標準號 |
中文名稱 |
英文名稱 |
| BS ISO 15671-2000 |
橡膠和橡膠添加劑.使用自動分析儀測定總硫含量 |
Rubber and rubber additives - Determination of total sulfur content using an automatic analyser |
| BS ISO 15672-2000 |
橡膠和橡膠添加劑.使用自動分析儀測定總氮含量 |
Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser |
| BS ISO 15674-2001 |
心臟脈管植入物和人工器官.硬殼式心臟/靜脈存儲系統(有/無過濾器)和軟靜脈儲血袋 |
Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| BS ISO 15675-2001 |
心臟脈管和人工器官.心脈旁通系統.動脈血過濾器 |
Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters |
| BS ISO 15681-1-2004 |
水質.用流量分析法(FIA and CFA)測定正磷酸鹽和磷總含量.流量注入分析法(FIA) |
|
| BS ISO 15681-2-2004 |
水質.用流量分析法(FIA and CFA)測定正磷酸鹽和磷總含量.連續流量分析法(CFA) |
|
| BS ISO 15682-2000 |
水質.流量分析(CFA和FIA)和光度測量或電位檢測法測定氯化物 |
Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
| BS ISO 15686-1-2000 |
建筑物和施工資產.使用壽命計劃.一般原理 |
Buildings and constructed assets - Service life planning - General principles |
| BS ISO 15686-2-2001 |
建筑物和施工資產.使用壽命計劃.使用壽命預測程序 |
Buildings and constructed assets - Service life planning - Service life prediction procedures |
| BS ISO 15686-3-2002 |
建筑物和施工資產.使用壽命計劃.性能審核和評論 |
Buildings and constructed assets - Service life planning - Performance audits and reviews |
| BS ISO 15686-6-2004 |
建筑物和施工資產.使用壽命計劃.考慮環境效應的規程 |
|
| BS ISO 15705-2002 |
水質.化學需氧量的測定(ST-COD).小型密封管法 |
Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method |
| BS ISO 15706-2002 |
信息和文獻工作.國際標準視聽數碼(ISAN) |
Information and documentation - International Standard Audiovisual Number (ISAN) |
| BS ISO 15707-2001 |
信息和文獻工作.國際標準音樂管理代碼(ISWC) |
Information and documentation - International standard musical work code (ISWC) |
| BS ISO 15710-2002 |
涂料和清漆.浸漬在緩沖氯化鈉溶液中和在該溶液中去除的腐蝕試驗試 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| BS ISO 15715-2003 |
色漆和清漆用粘合劑.混濁度的測定 |
(Binders for paints and varnishes - Determination of turbidity) |
| BS ISO 15724-2001 |
金屬和其它無機覆層.鋼中可擴散氫的電化學測量.Barnacle電極法 |
Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method |
| BS ISO 15730-2001 |
金屬和其他無機涂層.用電拋光精加工和鈍化不銹鋼 |
Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| BS ISO 15734-2003 |
船舶和海上技術.靜水壓力釋放裝置 |
(Ships and marine technology - Hydrostatic release units) |
| BS ISO 15738-2002 |
船舶與海上技術.充氣救生裝置用充氣系統 |
Ships and marine technology - Gas inflation systems for inflatable life-saving appliances |
| BS ISO 15739-2003 |
攝影.電子靜物攝影成像.噪音測量 |
(Photography - Electronic still-picture imaging - Noise measurements) |
| BS ISO 15741-2002 |
涂料和清漆.水上和水下無腐蝕氣體管道內側的減小摩擦涂層 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 15750-1-2002 |
包裝.鋼筒.最小總容量為 208 升、 210 升和216.5 升的敞口柱筒(蓋可拆下) |
(Packaging - Steel drums - Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l) |
| BS ISO 15750-2-2002 |
包裝.鋼筒.最小總容量為 212升、216,5 升和 230 升的密封蓋圓筒 |
(Packaging - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l) |
| BS ISO 15752-2001 |
眼科儀器.眼內照明裝置.光輻射安全的基本要求和試驗方法 |
Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety |
| BS ISO 15767-2003 |
工作場所大氣.對采集的氣溶膠稱重時產生的控制和特征誤差 |
(Workplace atmospheres - Controlling and characterizing errors in weighing collected aerosols) |
| BS ISO 15790-2005 |
圖形技術和攝影.反射和傳輸計量學用認證的標準物質.包括組合標準不確定度測定在內的使用文檔和規程 |
|
| BS ISO 15791-1-2003 |
塑料.塑料產品用中等規模燃燒試驗的設計和應用.通用指南 |
(Plastics - Development and use of intermediate-scale fire tests for plastics products - General guidance) |
| BS ISO 15794-2001 |
雙向和多向叉車卡車.穩定性試驗 |
Bi-directional and multi-directional fork-lift trucks - Stability tests |
| BS ISO 15796-2005 |
氣體分析.分析偏差的調查和處理 |
|
| BS ISO 15797-2002 |
紡織品.工作服檢測用工業洗滌和整理規程 |
Textiles - Industrial washing and finishing procedures for testing of workwear |
| BS ISO 15799-2003 |
土壤質量.土壤和土壤物質的生態毒性表征指南 |
(Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials) |
| BS ISO 15825-2004 |
橡膠配合材料.炭黑.用盤式離心沉淀攝影法測定集料粒度分布 |
|
| BS ISO 15828-2004 |
道路車輛.車前斜撞試驗規程 |
|
| BS ISO 15836-2003 |
信息和文獻工作.都柏林核心數據素集 |
(Information and documentation - The Dublin Core metadata element set) |
| BS ISO 15838-2004 |
船舶與海上技術.管道設施中使用的帶密封襯墊的機械耦合配件.性能規范 |
|
| BS ISO 15838-2004 |
船舶與海上技術.管道設施中使用的有墊圈機械連接配件.性能規范 |
|
| BS ISO 15839-2004 |
水質.水用聯機傳感器/分析設備.規范和性能試驗 |
|
| BS ISO 15839-2004 |
水質.水用聯機傳感器/分析設備.規范和性能試驗 |
|
| BS ISO 15849-2001 |
船舶和航海技術.船隊管理系統網絡的實施導則 |
Ships and marine technology - Guidelines for implementation of a fleet management system network |
| BS ISO 15850-2002 |
塑料.測定拉伸-拉伸疲勞斷裂延伸度.線性彈力斷裂機械(LEFM)試驗方法 |
Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 15859-1-2004 |
航天系統.液體性能.抽樣和試驗方法.氧 |
|
| BS ISO 15859-10-2004 |
航天系統.液體性能.抽樣和試驗方法.水 |
|
| BS ISO 15859-11-2004 |
航天系統.液體性能.抽樣和試驗方法.氨 |
|
| BS ISO 15859-12-2004 |
航天系統.液體性能.抽樣和試驗方法.二氧化碳 |
|
| BS ISO 15859-13-2004 |
航天系統.液體性能.抽樣和試驗方法.呼吸氣體 |
|
| BS ISO 15859-2-2004 |
航天系統.液體性能.抽樣和試驗方法.氫 |
|
| BS ISO 15859-3-2004 |
航天系統.液體性能.抽樣和試驗方法.氮 |
|
| BS ISO 15859-4-2004 |
航天系統.液體性能.抽樣和試驗方法.氦 |
|
| BS ISO 15859-5-2004 |
航天系統.液體性能.抽樣和試驗方法.四氧化氮推進劑 |
|
| BS ISO 15859-6-2004 |
航天系統.液體性能.抽樣和試驗方法.一甲基肼推進劑 |
|
| BS ISO 15859-7-2004 |
航天系統.液體性能.抽樣和試驗方法.肼推進劑 |
|
| BS ISO 15859-8-2004 |
航天系統.液體性能.抽樣和試驗方法.煤油推進劑 |
|
| BS ISO 15859-9-2004 |
航天系統.液體性能.抽樣和試驗方法.氬 |
|
| BS ISO 15864-2004 |
航天系統.航空器、子系統和部件的一般試驗方法 |
|
| BS ISO 15870-2001 |
機動工業貨車.安全標志和危險圖示.一般原則 |
Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| BS ISO 15871-2001 |
工業用貨車.集裝箱搬運和抓鉤臂操作用指示燈規范 |
Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| BS ISO 15872-2002 |
航空航天.UNJ螺紋.測量 |
Aerospace - UNJ threads - Gauging |
| BS ISO 15884-2003 |
乳脂.脂肪酸甲酯制備 |
Milk fat - Preparation of fatty acid methyl esters |
| BS ISO 15885-2004 |
乳脂.用氣-液相色譜分析法測定脂肪酸組分 |
|
| BS ISO 15885-2004 |
乳脂.用氣-液相色譜分析法測定脂肪酸組分 |
|
| BS ISO 15886-1-2004 |
農用灌溉設備.噴頭.術語和分類的定義 |
|
| BS ISO 15886-3-2004 |
農用灌溉設備.噴頭.分布的表征和試驗方法 |
|
| BS ISO 15889-2003 |
航天數據和信息傳送系統.數據描述語言.EAST規范 |
(Space data and information transfer systems - Data description language - EAST specification) |
