO 12106-2003 |
金屬材料.疲勞試驗.軸向應變控制法 |
(Metallic materials - Fatigue testing - Axial-strain-controlled method ) |
| ISO 12106-2003 |
金屬材料.疲勞試驗.軸向應變控制法 |
|
| ISO 12107-2003 |
金屬材料.疲勞試驗.數據的統計規劃和分析 |
(Metallic materials - Fatigue testing - Statistical planning and analysis of data) |
| ISO 12107-2003 |
金屬材料.疲勞試驗.數據的統計規劃和分析 |
|
| ISO 12108-2002 |
金屬材料.疲勞試驗.疲勞裂痕增長試驗 |
(Metallic materials - Fatigue testing - Fatigue crack growth method) |
| ISO 1211-1999 |
牛奶.脂肪含量的測定.重量分析法(基準方法) |
(Milk - Determination of fat content - Gravimetric method (Reference method)) |
| ISO 12114-1997 |
纖維增強塑料.熱固性模塑化合物和聚酯膠片.固化特性的測定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics) |
| ISO 12115 Technical Corrigendum 1-1998 |
纖維增強塑料.熱固模塑復合物和預浸料坯.流動能力、成熟期和適用期的測定.技術勘誤1 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life; Technical Corrigendum 1) |
| ISO 12115-1997 |
纖維增強塑料.熱固性模塑化合物和聚酯膠片.流動能力和儲存期限的測定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life) |
| ISO 12117 Technical Corrigendum 1-2000 |
土方機械.壓實挖掘機的傾翻防護結構(TOPS).實驗室試驗和性能要求.技術勘誤1 |
(Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements; Technical Corrigendum 1) |
| ISO 12117-1997 |
土方機械.壓實挖掘機的傾翻防護結構(TOPS).實驗室試驗和性能要求 |
(Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements) |
| ISO 12118-1995 |
空運貨物用設備 |
(Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22250 N (5000 lbf) or above) |
| ISO 1212-1995 |
蘋果的冷藏 |
(Apples - Cold storage) |
| ISO 12123-1996 |
散裝的和預先成型未加工的光學玻璃.氣泡和其他夾雜物.試驗方法和分類 |
(Raw optical glass in bulk and preshaped forms - Bubbles and other inclusions - Test method and classification) |
| ISO 12124-2001 |
聲學.助聽器真耳特性測量的過程 |
(Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids) |
| ISO 12125-1997 |
帶有米制細牙間距螺紋和法蘭(非金屬插入物)的經常作用扭矩型六角螺母.產品等級A和B |
(Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread - Product grades A and B) |
| ISO 12126-1997 |
帶米制細節距螺紋的長效扭矩式全金屬六角凸緣螺母 |
(Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread - Product grades A and B) |
| ISO 12127-1996 |
防熱和防火防護服.透過防護服或其材料對散發接觸熱量的測定 |
(Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials) |
| ISO 12128-2001 |
滑動軸承.潤滑孔、滑槽和油腔.軸承襯套的尺寸、類型、命名及其應用 |
(Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes) |
| ISO 12129-1-1995 |
滑動軸承.第1部分:配合 |
(Plain bearings - Part 1: Fits) |
| ISO 12129-2-1995 |
滑動軸承.第2部分:轉軸的形位公差和表面粗糙度.法蘭和止推環 |
(Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars) |
| ISO 1213-1-1993 |
固體礦物燃料.詞匯.第1部分:采煤術語 |
(Solid mineral fuels; vocabulary; part 1: terms relating to coal preparation) |
| ISO 1213-2-1992 |
固體礦物燃料.詞匯.第2部分:與采樣、試驗和分析有關的術語 |
Solid mineral fuels; vocabulary; part 2: terms relating to sampling, testing and analysis |
| ISO 12130-1-2001 |
滑動軸承.穩態條件下流體動力滑動斜墊止推軸承.第1部分:斜墊止推軸承的計算 |
(Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings) |
| ISO 12130-2-2001 |
滑動軸承.穩態條件下流體動力滑動斜墊止推軸承.第2部分:斜墊止推軸承的計算函數 |
(Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings) |
| ISO 12130-3-2001 |
滑動軸承.穩態條件下流體動力滑動斜墊止推軸承.第3部分:斜墊止推軸承的計算的指導值 |
(Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings) |
| ISO 12131-1-2001 |
水平軸承.在穩定條件下的流體動力水平止推片軸承.第1部分:止推片軸承的計算 |
(Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings) |
| ISO 12131-2-2001 |
滑動軸承.在穩定條件下的流體動力滑動止推片軸承.第2部分:止推片軸承的計算函數 |
Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings |
| ISO 12131-3-2001 |
水平軸承.在穩定條件下的流體動力水平止推片軸承.第3部分:止推片軸承計算的指南值 |
Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings |
| ISO 12132-1999 |
水平軸承.薄壁半軸承質量評價.FMEA設計 |
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
| ISO 12135-2002 |
金屬材料.準靜態斷裂韌性測定的統一試驗方法 |
Metallic materials - Unified method of test for the determination of quasistatic fracture toughness |
| ISO 12137-1 Technical Corrigendum 1-1998 |
涂料和清漆.耐損傷力的測定.第1部分:利用曲線描形針法.技術勘誤1 |
Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus; Technical Corrigendum 1 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com