標準號 |
中文名稱 |
英文名稱 |
| EN ISO 11670-2003 |
激光和激光設備激光束參數的試驗方法束定位穩定性 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003) |
| EN ISO 11674-2001 |
船舶與海上技術航向控制系統 |
Ships and marine technology - Heading control systems (ISO 11674:2000) |
| EN ISO 11680-1-2000 |
林業機械動力桿式修枝鋸的安全要求和試驗第1部分：側掛式桿式修枝鋸 |
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) |
| EN ISO 11680-2-2000 |
林業機械動力桿式修枝鋸的安全要求和試驗第2部分：攜背負式桿式修枝鋸 |
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) |
| EN ISO 11681-1-2004 |
林業機械.便攜式鏈鋸的安全要求和試驗.第1部分:林業專用鏈鋸 |
|
| EN ISO 11681-2-1998 |
林業機械便攜式鏈鋸的安全要求和試驗第2部分：修枝鋸 |
Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998) |
| EN ISO 11681-2/prA1-2003 |
林業機械便攜式鏈鋸的安全要求和試驗第2部分：修枝鋸修改A1 |
Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment A1 (ISO 11681-2:1998/FDAM 1:2003) / Note: Intended as an amendment to EN ISO 11681-2 (1998-04). |
| EN ISO 11683-1997 |
包裝觸摸危險標志要求 |
Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997) |
| EN ISO 11688-2-2000 |
聲學低噪聲機器和設備設計的推薦實用規程第2部分：低噪聲設計的物理工程說明 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 11689-1996 |
聲學機器和設備發射噪聲數據的比較方法 |
Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996) |
| EN ISO 11690-1-1996 |
聲學低噪聲機器工作間設計的推薦實用規程第1部分：噪聲控制策略 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| EN ISO 11690-2-1996 |
聲學低噪聲機器工作間設計的推薦實用規程第2部分：噪聲控制措施 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
| EN ISO 11690-3-1998 |
聲學低噪聲機器工作間設計的推薦實用規程第3部分：工作室中的聲傳播和噪聲預測 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997) |
| EN ISO 11691-1995 |
聲學無氣流管道消聲器插入損失的測量實驗室測量法 |
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| EN ISO 11715-1-1998 |
眼科光學眼鏡鏡片剖面數據傳送用數字?jǐn)?shù)據文件的格式第1部分：二維描繪工具 |
Ophthalmic optics - Format of digital data files for data transfer for profiling of spectacle lenses - Part 1: Two-dimensional tracers (ISO 11715-1:1998) |
| EN ISO 1172-1998 |
紡織玻璃纖維增強塑料、預浸料、模塑料和層壓塑料紡織玻璃纖維和礦物質填料含量的測定 煅燒法 |
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| EN ISO 11721-1-2001 |
紡織品纖維素紡織品抗菌性的測定弄臟法第1部分：防腐處理的評定 |
Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001) |
| EN ISO 11721-2-2003 |
紡織品紡織品中纖維素抗細菌生長力的測定弄臟法第2部分：長期保持干凈阻力的識別 |
Textiles - Determination of resistance of cellulose containing textiles to microorganisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003) |
| EN ISO 11732-1997 |
水質氨氮的測定流動分析(CFA和FIA)和光譜測定法 |
Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:1997) |
| EN ISO 11733-1998 |
水質水中有機化合物的生物降解和去除率的評估方法活性污泥模擬試驗 |
Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:1995) |
| EN ISO 11733-2004 |
水質.水介質中有機化合物的生物降解和去除率的測定.活性污泥模擬試驗 |
|
| EN ISO 11734-1998 |
水質消化污泥中有機化合物最終厭氧生物降解能力評估方法測量沼氣產生量的方法 |
Water quality - Evaluation of the ultimate anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995) |
| EN ISO 11737-2-2000 |
醫療器械滅菌微生物學方法第2部分：確認滅菌過程中進行的無菌試驗 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998) |
| EN ISO 11806-1997 |
農林機械由內燃機驅動的便攜手持式割灌機和割草機安全 |
Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) |
| EN ISO 1181-2004 |
纖維繩索.馬尼拉麻和西沙爾麻繩索.3、4和8股繩 |
|
| EN ISO 11810-2002 |
光學及光學儀器激光及激光設備外科布簾和/或病人防護衣抗激光照射性的試驗方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002) |
| EN ISO 11812-2001 |
小艇密水艙和快速排水艙 |
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| EN ISO 11816-1-2000 |
乳和乳制品用熒光測定法測定堿性磷酸酶的活性第1部分：乳和乳制飲料 |
Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks (ISO 11816-1:1997) |
| EN ISO 11816-2-2003 |
乳和乳制品堿性磷酸酶的活性的測定第2部分：干酪的熒光測定方法 |
Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (ISO 11816-2:2003) |
| EN ISO 11819-1-2001 |
聲學路面對交通噪聲影響的測量第1部分：統計旁路法 |
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997) |
| EN ISO 1182-2002 |
建筑材料著火試驗 反應不燃性試驗 |
Reaction to fire tests for building products - Non-combustibility test (ISO 1182:2002) |
| EN ISO 11820-1996 |
聲學消聲器的現場測量 |
Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| EN ISO 11821-1997 |
聲學可移動聲屏障聲衰減的現場測量 |
Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
| EN ISO 1183-1-2004 |
塑料.非泡沫塑料的密度測定方法.第1部分:浸入法、液體比重瓶法和滴定法 |
|
| EN ISO 1183-2-2004 |
塑料.非泡沫塑料的密度測定方法.第2部分:密度梯度柱法 |
|
| EN ISO 1183-3-1999 |
塑料非泡沫塑料的密度測定方法第3部分：氣體比重瓶法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999) |
| EN ISO 11857-2002 |
鋪地織物抗分層性的測定 |
Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999) |
| EN ISO 11885-1997 |
水質電感耦合等離子體原子發射光譜法測定33種素 |
Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) |
| EN ISO 11890-1-2001 |
色漆和清漆揮發性有機化合物(VOC)的測定第1部分：各種方法 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2000) |
| EN ISO 11890-2-2001 |
色漆和清漆揮發性有機化合物(VOC)的測定第2部分：氣相色譜法 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2000) |
| EN ISO 11897-2001 |
包裝熱塑柔性薄膜袋折邊處的撕裂擴展試驗 |
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999) |
| EN ISO 119-1998 |
塑料酚－醛模塑件游離酚的測定碘量法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method (ISO 119:1977) |
| EN ISO 11904-1-2002 |
聲學耳朵接收到的來自封閉噪聲源的噪聲量的測定第1部分：真耳中使用拾音器的技術(MIRE技術) |
Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 1: Technique using a microphone in real ear (MIRE-technique) (ISO 11904-1:2002) |
| EN ISO 11904-2-2004 |
聲學.從接近耳朵的聲源處測定聲排放強度.第2部分:利用人體模型技術 |
|
| EN ISO 11905-1-1998 |
水質氮的測定第1部分：過硫酸鹽氧化消解法 |
Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxosulfate (ISO 11905-1:1997) |
| EN ISO 11908-1998 |
色漆和清漆用粘合劑胺基樹脂一般試驗法 |
Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) |
| EN ISO 11909-1998 |
色漆和清漆用粘合劑聚異氰酸酯樹脂一般試驗法 |
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:1996) |
| EN ISO 11925-2-2002 |
對火反應試驗直接受火的建筑制品的可燃性第2部分：單一火源試驗 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2002) |
| EN ISO 11957-1996 |
聲學客艙隔聲性能的測定實驗室測量和現場測量 |
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN ISO 11960-2004 |
石油和天然氣工業.油井套管或油管用鋼管 |
|
| EN ISO 11961-1996 |
石油和天然氣工業鉆井桿用鋼管規范 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996) |
| EN ISO 11963-1995 |
塑料聚碳酸酯板材類型、尺寸和特性 |
Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:1995) |
| EN ISO 11969-1996 |
水質砷的測定原子吸收光譜法(氫化物技術) |
Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
| EN ISO 11978-2000 |
眼科光學隱形眼鏡和隱形眼鏡保護產品制造商提供的信息 |
Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000) |
| EN ISO 11979-1-1999 |
眼科植入物眼內透鏡第1部分：詞匯 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999) |
| EN ISO 11979-2-1999 |
眼科植入物眼內透鏡第2部分：光學特性和測試方法 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999) |
| EN ISO 11979-4-2000 |
眼科植入物眼內透鏡第4部分：標簽和信息 |
Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000) |
| EN ISO 11980-1997 |
眼科光學隱形眼鏡和隱形眼鏡保護產品臨床檢測指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997) |
| EN ISO 11981-1999 |
眼科光學隱形眼鏡和隱形眼鏡保護產品隱形眼鏡與隱形眼鏡保護產品物理兼容性的測定 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:1999) |
| EN ISO 11984-1999 |
眼科光學隱形眼鏡剛性鏡彎曲和斷裂強度的測定 |
Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999) |
| EN ISO 11985-1997 |
眼科光學隱形眼鏡紫外線輻射的老化試驗(試管法) |
Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997) |
