標準號 |
中文名稱 |
英文名稱 |
| ISO 8901-2003 |
養殖的苦橙葉油(Citrus aurantium L.) |
(Oil of bitter orange petitgrain, cultivated (Citrus aurantium L.) ) |
| ISO 8901-2003 |
養殖的苦橙葉油(Citrus aurantium L.) |
|
| ISO 8902-1999 |
法國型雜薰衣草油 |
Oil of lavandin Grosso [Lavandula angustifolia Miller ?Lavandula latifolia (L.f.) Medikus], French type |
| ISO 8903-1994 |
闊葉樹鋸材的公稱尺寸 |
Broadleaved sawn timber - Nominal sizes |
| ISO 8904-1990 |
闊葉樹鋸材.尺寸.測量方法 |
Broadleaved sawn timber; sizes; methods of measurement |
| ISO 8905-1988 |
鋸材.試驗方法.與紋理平行剪切極限強度的測定 |
Sawn timber; test methods; determination of ultimate strength in shearing parallel to grain |
| ISO 8906-1988 |
鋸材.試驗方法.抗局部橫向壓縮的測定 |
Sawn timber; test methods; determination of resistance to local transverse compression |
| ISO 8910 DAM 1-1992 |
修改1 |
Machinery and equipment for working the soil; mouldboard ploughs; working elements; vocabulary; amendment 1 |
| ISO 8910-1993 |
土壤耕作機械和設備.有壁犁耕作部件.詞匯 |
Machinery and equipment for working the soil; mouldboard plough working elements; vocabulary |
| ISO 8912-1986 |
耕作土壤的設備.壓輥截面.連接器和截面寬度 |
Equipment for working the soil; Roller sections; Coupling and section width |
| ISO 8913-1994 |
航空航天.標準重量以下的四氧乙烯(PTFE)軟管裝置,21000KPa/204℃類.采購規范 |
Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21000 kPa - Procurement specification |
| ISO 8914-1990 |
微生物學.副血溶解弧菌檢驗的一般導則 |
Microbiology; general guidance for the detection of Vibrio parahaemolyticus |
| ISO 8915-1987 |
工業用輕質烯烴.微量氯的測定.威克博爾德(Wickbold)燃燒法 |
Light olefins for industrial use; Determination of traces of chlorine; Wickbold combustion method |
| ISO 8916-1988 |
工業用乙烯.痕量極性化合物的測定.用低溫洗氣技術制備冷凝試樣 |
Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique |
| ISO 8917-1988 |
工業用輕質烯烴.水的測定.流線分析器的導則 |
Light olefins for industrial use; determination of water; guidelines for use of in-line analysers |
| ISO 8918-1996 |
螢石.技術等級.化學成分和物理特性 |
Fluorspar - Technical grades - Chemical composition and physical characteristics |
| ISO 8925 AMD 1-1997 |
土方機械.檢查孔.修訂件1 |
Earth-moving machinery - Diagnostic ports; Amendment 1 |
| ISO 8925-1989 |
土方機械.檢查孔 |
Earth-moving machinery; diagnostic ports |
| ISO 8927-1991 |
土方機械.機器的可用性.詞匯 |
Earth-moving machinery; machine availability; vocabulary |
| ISO 893-1989 |
表面活性劑.工業用鏈烷磺酸鈉.分析方法 |
Surface active agents; technical alkane sulfonates; methods of analysis |
| ISO 8930-1987 |
結構可靠性的一般原則.等義術語表.三種語言版 |
General principles on reliability for structures; List of equivalent terms Trilingual edition |
| ISO 8935-1990 |
農業和林業拖拉機.外部設備控制器的安裝座和開口 |
Tractors for agriculture and forestry; mountings and apertures for external equipment controls |
| ISO 8936-2003 |
敞篷車遮篷.安全要求 |
Caravan awnings - Safety requirements |
| ISO 8936-2003 |
敞篷車遮篷.安全要求 |
|
| ISO 8937-2000 |
敞篷車遮篷.功能要求和試驗方法 |
Caravan awnings - Functional requirements and test methods |
| ISO 894-1977 |
表面活性劑.工業用伯烷基硫酸鈉.分析方法 |
Surface active agents; Technical sodium primary alkylsulphates; Methods of analysis |
| ISO 8940-2002 |
航空航天.錨式自鎖密封自定位雙耳沉孔螺母.級別:900MPa/120℃,900MPa/175℃,C級和900MPa/235℃.尺寸 |
Aerospace - Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 鳦, 900 MPa (at ambient temperature)/175 鳦 and 900 MPa (at ambient temperature)/235 鳦 - Dimensio |
| ISO 8943-1991 |
輕質碳?xì)浠衔镏评湟?液化天然氣取樣.連續法 |
Refrigerated light hydrocarbon fluids; sampling of liquefied natural gas; continuous method |