| BS ISO 15902-2004 |
光學和光子學.衍射光學.詞匯 |
|
| BS ISO 15903-2002 |
土壤質量.土壤和現場信息記錄格式 |
Soil quality - Format for recording soil and site information |
| BS ISO 15911-2001 |
石油及其制品的試驗方法.用氫含量數據估計航空燃氣渦輪發動機用燃料的凈單位能量 |
Methods of test for petroleum and its products - Estimation of net specific energy of aviation turbine fuels using hydrogen content data |
| BS ISO 15914-2004 |
動物飼料.總淀粉含量中酶的測定 |
|
| BS ISO 15929-2002 |
制圖技術.預壓縮數字數據交換.PDF/X標準研制導則與原則 |
Graphic technology - Prepress digital data exchange - Guidelines and principles for the development of PDF/X standards |
| BS ISO 15930-1-2002 |
印刷技術.印前數字數據交換.PDF格式的使用.使用CMYK 數據 (PDF/X-1) 和( PDF/X-1a)的完全交換 |
Graphic technology - Prepress digital data exchange - Use of PDF - Complete exchange using CMYK data (PDF/X-1) and PDF/X-1a) |
| BS ISO 15987-2003 |
塑料.薄膜和片材.雙軸向取向聚酰胺(尼龍)薄膜 |
(Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films) |
| BS ISO 15988-2003 |
塑料.薄膜和片材.雙軸向取向聚對苯二甲酸乙二酯(PET)薄膜 |
(Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films) |
| BS ISO 16000-1-2005 |
室內空氣.抽樣方法的一般情況 |
|
| BS ISO 16000-2-2005 |
室內空氣.甲醛的抽樣方法 |
|
| BS ISO 16000-3-2001 |
室內空氣.甲醛和其它碳基化合物的測定.主動抽樣法 |
Indoor air - Determination of formaldehyde and other carbonyl compounds - Active sampling method |
| BS ISO 16000-4-2005 |
室內空氣.甲醛的測定.擴散抽樣法 |
|
| BS ISO 16002-2004 |
儲存的谷物顆粒和豆子.用捕集法檢測活體無脊椎動物侵害谷物顆粒和豆子用指南 |
|
| BS ISO 16014-1-2003 |
塑料.用粒度排除色譜法測定聚合物中平均分子質量和分子質量的分布.一般原則 |
(Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - General principles) |
| BS ISO 16014-2-2003 |
塑料.用粒度排除色譜法測定聚合物中平均分子質量和分子質量的分布.通用校準法 |
(Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Universal calibration method) |
| BS ISO 16014-3-2003 |
塑料.用粒度排除色譜法測定聚合物中平均分子質量和分子質量的分布.低溫法 |
(Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Low-temperature method) |
| BS ISO 16014-4-2003 |
塑料.用粒度排除色譜法測定平均分子質量和分子質量分布.高溫法 |
(Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - High-temperature method) |
| BS ISO 16016-2001 |
技術產品文獻.限制文獻和產品使用的保護通告 |
Technical product documentation - Protection notices for restricting the use of documents and products |
| BS ISO 16028-2000 |
液壓傳動.在20MPa(200巴)到31.5MPa(315巴)的壓力下使用平面型速動聯軸器.規范 |
Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
| BS ISO 16030-2002 |
氣壓液動.連接.氣口和螺紋端頭 |
Pneumatic fluid power - Connections - Ports and stud ends |
| BS ISO 16035-2003 |
動物和植物油脂.食用油中低沸點鹵代烴的測定 |
(Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils) |
| BS ISO 16049-1-2001 |
空運貨物設備.約束帶條.設計標準和試驗方法 |
Air cargo equipment - Restraint straps - Design criteria and testing methods |
| BS ISO 16054-2001 |
外科植入物.外科植入物的最小數據集 |
Implants for surgery - Minimum data sets for surgical implants |
| BS ISO 16057-2002 |
涂敷磨料.剛化纖維盤 |
Coated abrasives - Vulcanized fibre discs |
| BS ISO 16063-1-1999 |
振動和沖擊傳感器的校正方法.第1部分:基本概念 |
Methods for the calibration of vibration and shock transducers - Basic concepts |