| EN ISO 11986-2000 |
眼科光學隱形眼鏡和隱形眼鏡保護產品保護液吸收和釋放測定指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999) |
| EN ISO 11987-1997 |
眼科光學隱形眼鏡儲存壽命的測定 |
Ophthalmic Optics - Contact lenses - Determination of shell-life (ISO 11987:1997) |
| EN ISO 11990-2003 |
光學和光學儀器激光和激光設備導管激光抗性的測定 |
Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003) |
| EN ISO 11998-2001 |
色漆和清漆涂層的耐濕式洗滌和清洗性測定 |
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998) |
| EN ISO 120-1998 |
塑料酚－醛模塑件游離氨和銨化合物的測定比色法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977) |
| EN ISO 12005-2003 |
激光和激光設備激光束參數的試驗方法偏振 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) |
| EN ISO 12017-1996 |
塑料聚甲基丙烯酸甲酯雙合板和三合板試驗方法 |
Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995) |
| EN ISO 12020-2000 |
水質鋁的測定原子吸收光譜法 |
Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997) |
| EN ISO 12048-2000 |
包裝滿裝的運輸包裝使用壓力試驗機的壓力試驗和堆積試驗 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994) |
| EN ISO 12058-1-2002 |
塑料用落球粘度計測定粘度 第1部分：傾斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) |
| EN ISO 1207-1994 |
開槽圓柱螺釘產品等級A級 |
Slotted cheese head screws - Product grade A (ISO 1207:1992) |
| EN ISO 12085-1997 |
產品幾何量技術規范(GPS)表面結構：輪廓法圖形參數 |
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
| EN ISO 12086-1-1999 |
塑料含氟聚合物分散體模塑和擠塑材料第1部分：命名系統和基本規范 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:1995) |
| EN ISO 12086-2-1999 |
塑料含氟聚合物分散體模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995) |
| EN ISO 1211-2001 |
牛乳脂肪含量的測定重量分析法(參照法) |
Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:1999) |
| EN ISO 12114-1997 |
纖維增強塑料熱固性模壓塑料和預浸料固化特性的測定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997) |
| EN ISO 12115-1997 |
纖維增強塑料熱固性模壓塑料和預浸料流動性、熟化期和適用期的測定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997) |
| EN ISO 12138-1996 |
紡織品織物燃燒試驗前的家庭洗滌方法 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996) |
| EN ISO 12156-1-2000 |
柴油使用高頻往復裝置(HFRR)進行潤滑油評定第1部分：試驗方法(包括技術勘誤) |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997, including Technical Corrigendum 1:1998) |
| EN ISO 12162-1995 |
壓力用熱塑性塑料管材和管件分級和命名總體使用(設計)系數 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995) |
| EN ISO 12163-2000 |
牙科基托/模型蠟 |
Dental baseplate/modelling wax (ISO 12163:1999) |
| EN ISO 12179-2000 |
產品幾何量技術規范(GPS)表面結構：輪廓法接觸(觸針)式儀器的校準 |
Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments (ISO 12179:2000) |
| EN ISO 12185-1996 |
原油和石油產品密度的測定振動的U形管法 |
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN ISO 12193-1999 |
動植物油脂鉛含量的測定石墨爐原子吸收法 |
Animal and vegetable fats and oils - Determination of lead content - Graphite furnace atomic absorption method (ISO 12193:1994) |
| EN ISO 12193-2004 |
動植物油脂.用直接石墨爐原子吸收光譜法測定鉛含量 |
|
| EN ISO 12205-1996 |
石油產品中間餾分燃料的氧化安定性的測定 |
Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| EN ISO 12209-1-2000 |
氣瓶壓縮可呼吸空氣用氣瓶閥的放氣連接器第1部分：軛型連接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000) |
| EN ISO 12209-2-2000 |
氣瓶壓縮可呼吸空氣用氣瓶閥的放氣連接器第2部分：螺紋式連接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000) |
| EN ISO 12209-3-2000 |
氣瓶壓縮可呼吸空氣用氣瓶閥的放氣連接器第3部分：230 bar 閥適配器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000) |
| EN ISO 12215-1-2000 |
小艇船體結構和尺寸第1部分：材料：熱固性樹脂、玻璃纖維增強材料、基準層壓板 |
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| EN ISO 12215-2-2002 |
小艇船體結構和尺寸第2部分：夾層結構用芯型材料、嵌入材料 |
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| EN ISO 12215-3-2002 |