| ISO 8945-1989 |
土壤耕作設備.旋耕機刀片.固定尺寸 |
Equipment for working the soil; rotary cultivator blades; fixing dimensions |
| ISO 8947-1993 |
農業機械.土壤耕作設備.S型齒:試驗方法 |
Agricultural machinery; equipment for working the soil; S-tines: test method |
| ISO 895-1977 |
表面活性劑.工業用仲烷基硫酸鈉.分析方法 |
Surface active agents; Technical sodium secondary alkylsulphates; Methods of analysis |
| ISO 8954-1-1990 |
鐵合金.詞匯.第1部分:材料 |
Ferroalloys; vocabulary; part 1: materials |
| ISO 8954-2-1990 |
鐵合金.詞匯.第2部分:取樣和樣品的制備 |
Ferroalloys; vocabulary; part 2: sampling and sample preparation |
| ISO 8954-3-1990 |
鐵合金.詞匯.第3部分:篩選 |
Ferroalloys; vocabulary; part 3: sieve analysis |
| ISO 8956-1986 |
組合式或非組合式車床仿形附件的驗收條件.精度試驗 |
Acceptance conditions for copying attachments, integral or otherwise, for lathes; testing of the accuracy |
| ISO 8957-1996 |
信息和文獻工作.目錄信息交換用希伯來字母代碼字符集 |
Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange |
| ISO 8960-1991 |
制冷機.家用和類似用途用冷凍食品儲藏柜和食品冷凍柜.空氣噪聲輻射測量 |
Refrigerators, frozen-food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise |
| ISO 8965-1987 |
采伐工業.生產技術.術語和定義.三種語言版 |
Logging industry; Technology; Terms and definitions Trilingual edition |
| ISO 8966-1987 |
采伐工業.產品.術語和定義.三種語言版 |
Logging industry; Products; Terms and definitions Trilingual edition |
| ISO 8967-1992 |
奶粉和奶粉制品.松密度測定 |
Dried milk and dried milk products; determination of bulk density |
| ISO 8968-1-2001 |
牛奶.氮含量的測定.第1部分:基耶達爾(Kjedahl)法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method |
| ISO 8968-2-2001 |
牛奶.氮含量的測定.第2部分:分段溶解法(宏觀法) |
Milk - Determination of nitrogen content - Part 2: Block-digestion method (Macro method) |
| ISO 8968-3-2004 |
牛奶.氮含量的測定.第3部分:塊溶解法(半微觀快速常規法) |
|
| ISO 8968-4-2001 |
牛奶.氮含量的測定.第4部分:無蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 4: Determination of non-protein-nitrogen content |
| ISO 8968-5-2001 |
牛奶.氮含量的測定.第5部分:蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content |
| ISO 8969-1990 |
木結構.單面孔金屬板緊固件和接頭的試驗方法 |
Timber structures; testing of unilateral punched metal plate fasteners and joints |
| ISO 897-2000 |
攝影.膠卷.126、110和135號膠片.載像面的鑒別 |
Photography - Roll films, 126, 110 and 135-size films - Identification of the image-bearing side |
| ISO 8970-1989 |
木結構.機械緊固件連結接合處的試驗.木材密度要求 |
Timber structures; testing of joints made with mechanical fasteners; requirements for wood density |
| ISO 8973-1997 |
液化石油氣.密度和蒸氣壓力的計算 |
Liquefied petroleum gases - Calculation for density and vapour pressure |
| ISO 8974-2002 |
塑料.酚醛樹脂.用氣體色譜法測定殘余酚的含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography |
| ISO 8975-1989 |
塑料.酚醛樹脂.pH值的測定 |
Plastics; phenolic resins; determination of pH |
| ISO 8976-1988 |
夾扭鉗和剪切鉗.多滑動結合手鉗.尺寸和試驗值 |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values |
| ISO 8976-2004 |
夾扭鉗和剪切鉗.水泵鉗.尺寸和試驗值 |
|
| ISO 8977-2003 |
沖壓工具.沖模 |
Tools for pressing - Matrixes |
| ISO 8977-2003 |
沖壓工具.沖模 |
|
| ISO 8979-1988 |
電子設備用的夾扭鉗和剪切鉗和夾鉗.術語 |
Pliers and nippers for electronics; nomenclature |
| ISO 8979-2004 |
電訊夾扭鉗和剪切鉗.術語 |
|
| ISO 898-1-1999 |
碳鋼和合金鋼制造的緊固件的機械特性,第1部分:螺栓,螺紋和嵌釘 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
| ISO 898-2-1992 |
緊固件的機械性能.第2部分:有規定的檢驗載荷值的螺母.粗牙螺紋 |
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread |
| ISO 898-5-1998 |