| BS ISO 16063-11-2001 |
振動和沖擊傳感器的校正方法.使用激光干涉量度法的主要振動校正 |
Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry |
| BS ISO 16063-12-2002 |
校準沖擊振動傳感器的方法.由往復式方法進行初級振動校準 |
Methods for the calibration of vibration and shock transducers - Primary vibration calibration by the reciprocity method |
| BS ISO 16063-13-2002 |
振動和沖擊傳感器的校正方法.用激光干涉量度法進行初次沖擊校正 |
Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry |
| BS ISO 16063-21-2003 |
振動和沖擊傳感器的校準方法.與基準傳感器比對進行振動校準 |
(Methods for the calibration of vibration and shock transducers - Vibration calibration by comparison to a reference transducer) |
| BS ISO 16063-22-2005 |
振動和沖擊傳感器的校準方法.與基準傳感器進行比對的沖擊校準 |
|
| BS ISO 16065-1-2001 |
紙漿.自動光學分析法測定纖維長度.極化光法 |
Pulps - Determination of fibre length by automated optical analysis - Polarized light method |
| BS ISO 16067-1-2004 |
攝影.攝影圖像用電子掃描儀.空間分辨率測量.反射介質用掃描儀 |
|
| BS ISO 16067-2-2004 |
攝影.攝影圖像用電子掃描儀.空間分辨率測量.膠片掃描儀 |
|
| BS ISO 16069-2004 |
圖形符號.安全標志.安全路徑指示系統(SWGS) |
|
| BS ISO 16072-2003 |
土壤質量.微生物土壤呼吸性測定的實驗室方法 |
Soil quality - Laboratory methods for determination of microbial soil respiration |
| BS ISO 16107-1999 |
工作場所空氣.擴散取樣器的性能評估協議 |
Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers |
| BS ISO 16121-4-2005 |
道路車輛.專用線公共汽車駕駛員工作地點的人類功效學要求.駕駛室要求 |
|
| BS ISO 16124-2004 |
鋼絲繩.尺寸和公差 |
|
| BS ISO 16132-2004 |
球墨鑄鐵管和配件.水泥灰漿襯套的密封涂層 |
|
| BS ISO 16156-2004 |
機床安全.工件夾盤的設計和建造的安全要求 |
|
| BS ISO 16160-2005 |
連續熱軋鋼薄板產品.尺寸和形狀公差 |
|
| BS ISO 16162-2005 |
連續冷軋鋼薄板產品.尺寸和形狀公差 |
|
| BS ISO 16163-2005 |
連續熱浸涂敷鋼薄板產品.尺寸和形狀公差 |
|
| BS ISO 16163-2005 |
連續熱浸涂敷鋼薄板產品.尺寸和形狀公差 |
|
| BS ISO 16165-2001 |
船只和海上技術.海洋環境保護.與漏油反應有關術語 |
Ships and marine technology - Marine environment protection - Terminology relating to oil spill response |
| BS ISO 16183-2003 |
重型機車.未處理排氣的氣體排放測量和瞬變試驗條件下用部分流體稀釋系統測量粒子排放 |
(Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions) |
| BS ISO 16200-1-2004 |
工作場所空氣質量.用溶劑解吸/氣相色譜法對揮發性有機化合物取樣和分析.抽吸取樣法 |
|
| BS ISO 16200-1-2004 |
工作場所空氣質量.用溶劑解吸/氣相色譜法對揮發性有機化合物取樣和分析.抽吸取樣法 |
|
| BS ISO 16200-2-2004 |
工作場所空氣質量.用溶劑解吸/氣相色譜法對揮發性有機物取樣和分析.擴散取樣法 |
|
| BS ISO 16200-2-2004 |
工作場所空氣質量.用溶劑解吸/氣相色譜法對揮發性有機物取樣和分析.擴散取樣法 |
|
| BS ISO 1622-1-1995 |
塑料.聚苯乙烯(PS)模塑和擠塑材料.命名體系和基礎規范 |
Plastics. Polystrene (PS) moulding and extrusion materials. Designation system and basis for specifications |
| BS ISO 16221-2001 |
水質.海洋環境中生物降解性的測定指南 |
Water Quality - Guidance for determination of biodegradability in the marine environment |
| BS ISO 16241-2005 |
管和管件用聚乙烯材料耐慢速裂紋伸展的測定的缺口拉伸試驗(PENT) |
|
| BS ISO 1625-1998 |
塑料.高聚物分散作用.在規定溫度下非揮發物(殘留物質)的測定 |
Plastics - Polymer dispersions - Determination of non-volatile matter (residue) at specified temperatures |
| BS ISO 16264-2002 |
水質.用流量分析法(FIA 和 CFA)和光度計檢測法測定可溶性硅酸鹽 |
Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
| BS ISO 16269-8-2004 |
數據的統計說明.預測差異的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com