小艇船體結構和尺寸第3部分：材料：鋼、鋁合金、木材、其它材料 |
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| EN ISO 12215-4-2002 |
小艇船體結構和尺寸第4部分：車間及生產 |
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| EN ISO 12216-2002 |
小艇窗、船窗、艙口、固定舷窗和門強度和水密封度要求 |
Small craft - Windows, portlights, hatches, dead-lights and doors - Strength and watertightness requirements (ISO 12216:2002) |
| EN ISO 12217-1-2002 |
小艇穩定性及浮力的評估和分類第1部分：船體長度大于或等于6m的非帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002) |
| EN ISO 12217-2-2002 |
小艇穩定性及浮力的評估和分類第2部分：船體長度大于或等于6m的帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002) |
| EN ISO 12217-3-2002 |
小艇穩定性及浮力的評估和分類第3部分：船體長度小于6m的小船 |
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002) |
| EN ISO 12224-1-1998 |
實芯和藥芯軟釬焊絲規范和試驗方法第1部分：分類和性能要求 |
Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997) |
| EN ISO 12224-2-1999 |
軟釬焊用藥芯焊絲規范和試驗方法第2部分：釬劑含量的測定 |
Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997) |
| EN ISO 12224-3-2003 |
實芯和藥芯軟釬焊絲規范和試驗方法第3部分：測定藥芯軟釬焊絲效果的濕平衡法 |
Solder wire, solid and flux cored - Specifications and test methods - Part 3: Wetting balance test method for flux core solder wire efficacy (ISO 12224-3:2003) |
| EN ISO 12228-1999 |
動植物油脂甾醇和總甾醇含量的測定氣相色譜法 |
Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999) |
| EN ISO 12236-1996 |
土工布及相關產品靜態頂破試驗(CBR試驗) |
Geotextiles and geotextile-related products - Static puncture test (CBR-Test) (ISO 12236:1996) |
| EN ISO 12241-1998 |
建筑設備和工業裝置絕熱計算規則 |
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998) |
| EN ISO 1234-1997 |
開口銷 |
Split pins (ISO 1234:1997) |
| EN ISO 12543-1-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第1部分：定義和零部件的描述 |
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998) |
| EN ISO 12543-2-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第2部分：夾層安全玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998) |
| EN ISO 12543-3-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第3部分：夾層玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998) |
| EN ISO 12543-4-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第4部分：耐久性檢驗方法 |
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) |
| EN ISO 12543-5-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第5部分：尺寸和板邊精加工 |
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998) |
| EN ISO 12543-6-1998 |
建筑玻璃夾層玻璃和夾層安全玻璃第6部分：外觀 |
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998) |
| EN ISO 12567-1-2000 |
門、窗熱性能熱箱法測定傳熱系數第1部分：整樘門和窗 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000) |
| EN ISO 12569-2000 |
建筑物熱性能建筑物的換氣率測定示蹤氣體稀釋法 |
Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000) |
| EN ISO 12570-2000 |
建筑材料和制品的濕熱性能高溫干燥法測定含濕率 |
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000) |
| EN ISO 12571-2000 |
建筑材料和制品濕熱性能吸濕性質的測定 |
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000) |
| EN ISO 12572-2001 |
建筑材料及制品的溫濕性能透水蒸汽性的測定 |
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001) |
| EN ISO 1264-1997 |
塑料氯乙烯均聚物和共聚物樹脂水萃取物的pH值測定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980) |
| EN ISO 1265-1997 |
塑料聚氯乙烯樹脂雜質和外來雜質數的測定 |
Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles (ISO 1265:1979) |
| EN ISO 12676-2003 |
耐火制品耐一氧化碳性的測定 |
Refractory products - Determination of resistance to carbon monoxide (ISO 12676:2000) |
| EN ISO 12677-2003 |
用XRF法作耐火制品的化學分析熔化鑄珠法 |
Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com