碳鋼及合金鋼制緊固件的機械性能.第5部分:不受拉伸應力的定位螺釘和類似的螺紋緊固件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses |
| ISO 898-6-1994 |
緊固件的機械性能.第6部分:有規定標準載荷的螺母:細牙螺紋 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread |
| ISO 898-7-1992 |
緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼?yàn)和最小扭矩 |
Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 8980-1-1996 |
眼科光學.未打磨完成的眼鏡片.第1部分:單光多焦透鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses |
| ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.第1部分:單焦點和多焦點鏡片規范 |
|
| ISO 8980-2-1996 |
眼科光學.未打磨完成的眼鏡片.第2部分:漸變眼鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses |
| ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.第2部分:漸變焦眼鏡片規范 |
|
| ISO 8980-3-1999 |
眼科光學.未切割的成品透鏡片.第3部分:透光性能和試驗方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods |
| ISO 8980-3-2003 |
眼科光學.未切邊成品眼鏡片.第3部分:透光性規范和試驗方法 |
(Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods) |
| ISO 8980-3-2003 |
眼科光學.未切邊成品眼鏡片.第3部分:透光性規范和試驗方法 |
|
| ISO 8980-4-2000 |
眼科光學.未切的成品眼鏡鏡片.第4部分:防反射涂層的試驗方法和規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings |
| ISO 8981-1993 |
小麥.用電泳法鑒別小麥的種類 |
Wheat; identification of varieties by electrophoresis |
| ISO 8984-1-1993 |
柴油發動機.燃料噴射器的試驗.第1部分:手柄操作檢驗儀和調整儀 |
Diesel engines; testing of fuel injectors; part 1: hand-lever-operated testing and setting apparatus |
| ISO 8984-2-1993 |
柴油發動機.燃料噴射器的試驗.第2部分:試驗方法 |
Diesel engines; testing of fuel injectors; part 2: test methods |
| ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸鹽共聚物(ENAC)熱塑性.乙烯基乙酸鹽含量的測定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content |
| ISO 8986-1-1993 |
塑料.聚丁烯模制品和擠塑用料.第1部分:命名系統和基本規范 |
Plastics; polybutene (PB) moulding and extrusion materials; part 1: designation system and basis for specifications |
| ISO 8986-2 AMD 1-2000 |
塑料.聚丁烯(PB)模制品和擠塑用料.第2部分:試樣的制備和特性的測定.修改件1 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1 |
| ISO 8987-1995 |
塑料.酚醛樹脂.在B轉變?cè)囼?yàn)板上的活化性能的測定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate |
| ISO 8988-1995 |
塑料.酚醛樹脂.六亞甲基四胺含量的測定 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method |
| ISO 8989-1995 |
塑料.液態酚醛樹脂.水的可混性的測定 |
Plastics - Liquid phenolic resins - Determination of water miscibility |
| ISO 899-1-1993 |
塑料.蠕變的測定.第2部分:拉申蠕變 |
Plastics; determination of creep behaviour; part 1: tensile creep |
| ISO 899-1-2003 |
塑料.蠕變性能的測定.第1部分:拉伸蠕變 |
(Plastics - Determination of creep behaviour - Part 1: Tensile creep) |
| ISO 899-1-2003 |
塑料.蠕變性能的測定.第1部分:拉伸蠕變 |
|
| ISO 899-2-1993 |
塑料.蠕變的測定.第2部分:用抗彎負載法測定擾屈蠕變 |
Plastics; determination of creep behaviour; part 2: flexural creep by three-point-loading |
| ISO 899-2-2003 |
塑料.蠕變性能的測定.第2部分:用三點負載測定撓曲蠕變 |
(Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading) |
| ISO 899-2-2003 |
塑料.蠕變性能的測定.第2部分:用三點負載測定撓曲蠕變 |
|
| ISO 8990-1994 |
熱絕緣.穩定狀態熱傳輸特性的測定.校正及屏蔽的隔熱箱 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box |
| ISO 8991-1986 |
緊固件的標記體系 |
Designation system for fasteners |
| ISO 8992-1986 |
緊固件.螺栓,螺釘,螺柱和螺母的一般要求 |
Fasteners; General requirements for bolts, screws, studs and nuts |
| ISO 8993-1989 |
陽極化鋁和鋁合金.點腐蝕法評定鋁及合金陽極氧化層.圖表法 |
Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; chart method |
| ISO 8994-1989 |
陽極化鋁和鋁合金.點腐蝕法評定鋁及合金陽極氧化層.網格法 |
Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; grid method |
| ISO 8995-2002 |
室內工作場所的照明 |
Lighting of indoor work places |
| ISO 8996-1990 |
人類工效學.代謝熱量的測定 |
Ergonomics; determination of metabolic heat production |
| ISO 8996-2004 |
熱環境的人類工效學.代謝率的測定 |
|
| ISO 8999-2001 |
往復式內燃機.圖形符號 |
Recipricating internal combustion engines - Graphical symbols |
| ISO 9-1995 |
信息和文獻.從斯拉夫語西里爾字母到拉丁字母的譯音.斯拉夫語和非斯拉夫語 |
(Information and documentation - Transliteration of Cyrillic characters into Latin characters - Slavic and non-Slavic languages) |
| ISO 90-1-1997 |
薄金屬容器.定義和尺寸、容量的測定.第1部分:頂開口罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans |
| ISO 90-2-1997 |
薄金屬容器.定義和尺寸、容量的測定.第2部分:普通集裝箱 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers |
| ISO 90-3-2000 |
輕型金屬容器.定義和尺寸、容量的測定.第3部分:氣溶膠罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3 : Aerosol cans |
| ISO 900-1977 |
金屬鋁生產用氧化鋁.鈦含量的測定.二安替比林基代甲烷光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of titanium content; Diantipyrylmethane photometric method |
| ISO 9000-2000 |
質量管理體系.基礎及詞匯 |
Quality management systems - Fundamentals and vocabulary |
| ISO 9000-3-1997 |
質量管理和質量保證標準.第3部分:ISO 9001-94計算機軟件的開發,供給,安裝和維護應用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
| ISO 9000-4-1993 |
質量管理和質量認證標準.第4部分:可靠性程序管理指南 |
Quality management and quality assurance standards; part 4: guide to dependability programme management |
| ISO 9001-2001 |
ISO 9001-2000理解指南光盤 |
ISO 9001:2000 Insight Guidance CD |
| ISO 9004-2000 |
質量管理體系.業績改進指南 |
Quality managment systems - Guidelines for performance improvements |
| ISO 9005-1994 |
二氧化鈾粉末和二氧化鈾燒結丸.氧和鈾的原子系數的測定.電流測量法 |
Uranium dioxide powder and sintered pellets - Determination of oxygen/uranium atomic ratio - Amperometric method |
| ISO 9006-1994 |
鈾和二氧化鈾粉末和丸狀二氧化鈾.氮含量測定.敏感電極使用方法 |
Uranium metal and uranium dioxide powder and pellets - Determination of nitrogen content - Method using ammonia-sensing electrode |
| ISO 9007-1987 |
信息處理系統.概念模式和信息基數的概念和術語 |
Information processing systems; Concepts and terminology for the conceptual schema and the information base |
| ISO 9008-1991 |
玻璃瓶.垂直度.試驗方法 |
Glass bottles; verticality; test method |
| ISO 9009-1991 |
玻璃容器.以容器底作基準的瓶口高度和不平行性.試驗方法 |
Glass containers; heigth and non-parallelism of finish with reference to container base; test methods |
| ISO 901-1976 |
金屬鋁生產用氧化鋁.絕對密度的測定.比重計法 |
Aluminium oxide primarily used for the production of aluminium; Determination of absolute density; Pyknometer method |
| ISO 9010-1997 |
同步皮帶驅動.汽車用皮帶 |
Synchronous belt drives - Automotive belts |
| ISO 9011-1997 |
同步皮帶驅動.汽車皮帶輪 |
Synchronous belt drives - Automotive pulleys |
| ISO 9012-1998 |
氣焊設備.吸氣式手持噴焊槍.規范和試驗 |
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests |
| ISO 9013-2002 |
熱切割.熱切割分類.產品幾何量技術規范和質量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances |
| ISO 9015-1-2001 |
金屬材料焊接的破壞試驗.硬度試驗.第1部分:電弧焊接頭硬度試驗 |
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| ISO 9015-2-2003 |
金屬材料焊接的破壞性試驗.硬度試驗.第2部分:焊接件的顯微硬度試驗 |
(Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints) |
| ISO 9015-2-2003 |
金屬材料焊接的破壞性試驗.硬度試驗.第2部分:焊接件的顯微硬度試驗 |
|
| ISO 9016-2001 |
金屬材料焊接的破壞試驗.沖擊試驗.試樣定位、切口定向和檢查 |
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| ISO 9017-2001 |
金屬材料焊接中的破壞試驗.裂縫試驗 |
Destructive tests on welds in metallic materials - Fracture test |
| ISO 9018-2003 |
金屬材料焊接的破壞性試驗.十字形接縫和搭接縫的抗拉試驗 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com